Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹4.3 L
Closing Date
6 Apr 2026, 11:00 amClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
10 conditions · 4 needing a document upload
Requisite earnest money, (ON ONLINE mode (No Documentary Proof required))
Cost of tender document
Requisite earnest money ,(ONLINE mode )
PAN CERTIFICATE : PAN The tenderer shall submit the photocopy of Permanent Account Number (PAN) issued by Income Tax authority attested by Gazetted officer / self attested.
GSTIN number: Bidder shall submit the photocopy of GSTIN number
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions. Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderers are required to upload PAN Certificate, GSTIN Certificate as well as Certificates as per Annexure-9, Annexure-10, Annexure-11, Annexure-12, Annexure-13, Annexure-14, Annexure-15, Annexure-16, Annexure-18, Annexure-20 & Annexure-21 without which the offer is liable to be rejected.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Design, supply, erection, testing & commissioning of 25KV OHE work in connection with new lines at SINA station on BAHL- BRML section over Jammu Division.
17-E-C-TRD-SINA-25R
17-E-C-TRD-SINA-25R
Open
Works - General
12 Months
Ramban, Jammu And Kashmir
₹0
₹4.3 L
6 Apr 2026
4 Mar 2026
19 Mar 2026
166 items across 5 schedules · ₹5,55,38,180.28 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Preparation of drawing as per RDSO design for Over Head Equipment | Per Track KM | 7.00 | 11,347.3 | 79,431.1 |
| 2 | Supply of Concrete for foundation and plinth in other than hard & rocky soil | cum | 500.00 | 6,739.54 | 33,69,770 |
| 3 | Erection of Concrete for foundation and plinth in other than hard & rocky soil | cum | 500.00 | 1,652.95 | 8,26,475 |
| 4 | Supply of galvanized steel fabricated masts / other supporting structure | MT | 140.00 | 1,33,140.05 | 1,86,39,607 |
| 5 | Erection of galvanized steel fabricated masts / other supporting structure | MT | 140.00 | 9,841.96 | 13,77,874.4 |
| 6 | Supply of fabricated and galvanized steel work (SPS) other than mast with necessary components | MT | 24.00 | 1,36,183.45 | 32,68,402.8 |
| 7 | Erection of fabricated and galvanized steel work (SPS) other than mast with necessary components | MT | 24.00 | 9,062.7 | 2,17,504.8 |
| 8 | Supply of Single bracket assembly (without insulator) | Numbers | 230.00 | 21,636.61 | 49,76,420.3 |
| 9 | Erection of Single bracket assembly | Numbers | 230.00 | 2,111.39 | 4,85,619.7 |
| 10 | Supply of Stay Arm composite insulator CD 1600 mm as per RDSO Spec. No. TI/SPC/OHE/INSCOM/1072 or latest. | Numbers | 230.00 | 1,701.82 | 3,91,418.6 |
| 11 | Supply of Bracket Composite Insulators CD 1600 mm as per RDSO. Spec. No. TI/SPC/OHE/INSCOM/1071(Rev-01) or latest. | Numbers | 230.00 | 1,807.23 | 4,15,662.9 |
| 12 | Erection of insulators for single bracket assembly | Set | 230.00 | 1,390.8 | 3,19,884 |
| 13 | Supply of OHE with complete fitting (For Conventional type) without Contact & Catenary Wires as per explanatory Notes | Per Track KM | 7.00 | 28,419.37 | 1,98,935.59 |
| 14 | Erection of OHE with complete fitting (For Conventional type) without Contact & Catenary Wires as per explanatory Notes | Per Track KM | 7.00 | 28,404.66 | 1,98,832.62 |
| 15 | Supply of copper jumper wire | Numbers | 45.00 | 7,457.92 | 3,35,606.4 |
| 16 | Erection of copper jumper wire | Numbers | 45.00 | 731.88 | 32,934.6 |
| 17 | Supply of Guy Rod Assembly | Numbers | 20.00 | 10,432.99 | 2,08,659.8 |
| 18 | Erection of Guy Rod Assembly | Numbers | 20.00 | 1,226.2 | 24,524 |
| 19 | Supply of Composite 9T Insulators (CD 1600mm) as per RDSO Specification TI/SPC/OHE/INSCOM/1070 (Rev-1) or latest. | Numbers | 45.00 | 2,072.37 | 93,256.65 |
| 20 | Erection of 9-Tonne insulator | Numbers | 45.00 | 1,406.26 | 63,281.7 |
| 21 | Supply of 9 tonne suspension insulator assembly including all accessories | Numbers | 20.00 | 5,015.42 | 1,00,308.4 |
| 22 | Erection of 9 tonne suspension insulator assembly including all accessories | Numbers | 20.00 | 1,000.2 | 20,004 |
| 23 | Supply of regulating equipment 3 pulley type ATD with counter weight | Numbers | 12.00 | 72,740.08 | 8,72,880.96 |
| 24 | Erection of regulating equipment 3 pulley type ATD with counter weight | Numbers | 12.00 | 4,222.79 | 50,673.48 |
| 25 | Supply of Section Insulator assembly including bar insulator assembly for conventional OHE | Numbers | 15.00 | 54,983.62 | 8,24,754.3 |
| 26 | Erection of Section Insulator assembly including bar insulator for conventional OHE | Numbers | 15.00 | 3,366.41 | 50,496.15 |
| 27 | Supply (without insulator) of 25KV Single Pole(SP) Isolator without earth contact assembly | Numbers | 6.00 | 51,738.44 | 3,10,430.64 |
| 28 | Erection of 25KV Single Pole(SP) Isolator without earth contact assembly | Numbers | 6.00 | 4,510.18 | 27,061.08 |
| 29 | Supply of 25KV post / pedestal insulators for isolators | Numbers | 40.00 | 8,953.89 | 3,58,155.6 |
| 30 | Erection of 25KV post / pedestal insulators for isolators | Numbers | 40.00 | 383.1 | 15,324 |
| 31 | Supply of an Earth contact assembly in an isolator | Numbers | 6.00 | 7,985.94 | 47,915.64 |
| 32 | Erection of an Earth contact assembly in an isolator | Numbers | 6.00 | 1,117.49 | 6,704.94 |
| 33 | Supply & erection of post and operating rod insulator | Numbers | 6.00 | 20,112.5 | 1,20,675 |
| 34 | Supply of copper bus bar 18mm | Metre | 120.00 | 1,390.33 | 1,66,839.6 |
| 35 | Erection of copper bus bar 18mm | Metre | 120.00 | 122.93 | 14,751.6 |
| 36 | Supply of single earth electrode with earth pit complete as per RDSO Drg No. ETI / OHE / P / 7020 or latest | Numbers | 20.00 | 4,137.27 | 82,745.4 |
| 37 | Erection of single earth electrode with earth pit complete as per RDSO Drg No. ETI / OHE / P / 7020 or latest | Numbers | 20.00 | 1,343.47 | 26,869.4 |
| 38 | Manufacturing supply of Retro Reflective type structure Number plate as per RDSO drg. No.ETI / OHE / P / 7503 or latest along with all fixing arrangement. | Numbers | 120.00 | 676.28 | 81,153.6 |
| 39 | Erection / Fixing of Retro Reflective type structure Number plate as per RDSO drg. No.ETI / OHE / P / 7503 or latest along with all fixing arrangement. | Numbers | 120.00 | 85.13 | 10,215.6 |
| 40 | Supply of material without insulators for termination of OHE conductor | Numbers | 12.00 | 7,226.18 | 86,714.16 |
| 41 | Erection of material for termination of OHE conductor | Numbers | 12.00 | 1,018.06 | 12,216.72 |
| 42 | Supply of splicing and extension of anchored over head equipment with components | Numbers | 12.00 | 6,310.36 | 75,724.32 |
| 43 | Erection of splicing and extension of anchored over head equipment with components | Numbers | 12.00 | 5,676.3 | 68,115.6 |
| 44 | Supply of Structure Bonds | Numbers | 120.00 | 896.08 | 1,07,529.6 |
| 45 | Erection of Structure Bonds | Numbers | 120.00 | 221.8 | 26,616 |
| 46 | Supply of Transverse (cross rail, inter-track, Z & special type) bonds | Numbers | 50.00 | 1,050.94 | 52,547 |
| 47 | Erection of Transverse (cross rail, inter-track, Z & special type) bonds | Numbers | 50.00 | 151.73 | 7,586.5 |
| 48 | Supply of Longitudinal bonds | Numbers | 90.00 | 667.99 | 60,119.1 |
| 49 | Erection of Longitudinal bonds | Numbers | 90.00 | 141.79 | 12,761.1 |
| 50 | Supply of earth bus | Metre | 120.00 | 228.06 | 27,367.2 |
| 51 | Erection of earth bus | Numbers | 120.00 | 80.37 | 9,644.4 |
| 52 | Erection of bonds on platform area including drilling of holes in structure and rail including cutting of platform surface100mm x 500mm placing of bond and making good surface with PCC and providing cleats as per latest RDSO drawing | Numbers | 70.00 | 2,839.56 | 1,98,769.2 |
| 53 | Supply and fixing of cleat 02 Nos. for each structure Bond on platform wall with screw | Numbers | 70.00 | 98.37 | 6,885.9 |
| 54 | Platform cutting and covering with concrete according to Bond size | Numbers | 70.00 | 351.33 | 24,593.1 |
| 55 | Inspection, removal of existing Bonds, providing chamfering, refixing of existing bonds, painting where necessary of existing Bonds at designated locations | Per Track KM | 1.00 | 37,372.44 | 37,372.44 |
| 56 | Erection of Contact Wire only after dismentling of Catenary wire under FOB (Overline structure) | Kilometre | 1.00 | 17,728.36 | 17,728.36 |
| 57 | Supply for Reprofiling of existing OHE: (i) To maintain vertical gap between mail line & turn out contact wire between 50 to 60 mm at obligatory mast. (ii) To maintain 50 mm gap, 5m distance from obligatory mast. (iii) To maintain 40 to 50 mm gap, 10m distance from obligatory mast. (iv) To change presag from 100 mm to 50 mm. (v) Reduction of gradient from 3mm/m to 2mm/m & relative gradient from 1.5 mm/m to 1 mm/m. | Kilometre | 1.00 | 1,02,326.58 | 1,02,326.58 |
| 58 | Erection for Reprofiling of existing OHE: (i) To maintain vertical gap between mail line & turn out contact wire between 50 to 60 mm at obligatory mast. (ii) To maintain 50 mm gap, 5m distance from obligatory mast. (iii) To maintain 40 to 50 mm gap, 10 m distance from obligatory mast. (iv) To change presag from 100mm to 50 mm. (v) Reduction of gradient from 3mm/m to 2mm/m & relative gradient from 1.5 mm/m to 1 mm/m. | Kilometre | 1.00 | 19,760.46 | 19,760.46 |
| 59 | Supply of Contact wire Ending Clamp | Numbers | 30.00 | 400.31 | 12,009.3 |
| 60 | Supply of Catenary wire Ending Clamp | Numbers | 30.00 | 677 | 20,310 |
| 61 | Supply of electrolytic Copper Hard drawn Dropper wire 5mm dia | Kg | 25.00 | 1,063.13 | 26,578.25 |
| 62 | Erection of electrolytic Copper Hard drawn Dropper wire 5mm dia | Kg | 25.00 | 158.95 | 3,973.75 |
| 63 | Dismentling of OHE termination assembly | Numbers | 6.00 | 1,492.22 | 8,953.32 |
| 64 | Dismentling & removal of Anchor assembly | Numbers | 6.00 | 1,161.49 | 6,968.94 |
| 65 | Supply of Anti-Creep with componenet | Numbers | 10.00 | 40,484.92 | 4,04,849.2 |
| 66 | Erection of Anticreep with component | Numbers | 10.00 | 3,406.34 | 34,063.4 |
| 67 | Dismantling of Bracket Assembly | Numbers | 30.00 | 1,625.79 | 48,773.7 |
| 68 | Reclaimation of OHE mast | Numbers | 5.00 | 4,455.12 | 22,275.6 |
| 69 | Cutting and removal of existing structure | Numbers | 10.00 | 1,123.3 | 11,233 |
| 70 | Dismantling of Guy Rod Assembly | Numbers | 6.00 | 769.19 | 4,615.14 |
| 71 | Dismantling of fabricated steel other than mast | MT | 3.00 | 15,795.77 | 47,387.31 |
| 72 | Dismantling of copper jumper | Numbers | 15.00 | 682.52 | 10,237.8 |
| 73 | Shifting of ATD / BWA from one mast to another | Each Span | 16.00 | 4,165.64 | 66,650.24 |
| 74 | Raising / Restoration of OHE height as per OHE profile by Change of incumbrance / Re-droppering of span | Each Span | 40.00 | 1,909.29 | 76,371.6 |
| 75 | Adjustment of Turnout or insulated / un-insulated overlap | Numbers | 6.00 | 1,873.45 | 11,240.7 |
| 76 | Dismantling of Three Puley type ATD & termination | Numbers | 6.00 | 4,217.54 | 25,305.24 |
| 77 | Dismantling of section insulator assembly | Numbers | 6.00 | 3,510.91 | 21,065.46 |
| 78 | Dismantling of 9-Tonne insulator | Numbers | 6.00 | 748.88 | 4,493.28 |
| 79 | Dismantling of Pedestal insulator | Numbers | 10.00 | 667.97 | 6,679.7 |
| 80 | Dismentling of an Isolator | Numbers | 3.00 | 2,386.01 | 7,158.03 |
| 81 | Dismentling of Anticreep | Numbers | 6.00 | 2,242 | 13,452 |
| 82 | Slewing of OHE (including Restoration of OHE) | Each Span | 25.00 | 1,676.46 | 41,911.5 |
| 83 | Transfer of equipment from one support to another | Numbers | 4.00 | 3,468.59 | 13,874.36 |
| 84 | Supply of Large Copper Jumper wire 160 Sqmm | Metre | 120.00 | 2,195.88 | 2,63,505.6 |
| 85 | Erection of Large Copper Jumper wire 160 Sqmm | Metre | 120.00 | 393.36 | 47,203.2 |
| 86 | Supply of Large Span Wire (130 Sq mm) | Metre | 200.00 | 982.78 | 1,96,556 |
| 87 | Erection of Large Span Wire (130 Sq mm) | Metre | 200.00 | 158.36 | 31,672 |
| 88 | Supply of Large Span Ending (130 Sq mm) | Numbers | 10.00 | 833.51 | 8,335.1 |
| 89 | Erection of Large Span Ending (130 Sq mm) | Metre | 10.00 | 79.95 | 799.5 |
| 90 | Supply of 150sq mm hard drawn copper cross feeder with component | Kilometre | 0.25 | 12,49,517 | 3,12,379.25 |
| 91 | Erection of 150sq mm hard drawn copper cross feeder with component | Kilometre | 0.25 | 8,206.79 | 2,051.7 |
| 92 | Preparation of computerized OHE Layout Plan (LOP) for station Yards | Per Track KM | 7.00 | 5,281.36 | 36,969.52 |
| 93 | Fabrication, developing and supply of fabricated Sectioning Diagram, Schematic and TSWR diagram Boards with computerized digital printing on adhesive Venyle of adequate size as per requirement | Square Foot | 40.00 | 1,955.08 | 78,203.2 |
| 94 | Re-painting on existing OHE structures with water proof yellow enameled paint as per explanatory notes(Rate included material & erection) | Sqm | 50.00 | 23.32 | 1,166 |
| 95 | Re-writing on existing OHE structures as per explanatory notes(Rate included material & erection) | Sqm | 50.00 | 418.01 | 20,900.5 |
| 96 | Supply and erection of "Electric Engine Stop" Board size 900x600x 2mm with supply of fixing material (Clamp, back flat strip & fasteners) | Numbers | 15.00 | 4,141.35 | 62,120.25 |
| 97 | Supply and erection of "Caution unwire turnout" Board size 900x600x 2mm with supply of fixing material (Clamp, back flat strip & fasteners) | Numbers | 15.00 | 2,802.13 | 42,031.95 |
| 98 | Supply and erection of "Caution live wire" Board size 400x270x 2mm with supply of fixing material (Clamp, back flat strip & fasteners) | Numbers | 15.00 | 2,442.52 | 36,637.8 |
| 99 | Supply and erection of "Caution clearance to OHE nearby restricted" Board size 450x270x 2mm with supply of fixing material (Clamp, back flat strip & fasteners) | Numbers | 15.00 | 1,353.31 | 20,299.65 |
| 100 | Supply and erection of "Power Block Working Limit" Board size 450x450x2mm with supply of fixing material (Clamp, back flat strip & fasteners) | Numbers | 15.00 | 1,526.74 | 22,901.1 |
| 101 | Supply and erection of "Protective Area" Board size 12"x18" with supply of fixing material (Clamp, back flat strip & fasteners) | Numbers | 15.00 | 2,787.28 | 41,809.2 |
| 102 | Manufacturing, Supply & erection of Engine Stop Board of size 600 x 900 mm made of 2 mm thk. Aluminium alloy sheet | Numbers | 15.00 | 2,284.3 | 34,264.5 |
| 103 | Supply of various types 25KV caution Board / Plates as per explanatory Notes | Numbers | 25.00 | 374.27 | 9,356.75 |
| 104 | Erection of various types 25KV caution Boards / plates as per explanatory Notes | Numbers | 25.00 | 89.02 | 2,225.5 |
| 105 | Supply of various types of 25KV Danger Boards / plates as per explanatory notes | Numbers | 25.00 | 504.69 | 12,617.25 |
| 106 | Erection of various types of 25KV Danger Boards / plates as per explanatory notes | Numbers | 25.00 | 64.13 | 1,603.25 |
| 107 | Design, manufacturing, supply of Retro Reflective type Sigma Board with non- reflective black ground as per RDSO drg. No. TI/Drg/OHE/PLTBRD/RDSO/ 00036/12/0 (Size 450 mm x 600 mm) and RDSO specification No. ETI/OHE/33A (12/97) Rev. 8 or latest including transportation and all taxes etc. | Numbers | 12.00 | 1,809.36 | 21,712.32 |
| 108 | Cost of 4 Nos. 12mm dia GI nuts & bolts 300 mm long (fully threaded) with necessary washer, spring washer for different OHE Mast / Portals etc including transportation and all taxes | Set | 20.00 | 248.61 | 4,972.2 |
| 109 | Cost of GI backing angle for mounting arrangement size 40x40x5x450mm (4 Nos.) including transportation and all taxes | Set | 20.00 | 425.37 | 8,507.4 |
| 110 | Erection of clamps-GI backing angle for arrangement size 40x40x5x450mm (4 Nos.) 12mm dia GI nuts & bolts 300 mm long (fully threaded) with necessary washer, spring washer including Retro Reflective type sigma board with non reflective back ground at different OHE Mast / Portals etc including transportation and all taxes | Set | 20.00 | 315.12 | 6,302.4 |
| 111 | Interlocking system for isolator make interprosing consisting: a) Bolt lock type L insertion A-01; b) Lock with key exchange box with key incription B & A | Set | 6.00 | 13,888.45 | 83,330.7 |
| 112 | Labour charges for fitting of interlocking system | Set | 6.00 | 1,084.35 | 6,506.1 |
| 113 | Supply of Anti-Bird Disc as per drawing No. TI/DRG/OHE/Anti- Bird/00001/00/01 (Sh-1 & Sh- 2) or latest | Numbers | 70.00 | 644.95 | 45,146.5 |
| 114 | Breaking of all type of Foundations of mast / Portal / TTC etc | Numbers | 15.00 | 3,851.8 | 57,777 |
| 115 | Handling, Leading, loading and Transportation charges for Railway supply material from different Railway sites and released material from different Railway sites, if any to concerned TRD Depot | MT | 5.00 | 2,780.61 | 13,903.05 |
| 116 | supply of shock treatment chart | Numbers | 2.00 | 1,795.23 | 3,590.46 |
| 117 | Erection of shock treatment chart | Numbers | 2.00 | 364.4 | 728.8 |
| 118 | Supply of Fire buckets | Numbers | 8.00 | 727.95 | 5,823.6 |
| 119 | Supply of Fire extinguisher | Numbers | 8.00 | 3,639.79 | 29,118.32 |
| Schedule total | ₹4,21,89,897.53 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
1.Similarnatureofwork-OHEPSI.pdf
ATTACHMENT
Letterregfardingpartnershipfirm.pdf
ATTACHMENT
ClarificationregardingsubmissionofAnnexure-VofGCC.pdf
ATTACHMENT
InstructionforincorporatingtheJPOCircularetc_ProvisionsintheTenderDocumentforallworksrequiringdiggingworksclosetoRly.pdf
ATTACHMENT
finaltenderdoctrdsinawork2ndtime.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .