CONSTRUCTION OF CERTAIN TECHNICAL AND DOMESTIC INFRASTRUCTURE AT AFS JORHAT

Amount

GENERAL SUMMARY NOTE: Schedule ‘A’ Part II to VI are prepriced by MES under Ser Nos. 2.00 to 6.00. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only.

SCHEDULE "A" PART -I (BUILDING WORK/ HANGER) Design, Construction and Erection of Pre-Engineered Buildings with suitable RCC foundation as per soil investigation report for loading offloading point (Hanger) with roofing and cladding of camouflage pattern Pre-coated Galvalume Steel Sheet 0.55 mm TCT AZ 150 and yield strength of 550 MPA alongwith poly-carbonate sky light & Turbo - ventilator in roofing and gable portion, including one steel gate of size 8m x 5m, Ramp on both side of Hanger, anchor bolts, base plates and all structural steel items, anti bird proofing, rain water eaves gutters and down take pipes etc. complete all as specified and as shown on approved drawings.. Note for item No 1.01 :- (i) PEB structure to be designed to withstand 180 Km/hr (both in line and cross winds) and based on soil parameters. (ii) The rate quoted shall deemed to include the cost of designing and vetting of design of PEB structures by IISC Bangalore/ IITs/ NITs. The design (showing full calculations and details) vetted by IISc Bangalore/ IITs/ NITs shall be submitted to the department as per time schedule. (iii) Suitable eves gutters and rainwater downtake pipes as required shall be provided to divert rain water from the roof to ground level . (iv) The rate quoted is deemed to include the cost for provision of necessary arrangement for fixing light fittings. (v) Size of Hanger shall be as per Architechtural drawings.

SCHEDULE "A" PART-II (SITE CLEARANCE, EARTH WORK AND EXCAVATION) Details of prepriced Schedule is given in tender documents

SCHEDULE "A" PART-III (INTERNAL ELECTRIFICATION) Details of prepriced Schedule is given in tender documents

SCHEDULE "A" PART-IV (LIGHTENING PROTECTION) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-V (ROAD/ PATH/ CULVERT) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VI (EXTERNAL ELECTRIFICATION) Details of prepriced Schedule is given in tender documents.

Note:- Schedule ‘A’ Part I & VII are not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col.' 6 ' signifies this fact only.

SCHEDULE "A" PART -VII (MISCELLANEOUS ITEMS) Note:- This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col.' F ' signifies this fact only.

LIGHTNING PROTECTION S&F DWC pipe 40 mm dia bore with all fittings, laid in trench, light grade for mechanical protection of earth strip of earthing complete all as specified and as directed.

M&L earthing complete with copper earth plate electrode 600mm x 600mm x 3 mm thick buried directly in ground vertically to a depth not less than 2.25 m deep below ground level connected to copper strip 20 x 3 mm as earthing lead by brass nut bolts washer made out of GI mild steel and 32mm dia GI medium grage for protection of earth lead and connected to test point or as directed including PCC Pit in Cement Concrete 1:3:6 (20mm Graded Stone Aggregate) and RCC Cover of size 450X450X50mm in RCC 1:2:4 (20mm Graded Stone Aggregate) Reinforced with and including 8.0mm dia TMT Bars @ 100mm centre to centre both ways, Galvanised Iron Wire Mesh, Funnel, Galvanised Iron Watering Pipe 20mm Bore (dia) Medium Grade, necessary Excavation in Soft/ Loose Soil, returning, filling in and removal of surplus Soil upto a distance of 50.00 mtr and all as shown in Electrical Plate No. 5 of MES Schedule Part-I and Testing on completion, complete all as specified and as directed Engr-in-charge.

EXTERNAL ELECTRIFICATION M&L for PVC sheathed copper cable of 1.5 sqmm, 3 core cable for street light connection on pole from Junction box to light fitting complete all as specified & directed.

Supply and erection of 8 m height Hot dip galvanised octagonal pole made of HT steel of grade S355 of BSEN 110025 with 130 mm bottom A/F & 70 mm top A/F made up of 3mm thick G.I. sheet along with base plate of size 200 x 200 x 16 mm thick with and including suitable foundation as per manufacturer recommendation, 4Nos of M24 X 7500mm long J' type EN 8 grade foundation bolts along with template Junction box with one 6A SP MCB and 16 sq mm Stud type connector ( three phase 63 Amps) Bakelite sheet suitable for 4Cx 16Sq mm cable and Galvanized bracket of length 0.75 m for fixing of LED street light as directed. Note:- Dia of the bracket should for LED light fittings shall be as per manufacturer's recommendation to be fitted on the pole.

Labour only for Horizontal Boring for Passing Protection Pipe up to 80mm Bore (dia), under Road /Foot Path, not exc. 10.00 mtr in a Single Length; complete all as specified and as directed. Note : Pipe to be measured and paid separately.

INTERNAL ELECTRIFICATION Supply and fix Industrial type High bay luminary light of 120 Watt, 5700/6000K Aluminium housing, thermal efficient, suitable for ceiling (Surface/Suspended) mounting with system efficacy not less than 100 lm/W with all accessories, connector block, prewired and including connecting up with flexible copper conductor of suitable size compete all as specified and as directed.

Material and labour in repair for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion.

M/S Janak Raj Gumber

MAA BHAGWATI ASSOCIATES

Phoenix Infra

MS SHRI B.C. DAS

United Sales Corporation

LLOYD INSULATIONS INDIA LIMITED