SPECIAL REPAIR TO BLDG NO T-11, BLDG NO P-194, BLDG NO P-138, PROVN OF SHED BEHIND BLDG NO P-75, 01 X 500 LTR DEEP FREEZER AND 01 X 499 LTR REFRIGERATOR, SHED FOR OPEN BATHING AND WASHING, COVERED SHED IN FRONT OF B COY AND INTERLOCKING TILES BETWEE

Amount

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws, complete all as specified and directed.

S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws, complete all as specified and directed.

Taking down cement plaster on any description on brick or stone wall etc, incl hacking out joints for key,sucrubbing with water etc., complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on concrete surfaces finished even and fair without using extra cement including mixing of water proofing compound of approved make as per manufacturers instructions on existing surfaces complete all as specified and directed.

Supply only Integral water proofing compound, complete all as specified and directed.

M&L for cleaning of roof slab surfaces including sweeping clean & washing down with water to remove dust & providing water proofing treatment with polymeric standard water proofing membrane complete all as specified and directed. (a) M&L preparation of plaster surfaces /RCC roof surfaces and applying one coat of oil bound bituminous primer @0.03 ltr/Sqm (b) M&L applying blown type bitumen @1.20Kg/Sqm of grade 85/25 (c) Supplying and laying modified polymeric water proofing membrane super thermo lay 3mm thick of weight not less than 3.00kg /sqm reinforced with polyester non woven fabric weight not less than 150gm/sqm center core including coping on the surfaces with torch application of membrane with 10cm over laps as required all complete all as specified and directed . (d) Applying two coats of aluminium paint @ 0.2 kg/sqm complete all as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F GI frame work for ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 & 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section(not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.50mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre. size of grid 605mmx605mm incl Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

M&L for 4mm thick non asbestos fibre cement building boards white/ off white (E board designer) fixed or laid /inserted to timber/ GI/ Aluminium frame work with screws in ceiling flat or sloping complete all as specified and directed.

Dismantling floor hearth and wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for Non Skid ceramic colored tiles 7 to 8 mm thick(square/ rectagular) area of each tile exc.0.11 sq m but n. exc. 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement morat 1:6 complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 450x350x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and incl provn of 10 mm thick backing coat in CM 1:4, complete all as specified and directed.

Demolition of cement concrete (un-reinforced ) in ground floor and paving not exc. 15 cm thick (below and above ground level) complete all as specified and as directed.

M&L for 75 mm thick PCC 1:4:8, Ttpe D-2, using 40mm graded crushed stone aggregate as in sub base of floor ,complete all as specified and directed.

M&L for machine cut kota stone slab 18-20 mm thick, laid over and including 20mm thick screed bed in cement mortar (1:6) using coarse sand as in flooring, set & jointed in neat grey cement slurry and ponted in white cement mixed with pigment to match including grinding and polishing to granite finish, complete all as specified and directed.

M&L for machine cut Kota stone slab 18-20 mm thick, laid over and including 10mm thick rendering in cement mortar (1:4) using coarse sand as in vertical surfaces, set & jointed in neat grey cement slurry and ponted in white cement mixed with pigment to match including grinding and polishing to granite finish, complete all as specified and directed.

Taking down chowkhats or frames n.exc 1.5 sqm (without taking off shutter from the frame) each and removing from the site including dismantling brick work for hold fasts etc. complete all as specified and directed.

Taking down chowkhats or frames exc 1.5 sqm but n.exc 4 sqm (without taking off shutter from the frame) each and removing from the site including dismantling brick work for hold fasts etc., complete all as specified and directed.

S&F steel windows of profile rectangular tube section with side hung shutters incl projecting type hinges with steel handles, MS peg stay with glazing bars, complete all as specified and directed.

S&F steel windows of profile rectangular tube section with side hung shutters incl projecting type hinges with steel handles, MS peg stay without glazing bars, complete all as specified and directed.

S&F steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.

S & F for Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders framed balusters, walk ways, railings, and similar work conforming to Fe-290 Gde-E-165, complete all as specified and directed.

S & F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane, complete all as specified and directed.

S&F Pressed steel frames of size 125 x 60 mm for doors with one or more rebates including supply & fixing lugs,125 mm size including MS hinges, lock strike plate, etc., ccomplete all as specified and directed.

S&F Pressed steel frames of size 105 x 60 mm for doors with one or more rebates including supply & fixing lugs,125 mm size including MS hinges, lock strike plate, etc., complete all as specified and directed.

S&F 35mm thick flush shutter , solid core construction with block board core and plywood face panels, both faces are covered with decorative face veneer with lipping/ frame to match complete all as specified and directed.

S&F 35 mm thick factory made glazed & Skelton shutter of IInd class H/Wood open rebated & prepared to receive glass or gauze etc without sash bar open rebated with edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass or guage etc size of stiles rails etc as specified in sec 8 clause 8.24 (a) of SSR Part-I (2010), complete all as specified and directed .

M&L for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45x85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed.

M&L for 35mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed . Note: Stainless steel butt hinges and necessary S S screws shall be measured and paid separately.

S&F stainless steel butt hinges medium weight, cold rolled, 100 mm, complete all as specified and directed.

S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and directed ..

S&F 200 mm aluminium anodized, barrel tower bolts of extruded section, complete all as specified and directed .

Supply and fix 100mm size aluminum handle fabricated, 'D' type, anodized ISI marked complete all as specified and directed.

Supply and fix 150mm size aluminum handle fabricated, 'D' type, anodized ISI marked complete all as specified and directed.

S&F 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy, complete all as specified and directed .

S&F 300mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed .

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplesor MS beads size 2mm to 3mm complete all as specified and directed.

Demolition of brick or stone masonry, built in cement mortar incl all quoins, pillars, arches etc but excluding ashlar facing complete all as specified and directed

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed..

M&L for reuse old brick for brick work (Except bricks) with sub class 'B' bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed.

M&L for brick work with sub class‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4, complete all as specified and directed.

M&L for 75mm thick cement concrete type C-2,1:3:6 (40mm graded aggregate) as in plinth protection, complete all as specified and directed.

M&L for mild steel as in framed work as in doors or gates of angle or other section with gusset plates, rails, braces,etc., complete, drilled for fixing of steel sheeting or other covering doors, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing conforming to Fe-290 Gde E-165, complete all as specified and directed.

S&F 300 mm MS ordinary rat tail rod pattern springs incl roller and roller plate fixed to wooden chowkhats or welded to angle iron door frames complete all as specified and directed.

M&L for PCC 1:3:6, type C-1, using 20 mm graded mechanically crushed stone aggregate as in filling pressed steel frame /hold fast blocks etc complete all as specified and directed.

S&F in repair vitreous china squatting pan "ORISSA" pattern size 580 x 440mm white with integral foot rests complete including provn of lime concrete bedding making good for floor with PVC SWR 'P' or 'S' complete all as specified and directed.

S&F in repair 10 litres capacity, PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair angle cock/ stop valves, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm bore iron pipe or for brass ferrule complete all as specified and directed.

S & F in repair stop valves, cast copper alloy, chromium plated, fancy type, with long shank and cup (concealed type), screwed down, high pressure, with crutch or butter fly handle, screwed both ends for 15mm bore iron pipe or for unions complete all as specified and directed.

S&F in repair bib taps, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair for Chromium plated brass shower rose 125 mm sizewith or witout swivel joints including fxing with 15 mm bore pipe, fixed in repair, complete all as specified and directed.

Dismantling water tanks of capacity exc 250 & n.exc 500 ltrs and removing from site to store, complete all as specified and directed.

S&F for triple layer white colour 500 Ltrs Rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes complete all as specified and directed.

S&F in repair, PVC (SWR) floor trap, 75mm bore, plain with grating including jointing with solvent cemen, complete all as specified and directed.

S&F in repair chromium plated towel rail 20mm dia D type 600 mm long as a approved quality.complete all as specified and directed.

S&F in repair CP brass soap dish complete all as specified and directed.

S&F in repair Vitreous China wash basin , white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified and directed.

S&F in repair pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for 15mm bore iron pipe complete all as specified and directed.

S&F PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe 32mm bore suitable for wash hand basins/ sinks complete all as specified and directed.

S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms), complete all as specified and directed.

Taking up or down steel tubing and connection 15 mm bore pipe and removing from site, complete all as specified and directed.

Taking up or down steel tubing and connection 20 mm bore pipe and removing from site, complete all as specified and directed.

S&F 15mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors complete all as specified and directed.

S&F 20mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors complete all as specified and directed.

M&L for rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 10 mm thick on ceiling in cement mortar (1:3) finished even and smooth without using extra cement, complete all as specified and directed.

M&L for chipping of loose/ damaged / cracked / previously repaired/ weak concrete by chieseling to expose the sound core concrete where ever required and to expose rusted reinforcement upto depth n.exc 50mm , cleaning of reinforced concrete surface by air compressor, complete all as specified and directed.

M&L for :- (i) Removing loose and broken concrete by chieseling/ mechanically etc up to a depth of 40mm from soffit of slab,column,beam, chajja and similar structural members, cutting edges, cleaning the dismantled portion with wire brush etc to make the reinforcement naked and remove dust /dirt/other foreign article etc complete all as specified and directed. (ii) Applying IPH RB-107 polymer based rust -remover(pH value-12) and applying IPH RB-167 Polymer based rust preventive (pH value-9) to all exposed reinforcement bars complete all as specified and directed. (iii) Applying polymer modified cement mortar rendering 15mm average thickness in CM 1:3 on guinted surface duly mixing polymer modified 'Nitoband AR' of make : M/s Fosroc Chemicals India (P) Ltd@ 10 Ltr per bag of cement or equivalent in Harjas Coatings & polymers @ 5% by wt of cement or equivalent make in Dr Fixit of Pidilite Industries complete finished even & smooth without using extra cement all as specified and as per manufacturer's instructions.

S&F MS TMT bar 10mm dia & over, cut to length bent to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping) on flat surfaces, complete all as specified and directed.

M&L for Reinforced cement concrete 1:2:4, (nominal mix) in:-Type B-0, using 12.5mm graded crushed stone aggregate for slabs supported on walls, beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like, complete all as specified and directed.

M&L for preparation of new surfaces of steel and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old painted steel or iron surfaces over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of new wooden surface of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for three coats of white wash including preparation of new plastered wall surfaces of any description complete all as specified and directed.

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed.

M&L for preparation of new plastered surfaces and apply two coat of oil bound distemper over a coat of primer & chalk whitening & smoothening of surface, complete all as specified and directed.

M&L for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including taking down complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including taking down complete all as specified and directed.

S & F 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

S & F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.

PVC (SWR) 75mm vent cowl, complete all as specified and directed.

PVC (SWR) 110 mm vent cowl, complete all as specified and directed.

Demolition of cement concrete (reinforced) as in roof other than ground floor and similar suspended work complete all specified and directed

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; exceeding 200mm thick, Horizontal or sloping, complete all as specified and directed.

M&L for PCC 1:2:4, Type B-1, using 20 mm graded crushed stone aggregate on Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out hard/ dense soil, complete all as specified and directed.

M&L for PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M&L Providing precast cement concrete 1:2:4, type B-1 using 20 mm graded crushed stone aggregate inlandings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1: 6, Complete all as specified and directed.

M&L for salt glazed stone ware drain pipe grade 'A' , laid in trenches and jointed in CM, internal dia of pipe 150 mm incl providing concrete bed to drain pipes 150 mm dia (SGSW) in cement concrete (1:3:6) Type D-2 including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.

Returning filling in incl spreading, levelling, watering and well ramming in layers n.exc 25 cm thick complete all as specified and directed.

Removing excavated materials to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provide for cement concrete unreinforced complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. Note: Stainless steel butt hinges and necessary S S screws shall be measured and paid separately.

M&L for stainless steel hinges, 100 mm long, complete all as specified and directed.

S&F Aluminium tower bolt of extruded section, 200mm length of bolt and fixed with screws, complete all as specified and directed.

S&F 125mm size, aluminium (cast type) anodized, handle and fixed with screws complete all as specified and directed.

Supply only liquid water proofing compound, complete all as specified and directed.

S&F in repair 15 mm fancy type chromium plated fancy type bib tap brass long body with flange screwed down high pressure CP cast copper alloy with crutch or butterfly handles scrwed down suitable for 15mm bore pipe or union in repair complete all as spd.

S & F in repair PVC (SWR) junction single, (Single T 110mm), equal or unequal with access door, complete all as specified and directed.

S&F in repair PVC (SWR) bends, for 110mm bore pipes, with access doors, complete all as specified and directed.

S&F in repair Ball valve of brass, 20mm bore, high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.

S&F CI Gate valve, 20mm bore, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or unions complete all as specified and directed.

S&F CI Gate valve, 15mm bore, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union complete all as specified and directed.

Excavation in post holes n.exc. 0.5 Cum and getting out in Hard/ dense soil, complete all as specified and directed.

M&L for rolled sections FE-410 (Gde-E250), quality - B, as in main and cross beams, hip and jack rafters; purlins where connected to common rafters, post and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment (Fe-290(Gde E 165), complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, but exc 10 cm and not exc 15 cm long with Dia of neck 11-15 mm, complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft and loose soil, complete all as specified and directed.

M&L for broken stone or boulders as hardcore of guage exe 63mm but n exc 100 mm, deposited, spread and levelled in layers n exc. 15 cm thik, watered and rolled/ rammed to a true surface complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8, Type D-2, using 40mm graded crushed stone aggregate as in sub base of floor, complete all as specified and directed.

M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.

M&L for PCC 1:3:6, type C-1, using 20mm graded crushed stone aggregate as drain PCC incl fair finished drain or channel using extra cement including forms, moulds, mitred/ stopped ends etc., complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc., complete all as specified and directed.

M&L for brickwork with subclass `B' old size bricks, straight or curved on plan exc 6m mean radius, built incement mortar 1:4 complete all as specified and directed.

M&L for PCC 1:2:4, type B-0, using 12.5mm graded crushed stone aggregate as in coping incl necessary formwork, weathering, slightly rounded or chamfered angles as directed complete all as specified and directed.

Use and waste of form work to sides & soffits of floor or roof beam beam haunchins girders bressumers lintels cantilevers shelves including over hang supports etc. all as specified (rough finished surface), complete all as specified and directed.

M&L for reinforced concrete pipes, 300 mm bore class NP-2, laid and jointed complete with collar, complete all as specified and directed.

M&L for cement concrete bed to 1:4:8, type D-2, to drain, pipes including packing under, and haunching against the sides of pipes after they are laid and tested in 300mm NP-2 pipes complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.

M&L 75 mm thick Plain cement concrete 1:4:8, type D-2, using 40 mm graded crushed stone aggregates as in sub base finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for Cement concrete Chequered cement concrete tiles 30cmx30cmx25mm thick, with grey pigment cement and pigment set and jointed and pointed in neat cement slurry in floor over 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for PCC 1:2:4, Type B-1,using 20 mm graded crushed stone aggregate as in cills and other similar bands, plinth courses, parapets, copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work, complete all as specified and directed.

M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

S&F for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and directed.

M&L for 20mm thick screed bed or bedding layer in CM 1:6 for laying floor tiles complete all as specified and directed.

M&L for chequered cement concrete tiles pre polished 30cmx30cmx22-25mm thick, set ,jointed and pointed in neat cement slurry with grey cement and pigment in floors, complete all as specified and directed.

Supply, fixing, testing and commissioning of Deep freezer Flat Glass Top of 500 litre capacity Electric driven single phase 240 Volt AC, complete all as specified and directed.

S&F double door refrigerator, electric driven (single phase), capacity 400/360 Litres. BEE 5 star rated complete all as specified and directed.

S&F Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type with copper wound, desined for input voltage between 170 Volts to 280 Volts with output voltage stabilized at 230 Volt with accuracy of +/-2.5% and of capacity 3.0 KVA with low and high voltage cut off for 2 to 3 time dealy relay complete all as specifed and directed.

Taking down carefully point wiring from existing place (light/fan, socket or power points complete) with all fittings such as switches, sockets ceiling rose , pendant holder, fitting and fixtures , MCB, Main switches, call bell etc and making good to disturbed surface to wall ,floor etc to match with existing surface either by using same colour distemper or white colour wash complete all as specified and directed.

Taking down carefully by unscrewing from boards/outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings andfittings, bulk head fittings, tube light fittings and regulators, DBs, MCBs etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse), complete all as specified and directed.

M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated (FRLSH) and unsheathed size 1.5 sqmm with concealed Conduit with fixing accessories, to be fixed , for one light /fan/bell point controlled by one switch with pressed steel concealed terminal boxes covered with 3mm thick laminated sheet incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly, colour code of wires as per specification, complete all as specified and directed.

One 3 pin socket outlet 6amps, on the same board with other switches with cable 1.5 Sqmm size complete all as specified and directed.

One 3 pin 15 Amp socket independent but with 2.5 q mm PVC insulated unsheathed copper stranded conductor and earth wire with 2.5 Sqmm, complete all as specified and directed.

S&F switch piano, flush type, 5/6 Amps, single pole complete all as specified and directed.

S&F ceiling rose polycarbonate body, 65 x 20 mm three terminal complete all as specified and directed.

Labour only for point wiring with colour coding multistranded copper conductor cable, PVC insulated (FRLSH) and unsheathed size 1.5 sqmm with concealed Conduit with fixing accessories, to be fixed , for one light /fan/bell point controlled by one switch with pressed steel concealed terminal boxes covered with 3mm thick laminated sheet incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly, colour code of wires as per specification, complete all as specified and directed.

One 5 pin 5/6 Amp socket on the same board, complete all as specified and directed.

One 5 pin 5/6 Amp socket on independent board, complete all as specified and directed.

One 3 pin 15 Amp socket independent but with 2.5 q mm PVC insulated unsheathed copper stranded conductor and earth wire with 2.5 Sqmm, complete all as specified and directed.

Fixing only for switch piano, flush type, 5/6 Amps, single pole complete all as specified and directed.

Fixing only for socket 3/5 pins combined, 6 Amp, flush type (multi purpose), 230volt complete all as specified and directed.

Fixing only for Socket 15 Amps flush type, 6 Pin, 230 Volts , AC complete .

Fixing only for switch 15 Amps flush type 230 Volts , AC complete.

Fixing only for ceiling rose polycarbonate body, 65 x 20 mm three terminal complete all as specified and directed.

Fixing only for for lamp holder pvc body with back plate complete with 9 Watt LED lamp warm type

S&F sheet metal enclosures for MCB distribution board SPN 8 way double door type with 200 amp rated bus bar and suitable for SPN Isolator as incomer complete all as specified and directed.

S&F MCB SPN 32 to 40 Amps 230V incl all termnials, fitting etc. complete all as specified and directed.

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning, complete all as specified and directed.

Refixing only for Distribution board 8 way including MCBs SPN/DP/SP complete all as specified and directed.

M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 20 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified including all earth work excavation, returning filling and disposal of surplus soil and testing on completion, complete all as specified and directed.

Supply, laying , jointing and testing of cable XLPE insulated, screened, PVC bedded ,galvanized steel strip or wire armoured heavy duty electric cable with multistranded aluminium conductor, 1100 volts grade, laid in trenches or duct or passing through pipe or fixed to poles walls of size 6 Sqmm 2 core confirming to IS : 7098 (Part - 1) laid in trenches,under road or passing through pipes/ducts or fixed to walls/poles complete with proper thimbles complete all as specified and directed.

S&F LED bulkhead fitting with 10 watt LED complete connection with copper wire complete all as specified and directed.

S&F in replacement energy efficient T-8 LED batten integrated type single tube 20 Watt, 4 ft long white complete with LED rod, LED driver and LED batten with extruded aluminium/PC Body and PC diffuser including all accessories pre wire and connecting up with copper three core flexible wire complete all as specified and directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F Metal clad single pole and a neutral enclosure with a two pin and earth plug and socket with one single pole MCB SP 20 Amp,240V complete all as specified and directed.

M&L for Fresh Air Fan made of PVC body 250 mm sweep 1200 RPM, 230V including fixing arrangement complete with louver sutters and making opening in wall of suitable size incl making good to the surface of wall complete all as specifed and directed. Note:- Old Unsv fan to be deposited in E/M store yard.

Refixing for LED bulkhead fitting with 10 watt LED complete connection with copper wire complete all as specified and directed.

Refixing for energy efficient T-8 LED batten integrated type single tube 20 Watt, 4 ft long white complete with LED rod, LED driver and LED batten with extruded aluminium/PC Body and PC diffuser including all accessories pre wire and connecting up with copper three core flexible wire complete all as specified and directed.

Refixing of electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc., complete all as specified and directed.

Excavation in trenches in hard/ dense soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep and not exc 10 Sqm on plan, for laying of cable and getting out, complete all as specified and directed.

M&L for dry and clean fine sand for cable cushioning to underground cable protection, complete all as specified and directed. Note: i) Excavation and earth work measured separately. ii) Punned down thickness shall be measured.

S&F in repair Cover to underground cable with one layer of bricks using sub class ‘B’ bricks (old size) laid flat across the cable complete all as specified and directed. Note:- Excavation and earth work measured separately.

M&L for sub main wiring with two runs of single core 06 Sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 grade FRLS cable drawn and PVC rigid conduit 20 mm dia with all necessary fittings and accessories and one run of PVC insulated and unsheathed single core cable with copper conductor of size 6 Sqmm as earth wire (green in colour ) run through PVC rigid conduit and connected to common earth dolly , including taking out the old sub main wiring complete all as specified and directed. Note. Two run of cable and one run of PVC conduit and one run of earth continuity wire shall be measured as one run.

S&F in replacement energy efficient T-8 LED batten integrated type single tube 20 Watt, 4 ft long white complete with LED rod, LED driver and LED batten with extruded aluminium/PC Body and PC diffuser including all accessories pre wire and connecting up with copper three core flexible wire complete all as specified and directed.

S&F in replacement LED mirror light 10 watt with diffuser, decorative type complete all as specified and directed.

S&F LED light fitting 1 x 20 Watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED street light fitting 35 watt, 230V, AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant incl thermal management in miltiple optics complete with IP 65/66 protection complete all as specified and directed.

M&L for submain wiring with 100 grade two single core FRLS-H wire PVC insulated and unshethed cable with stranded copper conductor 2.5 sqmm drawn into and including electrical grade PVC conduit not less than 25mm dia, with all accessories fixed concealed including chase cutting in brick/ stone masonary for fixing conduit and making good the disturbed surfaces of wall as per existing incl 2.5 sqmm multistranded copper conductor as earth wire in green colour, complete all as specified and directed.

S&F Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S sheet,powder coated, SPN DB with 200 Amps rated bus bar, 4 way, IP-42 protection surface mounting, 240 volts, dust and vermin proof, suitable for incorporation of MCBs duly cocealled in wall/fixed to columns, factory made, including making good distrubbed surfaces with matching colour, complete all as specified and directed.

S&F 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning, complete all as specified and directed.

S&F in repair 1100 volts grade heavy duty 6 Sq mm two core service cable PVC insulated aluminium Stranded conductor, served with inner shething of PVC sheathed in service conections suspended by insulating hangers and procelean beat not more than I metre apart including 4 sqmm suspension wire, one twin core cable flat or circular, complete all as specified and directed.

m/s jupiter builders (BID ID -3155093)