Tender ID

Karnataka

Retender

Works

Buildings

Construction of 4 Rooms in Govt Boys PU College at Vijayapur Town in Vijayapur Dist

Rural Development and Panchayat Raj Department

RDPR Division Office Vijayapura | Karnataka

Amount: ₹99.3 LCloses: 7 Jan 2025Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published31 Dec 2024
Closed7 Jan 2025
Retendered31 Dec 2024

Cancellation Details

Retendered

RetenderedRetenderedReason: Retendered

Published 31 Dec 2024

Tender Value

₹99.3 L

EMD Value

₹1.7 L

Closing Date

7 Jan 2025, 4:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Rural Development and Panchayat Raj Department

Contact Person

B B Palayi JE

Mobile Number

Work Description

Construction of 4 Rooms in Govt Boys PU College at Vijayapur Town in Vijayapur Dist

Tender Information

Tender ID

RDPR/2024-25/BD/WORK_INDENT11065

Reference Number

RDPR/2024-25/BD/WORK_INDENT11065

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

RDPR Division Office Vijayapura

Source Website

Subscribe to view

Documents Required

9 documents required · 9 mandatory

Technical Bid

RequiredValid KPWD CLASS-3 and Above Registration Certification

RequiredTendere Must Submnit PAN & GST Certificate

RequiredTo quality for award of this contant each tenderer in his name should have in the 2019-20 to 2023-24 years period achieved in at least two financial years an average finance turnover of Rs 84.17 lakhs usually not less than amount put to tender from CA on letter Head with UDIN No otherwise bid will be directly disqualified

RequiredWork Order / Commitments of ongoing works issued by an officer not below the rank of Executive Engineer

RequiredTenderer must have of value 2019-20, 2020-21, 2021-22, 2022-23 to 2023-24 satisfactory completed as a prime contractor at least one similar nature of Work of 50PERCENT of the Amount Put to Tender. Not less than Rs 42.09 lakhs issued by the officer not below tha rank of Executive Engineer. Work Done certificate with Work Indent No is Mandatory

RequiredAccurate postal address and Phone / cell Number

RequiredTender who meet the above specified minimum qualifying will only be qualified if there available tender capacity is more than the total tinder value the web available tender capacity will be calculated as under associated available tender capacity A X N X 2.50 - B

RequiredContractor should submit / upload the difference amount as per the CSR 2024 25 in FDR or DD

RequiredUnconditional LIQUID ASSETS AND OR AVAILABILITY OF CREDIT FACILITIES OF NOT LESS THAN 30 PERCENT OF THE AMOUNT OF CONTRACT THE VALUE SHOULD NOT LESS THAN RS 25.25 LAKHS

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

To qualify for award of this contract each tenderer in his name should have in the last five years period (i.e., 2019-20, 2020-21, 2021-22, 2022-23 & 2023-24) Turnover Certificate obtained from Charted Accountant and achieved in at least two financial years an average Annual Financial Turnover (in all classes of civil Engineering construction works only) of Rs. 84.17 lakhs (usually not less than the estimated cost under this contract

In last five years (i.e., 2019-20, 2020-21, 2021-22, 2022-23 & 2023-24) Satisfactorily completed as a prime contractor for at least one similar nature of work done 50% of the cost of the work i.e., not less than the amount Rs 42.09 lakhs, certificate issued from the rank of Executive Engineer and above for the same should be furnished by the contractor. (With Work Indent Number).

Liquid assets and /or availability of credit facilities of not less than Rs 25.25 lakhs (30% of amount put to tender) (Credit lines/ letter of credit/ certificates from Nationalized banks for meeting the fund requirement etc.) for particularly this work only. (Unconditional) in given format

To qualify for award of this contract, each Tenderer in its name should have in the last five years Executed in any one year, the following minimum 80 % quantities of work in last five years. 1. Earth Work Exavation - 696.40 Cum 2. RCC/PCC - 192.97 Cum 3. UCR/BBM - 88.54 Cum 4. Steel - 15.71 MT 5. Plaster - 1447.28 Sqm 6. Flooring - 375.94 Sqm

EMD may be paid fully by E-payment Rs. 1,68,400/-

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Any damage during the progress of work, the damage cost should be beared by the contractor

Any addition / Ommission / alteration will be reserved by the under signed

Tender processing fee will not be refundable or exchangeable in case of cancellation of tender

Contractor should made an agreement within 20 days of tender acceptance date and work should be carried out with in the 1 week time after agreement. If not tender will be cancelled at the contractors own risk and cost

Security deposit at the rate of 5% of tender cost should be made in favour of Executive Engineer in the form of DD / FDR / NSC/ BG (NSC should be fledge in the name of Executive Engineer)

The work should be carried out in accordance with the standard specifications specified by the department. The defect liability period for all these works shall not be less than 1 year & the contrator shall have to give guarantee for 1 year maintanance

The rates quoted by contractor shall include for structural design & drawing duly certified by the competent authority. The Tenderer whose tender is accepted shall furnish withing 15 days the structural design & drawings in 3 sets for scrutining to the competent authority. The contractor shall furnish 3 sets of design & drawings (approved) to the Engineer-in-charge and keep one set at site of work. The safe bearing capacity shall be got tested before submission of the drawings.

If the rates quoted by the Contractor is lesser than the amount put to tender, the difference cost should be paid by the contractor, through DD / FDR / NSC/ BG in the favour of Executive Engineer at the time of Agreement

The Contractor shall quote the rates without adding GST for either materials or works contract Service. GST payable by the Contractor under this works contract will be paid to the contractor seperately over the contractors bid amount as per Govt order No PWD 65 RDF 2017, Dated:11-10-2018

Contractor should obey with the above conditions in addition to the KW-3

Contractor should upload KPWD renewal registration copy.

The contractor should scan the GST Certificate, PAN card & Contact Phone No, Postal Address Details

Period of completion 6 Months including Monsoon

Calculation sheet of Bidder Capacity AxNX2.50-B

In case the contractor participating in the tender submits a lower rate, the difference amount shall be paid in advance as security deposit in any nationalized bank and the relevant document shall be uploaded, in case not uploaded, which such tender proposal shall be rejected.

GST shall be paid to the tendered amount separately.

PWD Registration Certificate Class 3 and Above

Technical Criteria

General

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Capabilities of Vendor

Audited CA Certificate of Annual Turnover

Work Done Certificate

Line of Credit

Work Done Certificate

EMD may be paid fully by E-payment Rs. 1,68,400/-

Others -- EMD may be paid fully by E-payment Rs. 1,68,400/-

List of existing commitments and ongoing works

Others -- List of existing commitments and ongoing works

List of works for which tenders already submitted

Others -- List of works for which tenders already submitted

Banker Details for reference

Others -- Banker Details for reference

The contractor should scan the GST Certificate, PAN card & Contact Phone No, Postal Address Details

Others -- The contractor should scan the GST Certificate, PAN card & Contact Phone No, Postal Address Details

Calculation sheet of Bidder Capacity AxNX2.50-B

Others -- Calculation sheet of Bidder Capacity AxNX2.50-B

Others -- submits a lower rate, the difference amount shall be paid in advance as security deposit in any nationalized bank

PWD Registration Certificate Class 3 and Above

PWD Registration Certificate (Class I/II/III/IV)

Fee & Financial Details

Tender Fee Amount

₹2,490

EMD Fee Amount

₹1.7 L

Important Dates

Last Activity

31 Dec 2024

Published

31 Dec 2024

Bid Opening

9 Jan 2025

Download Ends

6 Jan 2025

Pre-Bid Meeting

6 Jan 2025

BOQ Preview

•

Ground Floor (2 ROOMS)

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 to 6 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, cauti...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ra...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

•

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

•

Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup ...

•

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for ...

•

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

•

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

•

Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 20 mm...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

•

Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2 (Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elast...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

•

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...

•

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...

•

Providing Red Salwood frames of doors, windows, clerestory windows,ventilators and other frames, wrought, framed or assembled includingmaking plaster groves (excluding cost of cement concrete and side...

•

Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...

•

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm.

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Handles 200mm.

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm.

•

Providing and fixing Stainless Steel Fixtures conforming to 304graded steel as per direction of engineer in charge.SS Tower Bolts 250x10mm.

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm.

•

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture i...

•

Painting wood work with Deluxe Multi Surface Paint of required shade.Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an ev...

•

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer....

•

Providing wall black boards in 12mm thick with CM 1:3 and applied with primer & two coats of acrylic emulsion black paint including finishing etc.,complete.

•

Providing & fixing on wall face unplasticised Rigid PVC rain water pipes conferming to IS :13592 type A Including Jointing with seal ring conferming to IS 5382 leaving to 10 mm gap for thermal expansi...

•

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size,with top and bottom rail of T-iron 40x40...

•

Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matt...

•

Additionalities For formwork, Centring and scffodling for Formwark for Sub structures @ 8% With All lead & lifts as directed by the engineer in charge of the work

•

Additionalities For formwork, Centring and scffodling for Formwark for column @ 70% With All lead & lifts as directed by the engineer in charge of the work

•

Additionalities For formwork, Centring and scffodling for Formwark for Drop wall @ 10% With All lead & lifts as directed by the engineer in charge of the work

•

Additionalities For formwork, Centring and scffodling for Formwark for column @ 70% With All lead & lifts as directed by the engineer in charge of the work

•

Additionalities For formwork, Centring and scffodling for Formwark for plinth beams @ 50% With All lead & lifts as directed by the engineer in charge of the work

•

Additionalities For formwork, Centring and scffodling for Formwark for Drop wall @ 50% With All lead & lifts as directed by the engineer in charge of the work

•

Additionalities For formwork, Centring and scffodling for Formwark for column @ 70% With All lead & lifts as directed by the engineer in charge of the work

•

Additionalities For formwork Centring and scffodling for Formwark for Lintels, Roof Beams @ 60% With All lead & lifts as directed by the engineer in charge of the work

•

Additionalities For formwork, Centring and scffodling for Formwark for Roof Slab @ 50% With All lead & lifts as directed by the engineer in charge of the work

•

Additionalities For formwork, Centring and scffodling for Formwark Formwark for chajja @ 45% With All lead & lifts as directed by the engineer in charge of the work

•

Additionalities For formwork, Centring and scffodling for Formwark for Coping @ 60% With All lead & lifts as directed by the engineer in charge of the work

•

First Floor (2 Rooms)

•

Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, cur...

•

Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...

•

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 Kg/10 m²) with paint ...

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm.

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Handles 200mm.

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm.

•

Providing and fixing Stainless Steel Fixtures conforming to 304graded steel as per direction of engineer in charge.SS Tower Bolts 250x10mm.

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm.

•

Providing wall black boards in 12mm thick with CM 1:3 and applied with primer & two coats of acrylic emulsion black paint including finishing etc.,complete.

•

Additionalities For formwork, Centring and scffodling for Formwark Formwork for column @ 70% With All lead & lifts as directed by the engineer in charge of the work

•

Additionalities For formwork, Centring and scffodling for Formwark Formwark for Lintels, Roof Beams @ 60% with All lead & lifts as directed by the engineer in charge of the work

•

Additionalities For formwork, Centring and scffodling for Formwark Formwark for Roof Slab @ 50% With All lead & lifts as directed by the engineer in charge of the work

•

Additionalities For formwork, Centring and scffodling for Formwark Formwark for chajja@ 45% With All lead & lifts as directed by the engineer in charge of the work

•

Additionalities For formwork, Centring and scffodling for Formwark Formwark for Coping @ 60% With All lead & lifts as directed by the engineer in charge of the work

•

Providing and fixing Steel work in built up tubular (round, square orrectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved...

•

Providing and fixing precoated galvanised iron profile sheets (size, shapeand pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 g/m...

•

Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm.

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Handles 200mm.

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm.

•

Providing and fixing Stainless Steel Fixtures conforming to 304graded steel as per direction of engineer in charge.SS Tower Bolts 250x10mm.

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm.

•

Additionalities For formwork, Centring and scffodling for Formwark Formwork for column @ 70% With All lead & lifts as directed by the engineer in charge of the work

•

Additionalities For formwork, Centring and scffodling for Formwark Formwark for Lintels, Roof Beams @ 60% With All lead & lifts as directed by the engineer in charge of the work

•

Additionalities For formwork, Centring and scffodling for Formwark Formwark for chajja@ 45% With All lead & lifts as directed by the engineer in charge of the work

•

Additionalities For formwork, Centring and scffodling for Formwark Formwark for Coping @ 60% With All lead & lifts as directed by the engineer in charge of the work

•

Electrical Work

•

Concealed Conduit System Supplying heavy gauge PVC conduit pipe ……mm dia .......mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running ...

•

Supplying heavy gauge PVC Conduit Pipe ….dia .......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and ...

•

Supplying and fixing PVC/metal conduit Deep junction box (PWD Ele Vol-6 Part III SR 23-24 - Item No. - 1.5 )(Page No. - 3 )

•

Supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood, after due groove cutting, Finishing with necessary cement plastering complete. (PWD Ele Vol-6 P...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (PWD Ele Vol-6 Part III SR 23-24 -Item No. - 3.6.1 )(Page No. - 9 )

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (PWD Ele Vol-6 Part III SR 23-24 - Item No. - 3.6.2 )(Page No. - 9 )

•

Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulat...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS...

•

Supplying and mounting 2 Nos. of 2 way 6 amps flush type switches either surface/flush mounted on existing gang box or in 4mm thick plastic sheet and mounted on a flush mounted wooden box and wiring a...

•

Supplying and fixing PBBC/Bakelite straight or slant batten holder and wiring with 60w/230 volts lamps. (PWD Ele Vol-6 Part III SR 23-24 - Item No. - 3.14.5 )(Page No. - 10 )

•

Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc., and fixing on existing wooden or metal box using N.F. screws. (PWD Ele Vol-6 Part III SR 23-24 - Item No....

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double bal...

•

Extra length of GI pipe of class B 19mm dia for down rod. (PWD Ele Vol-6 Part III SR 23-24 - Item No. - 13.12 )(Page No. -57 )

•

Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wire...

•

Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessar...

•

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

•

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit sh...

•

Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc. GI Wire (Elec SR - 201...

•

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. (PWD Ele Vol-6 Part III SR 23-24 -Item No. - 5.7.3 )(Page No. - 14 )

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

11065 PU Vijayapur KW 3.doc

Tender Document • 0.45 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Tender ID

Karnataka

Retender

Works

Buildings

Construction of 4 Rooms in Govt Boys PU College at Vijayapur Town in Vijayapur Dist

Rural Development and Panchayat Raj Department

RDPR Division Office Vijayapura | Karnataka

Amount: ₹99.3 LCloses: 7 Jan 2025Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published31 Dec 2024
Closed7 Jan 2025
Retendered31 Dec 2024

Cancellation Details

Retendered

RetenderedRetenderedReason: Retendered

Published 31 Dec 2024

Tender Value

₹99.3 L

EMD Value

₹1.7 L

Closing Date

7 Jan 2025, 4:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Rural Development and Panchayat Raj Department

Contact Person

B B Palayi JE

Mobile Number

Work Description

Construction of 4 Rooms in Govt Boys PU College at Vijayapur Town in Vijayapur Dist

Tender Information

Tender ID

RDPR/2024-25/BD/WORK_INDENT11065

Reference Number

RDPR/2024-25/BD/WORK_INDENT11065

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

RDPR Division Office Vijayapura

Source Website

Subscribe to view

Documents Required

9 documents required · 9 mandatory

Technical Bid

RequiredValid KPWD CLASS-3 and Above Registration Certification

RequiredTendere Must Submnit PAN & GST Certificate

RequiredWork Order / Commitments of ongoing works issued by an officer not below the rank of Executive Engineer

RequiredAccurate postal address and Phone / cell Number

RequiredContractor should submit / upload the difference amount as per the CSR 2024 25 in FDR or DD

RequiredUnconditional LIQUID ASSETS AND OR AVAILABILITY OF CREDIT FACILITIES OF NOT LESS THAN 30 PERCENT OF THE AMOUNT OF CONTRACT THE VALUE SHOULD NOT LESS THAN RS 25.25 LAKHS

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

EMD may be paid fully by E-payment Rs. 1,68,400/-

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Any damage during the progress of work, the damage cost should be beared by the contractor

Any addition / Ommission / alteration will be reserved by the under signed

Tender processing fee will not be refundable or exchangeable in case of cancellation of tender

Security deposit at the rate of 5% of tender cost should be made in favour of Executive Engineer in the form of DD / FDR / NSC/ BG (NSC should be fledge in the name of Executive Engineer)

Contractor should obey with the above conditions in addition to the KW-3

Contractor should upload KPWD renewal registration copy.

The contractor should scan the GST Certificate, PAN card & Contact Phone No, Postal Address Details

Period of completion 6 Months including Monsoon

Calculation sheet of Bidder Capacity AxNX2.50-B

GST shall be paid to the tendered amount separately.

PWD Registration Certificate Class 3 and Above

Technical Criteria

General

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Capabilities of Vendor

Audited CA Certificate of Annual Turnover

Work Done Certificate

Line of Credit

Work Done Certificate

EMD may be paid fully by E-payment Rs. 1,68,400/-

Others -- EMD may be paid fully by E-payment Rs. 1,68,400/-

List of existing commitments and ongoing works

Others -- List of existing commitments and ongoing works

List of works for which tenders already submitted

Others -- List of works for which tenders already submitted

Banker Details for reference

Others -- Banker Details for reference

The contractor should scan the GST Certificate, PAN card & Contact Phone No, Postal Address Details

Others -- The contractor should scan the GST Certificate, PAN card & Contact Phone No, Postal Address Details

Calculation sheet of Bidder Capacity AxNX2.50-B

Others -- Calculation sheet of Bidder Capacity AxNX2.50-B

Others -- submits a lower rate, the difference amount shall be paid in advance as security deposit in any nationalized bank

PWD Registration Certificate Class 3 and Above

PWD Registration Certificate (Class I/II/III/IV)

Fee & Financial Details

Tender Fee Amount

₹2,490

EMD Fee Amount

₹1.7 L

Important Dates

Last Activity

31 Dec 2024

Published

31 Dec 2024

Bid Opening

9 Jan 2025

Download Ends

6 Jan 2025

Pre-Bid Meeting

6 Jan 2025

BOQ Preview

•

Ground Floor (2 ROOMS)

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm.

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Handles 200mm.

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm.

•

Providing and fixing Stainless Steel Fixtures conforming to 304graded steel as per direction of engineer in charge.SS Tower Bolts 250x10mm.

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm.

•

Providing wall black boards in 12mm thick with CM 1:3 and applied with primer & two coats of acrylic emulsion black paint including finishing etc.,complete.

•

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size,with top and bottom rail of T-iron 40x40...

•

Additionalities For formwork, Centring and scffodling for Formwark for Sub structures @ 8% With All lead & lifts as directed by the engineer in charge of the work

•

Additionalities For formwork, Centring and scffodling for Formwark for column @ 70% With All lead & lifts as directed by the engineer in charge of the work

•

Additionalities For formwork, Centring and scffodling for Formwark for Drop wall @ 10% With All lead & lifts as directed by the engineer in charge of the work

•

Additionalities For formwork, Centring and scffodling for Formwark for column @ 70% With All lead & lifts as directed by the engineer in charge of the work

•

Additionalities For formwork, Centring and scffodling for Formwark for plinth beams @ 50% With All lead & lifts as directed by the engineer in charge of the work

•

Additionalities For formwork, Centring and scffodling for Formwark for Drop wall @ 50% With All lead & lifts as directed by the engineer in charge of the work

•

Additionalities For formwork, Centring and scffodling for Formwark for column @ 70% With All lead & lifts as directed by the engineer in charge of the work

•

Additionalities For formwork Centring and scffodling for Formwark for Lintels, Roof Beams @ 60% With All lead & lifts as directed by the engineer in charge of the work

•

Additionalities For formwork, Centring and scffodling for Formwark for Roof Slab @ 50% With All lead & lifts as directed by the engineer in charge of the work

•

Additionalities For formwork, Centring and scffodling for Formwark Formwark for chajja @ 45% With All lead & lifts as directed by the engineer in charge of the work

•

Additionalities For formwork, Centring and scffodling for Formwark for Coping @ 60% With All lead & lifts as directed by the engineer in charge of the work

•

First Floor (2 Rooms)

•

Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm.

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Handles 200mm.

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm.

•

Providing and fixing Stainless Steel Fixtures conforming to 304graded steel as per direction of engineer in charge.SS Tower Bolts 250x10mm.

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm.

•

Providing wall black boards in 12mm thick with CM 1:3 and applied with primer & two coats of acrylic emulsion black paint including finishing etc.,complete.

•

Additionalities For formwork, Centring and scffodling for Formwark Formwork for column @ 70% With All lead & lifts as directed by the engineer in charge of the work

•

Additionalities For formwork, Centring and scffodling for Formwark Formwark for Lintels, Roof Beams @ 60% with All lead & lifts as directed by the engineer in charge of the work

•

Additionalities For formwork, Centring and scffodling for Formwark Formwark for Roof Slab @ 50% With All lead & lifts as directed by the engineer in charge of the work

•

Additionalities For formwork, Centring and scffodling for Formwark Formwark for chajja@ 45% With All lead & lifts as directed by the engineer in charge of the work

•

Additionalities For formwork, Centring and scffodling for Formwark Formwark for Coping @ 60% With All lead & lifts as directed by the engineer in charge of the work

•

Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS hinges 100 mm.

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Handles 200mm.

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 300mm.

•

Providing and fixing Stainless Steel Fixtures conforming to 304graded steel as per direction of engineer in charge.SS Tower Bolts 250x10mm.

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm.

•

Additionalities For formwork, Centring and scffodling for Formwark Formwork for column @ 70% With All lead & lifts as directed by the engineer in charge of the work

•

Additionalities For formwork, Centring and scffodling for Formwark Formwark for Lintels, Roof Beams @ 60% With All lead & lifts as directed by the engineer in charge of the work

•

Additionalities For formwork, Centring and scffodling for Formwark Formwark for chajja@ 45% With All lead & lifts as directed by the engineer in charge of the work

•

Additionalities For formwork, Centring and scffodling for Formwark Formwark for Coping @ 60% With All lead & lifts as directed by the engineer in charge of the work

•

Electrical Work

•

Supplying and fixing PVC/metal conduit Deep junction box (PWD Ele Vol-6 Part III SR 23-24 - Item No. - 1.5 )(Page No. - 3 )

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (PWD Ele Vol-6 Part III SR 23-24 -Item No. - 3.6.1 )(Page No. - 9 )

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (PWD Ele Vol-6 Part III SR 23-24 - Item No. - 3.6.2 )(Page No. - 9 )

•

Supplying and fixing PBBC/Bakelite straight or slant batten holder and wiring with 60w/230 volts lamps. (PWD Ele Vol-6 Part III SR 23-24 - Item No. - 3.14.5 )(Page No. - 10 )

•

Extra length of GI pipe of class B 19mm dia for down rod. (PWD Ele Vol-6 Part III SR 23-24 - Item No. - 13.12 )(Page No. -57 )

•

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. (PWD Ele Vol-6 Part III SR 23-24 -Item No. - 5.7.3 )(Page No. - 14 )

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

11065 PU Vijayapur KW 3.doc

Tender Document • 0.45 MB

Ready to Participate?

Download all tender documents and submit your bid