SPECIAL REPAIR TO MD ACCN BLDG NO 188 189 AND 190 AND CERTAIN OTHER CIVIL WORKS (MINOR WORKS) AT BAMBOLIM CAMP UNDE GE PANAJI GOA

Amount

Demolition of existing water proofing treatment any type from top surface of roof slab and removing the material obtained to low lying area complete all as specified and as directed

Material & Labour for water proofing treatment using 4mm thick APP modified membrane consisting five layer membrane with features as spcified, weighing not less than 4kg per Sqm laid over a coat of cold applied bituminous primer @ 0.4 litres per sqm on surface to provide a layer of APP membrane by torching applications including sealing the over lap while torching with 150mm on ;length side and 100mm wide side as per manufacturer's instructions incl joints and change in direction be curved with cement mortar 1:3 mixed with SBR latex @ 200 ml/ bag of cement cured well before laying of membrane and provide a finishing coat with solar reflective bituminous aluminium paint @ 0.1 kg per Sqm as all as specified and directed.

Taking down cement plaster of any description from brick or concrete surface including raking out joints, hacking for key, scrubbing out with water, etc. complete all as specified and as directed.

Material & Labour rendering 15 mm thick on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing in CM 1:4 without using extra cement mixed with water proofing compound and finished even and smooth without using extra cement complete all as specified and as directed. Note :- Water proofing compound will be measered seperatly.

Supply only integral water proofing compound (ISI Mark) complete all as specified and as directed.

Material & Labour rendering 15 mm thick on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing in CM 1:6 without using extra cement and finished the furface even and smooth smooth without using extra cement complete all as specified and as directed.

Material & Labour plastering 10 mm thick on brick or concrete surface in CM (1:3) on ceiling to be finished even & smooth without using extra cement complete all as specified and as directed.

Material & Labour for two coat of oil bound distemper on plastered surfaces of walls including prepartion of new surfaces and chalk whiting , on plastered surfaces, preparatory to distempering complete all as specified and directed

Material and labour for applying one coat of oil emulsion distemper on old decorated surface of wall including preparation of surface by washing, rubbing down, and stopping of distempered and painted surface etc complete all as specified and directed.

Material & Labour for preparation old surface and applying one coats of white wash on ceiling complete all as specified and as directed.

Material and labour for applying three coats of (lime) white wash including preparation of new plastered surfaces of ceiling complete all as specified and as directed.

Material & Labour for complete removing of existing treatment and preparation of old plastered surface and applying two coats of white wash on wall complete all as specfified and as directed.

Material & Labour for complete removal of existing treatment ,preparation of old plastere surfaces of walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489-2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over new surface complete all as specified and directed.

Material & Labour for preparation of new plastere surfaces of walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489-2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over new surface complete all as specified and directed.

Material & Labour for GI wire netting 0.90 mm dia and 12mm mesh lathing to wood or metal studding, joists, etc in walls, ceilings, Stanchions, beams etc inculding all laps, cutting and waste complete all as specified and directed

Demolition of cement concrete (un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Material & Labour for cement concrete type E2 1:5:10 (40 mm graded aggregate) in sunken floor all as specifed and directed

Material & Labour 75mm thick plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate, finishing the surface even and fair as in plinth protection and similar work complete all as specified and directed.

Material & Labour PCC (1:2;4) type B1 using 20 mm graded aggregate as in padding over flat roof 40mm average thick finished fair and even without using extra cement complete all as specified and as directed.

Material & Labour for hardcore of gauge n. exe 63 mm deposited, spread, levelled in layers exe 15 cm thick, watered rammed to a true surface using broken bricks complete all as specified and as directed.

Material & Labour Cement concrete type C- 2, 1:3:6 (40mm graded aggregate) 75mm thick as in sub base complete all as specified and as directed..

Material & Labour cement concrete type B1 1:2:4 using 20mm graded stone aggregate25mm thick as in flooring etc complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing ) and disposing off the rubbish material complete all as specified and directed.

Material & Labour coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

Material & Labour glazed ceramic coloured designer pattern tiles 450mmx 300mmx7mm thick on vertical surface such as skirt, Dado etc set and jointed in white colour cement including 10mm thick backing coat on fair faces of brick work or concrete surfaces in CM 1:4 complete all as specified and directed

Material & Labour for 20mm thick Granite stone machine cut, table rubbed mirror pre-polished stone in cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite stone including cutting, chamferefiring to all exposed edges and polishing complete all as specified and directed

Taking down chowkat/frame with shutters n exc 1.5 Sqm each (without taking off shutters from the frame) complete all as specified and directed.

All as in item No. 28 above but exc 1.5 Sqm and n exc 4 Sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down shutters of any description exc. 1.00 Sqm and not exc. 2.00 Sqm each complete all as specified and directed.

Supply & Fix 2nd Class H.W. plain solid straight chowkats & frames wrought, framed, rebated on the solid rounded or chamfered put together with glue, pinned at joints complete all as specified and directed.

Supply & Fix glazed, guaged skeleton shutter 35mm thick 2nd class H/W factory made divided in to squares with plain, chamfered of rounded, mitred and reveated sash bars any number prepared to receive glass/gaused etc.edges of framming plain,chamfered or rounded fitted with cut and mitred beads for securing glass/guaged etc complete all as specified and directed.

Supply & Fix 35 mm thick 2nd class H/W Factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply & Fix for Power coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

Supply & Fix Powder coated anodised aluminium door window and ventilator shutters fixed, openable or sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

Supply & Fix Anodised aluminium grills (anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size to fixing and operation of handles and fixing approved anodised aluminium standard section around the opening as per requirement complete all as specified and as directed.

Supply & Fix 4 mm thick plain sheet glass ordinary quality and glazing fix with bead in squares n. exc. 0.5 SM in each pane complete all as specified and as directed.

Supply & Fix 4 mm thick figured glass/ pin head type and glazing with oil putty or fixed with beads in square not exceeding 0.5 sqm in each pane complete all as specified and directed.

Supply & Fix Aluminium alloy wire cloth fixed 0.45 mm nominal dia.of wire and average width of aperture 1.40 mm and and fixed with aluminium wire staples/wooden beads in doors and windows complete all as specified and directed.

Supply and fix solid PVC door frames of size 50mm x 47 mm made out of 5 mm thick plain/printed coloured PVC sheet reinforced with MS square tube all as per specification & drg in SSR Part - II complete all as specified and as directed.

Supply and fix factory made solid panel PVC door shutter 30mm thick (styles) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitten in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading & jointed together with solvent cement, complete all as specified and shown in drawing in SSR II complete all as specified and as directed.

Material & Labour Preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint over one coat of pink primer complete all as specified and as directed.

Supply & Fix Butt hinges, medium weight cold rolled mild steel and fixed 100mm long fixed in repair complete all as specified and as directed.

Supply & Fix aluminium anodised, barrel tower bolts of extruded section and fixed 200mm long fixed in repair complete all as specified and as directed.

Supply & Fix aluminium handles cast type anodised 150mm long fixed in repair complete all as specified and as directed.

Supply & Fix Aluminium alloy powder coated sliding door bolt 300 mm long with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

Supply and fix curtain rails 25mm dia anodised aluminium alloy with brackets stops rollers etc fixed in repairs complete all as specified and directed. Note - Bracket will be paid under item No 48 here in after.

Supply & Fix powder coated curtain brackets decorative/fancy type for securing curtain rod complete all as specified and as directed..

Taking up or down steel water tubing 15mm bore and connections, including fitting complete all as specified and directed.

All as in item No 49 above, but 20mm bore pipe.

All as in item No 49 above, but 25mm bore pipe.

Supplying & laying CPVC water tubing outer dia 20mm, SDR-11 grade and plain CPVC SDR -11 fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

All as in item No. 52 above, but 25mm bore pipe.

Supply and fixing CPVC 20mm Brass Elbow (3/4 x 1/2) complete all as specified and directed.

Supply and fixing CPVC 20mm Brass Tee complete all as specified and directed.

Supply and fixing CPVC 20mm Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and directed.

Supply and fixing CPVC 20mm Female Brass Threaded Adaptor (FTA/ FBTA) complete all as specified and directed.

Supply and fixing CPVC 25mm Tank Adaptor complete all as specified and directed.

Supply and fixing CPVC 25mm Ball valve complete all as specified and directed.

Taking up cast iron water mains 80 mm bore (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed.

Taking up cast iron water mains 100 mm bore (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed.

Supply & Fix 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Supply & Fix 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Supply and fix 75 mm PVC(SWR) Bend complete all as specified and directed.

Supply and fix 110mm PVC (SWR) Bend complete all as specified and directed.

Supply & Fix 75 mm PVC (SWR) branch piece, single (single Y) equal or unequal provided with access door complete all as specified and directed.

Supply & Fix 75 mm PVC (SWR) branch piece, double (double Y) equal or unequal provided with access door complete all as specified and directed.

Supply & Fix 110 mm PVC (SWR) branch piece, single (single Y) equal or unequal provided with access door complete all as specified and directed.

Supply & Fix 110 mm PVC (SWR) branch piece, double (double Y) equal or unequal provided with access door complete all as specified and directed.

Supply and fix PVC (SWR) vent cowl 75mm dia complete all as specified and directed.

Supply and fix PVC (SWR) vent cowl 110mm dia complete all as specified and directed.

Supply & Fix 75 mm PVC (SWR) bends any radius provided with access door complete all as specified and directed.

Supply & Fix 110 mm PVC (SWR) bends any radius provided with access door complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails.

Supply & Fix 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

Extra over rates of block board or veneered particle board for 12 mm external teak wood lipping, 6mm thick fixed with nails complete all as specified and directed.

Supply & Fix hasp and staple of size 100mm, mild steel, wire type stove enamelled black, including bolt to hing plate and fixed with screws complete all as specifeid and directed

Disconnecting existing tanks of capacity exc 250ltr and n.exc 500 Ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and refixing in position and cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes etc complete all as specified and directed

Supply & Fix wash hand basin in repair, white flat back size 550 x 400mm with and including 32mm brass chromium plated waste fittings, brackets, pillar cock 15mm, PVC connection 15mm size with PTMT nuts of length 450mm including cutting for and pinning in ends of brackets for erecting stand etc.including PVC waste pipe etc complete all as specified and directed

Supply and fix in repair vitreous china squatting pan 'Orissa' pattern, of size 580mmx440mm white with integral foot rest with and including 'P' or 'S' trap, connection to trap and to flushing pipe front or back inlet including trap set in and including provision of lime concrete bedding and taking out old WC and connections etc complete all as specified and as directed

Supply & Fix PVC valveless, syphonic action type flush tank in repair, white, 10 litre capacity with inlet ball valve, float & handle incl brackets complete high level, flush pipes of PVC 32 mm dia, rubber cones, PVC connection 15 mm size with PTMT nut of length 600 mm etc complete all as specified and as directed.

Supply & Fix sinks made of stainless steel 1 mm thick kitchen with plugs, washers and wastes and waste coupling incl bedding in CM on dwarf wall or incl fixing cantilever brackets and connecting union to pipe, overall size 495x420mm bowl size 410x330x160mm including waste fitting brass CP 40 mm with long shanks and fly nuts and waste pipe 32 mm dia with and including 15 mm dia fancy type chromium plated bib taps complete all as specified and as directed.

Supply and Fix in repairs chromium plated bib taps cast copper alloy, fancy type CP with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferule and fixed of size 15mm bore complete all as specified and directed.

Supply & Fix stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipes or for union & fixed , of bore of pipe 15 mm complete all as specified and directed.

Supply & Fix PVC (SWR) Gully trap 125/110 mm setting & jointing with solvent cement complete all as specified and directed.

Supply & Fix PVC (SWR) floor trap 75 mm dia, plain with grating including jointing with solvent cement complete all as specified and directed.

Material & Labour Reinforced cement concrete (nominal mix) Type B0 1:2:4 (12.5mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Supply & Fix TMT bars, 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. .

Material & Labour Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished, flat surfaces of concrete complete all as specified and directed.

Supply & Fix Towel rail 60 cm long brass chromium plated 20mm dia with brackets fixed to walls complete all as specified and directed.

Supply & Fix 300mm long,mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Material & Labour for cutting holes in brick walls in built in cement mortar or cement lime mortar and stone walls built in lime mortar exc. Half brick but not exc one brick for inserting holdfasts and making good in dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed

Supply & Fix for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts if required, hooks (stay) heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks lawns, drive ways or light traffick parking etc, of rquired strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ labying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

Supply & Fix 4mm thick of size 600mm x 600mm HPSC (High pressure steam cured) prelamainated self embosed, textured disigner board E classic board as in ceiling tile fixed with 4mm dia GI suspenders @ 600mmx600mm c/c bothways including necessary galvanised iron powder coated frame work of size 28x24x0.9mm thick angle complete all as specified and as difected. Make : Armstrong, Anchor, Everest.

Material & Labour for pre-laminated particle board 12mm thick, exterior grade, prelaminated both side with decorative choice laminations, fixed with screws to timber frame work complete all as specified and as directed.

Supply and Fix for aluminium (extruded section body of door closer hydraulically regulated, disignation No 02, universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 Kg complete all as specified and as directed. Make : Everite, Universal, Prabha Door King.

Supply and fix false ceiling work of anodised aluminium snap grid (605mm X 605mm) frame work with Hangers 6mm dia. GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expension hold fasteners 12.5mm dia. 40mm long and including necessary boldt, nuts and washers for flase ceiling with and including 6mm thick non asbestos fibre cement bulding designer boards fixed or laid/ inserted to Aluminium framework with screws complete all as specified and directed.

Taking down carefully copper/ aluminium point wiring of light, fan socket 5/15A or power point complete including fittings such as switches, ceiling rose, pendant, regulator, socket, lamp holders, brackets, lamp fittings, tube light fittings etc including switch boards and making good distrubed surfaces of wall/ ceiling etc so as to match with the existing wall/ ceiling/ floors etc complete all as specified and as directed.

Taking down MCB DBs with MCBs of any size and capacty alongwith teakwood boards, energy meter incl all fittings/furniture carefully and making good disturbed surfaces of wall complete all as specified and directed. Note : Energy meter is the property of the department and will be kept in safe custody for re-fixing.

Taking down carefully sub main wiring including copper/aluminium/GI earth continuity conductor and making good disturbed surfaces all as directed of any sizes complete all as specified and as directed.

Material and Labour for concealed point wiring for one light/ Fan/ Bell point controlled by one switch. with proper colour coding complete with and including PVC insulated, unsheathed,flexible, bright annealed multi stranded copper conductor single core FRLS cables 1.5sqmm 1100 volts (Make: Anchor/ Havells/ Plaza/Finolex/ Polycab) grade drawn through existing conduit including all conduit accessoriesc /fiitting/junction box/inspection covers etc of heavy grade, ISI marked and with and including sunk terminal boxes of factory made 16 gauge pressed steel housing, totally concealed in walls with 3mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk/cupwashers, for mounting of switches , sockets, fan regulator etc ;including 1.5sqmm 1100 volts grade PVC insulated FRLS, unsheathed flexible, multi stranded copper conductor cable as continious earth wire connected to metallic bodies of luminiaries/fan etc at one end to common earth dolly at other end, all as specified and directed.

All as per ser item No 103 above but for one 5A socket point controlled by one switch on same board

All as per ser item No 103 above but for one 5Amp independent socket point controlled by one switch.

All as per item No 103 above but one light point controlled by two way switches

All as per item No 103 here-in-before but for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead.

Material & Labour for switch Piano flush type single pole one way 5 Amps, 240 volts, white finish complete all as specified (Make : Anchor (Delux)/ Leader/ Bajaj)

Supply & Fix switch socket combination 2 in 1, 3 pin, 5/15 A, single pole one way flush type universal, 240 V white finish complete all as specified. (Make : Anchor (Delux)/ Leader/ Bajaj).

Supply and fix switch piano flush type single pole two way 5 amp 240 volt white finish complete all as specified. (Make : Anchor (Delux)/ Leader/ Bajaj).

Material & Labour for socket outlet 5 pin, 5 Amps flush type white finish complete all as specified. (Make : Anchor (Delux)/ Leader/ Bajaj).

Supply & Fix ceiling rose, surface backlite, 65 x 20 mm three terminal complete all as specifed and directed. Make: Anchor (Delux)/ Leader/ Bajaj

Supply & Fix lamp holder insulated body with back plate suitable for angle / batten fitting complete all as specifed and directed. Make: Anchor/ Leader/ Bajaj

Supply and Fix Bell switch including bell Ding Dong One way ,240 Volts AC ISI Marked complete all as specifed and directed. Make: Anchor/ Havells/ Bajaj

Supply & Fix electronic socket size, rotary, 5 speed step type regulator, 220-230 volt white finish complete all as specified Make: Crompton greaves/ Bajaj/ Anchor

Supply and Fix LED Batten Tube Light light fittings 18 Watt and fixed with wall surface with anodized extruded aluminium housing, high transmissitivity diffuser and high lumin output and connecting with 3 core flexible copper cable PVC insulated complete all as specified and directed. Make :-Bajaj Cat part No BCLSB 20 WH or equivalent in CG,Havells

Supply and Fix LED Batten Tube Light light fittings 10 Watt and fixed with wall surface with anodized extruded aluminium housing, high transmissitivity diffuser and high lumin output and connecting with 3 core flexible copper cable PVC insulated complete all as specified and directed. Make:-Bajaj Cat part No BCLSB 10 WH or equivalent in CG,Havells

Supply and fix 20W LED street light fitting, new generation, energy saving and environmental friendly, long life LED street light made up of pressure die-cast housing with prisma as tic polycarbonate modular secondary lense optic for city road lighting source and lens embedded PC cover having top opening separate driver compartment with IP66 protection and impact resistance of IK08. 4KV inbuild surge protection of capacity LED including all accessories complete all as specified and as directed. Make:- Havells cat NO VILUMINASL20WLED757SASYBOPC or equivalent in Bajaj/ Phillips/ Wipro.

Supply and Fix IP-42 protection distribution board, SPN 8 Way, 240 Volts, sheet steel, powder coated, double door system, fitted with two covers suitable for use on 240 V, 50 HZ, with 200 Amps rated bus bar, neutral link each bar and din rail complete all as specified and directed. Make:- Havells/ Schneider/ L&T

Supply and Fix IP-42 protection distribution board, SPN 4 Way, 240 Volts, sheet steel, powder coated, double door system, fitted with two covers suitable for use on 240 V, 50 HZ, with 200 Amps rated bus bar, neutral link each bar and din rail complete all as specified and directed. Make:- Havells/ Schneider/ L&T

Supply and Fixing load line DB Double door including MCCB 63 Amps including dismantelling of existing panel of wall and fixing new load line box and doing the existing connection in new load line with SP ,SPN ,TPN (SP ,SPN ,TPN measured and paid Separetely) plaster with necessary bricks and Cement required at Site and matching the existing surface with Colour including in unit rate complete all as specidired and as directed. Make:- Havells/C&S/Schnieder

Supply and Fixing Isolator SPN 6 to 40 Amps, 240 Volts complete all as specidired and as directed. Make:- Havells/C&S/Schnieder.

Supply and Fixing MCB SP 6 to 32 Amps 240 volts, 10 KA capacity having C-series connected with suitable lugs and suitable for lightening load of capacity 6 to 32 Amps complete all as specified and as directed. Make:- Havells/Schnieder/ L&T.

Supply and Fixing Isolator TPN 415 Volt 63 Amps complete all as specified and as directed. Make:- Havells/C&S/Schnieder.

Supply and Fix Ceiling fan BEE labelling 5 Star Rated Voltage Single Phase, 220Volts AC .Frequency 50HZ Maximumnd Power Input 50 Watt Sweep 1400 mm standard Fittings & Accessories.Capacitor, double ball bearing, Down Rod, Canopy & other standard accessories for fitting of the fan complete all as specified and as directed. Note :- Certificate received from BEE mention input power, star rating, air delivery and 2 year guarantee certificate will be submitted by the contractor. Make:- Bajaj/ Havells/ USha

Material & Labour submain wiring with two runs of single core PVC insulated FRLS, unshethed, 1100 Volts grade, multistranded copper conductor cable of size 6 sqmm (Make: Havells/ Plaza/ Finolex/ Polycab )drawn through and including heavy grade PVC casing caping (Make: Prestoplast/ Pressfit/ Finolex/ Precision) of suitable size, fixed to walls/floors/ceiling and surfaces on truss by means of saddles and clips etc including all acessories/ fittings/junction box/ inspection covers etc of heavy grade, ISI marked with one run of 6 Sqmm PVC insulated FRLS, unshethed multistranded copper conductor cable as a continuous earth wire complete all as specified. Note: (a) Two runs of 6 Sqmm single core copper cables and One run of earth conductor cable of 6Sqmm with and including casing capping/conduit will be measured and paid as one unit length.

Material & Labour for earthing in repair complete with galvanized steel earth plate electrode of size 60cm x 60cm x 6mm thick burried directly in ground vertically at a depth not less than 2.25 metre deep below normal ground level with top edge of the plate not less than 1.5 metre below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt, filling in alternate layer and electrode connections by using galvanized iron earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers made of galvanized iron or steel and protected by light grade 15 mm dia GI pipe connected to main switch board or main control board, and GI pipe light grade 20 mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC 1: 2: 4 type C2 including excavation and earth work, disposal of surplus soil to a distance not exc. 50 mtr all as specified and as shown on Plate No 5 of SSR Part I all as specified and directed by Engr-in-Charge. Note:- On testing if desired earth resistance is not obtainted, the earthing will be redone as no extra cost.

M&L for making opening/hole in wall suitable for fixing exhaust fan 300mm sweep including wooden bedding for fixing of exhaust fan incl necessary necessary fixing arrangment like hook, bolts & nuts complete reqd at site and plastering finishing and making good the existing surface compleate all as specified

Supply and Fixing exhaust fan, double ball bearing, ISI marked, metal body 300 mm sweep, single phase, 230 Volt AC, with louvers, including three core flexible cable of required length of size 23/0.0076 from ceiling rose/ connector to fan terminal including nut, bolt fixed on wall and all other accessories required at site and necessary cutting on wall and making good as per the requirement all as specified and directed. Make : Bajaj / Havells /Usha

M&L Point wiring for one light/ Fan/ Bell point complete with PVC insulated , FRLS, unsheathed, flexible, bright anneled cable 1100 V grade conforming to IS-694 1.5 Sq mm (nominal area) mult-stranded cable with copper conductor (Make: Anchor, Havells, Plaza/ Finolex/ Polycad) including circuit wire drawn through and including heavy grade non metallic rigid PVC casing caping (Make:- Prestoplast/ Pressfit/ Findex/ Precision) of suitable size (ISI marked) and accessories fixed to walls/ floors/ ceilings / roofs etc. with sunken type pressed steel/ welded MS terminal boxes factory made out of 16 gauge, MS sheet with hold fasts flushed to wall/ ceiling/ floor etc, fixed with 3 mm thick laminated sheet top cover for mounting of fittings switches, socket outlets, regulators etc. fixed flush with wall including provision of PVC insulated FRLS, unsheathed 1100 Volts grade, 1.50 Sqmm multistranded copper earth continuity conductor and connecting to common earth dolly including making good the disturbed surfaces to match with the existing surfaces by finishing and painting complete all as specified and as directed.

All as per ser item No 130 above but one switch socket outlet 2/3 pin 5 Amps, on independent board.

All as per ser item No 130 above but for one switch socket outlet 3 pin 5 Amps, on same board

All as per item No 130 above but with 2.50 sqmm PVC insulated FRLS, multistranded copper conductor cable 1100 V grade and 2.5 Sqmm PVC insulated FRLS multistranded copper conductor cable 1100 V grade for one 3 pin, 5/15 Amps switch socket outlet on independent board complete all as specified and directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN 32 Amps and current carrying capacity in the MCB DB complete with connection testing and commissioning. Make: Havells/ C&S/ Schnieder

Supply and fix LED light fitting 1x9W /1X10 W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. Make:- Havells/ Bajaj/ Philips

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth, for foundation, etc or for laying of pipes cables wells cesspits, manholes, pier holes, etc. not exceeding 10sqm on plan and not exceeding 1.5m depth and getting out in hard/dense soil complete all as specified and directed

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick in hard/danse soil complete all as specified and as directed.

Removing excavated surplus spoil not exceding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed

Material & Labour for sand cushioning of LT UG cable in trenches with approved river sand complete all as specified and directed Note :- sand to be filled 23cm and carefully punned to 18 cm thickness. Punned thickness will be measured for the purpose of payment.

Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm laid dry in trenches over underground cable complete all as specified and as directed.

Supply, laying, connect and testing of cable XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 2 core including taking down old unserviceable service wire/cable of any size all as specified and directed.

Tara Construction

SLB Enterprises

OM INFRA