MACHINERY EQUIPMENT

Serve motor drive kit Interface L293D Motor Driver IC with Arduino to control direction of rotation of two DC Motors)

BLDC motor kit BLDC Motor 1 No Bldc motor drive -1no Inbuilt volt and ammeter and rpm meter Inbuilt power supply Input 230v ac

LVDT Trainer Kit • Complete educational trainer for Linear Variable Differential Transformer (LVDT) displacement measurement. • Built-in AC excitation source and signal conditioning circuitry for LVDT operation. • Micrometer assembly for precise linear movement of the LVDT core. • Displacement range ~10 mm with clear front-panel adjustments for zero & calibration. • Digital display (typically 3½-digit) for direct readout of conditioned output/displacement values. • Test points and banana sockets for signal observation on external instruments. • Self-contained unit in a durable enclosure with labeled controls and educational layout. • Includes user manual and patch cords for experiments. • Operates on 230 V AC, 50 Hz mains supply.

Multi-cylinder Petrol Phase : Single Phase Load: Mechanical load with rope Number Of Cylinders : 4 Displacement : Rope brake Power : 65HP,4000 RPM,1396 CC Brand Material : Mild Steel Engine Type : 4 STROKE SELF START Frequency : 15HZ Fuel Consumption : Petrol Fuel Tank Capacity : 5 LETER Morh’s Test Rig

Tail stock assembly Heavy-duty lathe tailstock assembly for training; cast iron body with base, barrel (quill) ~50–75 mm stroke, hand wheel feed, dead centre MT2/MT3, set over screws for taper turning, spindle clamp, complete with all internal parts for dismantling and reassembly; suitable for 300–400 mm centre height training lathe.

DC motor Voltage 220-440 V DC Power - 180 W Speed - 200 rpm

Hydraulic Cylinder Double acting hydraulic cylinder, bore 40–50 mm, stroke 200–300 mm, working pressure up to 100–160 bar, steel tube with honed bore, hard chromed piston rod, front & rear end caps, piston with seals and wear rings. Supplied as standalone unit with suitable mounting for dismantling, inspection and reassembly.

Hydraulic opreated Directional control valve (DCV) Manually operated 3/2 or 4/2 way spool type hydraulic directional control valve, nominal size NG06 (CETOP 3) or equivalent, rated pressure 210 bar, flow 20–40 lpm; valve body with hardened and ground spool, centering springs, ports P–A–B–T clearly marked. Supplied on small mounting plate for dismantling, inspection and assembly practice.

Bearing with shaft assembly Teaching unit with shaft 25–35 mm dia mounted in housing with deep groove ball bearings (6205 / 6206 class) at both ends; includes locking arrangements (circlips, lock nuts, covers). Designed for repeated removal, cleaning, lubrication and refitting of bearings, with provision to mount on bench or test rig.