Repair Replacement of Steel Furniture and wooden furniture and recanning of various types of chairs including painting at AF Stn Singarsi under AGE I AF Stn Singarsi

Amount

Almirah steel large:- Taking out of broken door shutter from Almirah Large Steel and re-fixing the same existing door shutters in original position with pin type new steel hinges of existing size duly welded as required including denting . All as directed by Engineer-in-Charge and shown on drawing No FD-1031)

Removing the worn out u/s handle from the almirah and providing/fixing of new handle chromium plated heavy duty as approved by Engr-in-Charge. (Drawing No FD-1031)

Removing the worn out u/s lock from almirah and providing/fixing with new lock 6 lever with deuplicate key ISI marked with round shape of MS key plate as approved by Engr-in-Charge duly fixed as per drawing.(Drawing No FD-1031)

Removing the worn out u/s 3 way locking device and providing/fixing the new one in its original postion as per drg.(Drawing No FD-1031)

Removing the worn out u/s leg and providing / fixing the new leg made out of MS sheet 1.00mm thick in its original position duly welded as per drg.(Drawing No FD-1031)

Taking out of u/s worn out shelf and providing the new one of existing size and shape made out of MS sheet 1.00mm thick. All as shown on drg.(Drawing No FD-1031)

Removing the worn out paint from internal/external surface of almirah steel large by scraping. Necessary preparation of surface for painting duly dented/pitted and smoothen the surface by putty and painting the internal and external surface with two coat of synthetic enemalled paint over a coat of primer Metal to bring the surface to a glossy shine as directed by Engr-in-Charge.(Drawing No FD-1031)

Almirah Steel Medium :- All as per item No1 here-in-before but for Almirah Steel Medium.

All as per item No 2 here-in-before but for Almirah Steel Medium.

All as per item No 3 here-in-before but for Almirah Steel Medium.

All as per item No 4 here-in-before but for Almirah Steel Medium.

All as per item No 5 here-in-before but for Almirah Steel Medium.

All as per item No 6 here-in-before but for Almirah Steel Medium.

All as per item No 7 here-in-before but for Almirah Steel Medium.

Bed Hard Ply Top:- Remove the unserviceable plywood from both side of head board frame of bed. Supply and fixing with new plywood 4mm thick one side teak face on the both side existing head board (Size of ply : 780mm x 340mm) (Make : Archid/Green ply) and 12mm dia half cut teak wood beading shall be provided with joins of plywood. (Drawing No FD-246).

All as per item No 15 here-in-before but for foot board. Size of Ply shall be 780mm x180mm. (Drawing No FD-246).

Remove of unserviceable legs from head board of bed and Supply and fixing with new legs in its original position made out of teak wood. Size of leg shall be 60mmx 60mm x 860mm and all as per drg and directed by Engineer-in-charge. (Drawing No FD-246).

Remove of unserviceable legs from foot board of bed and Supply and fixing with new legs in its original position made out of teak wood. Size of leg shall be 60mmx 60mm x 500mm and all as per drg and directed by Engineer-in-charge. (Drawing No FD-246).

Remove the existing unserviceable long rail and supply and fix new long rail (size : 35mm x 90mm x 1980mm) made out of Teak wood well seasoned and all as shown on drg and directed by Engineer-in-charge. (Drawing No FD-246).

Remove the existing unserviceable ply wood from bed and supply and fixing with new plywood 12mm thick BWR IS-303 (Drawing No FD-246).

Preparation of surface by Remove of existing polishing mark scratches from all exposed wooden surface to make clean and smooth with required grade of sand paper and finish with polish to bring the surface to require glossy finish and as directed by Engr-in-Charge. (Drawing No FD-246).

Chair Varandah:- Remove of old caning from the steel frame of chair varandah and making the frame by means of welding wherever required to bring its in original shape as per drg.(Drawing No FD-19(M).

De-rusting/cleaning the iron frame to smooth surface and painting all steel surface with two coat of synthetic enameled white paint over a coat of red oxide primer to bring the surface with glossy finish and re-canning the same with 4mm white plastic cane Make-Ajoy/Primer oval shape as approved by as per drg and providing the new rubber shoe complete.(Drawing No FD-19(M).

Chair Writing. Remove of existing unserviceable under mentioned members and providing the new one made out of 1st class HW well seasoned (Teak) and fixing the same in its original position as per drg.Front Legs (Drawing No FD-280)

Rear Legs (Drawing No FD-280)

Front rail of seat frame (Hole should be 12.5mm apart of each other) (Drawing No FD-280)

Side Rail(Ditto complete) (Drawing No FD-280)

Long Stiffener (Drawing No FD-280)

Back rest batten (Drawing No FD-280)

Arm rest (Drawing No FD-280)

Remove the existing canning and supply and weave with 2mm thick new white plastic cane oval shape godrej pattern and beading with 4mm thick new white plastic cane as apporeved.(Drawing No FD-280)

All as per item No 26 here-in-before but for chair writing. (Drawing No FD-280)

Charpoy IP Folding:-Remove the existing unserviceable Ply wood from Charpoy IP Folding and making the frame to its original position by tightening etc and Supply & fixing with new ply wood 12mm thick, commercial, BWR Grade (IS-303) of existing shape & size and as directed by Engr-in-Charge. (Drawing No FD-388)

Removing unserviceable check nuts and supply & fix new nuts in charpoy IP Folding (Drawing No FD-388)

Removing unsv Pipe and S & F new pipe for legs/short/long rail of Charpoy IP Folding (Drawing No FD-388)

Chair Dinning Remove the existing canning and supply and weave with 2mm thick new white plastic cane oval shape godrej pattern and beading with 4mm thick new white plastic cane as apporeved and providing new hard rubber/PVC shoes at the bottom of the chair. Remove of existing unserviceable under mentioned members and providing the new one made out of 1st class HW well seasoned (Teak) and fixing the same in its original position as per drg.(Drawing No FD-279)

Front Legs (Drawing No FD-279)

Rear Legs (Drawing No FD-279)

Front rail of seat frame (Hole should be 12.5mm apart of each other) (Drawing No FD-279)

Side Rail(Ditto complete) (Drawing No FD-279)

Back Rail(Ditto complete) (Drawing No FD-279)

Short stiffener (Drawing No FD-279)

Back rest batten (Drawing No FD-279)

All as per item No 21 here-in-before but for chair dining (Drawing No FD-279)

Repair to Peg Table:- Remove the old unserviceable leg and providing the new leg made out of 1st class teak Wood seasoned of size 30x50x362mm high and fixing the same in its original position as per drg. (Drawing No FD-277)

Remove old broken top rail and providing the new top rail made out of 1st class hardwood teak of size 20mm x 40mm x380mm and fixing the same in its original position as per drg. (Drawing No FD-277)

Remove the old top and providing the new top made out of 18mm particle board one side laminated exterior grade with 4mm teak wood beading all around and fixing the same on peg table in its original position as per drawing and providing new hard rubber/PVC/Nylon shoes to the bottom of legs. Size of particle board shall be 450mm x 300 mm. (Drawing No FD-277)

All as per item No 21 here-in-before but for peg table.(Drawing No FD-277)

Repair of side board :- Remove existing unserviceable legs of side board and Supply and fixing new legs made out of 1st class teak wood well seasoned all as shown on drg. (Drawing No FD-241(M)

Remove the unserviceable knobs of side board drawer and supply & fix new knobs as per existing size and all as shown on drg.(Drawing No FD-241(M)

Remove the unserviceable back ply from side board and supply & fix new plywood 6mm thick BWR as per existing size all as shown on drg.(Drawing No FD-241(M)

Remove the unserviceable shutters from side board and supply & fix new shutters made out of 18mm thick particle board exterior grade one side teak face and loumerical white all as shown on drgs.(Drawing No FD-241(M)

Remove of the old unsv existing drawers and supply and fixed new drawers made of 1st class hard seasoned teak wood free from knots duly french polished. (Drawing No FD-241(M)

All as per item No 21 here-in-before but for side board.(Drawing No FD-241(M)

Removing of old unsv existing top of side board and S&F new top made out of prelaminated particle board one side teak face and other side loumerical white exterior grade with french polished teak wood edging all around .Rest all as directed and as shown on drgs.(Drawing No FD-241(M)

Table 900x600x760mm without drawer/with drawer FD- (FD-42(m) ,FD-41(m) FD-291, FD-284,FD-283) :- Taking out old u/s top of table 900x600x760mm without drawer/with drawers & supply & fixing new top made out of prelaminated particle board bonded with phenol formaldehyde exterior gde 18/19mm thick one side teak veneered & other side having balancing white laminated duly fixing with 19x4mm thick teakwood beading all around the top complete all as specified and shown on drg. (Drawing No FD-42(M)

Removing old u/s following components of table 900x600x760mm with or without drawer & S/F with new components made out of 1st class well seasoned teakwood free from knots, cracks, sapwood etc all as directed & as shown on drg Legs (size 740x60x30mm) (Drawing No FD-42(M)

Long rails (740x25x65mm) (Drawing No FD-42(M)

Short rails ( size 440x25x65mm) (Drawing No FD-42(M)

Side rails (740x25x130mm) for FD/41/FD-42 (M)

S& F new drawer (Drawing No FD-42(M)

All as per item No 21 here-in-before but for Table 900x600x760mm without drawer/with drawer.

Table Computer:- Removing of old and u/s top of table computer and S& F new top made out of 18/19 mm thick Prelaminated particle board teak veneered finish and provided with beading of teak wood size 19x4mm alround the top fixed with 20mm pannel pin complete all as directed and as shown on drawing (Drawing No FD/E6/MAP/03)

Removing of old and u/s drawers of table computer and S& F new drawers made out of Ist class teak wood well seasoned and 6mm thick ply wood (5 ply) commercial BWR gde complete all as directed and as shown on drawing (Drawing No FD/E6/MAP/03)

Removing old & u/s knob from drawers of table computer clerk wooden & S/F new CP brass knob 35 mm dia of approved quality complete as directed (Drawing No FD/E6/MAP/03)

Taking out old U/S legs of table computer and S&F new long legs made out of 1st classs well teak wood complete all as directed and shown on drg. (Drawing No FD/E6/MAP/03)

Preparation of surface by Remove of existing polishing mark scratches from all exposed wooden surface to make clean and smooth with required grade of sand paper and finish with polish to bring the surface to require glossy finish and as directed by Engr-in-Charge. (Drawing No FD/E6/MAP/03)

Table dinning 4 Pers:- All as per item No 56 here-in-before but for Table dining 4 Pers (Drawing No FD-30(M) FD-1115)

Removing old & u/s legs of table dinning 4 pers & S/F new legs of size 740x60x60mm made out of 1st class well seasoned teakwood duly fixing PVC rubber shoe at the bottom of legs with mild steel screws complete all as directed & shown on drg.(Drawing No FD-30(M) FD-1115)

Taking out old & u/s long rail and S&F new long rail made out of 1st class well seasoned teakwood complete all as directed and shown on drg. (Drawing No FD-30(M) FD-1115)

All as per item No 70 here-in-before but short top rail. (Drawing No FD-30(M) FD-1115)

All as per item No 21 here-in-before but for Table dining 4 Pers. (Drawing No FD-30(M) FD-1115)

Teapoy verandah :- All as per item No 56 here-in-before but for Teapoy Verandah. (Drawing No FD-55(M) & FD-255(M))

Painting to the steel frame of Teapoy Varandah with two coats synthetic enamel paint (1st quality) white after removing the old dirt stains and rust completely all as specified and as directed by Engineer-in-Charge.(Drawing No FD-55(M) & FD-255(M))

Removing of old u/s rubber shoes from Teapoy Verandah & S/F new rubber shoes of apporoved quality & fixed at the bottom of legs of Teapoy Verandah (Drawing No FD-55(M) & FD-255(M))

Table dressing gents with mirror :- Removing worn out u/s frame of mirror and replace the same with new one made out of well seasoned teak wood of size 19x25x2320mm as per drg. (Drawing No FD-251, FD-32 (M))

Removing worn out u/s back ply of mirror and providing with new one ply wood 6mm thick of size 380x760mm and fixing the same in its original position as per drg with clits on back. (Drawing No FD-251, FD-32 (M))

Removing the worn out u/s broken mirror and replace the same with new one of size 380x760x5.5mm thick and fixing the same in its original position as per drg. Make-Golden Fish/Atul. (Drawing No FD-251, FD-32 (M))

Removing worn out u/s top of table and providing the new one made out of pre-laminated particle board of size 900x300x 18mm and fixing the same duly beading in its original position as per drg. (Drawing No FD-251, FD-32 (M))

Removing worn out u/s back of table and providing the new one made out of 1st class teak wood plank of size 900x135x12mm and fixing the same in its original position as per drg. (Drawing No FD-251, FD-32 (M))

Removing u/s worn out side of the table and providing the new one made out of 1st class teak wood plank of size 300x135x12mm and fixing the same in its original position.(Drawing No FD-251, FD-32 (M))

Removing u/s worn out bottom of table and providing the new one made out of 1st class teak wood plank of size 900x300x12mm and fixing the same in its original position. (Drawing No FD-251, FD-32 (M))

Removing the u/s worn out face of drawer and providing the new one made out of 1st class teak wood plank well seasoned of size 285x125x12mm and fixing the same in its original position. (Drawing No FD-251, FD-32 (M))

Remove side of drawer and providing the new one of size 280x115 (Back side) made out of 12mm thick well seasoned 1st class HW(Teak) and fixing the same in its original position.(Drawing No FD-251, FD-32 (M))

Remove side of drawer and providing the new one of size 280x130 made out of 12mm thick well seasoned 1st class HW(Teak) and fixing the same in its original position. (Drawing No FD-251, FD-32 (M))

Removing u/s ply from the bottom of drawer and providing the new one of 6mm thick BWR plywood of size 290x265 and fixing the same in its original position. (Drawing No FD-251, FD-32 (M))

Removing the u/s knobs and providing/fixing the new one chromium plated knob 40mm and as directed by Engr-in-Charge. (Drawing No FD-251, FD-32 (M))

All as per item 21 here-in-before but for table dressing gents.(Drawing No FD-251, FD-32 (M))

Repair to Table Dressing Ladies:- Remove unserviceable legs and providing the legs of size 150x45x45mm made out of well seasoned teak wood and fixing the same in its original position as per drg. (Drawing No FD-251)

Remove unserviceable stiffener and providing the new one of size 235x40x25mm made out of 1st class well seasoned teak wood and fixing the same in its original position as per drg. (Drawing No FD-251)

All as per item No 78 here-in-before but of size 650x40x25mm. (Drawing No FD-251)

Remove unserviceable top and providing/fixing the new one made out of 18mm thick pre-laminated particle board of size 900x380mm with 4mm thick teak wood beading on front side and fixing the same in its original position. (Drawing No FD-251)

Remove unserviceable side and providing the new one made out of 18mm thick pre-laminated particle board one side teak face and fixing the same in its original position.. (Drawing No FD-251)

Remove side of drawer and providing the new one of size 330x115mm made out of 12mm thick well seasoned 1st class HW(Teak) and fixing the same in its original position. . (Drawing No FD-251)

All as per item No 81 here-in-before but back of drawer of size 315x115x12mm as per drg.(Drawing No FD-251)

Remove the unserviceable ply wood from the drawer and providing/fixing the same with new one 6mm ply wood of size 315x330mm.(Drawing No FD-251)

Remove the knob and providing the new one chromium plated 40mm as approved/directed by Engineer in Charge and fixing the same in its original position.(Drawing No FD-251)

Remove broken sliding glass and providing new one of size 300x290x6mm as approved by Engineer in Charge and fixing the same in its original position.(Drawing No FD-251)

Remove the unserviceable aluminum channel double and fixing the same as per drg.(Drawing No FD-251)

Remove unserviceable mirror frame from its original position and providing the new frame made out of teak wood well seasoned size 3130x19x25mm and fixing the same in its original position as per drg.(Drawing No FD-251)

Remove the unserviceable broken mirror and providing the new one of size 1220x365x5.5mm thick Make-Golden Fish/Swastik or as approved by Engineer-in-Charge and fixing the same in its original position.(Drawing No FD-251)

Remove the ply wood from the back of the mirror and providing the new one made out of 6mm green ply BWR commercial and fixing the same in its original position as per drg.(Drawing No FD-251)

All as per item 21 here-in-before but for table dressing ladies(Drawing No FD-251)

Table writing :- All as per item No 56 here-in-before but for Table writing.(Drawing No FD-275)

Taking out old u/s sides of table writing and S/F new sides made out of 19mm prelaminated particle board one side teak veneered complete all as directed & shown on drg.(Drawing No FD-275)

Removing of old u/s shutters of table writing and S/F new shutter made out of 19mm thick prelaminated particle board one side teak veneered bonded with phenol formaldehyde exterior gde including fixing of new or old serviceable hinges 50mm MS medium wt complete all as directed & shown on drg.(Drawing No FD-275)

Taking out old & u/s drawers from table writing and supply & fix with new drawers made out of prelaminated particle board & 1st cl well seasoned teakwood for sides & 6mm thick commercial plywood for bottom of drawers complete all as directed & shown on drg.(Drawing No FD-275)

Removing of u/s MS hinges from shutters and S& F MS butt hinges 50mm medium wt cold rolled mild steel.(Drawing No FD-275)

Removing of u/s knobs from shutters & drawers of table writing and supply & fix new 35mm round brass knob of approved quality complete all as directed.(Drawing No FD-275)

Taking out old & u/s plywood back of table writing & supply & fix new 6mm thick 5 ply plywood commercial BWR gde type BB fixed with 20mm mild steel screws complete all as directed & shown on drg.(Drawing No FD-275)

Taking out old U/S long legs of table writing and S&F new long legs made out of 1st classs well teak wood complete all as directed and shown on drg.(Drawing No FD-275)

All as per item No 111 mentioned here-in-before but short legs of table writing.(Drawing No FD-275)

Remove the old existing long stiffener of table writing and S&F new long stiffiner made out of 1st class well seasoned teak wood of existing shape & size and making functional.(Drawing No FD-275)

All as per item item No 113 mentioned here-in-before but short stiffners of table writing.(Drawing No FD-275)

All as per item 21 here-in-before but for table writing .(Drawing No FD-275)

Charpoy GI Pipe with ply top :- Remove the existing unserviceable Ply wood from Charpoy GI Pipe and making the frame to its original position by tightening etc and Supply & fixing with new ply wood 12mm thick, commercial, BWR Grade (IS-303) of existing shape & size and as directed by Engr-in-Charge. (Drawing No FD-220)

Removing the unserviceable/broken check nuts form GI charpoy & supply and fix 6mm thick GI Medium grade check nuts suitable for 32mm dia GI pipe all as specified and shown on drawings (Each check nut will be measured as single unit) (Drawing No FD-220)

Removing the unserviceable broken 3 way GI elbow from GI charpoy and S & F 32 mm dia GI medium grade 3 way elbow ISI marked all as specified and shown on drg and directed by Engr-in-Charge (Each GI Elbow shall be measured as single unit) (Drawing No FD-220)

Removing the existing unserviceable/broken long rail from GI charpoy and S & F new long rail of GI tubing 32mm including cutting, threading and bringing the GI charpoy into the original shape as shown on drawing and directed by Engr-in- Charge. (Make: TATA/JINDAL). (Drawing No FD-220)

Making short rails obtained from item No 119 above and fixing all as shown on drawing. (Drawing No FD-220)

Making legs out of unserviceable long/short rails obtained from item 17.04 and 17.05 above including cutting, threading and fixing all as specified and directed by Engr-in-Charge.(Drawing No FD-220)

Sofa set 5 Seater FD-281 :- Removing of old worn out u/s front legs of sofa set 4 seater and providing /fixing new one made out of Teak wood well seasoned in existing shape and size and as directed by Engineer-in-charge. (Drawing No FD-281)

Removing of old worn out u/s rear legs of sofa set 4 seater and providing /fixing new one made out of Teak wood well seasoned in existing shape and size and as directed by Engineer-in-charge. (Drawing No FD-281)

Removing of old worn out u/s front rail of sofa set 4 seater and providing /fixing new one made out of Teak wood well seasoned in existing shape and size and as directed by Engineer-in-charge. (Drawing No FD-281)

Removing of old worn out u/s Back rail of sofa set 4 seater and providing /fixing new one made out of Teak wood well seasoned in existing shape and size and as directed by Engineer-in-charge. (Drawing No FD-281)

Removing of old worn out u/s back wdn bearers of sofa set 4 seater and providing /fixing new one made out of Teak wood well seasoned in existing shape and size and as directed by Engineer-in-charge. (Drawing No FD-281)

Removing of old worn out u/s bottom wdn bearers of sofa set 4 seater and providing /fixing new one made out of Teak wood well seasoned in existing shape and size and as directed by Engineer-in-charge. (Drawing No FD-281)

Remove the existing unserviceable sofa cushion from sofa set 4 seated and supply and fixing the new cushion 100 mm thick x 40 density of size 530x560mm covered with new tapestry cloth duly stitched.Make: Kurlon/sleep well(Drawing No FD-281)

All as per item 21 here-in-before but for sofa set 4 seater.(Drawing No FD-281)

Table bed side w/o drawer :- Removing of old worn out u/s legs of Table bed side W/O Drs and providing /fixing new one made out of Teak wood well seasoned in existing shape and size and as directed by Engineer-in-charge. (Drawing No FD-248)

Removing of old worn out u/s sides of Table bed side W/O Drs and providing /fixing new one made out of Teak wood well seasoned in existing shape and size and as directed by Engineer-in-charge. (Drawing No FD-248)

Removing of old worn out u/s top of Table bed side W/O Drs and providing /fixing new one made out of Teak wood well seasoned in existing shape and size and as directed by Engineer-in-charge. (Drawing No FD-248)

Remove the existing unserviceable ply wood from Table bed side W/O Drgs and supply and fixing with new plywood 6 mm thick BWR IS-303.(Drawing No FD-248)

Removing of old worn out u/s shelves of Table bed side W/O Drs and providing /fixing new one made out of Teak wood well seasoned in existing shape and size and as directed by Engineer-in-charge.(Drawing No FD-248)

All as per item 21 here-in-before but for Table bed side w/o drawer.(Drawing No FD-248)

Repair to Table Centre:-Remove the old unserviceable leg and providing the new leg made out of 1st class teak Wood seasoned of size 60x30x356mm high and fixing the same in its original position as per drg. (Drawing No FD-274,375)

Remove old broken top rail and providing the new top rail made out of 1st class hardwood teak of size 20x50x900mm and fixing the same in its original position as per drg.(Drawing No FD-274,375)

Remove old unserviceable top short rail and providing the new top rail of size 20x50x450mm and shape made out of 1st class HW well seasoned teak and fixing the same in its original position as per drg.(Drawing No FD-274,375)

Remove the old top and providing the new top made out of 18mm particle board one side laminated exterior grade with 4mm teak wood beading all around and fixing the same on table centre in its original position as per drawing (Drawing No FD-274,375)

All as per item No 21 here in before but for Table centre (Drawing No FD-274,375)

Chair Easy Remove of existing unserviceable under mentioned members and providing the new one made out of 1st class HW well seasoned (Teak) and fixing the same in its original position as per drg. Front Legs (Drawing No FD-229/17 (M))

Front rail of seat frame (Hole should be 12.5mm apart of each other) (Drawing No FD-229/17 (M))

Side Rail(Ditto complete) (Drawing No FD-229/17 (M))

Back Rail(Ditto complete) (Drawing No FD-229/17 (M))

Arm Rest (Drawing No FD-229/17 (M))

Remove the existing unserviceable canning and supply and weave with 2 mm thick new white plastic cane oval shape Godrej pattern and beading with 4mm thick new white plastic cane make Ajay /premier as approval by GE and providing new hard rubber shoes on legs below of chair Easy. (Drawing No FD-229/17 (M))

All as per item No 3.07 here-in-before but for Chair easy. (Drawing No FD-229/17 (M))

Chair CB Steel With Arm:- Removing the worn out paint by scraping from the steel surface, necessary preparation of surface for painting and welding wherever required, two coat of spray painting with synthetic enamelled paint olive green over a coat of Metal primer after dent/bent portion. Wooden surface should be black polish to required glazed and shine. (Drawing No FD-75(M)

Removing the worn out u/s seat frame and providing/fixing the new one of existing size made out of 1st class teak wood duly re-caning with new plastic cane 2mm thick oval shape for general weaving and 4mm thick plastic cane for beading all around as show in drg. Wooden frame should be finished with black polish and fix in its original position with required screw(plastic cane type-I HDPE). (Drawing No FD-75(M)

All as per item 149 here-in-before but back frame. (Drawing No FD-75(M)

Removing the worn out u/s handle made out of H.W(T.W) well seasoned and providing/fixing of exisiting size and shape with required screw after finish with black polish.(Drawing No FD-75(M)

Form w/o back:- Removing of U/S teak wood planks and S&F new planks mde out of teak wood 25mm thick x255mm wide x1525mm long duly french polished and fixed with 9 Nos GI Bolts . (Drawing No FD-77(M)

Removing of U/S legs from form w/o back and S&F new legs made out of 25mm sq conduit (16guage) of existing shape & size duly painted with black enamelled paint over a coat of primer. (Drawing No FD-77(M)

Removing of U/S stiffners of form w/o back S&F new stiffners made out of 25mm sq conduit (16guage) of existing shape & size duly painted with enamelled black colour over a coat of metal primer.(Drawing No FD-77(M)

Removing of U/S shoes of form w/o back and S&F new rubber PVC shoes of existing shape & size.(Drawing No FD-77(M)

Table office clerk steel :- Removing old broken damaged top of table office clerk steel and S/F new top made out of 18/19mm thick prelaminated particle board one side teak veneered with 19x4mm teak wood beading duly french polished all around the top. (Drawing No FD-84)

Removing old u/s internal cupboard/drawer locks from table office clerk steel and S/F new internal locks 40mm 4 lever with duplicate keys of approved quality.(Drawing No FD-84)

Removing old broken u/s rubber shoes of table office clerk steel and S/F new hard rubber shoes of approved quality & tightly fitted at the bottom of legs of table office clerk steel (Drawing No FD-84)

All as per item No 7 but for table office clerk Steel.(Drawing No FD-84)

Table office clerk wooden :- Removing of old and u/s top of table office clk and S& F new top made out of 18/19 mm thick Prelaminated particle board teak veneered finish and provided with beading of teak wood size 19x4mm alround the top fixed with 20mm pannel pin complete all as directed and as shown on drawing (Drawing No DB-4120)

Removing of old and u/s drawers of table office clk and S& F new drawers made out of Ist class teak wood well seasoned and 6mm thick ply wood (5 ply) commercial BWR gde complete all as directed and as shown on drawing (Drawing No DB-4120)

Removing old & u/s knob from drawers of table office clerk wooden & S/F new CP brass knob 35 mm dia of approved quality complete as directed (Drawing No DB-4120)

Removing of old and u/s long stiffners of table office clk and S& F new stiffners made out of Ist class teak wood well seasoned complete all as directed and as shown on drawing (Drawing No DB-4120)

Remove of the old unsv existing short stiffner and supply and fixed new short stiffner of existing shape and size made of 1st class hard seasoned teak wood free from knots duly french polished.. (Drawing No DB-4120)

Remove of the old unsv existing long rail and supply and fixed new rails made of 1st class hard seasoned teak wood free from knots duly french polished.. (Drawing No DB-4120)

Remove of the old unsv existing short rail and supply and fixed new rails made of 1st class hard seasoned teak wood free from knots duly french polished.. (Drawing No DB-4120)

Remove of the old unsv existing legs and supply and fixed new legs of existing shape and size made of 1st class hard seasoned teak wood free from knots duly french polished.. (Drawing No DB-4120)

All as per item No 21 here-in-before but forTable office clerk wooden.(Drawing No DB-4120)

M/S SINGH ENTERPRISE