Certain Repair to joinery floor roof plumbing sanitary fittings plastering work etc in MD and OTM accn in the area of AGE B/R-II under GE (N) Ahmednagar

Amount

Dismantling of stone slabs and tiles of any description or thickness in floors, approns etc laid and bedded in any mortor etc complete all as specified and directed by Engineer-in-Charge

Demolition of plain cement concrete (unreinforced) in ground floor not exceeding 15 cm thick etc complete all as specified and directed by Engineer-in-Charge

Material and labour for 75 mm thick plain cement concrete (1:4:8) type D2, using 40 mm graded stone aggregate as in sub base etc complete all as specified and directed by Engineer-in-Charge

Material and labour for joint free / rectified non skid ceramic coloured tiles non skid of somany or equivalent makes as specified in PS, 8-10 mm thick as approved by GE (square / rectangular) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm, as in floor etc laid over and including screed bed 15 mm thick in cement and sand mortar (1:6) set and jointed grey cement slurry & pointed with with white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

Material and labour for coloured glazed ceramic tiles digitally printed premium series of size 450mmx300mm , 8-10 mm thick as approved by GE as in dado/skirting or on vertical surfaces, over and including 10 mm thick backing coat in cement and mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

Material and labour for Vitrified ceramic tiles double charge/ultra charge ,10 mm thick (square / rectangular) of size 600 x 600 mm of any shade as approved by GE in floor etc laid over and including roughning existing surface , making good the damaged surface, levelling, and fixing with cement based tile adhesive ( Make FOSROC, DR FIXIT) as per the manufecturer's instructions and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

Material and labour for Vitrified ceramic tiles double charge/ultra charge ,10 mm thick (square / rectangular) of size 600 x 600 mm of any shade as approved by GE in floor etc laid over and including screed bed 15 mm thick in cement and sand mortar (1:6) set in grey cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

All as per item No 07 (here-in-before) but on skirting over and including 10mm thick backing coat in cement sand mortar (1:4).

Material and labour for 20mm thick pre-polished granite stone slab of approved shade and colour Jet Black / Telephone Black as in top table, top of WHB, kitchen slab/platform, steps, gate pillars, cills, jambs, lintel etc or on vertical surfaces including vertical projection, full round moulding the edge laid over and including screed bed 15mm thick in cement and sand mortar (1:4) jointing with gray cement and pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite and rubbing and polishing to achieve mirror finish etc complete all as specified and directed by Engineer-in-Charge

Material and labour for machine cut cudappah stone slab 20-25 mm thick laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed by Engineer-in-Charge

Demolition of plain cement concrete solid block masonary built in cement mortar etc complete all as specified and directed by Engineer-in-Charge

Material and labour for Pre-cast cement concrete (1:3:6) (using 20 mm graded stone aggregate) type-C-1 block masonry with solid blocks, exc. 10 cm in width and setting in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

Taking down cement plaster on brick / stone walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge

Material and labour for rendering, 15 mm thick on stone/brick / concrete surfaces in cement and sand mortar (1:6) surfaces finished even and smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge

Dismantling of single layer manglore pattern in roofing etc complete all as specified and directed by Engineer-in-Charge

All as item No 15 (here-in-before) but bedded in cement and sand mortar

Dismantling battens for tiles, shingles etc of any size including tilting fillets spacing exc 15 cm

M&L for roofing tile, manglore pattern interlocking at sides joints laid dry etc complete all as specified and directed by Engineer-in-Charge.

All as item No 18 (here-in-before) but except manlore pattern tiles

M&L for Ridge or hip tiles to suit mangalore pattern of roofing tiles, bedded and jointed in cement and sand morter (1:6) etc complete all as specified and directed by Engineer-in-Charge

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including ridge etc complete all as specified and directed by Engineer-in-Charge

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall,fixed with self tapping screws etc complete all as specified and directed by Engineer-in-Charge

Supply and fix 0.50 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs vitreous china wash down water closet (Pedestal pattern) white including fixing bolts with and including plastic water closet seat cover closed pattern with flat bottom and cover and MSCP almn hinges device complete connecting to 'P' or 'S' trap etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs vitreous China white squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest set in cement concrete (1:3:6) including flush pipe and connecting to trap / flushing cistren etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs wash hand basin vitreous China, flat back of size 550 X 400 mm including a pair of brackets, PTMT waste coupling, 32 mm dia PVC flexible waste pipe and connecting to stop valve and nahani trap etc complete all as specified and directed by Engineer-in-Charge

M&L for preparing new plastered old surfaces and applying two coats of oil bound distemper on wall including smooth roller finish etc complete all as specified and directed by Engineer-in-Charge

M&L for preparing old unplastered or plastered old surfaces and applying one coat of oil bound distemper on wall including smooth roller finish etc complete all as specified and directed by Engineer-in-Charge

M&L for preparing new plastered surfaces and applying two coats of cementpaint on walls etc complete all as specified and directed by Engineer-in-Charge

M&L for preparing old unplastered or plastered surfaces and applying one coat of cement paint on walls etc complete all as specified and directed by Engineer-in-Charge

Taking down chowkats or frames exc 1.5 Sq m but nexc 4.00 sqm with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge

Taking down chowkats or frames n exc 1.5 Sq m with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge

Taking down shutters of any description exc 1 sqm and n exc 2 sqm each etc complete all as specified and directed by Engineer-in-Charge

Supply and fix pressed steel frames of size 105 mm X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed by Engineer-in-Charge

Material and labour for filling in door frames in plain cement concrete, 1:2:4 type B0, using 12.5 mm graded stone aggregates etc complete all as specified and directed by Engineer-in-Charge

Supply and fix 35 mm thick factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm thick B.W.P. commercial plywood. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated etc complete all as specified and directed by Engineer-in-Charge

S&F 35mm thick 2nd class hard wood Plain, framed, panelled shutters (any number of panels), with lock rail and panel of 9mm thick BWP, commercial plywood and fitted to chowkats etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides etc complete all as specified and directed by Engineer-in-Charge

Supply and fix 35 mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) etc complete all as specified and directed by Engineer-in-Charge

Supply and fix solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing Factory Made Solid PVC Moulded Door Shutter, with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face etc complete all as specified and directed by Engineer-in-Charge

Material and labour for second class hard wood beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc.and removing old beads etc complete all as specified and directed by Engineer-in-Charge

M&L for Steel windows with side hung shutters including projecting type hinges with steel handles and steel peg stay, complete with glazing bars, dovetailed or welded etc complete all as specified and directed by Engineer-in-Charge

Welding in repairs n exc 2.5 cm in length thickness of metal exc 6mm but not exc 9 mm including window made proper fuctional etc complete all as specified and directed by Engineer-in-Charge

Supply and fix stainless steel wire cloth 0.56 nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples etc complete all as specified and directed by Engineer-in-Charge

Supply and fix mild steel butt hinges medium weight cold rolled of size 100mm etc complete all as specified and directed by Engineer-in-Charge

Supply and fix aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of cast aluminium alloy and fixed 300mm long etc complete all as specified and directed by Engineer-in-Charge

Supply and fix aluminium anodised barrel tower bolt of extruded section 200mm long etc complete all as specified and directed by Engineer-in-Charge

Supply and fix aluminium anodised handles of extruded section 150mm long etc complete all as specified and directed by Engineer-in-Charge

Material and labour for two coats of synthetic enamel paint over a coat of pink primer for new wooden surfaces of any description exc 10 cm width or girth including preparation of surfaces and smooth finish with roller etc complete all as specified and directed by Engineer-in-Charge

Material and labour for two coats of synthetic enamel paint over a coat of red oxide primer for new steel surfaces of any description exc 10 cm width or girth including preparation of surfaces etc complete all as specified and directed by Engineer-in-Charge

Supply and fix mild Steel 20 mm dia decorative powder coated curtain rods with fixing brackets fixed in repairs etc complete all as specified and directed by Engineer-in-Charge

Supply and fixed in repairs 32 mm dia PVC waste pipe(outlet pipe) plain fixed to waste coupling of WHB or Sink etc complete all as specified and directed by Engineer-in-Charge

Supply and fixe in repairs stainless steel kitchen sink matt finish with draining over all size 950 X 510 mm and bowl size 410 X 410 X 230 mm, made out of 1.00 mm thick SS sheet of high quality including a pair of brackets, waste coupling, plug and chain, 32 mm dia PVC flexible waste pipe and nahani trap etc complete all as specified and directed by Engineer-in-Charge

S&F stainless steel kitchen plate rack made out of 0.63 mm thick stainless steel sheet of size 36''x 36''x 10'' with complete accessories including screws etc complete all as specified and directed by Engineer-in-Charge .

S&F in repair wall mixture, with provn for overhead shower etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair health faucet (hand shower) with 8 mm dia 1 m long flexible tube wall mounted / hooked etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair bib tap, 15 mm dia, CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs stop valve cast copper alloy, fancy type screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair 15 mm dia pillar tap, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs, shower rose with shower arm etc complete all as specified and directed by Engineer-in-Charge

S&F in 10 mm thick toughen glass for shelves in corner etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs decorative towel ring recangular chromium plated fixed with (CP) brass screws of approved qualityas etc complete all as specified and directed by Engineer-in-Charge

Hacking out old broken glass (any thickness size,quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads n'exc 1.5 Sqm etc complete all as specified and directed by Engineer-in-Charge

Material and labour for glazing with 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair galvanised mild steel wire cloth 0.56 nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples etc complete all as specified and directed by Engineer-in-Charge

S&F in repair Brass Chromium Plated toilet paper holder fixed with (CP) brass screws of approved quality etc complete all as specified and directed by Engineer-in-Charge

Supply and fix rotational moulded polyethylene water storage tanks double layer ISI marked conforming to IS 12701-1996 (cylindrical vertical with closed top) and made out of virgin FDA approved polyethylene material of 500 litres capacity hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connecting including taking down old water storage tank etc complete all as specified and directed by Engineer-in-Charge

All as per item No 68 (here-in-before) but 1000 ltrs etc.

Material and labour for special treatment to sunken slab floor incl WC trap etc including cleaning and preparing the surface area for carrying out membrane water proofing treatment, then injection grouting the weak areas on the concrete surface with cementitious grout and applying 10mm thick cement plaster in cement and sand mortar (1:4). Then providing and laying Mineral Top APP (Atactic Polypropylene Polymer) modified prefabricated 5 layer 4mm thick water proofing membrane, black finished rainforce with non woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 Litre per Sqm by the same membrane manufacturer of density at 25ºC, 0.87-0.89 Kg per litre and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torach and sealing all joints etc and preparing the surface complete. and providing PCC 1:5:10 type E2 using 40mm graded mechanically crushed stone aggregates in sunken slab and 75mm thick PCC 1:4:8 type D2 using 40mm graded mechanically crushed stone aggregates as base, 40mm bore GI pipe, light grade of length not less that 50 cm as spout, etc complete all as specified and directed by Engineer-in-Charge Note : Work has to be carried out strictly by the authonticated applicator of the manufacturer and as per manufacturers specification as approved by GE.

M&L for filleting in any position and any shape in cement and sand mortar (1:4) including mitered stop etc sectional area of fillets not exc 10 sqcm as in for dado/ skirting top.

S&F in repairs PVC connections 15 mm size with Stainless steel Nuts of length 600mm etc complete all as specified and directed by Engineer-in-Charge

S&F for stainless steel grating without waste holes 100 mm dia etc complete all as specified and directed by Engineer-in-Charge

S&F for stainless steel grating with waste holes 100 mm dia etc complete all as specified and directed by Engineer-in-Charge

S&F for PVC (SWR) floor trap, plain with grating including jointing with solevent cement 75 mm bore etc complete all as specified and directed by Engineer-in-Charge

S&F for low density polyethelene pipes 32 mm bore (LDPE) of pressure rating 6 Kg/cm² laid in trenches/fixed to wall etc complete all as specified and directed by Engineer-in-Charge

Supply and fix repairs PVC valveless, syphonic action type, flushing cistern,low level, all accesories etc complete all as specified and directed by Engineer-in-Charge

Taking up or down steel tubing and connections,15 mm bore etc complete all as specified and directed by Engineer-in-Charge

All as per item No 78 (here-in-before) but 20mm bore

S&L of CPVC pipes SDR 11 including fittings in trenches, 16mm outer dia fixed to walls /ceiling or laid in trenches incl all necessary fittings etc complete all as specified and directed by Engineer-in-Charge

All as per item No 80 (here-in-before) but 20mm outer dia etc.

Supply and fix coloured anodised aluminium three track window made out of Jindal aluminium sections Nos 20671,20672,20690 & 20668 including fixing 5 mm thick plain sheet glass and stainless steel wire guaze as per PS including necessary locking arrangement etc complete all as specified and directed by Engineer-in-Charge Note : (i) 5mm thick sheet glass & stainless steel wire gauge will be measured and paid separatly under relevant item of BOQ. (ii) Weight of aluminium frame for windows will be measured for payment.

S&F coloured anodised aluminium ventilator as per PS and make approved by GE including all fittings locking arragement including fixing glazing, guazing and fixed with suitable size of screws etc complete all as specified and directed by Engineer-in-Charge Note : (i) Glazing & gauzing will be measured and paid separatly under relavant item of BOQ. (ii) Weight of aluminium frame for ventilator will be measured for payment.

M&L for framed work such as guard bars/ grill /gratings etc with ends of bars shouldered and/or riveted or gorged into spikes confroming to FE-290, Gde -E- 165 etc complete all as specified and directed by Engineer-in-Charge

Taking down shutters of any description exc 1 sqm and n exc 2 sqm each and refixing in the same opening including easing and adjusting and also refixing builders hardware as required including renewal of unservieable screws etc complete all as specified and directed by Engineer-in-Charge

Material and labour for special treatment to sunken slab floor incl WC trap etc with injection grouting the weak areas on the concrete surface with cementitious grout etc complete all as specified and directed by Engineer-in-Charge Note : Work has to be carried out strictly by the authonticated applicator of the manufacturer and as per manufacturers specification as approved by GE.

M&L for 2 mm thick wall care putty on wall (One layer) etc complte all as specified and directed by Engineer-in-Charge

S&F PVC Mirror Cabinet Make Cat Part No 555 of Prayag or equivalent make mentioned in list of makes in Appendix `C' etc complete all as specified and directed by Engineer-in-Charge

Supply and fix tubular towel rail, brass chromium plated 20 mm dia `D' type, 60 cm long between flanges including a pair of brackets etc complete all as specified and directed by Engineer-in-Charge

M&L in repairs for false ceiling with vinyle faced Arn-GYP-FB, celing 600 x 600 x 9mm thick with washable metallized polyster foil backing with vinyle covered edges supporting sections shall be of sutable size from same makes embossed on section and level adjuster duly suspended by 2mm dia GI wire fixed to roof at 600mm center to center as per manufacturere,s instruction and etc complete all as specified and directed by Engineer-in-Charge Make : Armstrong or equivalent in Saint Gobin/Lafarge

M&L in repairs for false ceiling with vinyle faced Arn-GYP-FB, celing 600 x 600 x 9mm thick with washable metallized polyster foil backing with vinyle covered edges etc complete all as specified and directed by Engineer-in-Charge Make : Armstrong or equivalent make mentioned in list of makes in Appendix `C'.

M & L for providing water proofing treatment on roofs, as per manufacturere's instructions and as specified after taking down/out as existing at site etc complete all as specified and directed by Engineer-in-Charge

(a) Cleaning the newly plasterd surfaces with wire brushes and applying a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surface etc complete all as specified and directed by Engineer-in-Charge

(b) Applying and laying torch APP polymer modifiedbituminous membrance 3mm thick with non woven polyster matt as reinforced weighing not less than 3 kg/sqmts by therofusion process as per manufacturers specification including applying one coat of aluminium paint Make : Super Thermolay of STP or equivalent in TEXSA India Ltd / IWL Ltd / Tiki Tech etc complete all as specified and directed by Engineer-in-Charge

Material and labour for plastering 10 mm in cement and sand mortar (1:3) using 100 % course sand on roof mixed with and including WPC @ 3% by weight of cement and finished the surface even and smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge

Material and labour for glazing with 5 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs vitreous china wash down water closet (wall hung Toilet complete with flushing cistern complete) white MARVEL single piece including fixing bolts with and including plastic water closet seat cover closed pattern with flat bottom and cover and MSCP almn hinges device complete connecting to 'P' trap etc complete all as specified and directed by Engineer-in-Charge.

An amount of Rs 89,475.00 shall be deducted from BOQ on account of schedule of credit

M/S MAHESHWARI ENTERPRISES

Avinash B Kullal

PRAVIN NANDKUMAR WARULE

Arihant Construction

M/S SHOURYA ENGINEERS AND CONTRACTORS

M/s.D.K.ALKUTE