Restoration to the rented TE building Vacated at Kuttaikulam Aranthangi to the Original Condition for making over to the Building Owner

Amount

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:

Asbestos cement sheet

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

In cement mortar

Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

Of area 3 sq. metres and below

Of area beyond 3 sq. metres

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

Second class teak wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: Butt hinges and necessary screws shall be paid separately)

Second class teak wood A)30 mm thick shutters

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.

Float glass panes A) 4 mm thick glass pane (weight not less than 10 kg/sqm).

Deduct for providing pin headed glass panes instead of ordinary float glass panes 4 mm thick (weight not less than 10 kg per sqm) in doors, windows and clerestory windows shutters (Area of opening for glass panes excluding portion inside rebate shall be measured).

Renewing glass panes, with wooden fillets wherever necessary:

Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm).

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

Fixed to openings /wooden frames with rawl plugs screws etc.

Providing and fixing M.S. round or square bars with M.S. flats at required spacing in wooden frames of windows and clerestory windows.

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.

40 mm thick with 20 mm nominal size stone aggregate

Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete.

12 mm cement plaster of mix :

1:6 (1 cement: 6 fine sand)

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge.

With cement mortar 1:4 (1 cement : 4 fine sand).

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.

With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre.

With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :

Two or more coats on new work.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:3:6 (1 Cement : 3 coarse sand(zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources).

Dismantling Urinals of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

Providing and fixing PTMT bib cock of approved quality and colour.

15 mm nominal bore, 122 mm long. Weighing not less than 99 gms.

Removal of clamps of electrical wiring from the walls and making the holes with white cement, in all rooms pf the ground Floor including disposal of the unserviceable materials etc., complete as directed by the Engineer-in-Charge.

Removal of clamps of electrical wiring from the walls and making the holes with white cement, in all rooms pf the first and Second Floor including disposal of the unserviceable materials etc., complete as directed by the Engineer-in-Charge.

Fixing in position available Wooden Window of size 0.91x1.22m including MS Grill with necessary hold fasts, etc., all complete as per direction of Engineer-in-charge.

Fixing in position available wooden Door Shutter of size 0.93x1.73 m with necessary hinges/screws, etc., all complete as per direction of Engineer-in-charge.

Removal of BTS Boot and its fixtures in the wall and finishing with cement mortar, etc, all complete as per direction of Engineer-in-charge.

Removal of canle entry pipe in the wall and closing the hole using bricks with cement mortar, etc, all complete as per direction of Engineer-in-charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and fixing Cuddappah stone slabs upto 30 mm thick in cupboards with cement mortar 1:4 (1 Cement:4 Coarse Sand) etc,. Complete as durected by the Engineer-in-Charge.

Closing the hole of 015x0.15x0.15m in the walls using bricks with cement mortar including plastering the sides etc., complete as directed by the Engineer-in-Charge.

Closing the hole of 0.11x0.38x0.13 m in the walls using bricks with cement mortar including plastering the sides etc., complete as directed by the Engineer-in-Charge.

Closing the hole of 0.15x0.38x0.20m in the walls using bricks with cement mortar including plastering the sides etc., complete as directed by the Engineer-in-Charge.

Closing the hole of 0.35x0.38x0.23m in the walls using bricks with cement mortar including plastering the sides etc., complete as directed by the Engineer-in-Charge.

Closing the hole of 0.20x0.38x0.20m in the walls using bricks with cement mortar including plastering the sides etc., complete as directed by the Engineer-in-Charge.

Closing the hole of 0.25x0.38x0.15m in the walls using bricks with cement mortar including plastering the sides etc., complete as directed by the Engineer-in-Charge.

Closing the hole of 0.30x0.38x0.18m in the walls using bricks with cement mortar including plastering the sides etc., complete as directed by the Engineer-in-Charge.

Closing the hole of 0.38x0.38x0.31m in the walls using bricks with cement mortar including plastering the sides etc., complete as directed by the Engineer-in-Charge.

Closing the hole of 0.45x0.38x0.35m in the walls using bricks with cement mortar including plastering the sides etc., complete as directed by the Engineer-in-Charge.

Closing the hole of 0.10x0.10x0.05m in the loft slab using cement concrete including plastering the sides etc., complete as directed by the Engineer-in-Charge.

Closing the exhaust fan hole of 0.45 m dia. in the walls using bricks with cement mortar including plastering the sides etc., complete as directed by the Engineer-in-Charge.

Dismantling the Earth Pit chamber of size 450x450 mm including disposal of the unserviceable materials etc., complete as directed by the Engineer-in-Charge.

Credit for the damaged country wood window of size 1.00 x 1.52 m

Credit for the damaged country wood window of size 0.90 x 1.22 m

Credit for the damaged country wood window of size 0.90 x 2.05 m

Credit for the damaged Rolling Shutter of size 3.00x2.43m

Credit for the Steen sections

Cleaning the Terrazo tiled flooring (Mossaic) including rubbing and polishing the flooring with necessary polishing matreials, etc, all complete as directed by the Engineer-in-Charge

K ABBAS MANTHIRI (BID ID -881997)