Construction of New Urban Police Station building with development works at Anupparpalayam in Tiruppur City.

Amount

1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

b. 2 to 3 mt.

1.5 : Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

b. 2 to 3 mt.

1.6 : Earth work excavation for Open foundation for drains (excluding refilling) width upto 1.25mt. a. 0 to 2 mt.

2.4: Supply and filling of 20 mm Brick jelly

7.2 : Providing Bitumen pad for Expanision joint

13.1 : Filling with Excavated Earth

21.2 : Teak wood Wrought & Put up a. T.W. over 2 m & below 3 m

b. T.W. below 2 m length.

23.3 :S&F of Magnetic door catches

25 : M.S.Holdfast

30 : Ellispattern

31 : Weathering course

37.1 : White washing 3 coats (slaked)

39 : S & F of M.s Grills

40 : Painting - New "wood work"

41 : Painting - New "iron work"

46 : S & F 20 mm dia Alu. Hanger Rod

47 : S & F Alu Towel rail 75 cm long

48 : S & F 5 pin Coat stand

49 : S & F chromium plated 8 guage Picture Hook

50.3: Supply and planting avenue trees

50.4 : Providing Tree guard

51.2 : HDPE water tank 1000 liters capacity

52 : PVC Water supply (ASTM) a. 32 mm dia

b. 25 mm dia

53.3 :C.I Steps (5Kg)

Electrical arrangements 69 : 15 Amp. Power plug

72 : Box type Fibre Fan hook

74 : Charges for fixing of "Fan"

76 : 8 SWG wire

78 : Earthing Station IS3043 (Type I)

81 : Meter cupboard

86 : Anti termite treatment

112 : S&F of Exhaust fan 300mm dia

ANNEXURE-I 2.1.1 : Supplying and filling with gravel (including tax collected by the Govt.)

2.1.3 : Filling crushed stone sand

3.1.1 : C.C.1:5:10 for Foundation & Basement (using crushed stone sand)

3.2.1 : P.C.C. 1:2:4 for Foundation & Basement and other similar works (using crushed stone sand)

3.8.1 : P.C.C. 1:3:6 using 20 mm broken metal (using crushed stone sand)

6.2.1.1 : Brick work in C.M. 1:5 (F& B) with Admixture using Fly ash bricks of size 230x110x70mm in Foundation and Basement

8.1.1.1 : Standardised concrete Mix M20 Grade concrete. (using crushed stone sand) a) In Foundation and Basement.

b) In stilt / Ground Floor

c) In First Floor.

d) In Second Floor.

e) In Third Floor.

9.2.1.1: Brick work in Cement Mortar 1:6 (One of cement and six of Crushed stone sand) with Admixture using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² for superstructure in the following floors a. In Stilt / Ground floor

b. In First Floor

c. In Second Floor

d. In Third Floor

10.2.1.1 : Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand with Admixture) 110mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in the following floors b.In Stilt / Ground Floor

c. In First Floor

d. In Second Floor

11.2.1.1 : Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand with Admixture) 70mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² for superstructure in the following floors a. In Stilt / Ground Floor

b. In First Floor

c. In Second Floor

14.1.1.II : Precast Cupboard slab 40mm tk using standardised concrete mix M20 grade.(using crushed stone sand) a. In Foundation and Basement

b. In Stilt / Ground Floor

c. In First Floor

d. In Second Floor

15.1: Cuddappa slab 20 mm tk.for C/B slab. a. In Ground Floor

c. In First Floor

d. In Second Floor

18.1 : Formwork using M.S.Sheet a.For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc.,

b.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works

c.For Square and rectangular columns and small quantities

d. For Vertical wall

f.Curved surface

21.5.2 : Supply and Fixing Soild UPVC door Shutter with frame

21.5.5.1 : Supplying and fixing of Single Leaf solid core flush door shutter of thickness 35mm b) door size 900 mm x 2100mm (Single Leaf)

b) door size 1000 mm x 2100mm (Single Leaf)

22.3.2. : T.W. frame & TW styles & rails with BWR double leaf shutters for cup board/ ward robes including two coat enamel paint & one coat primer.

22.7.1 : Supply & Fixing of teakwood glazed french window shutters and 5.5mm thick plain glass for panels including labour charges and cost of furniture fittings a) French window Size 1650mm X 2100 mm

b) French window Size 1000mm X 2100 mm

23.1.1 : TW styles & rails with 9mm thick BWR single leaf shutters with brass screws size of a. 900x2100 mm

23.2.1 : 4mm thick plain Glass panels with Aluminium beedings

23.5: Supplying and fixing of MS door of following Size (lockup) a) door size 1000 mm x 2100mm

24.1.1: Supply & Fixing of MS ventilator of following size a) MS ventilator of size 1000 mm x 600 mm( lockup)

a) MS ventilator of size 600 mm x 600 mm( lockup)

26.1 : Flooring in C.C.1:5:10 (using crushed stone sand)

28.1 : Floor plastering in C.M. 1:4, 20 mm tk. (using crushed stone sand) including plasticizer

29.8.1 : Glazed tiles using Grout (Tile Joint Filler) (using crushed stone sand)

29.9.1 : Floor ceramic tiles using Grout (Tile Joint Filler) (antiskid) (using crushed stone sand)

32.1.1: Finishing top of roof with one course of Hydraulic Pressed Tiles of approved superior quality of size 23cmx23cmx 16 to 18mm thick laid over weathering course in cm 1:3 (One of cement and three of crushed stone sand) 12mm thick mixed with Water proofing compound at 2%

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) including plasticizer

34.1 : Plastering in C.M. 1:4, 12 mm tk.(using crushed stone sand) including plasticizer

35.1.1 : Plastering in CM 1:3, 12mm with WPC (using crushed stone sand) including plasticizer

35.1.2 : Spl. Ceiling plastering in C.M. 1:3, 10 mm tk. (using crushed stone sand) using plasticizer

36.1 : Cement mortar Border in C.M. 1:5, 12 mm tk. (using crushed stone sand) a. 150 mm wide

b. 75 mm wide

c. 50 mm wide

38.7 : Painting with two coat of Plastic Emulsion PAINT including primer for inner walls

38.7.1 : Painting with two coat of Exterior Emulsion PAINT including primer for outer walls

43.1 : Supply & Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

44.2.: Rain water harvesting using defunct borewell and providing perforated cover slab (M20) a). Providing pit

b) Augering 30cm dia

44.6 : PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe

50.2.1 :Providing precast Kerb stone in C.C. 1:3:6, 450 x 300 x 150 mm (using crushed stone sand)

50.6.1 : Precast slab 50 mm tk.in C.C. 1:3:6 with fibre (using crushed stone sand)

52.4 : 20mm dia PVC water supply ASTM pipe (fully consealed in walls)

53.4 : S&F of C.I Manhole cover 60 x 60 cm (50kg weight )

53.5.1 : Wash Hand Basin of size 550 x 400 mm (White without Pedestal)

54.1.1 : S & F of 15mm dia half turn CP long body tap

54.2.1 : S & F of 15mm dia half turn CP short body tap

56.3.1: S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - In G.F.(using crushed stone sand)

56.4.1 :S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - Other than G.F.(using crushed stone sand)

57.1.1: S & F of E.W.C (White) 500mm with "P" or "S" TRAP (using crushed stone sand).

58.3 : PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

58.4: Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.

58.5. :PVC(SWR) pipe with ISI mark - type 'A' for Ventilating shaft with cowl

59.2.1 : Gully Trap using chamber burnt bricks of size 23 x 11.4 x 7.5 cm (using crushed stone sand)

60.1 : PVC Nahani trap (4way/2way)

61.3 : UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

b. 160 mm UPVC Non Pressure pipe

62.1.1 : PVC Specials as per IS 10124/1982 Part II a. 110 mm dia PVC bend

b. 160 mm dia PVC bend

62.2.2 : PVC Equal Tee as per BIS 7834/1975 a. 110 mm dia PVC Equal tee

b. 160 mm dia PVC Equal tee

64.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. a. Light point with ceiling rose

b. Light point without ceiling rose

c. Calling bell point with Buzzer/Calling bell

65.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point

66.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point

67.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself

68.2 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places

75.1.2 : Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer

77.5 : Run of 2 Wires of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.6 : Run of 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.7 : Run of 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

80.1 : Supplying and fixing of 450 x 375 x 20 mm thick TW plank

87.1 : Supplying and fixing of Three phase ELCB/RCCB

98.3.2 : TW Double leaf panelled door shutter (with brass Fittings) a. 1800 x 2400mm.

344.2: S&F of Bevelled edge mirror 500 x 400 x 5.5mm

361.1 : Concrete designer tiles flooring (using crushed stone sand)

361.5.1: Supply & laying virtifed tile (ivory) flooring with tiles size 600 x 600 x 8mm for flooring and other similar works in cement mortar 1:3 (one of cement and three of CS sand) 20mm thick including pointing.

367 : Providing wooden Melamine polish for new wood work

379.4.2.1 : S&F of Granite slab (Super Fine Polished with Machine Cut Edges) of sizes 4’x2’ and above 18mm to 20mm thick) flooring in CM 1:3 20mm thick including pointing (Jet black) (using crushed stone sand)

384: S&F of PVC flushing cistern

448.2: Providing PVC Tee with end cap

ANNEXURE - II A1: Wallputty ( two coat)

A2:Painting the ceiling with one coat Plastic Emulsion PAINT incl. Primer

A3:Supplying and fixing in position of UPVC Ventilator louvered ventilator type for all sizes

A4: Supplying and fixing in position of UPVC window of casement type( open) for all sizes

A5: Supply and fixing of UPVC Sliding Window (Two Track)

A6: Supplying and fixing of 20 mm CPVC Pipe in Above Ground Level

A7: Supplying and fixing of 80 mm dia GI Pipe GI Pipe Below Ground Level

A8: Supplying and fixing of 80 mm dia GI Pipe GI Pipe above Ground Level

A9:Supplying and fixing 80mm dia G.I.Bend

A10: Supply and fixing of 100A TPN sheet double break switch with HRC fuse and neutral on suitable angle iron frame work with MS cable entry boxes and with PWD earthing

A11: Supply and delivery of following size PVC Armoured UG Cable a) 2 core 10 sq.mm. PVC Armoured UG Cable

b) 3.5 core 70 sq.mm. PVC Armoured UG Cable

c) 4 core 10 sq.mm. PVC Armoured UG Cable

A12: Labour charges for laying of PVC Armoured LTUG Cable in Below Ground Level

A13: Supply and fixing of following size brass cable gland PVC LTUG aluminium armoured cable with earth connection a) 2 core 10 sq.mm PVC LTUG aluminium armoured cable

b) 4 x 10 sq.mm. PVC LTUG aluminium armoured cable

c) 3.5 core 70 sq.mm. PVC Armoured UG Cable

A14: Supply and providing cable end termination of the following size cable with necessary aluminium cable sockets by crimping etc with electrical connection complete a) 4 x 10 sq.mm. PVC LTUG aluminium armoured cable

b) 2 x 10 sq.mm. PVC LTUG aluminium armoured cable

c) 3.5 x 70 sq.mm. PVC LTUG aluminium armoured cable

A15: Supply and delivery of MCB ISOLATORS a) 40A - FP

A16: Supplying and fixing of 15 Amps 3 pin flush type plug socket (AC Point )

A17: Supply and fixing of 9 watt LED bulb

A18: Supply and fixing of 4' 18 watt LED Tube Light

A19: Supply and fixing of Bulk Head fitting suitable for 12W LED Bulb

A20: :Supplying and fixing of 25W LED street light fittings etc.,

A21: Supply and fixing of 12 watts LED bulb

A22: Run of 4 Wires of 6 sqmm PVC insulated single core multi strand

A23: Charges for conveying and fixing of UG cables of sizes 4 to 25 Sqmm of 2, 3,3.5 and 4 core with necessary MS clamps, brass screws including cost of all materials redoing the dismantled portion, etc.,

A24: Supply and fixing of spot light (MASTER LED 3W-12 W) including labour charges for fixing of light

A25:Supplying of Rubber Moulded Hydraulic Pressed Paver Block 83mm thick

A26: Supplying and fixing of 6way DB

A27: Supplying & fixing of Stainless steel Hand Rails for Staircase

A28: Supplying and fixing of CP Angle valve Stop cock

A29: Supply and delivery at site and fixing of SFRC manhole cover with frame with locking arrangement a. 900mm x 900mm

b. 750mm x 750mm

A30: Supplying and fixing of MS angle of size 50 x 50 x 5 mm

A31: Supplying and fixing of CP Shower Arm with Overhead shower rose

A32: Supply and fixing of CP Shower Valve with Wall Flange

A33: Supply and fixing of 6Amps to 32 Amps single pole MCB

A34: Supply and fixing of CP two way bip cock with health faucet

A35: Supplying of 20 feet street light pole

A36: Supplying and fixing of 5 Amps Flush Type Wall Switch

A37: Providing Polymer Coating (Water Proof Coating)

P SELLAPPAGOUNDER (BID ID -1498518)