Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹4.5 L
EMD Value
₹8,958
Closing Date
9 Nov 2026, 3:00 pm4d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer
EEMCPH DIVISION NO 3 SECTOR 37 CHANDIGARH
Making bye pass arrangement by providing and fixing of 4 id and 6 id DI water supply pipeline in lieu of old existing of old existing brittledamaged water supply pipeline running through sewer chamber to avoid contamination of water supply from HNo48
2026_MCC_96539_1
MCPH3/2026/379
Open Tender
Public Health Estate Works
Percentage
20 days
Chandigarh
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹8,958
3 Nov 2026
3 Nov 2026
9 Nov 2026
3 Nov 2026
9 Nov 2026
3 Nov 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. (DSR No.2.8.1) | 46.8 | P.Cum | 185 | ₹8,658 |
| 2 | Providing and laying S & S Centrigally cast (Spun)/ Ductile iron pipes conforming to IS:8329:100mm dia Ductile iron class K-7 pipe as per DSR No. 18.72.1 Make ELECTRO STEEL/JINDAL/ TATA / Welspun | 25 | P. Mtr | 1,720 | ₹43,000 |
| 2.01 | Providing and laying S & S Centrigally cast (Spun)/ Ductile iron pipes conforming to IS:8329:150 mm dia Ductile Iron Class K-7 pipes (DSR No. 18.72.2) | 40 | P. Mtr | 2,400 | ₹96,000 |
| 3 | Providing push-on-joints to centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and the cost of rubber gasket. 100mm dia pipes (DSR item No.18.70.1) | 5 | P.Joint | 80 | ₹400 |
| 3.01 | Providing push-on-joints to centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and the cost of rubber gasket. 150mm dia pipes (DSR item No.18.70.2) | 7 | P.Joint | 130 | ₹910 |
| 4 | Labour for cutting C.I./D.I. pipe with steel saw. 100mm dia as per (DSR item No.18.83) | 2 | P.cut | 125 | ₹250 |
| 4.01 | Labour for cutting C.I./D.I. pipe with steel saw. 150 mm diameter pipe as per (DSR item No.18.83.4) | 3 | P.cut | 240 | ₹720 |
| 5 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50m and lift upto 1.5m ( DSR No.2.25) | 10.79 | P.cum | 135 | ₹1,456.65 |
| 6 | Carriage of materials by mechanical transport including loading ,unloading and stacking of earth upto 3km ( DSR No.1.1.2) | 36.01 | P.cum | 160 | ₹5,761.6 |
| 7 | Supplying and filling of fine sand Recycled Aggregate (RA) under floors including, watering, ramming consolidating and dressing complete. Inn all respects (sand will be taken from C&D waste plant wof M.C. (Based on DSR No. 2.27). (NSI) | 35.1 | P.cum | 635 | ₹22,288.5 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 19.54 MB
Tendernotice_2.pdf
PDF • 19.54 MB
BOQ_118787.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .