Loading
Loading…
Loading…
Tender Value
₹80.7 L
EMD Value
₹1.9 L
Closing Date
23 May 2024, 10:00 pmClosed
Directorate of Municipal Administration
k s patil
9972263001
Drilling Of Borewell And Repairs At Various Location Of North Constituency In Kalaburagi City.(Est.Amount Rs.96.00 Lakhs) (Catagory-Others)(15th FC-NMPC-2023-24)
DMA/2023-24/OW/WORK_INDENT15358/CALL-2
DMA/2023-24/OW/WORK_INDENT15358/CALL-2
Open
Other Works
Two Tender Document System(Two Cover)
DMA City Corporation Kalaburagi
7 documents required · 7 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
Satisfactorily completed, as prime contractor, at least one similar work such as Drilling of Borewell Workdone Certificate work of value not less than Rs. 48.00 Lakhs.
Executed in any one year the following minimum quantities of work
PWD Registration Certificate.
Achieved in at least two financial years an average financial turnover (in all classes of civil engineering construction works only) of Rs. 96.00 Lakhs
ESI & PF Registration Certificate to be Enclosed
Tender Bid Capacity The Bidder should upload the ongoing works in hand
Liquid assets and/or availability of credit facilities of no less than Rs. 28.80 Lakhs Credit lines/letter of credit/ certificates from the banks for meeting the fund requirement etc.( conditional Line of credit will be rejected)
₹2,020
₹1.9 L
16 May 2024
16 May 2024
24 May 2024
23 May 2024
Drilling Of Borewell And Repairs At Various Location Of North Constituency In Kalaburagi City.(Est.Amount Rs.96.00 Lakhs) (Catagory-Others)(15th FC-NMPC-2023-24)
Geophysical investigation at site for sinking borewells for Providing drinking water to the bitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or ...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth,including over burden upto 20M, fixing of casing pipes, coll...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth,including over burden upto 20M, fixing of casing pipes, coll...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth,including over burden upto 20M, fixing of casing pipes, coll...
PVC pipes of 6 Kg/cm2 for 200mm(6.233)SR 2023-24 Volume - V SL no.678 page no.A45) (200mm dia 6 Kg/cm2)
PVC pipes of 6 Kg/cm2 for 160mm(3.923)SR 2023-24 Volume - V SL no.678 page no.A45) (200mm dia 6 Kg/cm2)
PVC pipes of 6 Kg/cm2 for 140mm(3.097) SR 2023-24 Volume - V SL no.659 page no.A44) (140mm dia 6 Kg/cm2)
PVC pipes of 6 Kg/cm2 for 110mm(1.894)SR 2023-24 Volume - V SL no.677 page no.A45) (110mm dia 6 Kg/cm2)
Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incha...
Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary am...
Supply and delivery at site Accessories for Single Phase pumpset like SS Groove Nipples,SS Studs & Nuts,Screw Clips &water proof Insulation Tape etc complete with ISI mark SR WS&UGD 2023-24 Vol-5 It. ...
Providing and laying at site of work MS casing caps as per IS 1239 (partII) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum)....
Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. (1X3X4 ...
Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit.Common SR WS&UGD...
Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments. a.63mm (WS & UGD Works Vol V CSR for the 2023-2024 No....
Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments size 50mm (WS & UGD Works Vol V CSR for the 2023-2024 No. 13.25.1 ,P No-...
Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...
Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at t...
Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/2...
Polythylene pipes high density (HDPE) 40mm external dia (PRE WS DSR, Klb for 2019-20 P.No. 26 I.No. 0304).
Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...
Labour charges for Perforation & Erection of 140 and 110mm dia PVC Pipes (Rate approved by the Executive Engineer)
Labour charges for erection of outdoor type panel board and meter board units with all ecessary materials and labour, tools and equipments including providing cement concrete foundation bed etc., comp...
Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...
Cleaning of borewells including yield testing of borewell either using slow
or fast rigs for not more than 2 hours at the final depth with a minimum
working of 2 hours continuously with air compressor...
Borewell alignment work: for Borewell straightening and enlarging. ( Approved vide Division office, KUWS and D Board Ltr No : 1599 Dt: 17.09.2021)
Borewell cleaning work. Worked for shield, Bolders and cuttings cleaned by rotation method. (Approved vide Division Office, KUWS and D Board Ltr No. 1598 Dt: 17-09-2021)
Stones Removal work Worked for stones removed by crushing and cleaned by rotation method repeatedly (Approved vide Division Office KUWS and D Board Ltr No. 1598 Dt: 17-09-2021)
Removing of submersible pump set by fishing tool (Approved vide Division Office, KUWS and D Board Ltr No. 1599 Dt: 17-09-2021)
Removing of 32 mmdia GI pipe ( Approved vide Division office, KUWS and D Board Ltr No : 1599 Dt: 17.09.2021)
Removing of 32 mmdia GI pipe ( Approved vide Division office, KUWS and D Board Ltr No : 1599 Dt: 17.09.2021)
Providing and fixing M.S. grills of required pattern in frames of windows
etc. with M.S. flats, square or round bars etc. including priming coat with
approved steel primer all complete. Fixed to steel...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
kw-3 15358 (1).doc
Tender Document • 1.05 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].