Renovation of Existing JK House Allied Works Amritsar by way of Supply, Installation, Testing Commissioning of 40 KVA New DG Set, alongwith cabling, eartings and other allied works for Jammu and Kashmir House, Amritsar

Design, manufacture, supply, loading & unloading, erection, testing and commissioning of 415V, DG Set CPCB IV+ Emission Compliant with alternator complete with base frame, acoustic enclosure, all fittings and accessories as required/ as specified in the technical specification, including: >> Radiator >> Residential type silencer >> Anti-vibration mounts >> Battery and charger dynamo >> Engine instrumentation panel. >> Other accessories as required.

40 KVA capacity

Supply, installation, testing & commissioning of AMF Panel fabricated out of 14/16 gauge CRCA sheet and is powered coated for a coated for a weather-proof and long lasting finishwith, consisting of Contractors with HRC fuses, 100 A 4 pole MCCB with Over Load, Short Circuit & ELR protection for EB mains Alternator with Mnual and auto modes, BYPASS SWITCH, Multifunction Meter with current transformers displaying voltage, Current. Frequency, Water temperature, Oil Pressure, KVA, KW. Wall / Floor mounting by means of dash fasteners / Angle frame as per the on-site requirements & as directed and also including of double earthing of the panel with required GI/Cu wires from the nearest earthing point.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

63 mm dia (OD-63 mm & ID-51 mm nominal)

90 mm dia (OD-90 mm & ID-76 mm nominal)

Demolishing cement concrete / marble flooring / Road manually or by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Providing and laying cement concrerte mix for filling the demolished portion of cement concrete outdoor flooring Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Cutting of marble stone fixed in flooring and refixing back making it good.

Making holes on brick walls of 100 mm dia approximately for crossing pipes and making it good.

Supplying, laying and fixing of PVC insulated and PVC sheathed armored Al power cable of 1.1 KV grade of following size on wall surface/ cable tray/HDPE pipe.

4 Core 50 sq. mm

Supply, laying, testing & commissioning of 1.1 kV grade, armoured, PVC insulated multi core copper conductor LT control Cable including necessary cleats, clamps end connection and with gland & termination etc complete as required.

4 core x 4 Sq.mm

8 Core x 2.5 Sq.mm

Supplying and making indoor end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed aluminium conductor cable of 1.1 KV grade.

4 Core 50 sq. mm (35mm)

Supplying and making indoor end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed aluminium conductor cable of 1.1 KV grade.

4 core x 4 Sq.mm (19mm)

8 Core x 2.5 Sq.mm(19mm)

Providing and fixing / installation of M.S. Pipe 100 mm dia. for exhaust, make Jindal, including rock wool insulation and aluminum cladding complete.

Providing and fixing / installation of M.S. Pipe 125 mm dia. for exhaust, make Jindal, including rock wool insulation and aluminum cladding complete.

Fabrication and erection of vertical and other supports, clamps etc. for erection of exhaust pipe line, using M.S. Angles as required.

Fabrication and erection of supports, clamps etc. on wall at various heights for erection of vertical exhaust pipe line 100 / 125 mm, using M.S. Angles, flates, nuts and bolts etc. as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection / terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I.pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm GI strip on surface or in recess for connections etc. as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I.pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.

Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 meters and providing and laying in position reinforced cement concrete (RCC) in 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm /25mm nominal size) proportion in foundation of the required size for 125kVA DG set etc. including form work/ framing works as required and also including providing & laying necessary reinforcement and refilling after foundation concreting & plastering work, etc. complete. M25 grade of reinforced cement concrete by using 410 kg of cement per cu.m. of concrete. (approx. set size : 3.7mx1.4mx1.9m(h) (approx pedestal size :4.3m x 2.0m x 0.6m )

Disposal of Mulba/waste out side the Municipal limits by mechanical means

Please Enable Macros to View BoQ information