Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.5 LAccepted-AOC 21 JHAMRI 151 JHAMRI JHAMRI ROHTAK HARYANA 124142 UDYAM HR 07 0030314 | JHAJJAR | HARYANA | 124142 | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹24.0 L+₹1.4 L (6.41%)Rejected-AOC 13 P N DOGRA MARKET GOLE MARKET UDHAMPUR 182101 J K | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L2 | Rejected-AOC Rejected due to not being L1 | |
| 3 | L3₹25.5 L+₹2.9 L (12.9%)Rejected-AOC | L3 | Rejected-AOC Rejected due to not being L1 | |
| 4 | L4₹25.8 L+₹3.2 L (14.3%)Rejected-AOC | L4 | Rejected-AOC Rejected due to not being L1 |
Tender Value
Refer Docs
EMD Value
₹52,000
Closing Date
20 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH UDHAMPUR
GE NORTH UDHAMPUR
GE U(N) 43 2022 23 REPAIRS TO PLASTERING CHAJJA FACIA WELCOME PERODICAL MAINT SERVICES AND MISC REPAIR OF MEDICAL COMPLEX MUKHARJEE ENCLAVE FHO AND AMSD INCLUDING REPAIRMAINT OF CERTAIN EM REPAIR WORKS OF RR UNDER GE(N) UDHAMPUR
2022_MES_547115_1
GE/U(N)/43/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE NORTH UDHAMPUR
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE NORTH UDHAMPUR
₹52,000
Yes
6 Oct 2022
23 Aug 2022
22 Sept 2022
23 Aug 2022
20 Sept 2022
6 Sept 2022
Amount
M&L for dismantling loose/disintegrated portion of RCC chajjas, downward facia, bottom & sides of chajjas, roof projection, bends shelves, beams balconies and similar work at any position or any height and dubbing out with PCC 1:1.5:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished required shape including applying anti corrisove paint on exposed surfaced and provision of necessary support form work and including 10mm thick plastering in CM 1:4 finished fair and even and two coat of coat of exterior emulsion paint completed all as specifed. Note: Rate also included for necessary scaffolding etc required.
M&L for taking down chowkhats or frames of any type or description (without taking off shutters from frame) not exc 1.50 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed by the Engr-in-charge.
S & F powder coated (of approved colour ) aluminium sections as in frame & shutter of doors, windows (Hung/sliding), ventilators (louvers/fixed type) and fixed frame etc fixed to wall including, preparation of disturbed portion both side (internal & external surfaces of wall) match with existing surface treatment and all sides of aluminium frame shall be sealed with silicon sealent (inner/outer face) complete all as specified as directed by Engr-In-Charge. Note : The rates also includes for PVC roller & necessary locking arrangement required for sliding window/vents and nothing extra shall be paid for the same.
M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by the Engr-in-charge.
S & F Glazing with 4mm thick frosted/tinted sheet glass exc 0.50 sqm in each panel fixed to aluminium section of doors, windows and fixed frame with suitable EPDM rubber packing and powder coated aluminium beading to frame complete all as specified and directed by the Engr-in-charge.
M&L preparing painting on steel surfaces of any description over 10cm in width or girth, on new surface over a coat of red oxide zinc primer and two coat of synthetic enameled paint over it complete all as specified and directed by the Engr-in-charge.
S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed .
M&L for hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins or spring clips and providing and fixing new clips or pins complete all as specified and directed by the Engr-in-charge.
S&F sheet glass, ordinary quality 3mm thick and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed by the Engr-in-charge.
M&L for preparation of plastered or unplastered old surfaces of wall by scrapping down smoke soots, moulds, moss and efflorscent salt and trading oil and greasy spots etc, and applying one coat of white wash on wall surface,complete all as specified and directed by Engr-in charge .
M&L for preparation of plastered or unplastered old surfaces of ceiling by moulds, moss and efflorscent salt and trading oil and greasy spots etc, and applying one coat of white wash on ceiling surface complete all as specified and directed by Engr-in charge .
M&L for complete removal of existing treatment on old decorated surfaces of wall plasteres or unplastered by washing ,rubbing down and stopping of distempred and painted surfaces and applying two coats of oil bound distemper over a coat of primer on wall applying 2 to 3 mm thick of wall care putty complete all as specified and directed by Engr-in charge . Note Wall care putty shall be applyed in two coat and each coat shall be rubbed and smoothhen by suitable emery/sand paper .
M&L for preparation of plastered or unplastered old surfaces of walls, chajja, balcony,facia etc by brooming down or steel wire brushing, scraping down smoke soots ,moulds ,moss efforescent salts,treating oil and greasy spots etc, and applying one coat of cement base paint ,complete all as specified and directed by Engr-in charge .
M&L for preparation of plastered or unplastered old surfaces of walls, chajja, balcony,facia etc by brooming down or steel wire brushing, scraping down smoke soots ,moulds ,moss efforescent salls,treating oil and greasy spots etc, and applying one coat of exterior emulsion paint white or tinted complete all as specified and directed by Engr-in charge .
M&L for preparation of old painted wooden surfaces of any description exceeding 10 cms width or girth applying one coat of synthetic enamel paint over one coat of primer, complete all as specified.
M&L for preparation of old or previously painted steel or iron surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint,over one coat of primer complete all as specified.
M&L for taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15 mm thick cement plaster on fair face of brick work or concrete surfaces of wall cement mortar 1:4 in finishedand directed . even and smooth without using extra cement complete all as specified and directed by Engr-in Charge .
M&L for rendering 5 mm thick cement plaster on fair face of brick work or concrete surfaces of ceiling in cement mortar 1:3, finished even and smooth without using extra cement, complete all as specified and directed by Engr-in Charge .
M&L for rendering 10 mm thick cement plaster on fair face of brick work or concrete surfaces of wall in cement mortar 1:6, finished even and smooth without using extra cement, complete all as specified and directed by Engr-in Charge .
M&L for preparation of new plastered surfaces of wall and applying two coat of cement base paint over one coat of primer , complete all as specified and directed by Engr-in Charge .
M&L for preparation of new plastered surfaces of wall and applying two coat of oil bound distemper over one coat of primer over 2 to 3mm thick wall care putty , complete all as specified and directed by Engr-in Charge ..
M&L for preparation of new plastered surfaces of ceiling and applying three coat of white wash , complete all as specified and directed by Engr-in Charge .
M&L for disconnection of PVC water storage tank not exc 500 litre at roof/staging, getting aside for cleaning, lowering and hoisting, if required, cleaning and removing all scales and dirt etc from PVC tanks and from mouth of circulating pipes etc and washing with adequate qty of bleaching powder solution including removing of all vegetation in surrounding of the tanks and writing letters or figures (block Roman/Italik or Indian) not exceeding 30cm to write as cleaned on XX-XX-XX on each tank and writing stops,comma,short lines,dashes, hyphens,brackets complete all as specified and as directed
M&L for disconnection of PVC water storage tank exc 500 litre but not exc 1000litre at roof/staging, getting aside for cleaning, lowering and hoisting, if required, cleaning and removing all scales and dirt etc from PVC tanks and from mouth of circulating pipes etc and washing with adequate qty of bleaching powder solution including removing of all vegetation in surrounding of the tanks and writing letters or figures (block Roman/Italik or Indian) not exceeding 30cm to write as cleaned on XX-XX-XX on each tank and writing stops,comma,short lines,dashes, hyphens,brackets complete all as specified and as directed
M&L for dismantling water tanks and removing to store exc 250 litre but n exc 500 litre with all necessary fittings complete all as specified.
M&L for dismantling water tanks and removing to store exc 500 litre but n exc 1000 litre with all necessary fittings complete all as specified.
M&L for 3 layer rotational moulded polyethylene water storage tanks white colour 500 ltr Capacity white in colour (Cylindrical vertical with closed top) with 20 mm ball valve, epoxy coated aluminum rod, plastic ball etc, hoisted and fixed in position including tank Nipple inlet and outlet and conneting pipes all as specified in SSR Part I complete all as specified & as directed.
M&L for 3 layer rotational moulded polyethylene water storage tanks white colour 1000 ltr Capacity white in colour (Cylindrical vertical with closed top), with 20 mm ball valve, epoxy coated aluminum rod, plastic ball etc, hoisted and fixed in position including tank Nipple inlet and outlet and conneting pipes all as specified in SSR Part I complete all as specified & as directed.
M&L for taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends swan necks, etc, including cleaning or refixing or removal to store complete all as specified and directed by the Engr-in-charge. (measured overall as fixed along the centre line over fitting and accessories).
S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor with MS clamps, all as specified and directed by the Engr-in-charge.
S&F PVC (SWR) pipes of bore 75mm single socketed in any length with rubber ring joints fixed to walls/floor with stack clapms and fixed with nut and bolts complete all as specified and directed by the Engr-in-charge.
S&F110 mm bore PVC (SWR) bends with access door any radius, complete all as specified and directed by the Engr-in-charge.
S&F PVC (SWR) bends with access door any radius of bore 75 mm complete all as specified and directed by the Engr-in-charge.
M&L for demolition of cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed by the Engr-in-charge.
M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 40mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed by the Engr-in-charge.
M&L for demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided, complete all as specified and as directed by the Engr-in-charge.
M&L for mild steel TMT bars 10 mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed by the Engr-in-charge.
M&L for RCC Design mix M25 Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by the Engr-in-charge.
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed by the Engr-in-charge.
M & L for black granite(of any type)stone slab 18 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing with rounding to edges of stone slabs one edg complete Including 10mm thick backing coat CM 1:4 complete all as specified and as directed by Engr-in-Charge.
M & L for demolition of brick work or stone masonry built in cement mortar including all quoines arches,pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles complete all as specified and as directed by Engr-in-charge
M&L for brick work with sub class 'B' bricks, straight or curved on plan, exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified.
S&F looking Mirror of size 600mm X 450mm X 5mm thick with Plywoof commercial type fixed on back side and wooden frame compete all as specifed.
M & L for taking down chowkhats or frames (without taking off shutters from frame) exc 1.50 Sqm and not exc 4.00 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed by the Engr-in-charge.
S&F pressed steel frames, size 125 mm x 60 mm. for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, 1:2:4, type B-0 using 12.5 mm graded crushed stone aggregates filling inside hollow section etc complete all as specified and directed by the Engr-in-charge.
S&F Plain framed, panelled shutter 35mm thick 2nd class hard wood (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by the Engr-in-charge.
S&F 35 mm thick 2nd Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by the Engr-in-charge.
Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed by the Engr-in-charge.
S&F MS helical door spring 150mm size including roller and roller plate fixed to wooden or steel frames with welding etc complete all as specified and directed by the Engr-in-charge.
S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed by the Engr-in-charge.
S&F 100mm long Steel Butt hinges, heavy weight, cold rolled and fixed complete all as specified and directed by the Engr-in-charge.
S&F 150 mm long aluminium handles, cast type, anodised and fixed complete all as specified and directed by the Engr-in-charge.
S&F 150mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by the Engr-in-charge.
S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube in opening as per complete all as specified and directed by the Engr-in-charge.
S&F factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face supplying & fixing in frame at site as per specification & drawing complete all as specified and directed by the Engr-in-charge.
M&L for dismantling floor , hearth or wall tiling including cement mortar bedding ( but not backing ), removing and rubbish off the premises complete all as specified and directed by Engr-in charge.
M & L for non skid ceramic coloured tiles of 7 to 8 mm thick (Square/rectangular) area of each tile exceeding .11sqm but n,exc .18sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including 10mm thick screed bed in CM 1:4 complete all as specified and directed by Engr-in charge.
M & L for Coloured glazed ceramic coloured tiles 600 mm x 300 mm x 8 to 10mm thick on vertical surfaces of walls as in dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:3 and fair to recive tiles as in skirting/dado etc complete all as specified and directed by Engr-in charge.
S & F in replacement WC (Squatt pattern ) including cement concrete bedding , size 580 x 440mm including PVC 'P or s trap front and back inlet and with internal foot rests (excluding flushing cistern ) including flush pipe and connector pices of PVC and removed old CI Pipe including demolition of PCC uptp 450mm depthcomplete all as specified and directed by Engr-in charge.
S & F in replacement Wash down water closet (Pedestal pattern), complete with Pedestal pan and P trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc.including PVC Seat and cover for pedestal pan and CP Jet alongwith flexible tube/pipecomplete all as specified and directed by Engr-in charge.
S&F in replacement PVC low level flushing cistern of capacity 10 ltr. white with inlet, ball valve, float and handle including breckets, flush pipe of polyethylene of low or high density or PVC 32mm dia and connection to pipes complete all as specified and directed by Engr-in charge.
S&F in replacement wash basins, vitreous china(flat back or angle back type) size 550 X 400mm, including cutting for and pinning in ends of brackets or erecting stand including CP waste coupling 32mm and pvc waste pipe 32mm borecomplete all as specified and directed by Engr-in charge.
S&F in replacement for chromium plated, 15mm Swan Neck pillar cock, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixedcomplete all as specified and directed by Engr-in charge.
S&F in repairs PVC connection 15mm size with PTMT nuts of length 600mm. complete all as specified and directed by Engr-in charge.
S&F jets of EWC's with required size of jet pipe (flexible) and connections etc complete all as specified and directed by Engr-in charge.
M & L for taking up or down steel tubing and connections, including cleaning for refixing or removal from site to store bore of pipe 15mm complete all as specified and directed by Engr-in charge.
M & L for taking up or down steel tubing and connections, including cleaning for refixing or removal from site to store bore of pipe 20mm complete all as specified and directed by Engr-in charge.
S&F tubes , medium grade of bore size 15 mm including all fixing accerroies and laid in ceilings or laid in floors complete all as specified and directed by the Engr-in-charge.
S&F tubes , medium grade of bore size 20 mm including all fixing accerroies and laid in ceilings or laid in floors complete all as specified and directed by the Engr-in-charge.
S&F in replacement bib taps long body 15mm chroimum plated (ISI Marked with valid CML No) with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed including elbow/socket etc as required at site complete all as specified and directed by the Engr-in-charge.
S&F in repair CP shower with arm 15mm size 195mm long with bend of 45 degree with flange including taking down the existing UNSV shower of any type/shape complete all as specified and directed by the Engr-in-charge.
S&F in replacemetnt angle cock 15mm chromium plated fittin as required at site and taking down existing unserviceable angle cock complete all as specified and directed by the Engr-in-charge.
S&F in replacement stop valve Concealed type long shank chromium plated brass fancy screwed down high pressure with crutch or butterfly handle dia 15mm screwed both ends for iron pipe or for unions and fixed including fittings as required at site,complete all as specified and directed by the Engr-in-charge.
S&F 75 mm bore PVC(SWR) floor trap with stainless steel grating including jointing to waste pipe fixed in cement with solvent cement, including taking down old PVC or CI floor trap of any typecomplete all as specified and directed by the Engr-in-charge.
S&F in repair PVC flexible waste pipe for wash basin /sink complete all as specified and directed by the Engr-in-charge.
M&L for plain cement concrete 50mm thick (1:2:4) type B-2 using 40mm graded stone aggregate as in floorcomplete all as specified and directed by the Engr-in-charge.
M&L preparation of new wood Surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed by the Engr-in-charge.
S& F 22mm MS dark brown powder coated curtain rod with end brackets and side brackets with designer end pieces fixed with screw and plugs as per directedcomplete all as specified and directed by the Engr-in-charge.
Supply only integral water proofing compound complete all as specified and directed by the Engr-in-charge.
Taking down carefully the existing Copper/Aluminium point wiring of any size and type by disconnecting from the either terminals complete with switches, sockets, ceiling rose, regulators, bell etc by unscrewing and removing materials to store for keeping in safe custody for re-use or for taking credit and making good to disturb surface of walls, floors etc., complete all as specified and directed by Engr -in- charge. Note : (i) Old dismanteled wiring and accessories (other than reuse) will be contractors property and credit will be charged against schedule of credit.
Taking down carefully by unscrewing from boards / outlet boxes fittings and fixture such as, LED bulk head fitting, LED tube light fitting etc. for re use at site or carrying to the store (serviceable fitting shall be reuse) all as specified and as directed by Engr-in charge.
Taking down Old Serviceable/ unserviceable MCB DB any type/size etc after disconnecting (serviceable DBs /MCBs shall be reuse), complete all as specified and directed by Engr-in charge.
M&L for Point wiring for One light/fan/exhaust fan point controlled by one one way switch 5 Amp with 1.5 Sqmm single core multi standed copper conductor FRLSH insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLSH insulated drawn into and including concealed PVC rigid conduit of not less than 20mm dia ISI marked terminated into annealed steel terminal boxes including 3.00 mm thick hylam brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc complete all as specified and directed by the Engr-in-charge.
All as per item No. 84 above but for bell / buzzer on independent board controlled by one push button bell switch.
All as per item No. 84 above but for one 5 Amps socket outlet on independent board.
All as per item Srl No. 84 herein before but for 3 pin socket outlet 5 Amp on same board, complete all as specified and directed by Engr -in-charge.
All as per item No. 84 above but controle by 2 Nos.of two way switch.
All as per item No. 84 bove but wire size 2x2.5 Sqmm to controlled the 3 pin 5 / 15 Amps socket outlet on independent board and providing earth continuity wire using PVC insulated, FRLSH 1100 volts grade un sheathed single core stranded copper conductor cable of size 2.5 Sqmm.
S&F Switch Piano flush type single pole 5 Amps One way, all as specified and directed by Engineer- in - Charge.
S&F Switch Piano flush type single pole two way 5 Amps, all as specified and directed by Engineer- in - Charge.
S&F Socket outlet Two in one, 3/5 Pin piano type 5 Amp flush type complete all as specified and directed by Engineer- in - Charge.
S&F Switch socket combination piano type 5 pin 5 Amps flush type fixed in replacement, complete all as specified and directed by Engineer- in - Charge.
S&F Switch socket combination piano type 6 pin 16 Amps flush type fixed in replacement, complete all as specified and directed by Engineer- in - Charge.
S&F Ceiling rose, 3 terminal, PVC / polycarbonet, isolated body complete all as specified and directed by Engineer - in - Charge.
S&F Electric bell (Ding dong) AC 230/250 volts grade single pole ISI marked, complete all as specified and as directed by Engr-in charge.
S&F switch piano flush type for bell Push 5 Amps, complete all as specified and directed by Engineer- in - Charge.
S&F Electronic type fan regulator Stepped type, 240Volt flush type suitable for 1200/1400mm sweep ceiling fan, ISI marked complete all as specified and directed by Engineer- in - Charge.
Re-fixing serviceable light fittings any type as obtained against item No 2 all as specified and directed by Engr-in charge.
Taking down fan, ceiling cable end, dismantling blades and kept in safe custody for refixing on same location all as specified and directed by Engr-in charge.
Hanging /fixing only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan obtained from item no 100 above all as specified and directed by Engr-in charge.
M&L for cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed conduit wiring, etc, and making good, cutting not exc 10 cm girth all as specified and directed by Engr-in charge.
M&L for sub main wiring with two run single core 6 sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100V grade including 25mm dia PVC concealed conduit medium grade ISI marked with all accessories such as Tees, elbows, junctgion boxes etc, as required fixed on wall alongwith one run of 6 sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continious earth wire and connecting to existing main switch board/distribution board complete including taking down unserviceable submain of any type/size and testing on completion etc fixed in replacement, complete all as specified and directed by Engr-in charge. Note : Two run of 6 sqmm and one run 6 sqmm cable and one run of PVC conduit shall be measured as one RM
All as per item No. 103 here in before but with 4 sqmm pvc copper conductor cable through pvc conduit ISI marked with 4 sqmm copper conductor cable as earth contiunity conductor.
All as per item No. 103 here in before but with 1.5 sqmm pvc copper conductor cable through pvc conduit ISI marked with 1.5 sqmm copper conductor cable as earth contiunity conductor.
All as per item No. 103 here in before but with 2.5 sqmm pvc copper conductor cable through pvc conduit ISI marked with 2.5 sqmm copper conductor cable as earth contiunity conductor.
M & L for sub main wiring with two run single core 4 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 25 mm dia PVC surface conduit/PVC casing caping medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete all as directed. Note: Two runs of 4sqmm and one run of 4 sqmm cable and one run of PVC conduit/ casing capping shall be measured as one RM
All as per item No. 107 here in before but with 6 sqmm pvc copper conductor cable through pvc conduit ISI marked with 6 sqmm copper conductor cable as earth contiunity conductor.
All as per item No. 107 here in before but with 2.5 sqmm pvc copper conductor cable through pvc conduit ISI marked with 2.5 sqmm copper conductor cable as earth contiunity conductor complete all as specified and directed by Engineer- in - Charge.
S&F Switch Piano flush type single pole 5 Amps one way fixed in replacement, complete all as specified and directed by Engineer- in - Charge.
S&F Socket outlet Two in one, 3/5 Pin piano type 5 Amp flush type fixed in replacement, complete all as specified and directed by Engineer- in - Charge.
S&F Socket outlet Two in one, 3/5 Pin piano type 5 Amp and 15 Amp flush type fixed in replacement, complete all as specified and directed by Engineer- in - Charge.
S&F Switch Piano type single pole 16/20 Amps One way, fixed in replacement, complete all as specified and directed by Engineer- in - Charge.
S&F Switch socket combination piano type 5 pin 5 Amps flush type fixed in replacement, complete all as specified and directed by Engineer- in - Charge.
S&F Switch socket combination piano type 6 pin 16 Amps flush type fixed in replacement, complete all as specified and directed by Engineer- in - Charge.
S&F Electronic type fan regulator Stepped type, 240Volt flush type suitable for 1200/1400mm sweep ceiling fan, ISI marked fixed in replacement, complete all as specified and directed by Engineer- in - Charge.
S&F Electric bell(Ding dong) AC 230/250 volts grade single pole ISI marked fixed in replacement, complete all as specified and as directed by Engr-in charge.
S&F Switch socket combination Box type 5 pin 5 Amps flush type fixed in replacement, complete all as specified and directed by Engineer- in - Charge.
S&F Switch socket combination Box type 6 pin 16 Amps flush type fixed in replacement, complete all as specified and directed by Engineer- in - Charge.
Fixing only serviceable MCB DB of any type and capacity obtained from Item No 03 complete all as specified and directed by Engr-in charge.
S&F in replacement single pole and neutral sheet steel powder coated distribution board for MCBs fitted with bus bar neutral link Earth bar and din rail suitable for use on 240V, 50Hz supply double door SPN DB system 8 Way all as specified and directed by Engr-in charge.
All as per srl item No 121 above but 4 way, complete all as specified and directed by the Engr-in-Charge.
All as per srl item No 121 above but 12 way, complete all as specified and directed by the Engr-in-Charge.
S&F in repair sheet metal enclosure VTPN 4 way 415 volt 250 Amp rated bus bar double door type,mechanical impact strength IK09 with suitable for mounting MCCB for incomer and MCBs for outing without MCCB and MCB, IP-43 protection grade fixed flush to wall complete including cable connections should be provide with necessary reducer lugs complete all as directed by Engr-in-Charge.
S &F MCCB 4 pole, 415 volt, Adjustable type 160 Amp with breaking capacity 16 KA complete all as specified and directed by the Engr-in-Charge.
S&F connection and testing 'C' series SPN MCB 40 to 63 Amp 240V, 50Hz, 10kA for lighting and other domesitc loads incl necessary copper lugs etc all as specified and as directed by Engr-in charge.
Supply and fixing, connection and testing 'C' series MCB SP6-32 Amps complete all as specified and directed by the Engr-in-Charge.
Supply and fixing connection and testing 'C' series MCB SP 40 Amps.
Fixing only serviceable MCB SPN/SP any capacity obtained from item no 03 as above all as specified and as directed by Engr-in charge.
S&F for Isolator 4 Pole 100 Amp, 415 Volts- complete all as specified and directed by the Engr-in-Charge.
M & L for replacement of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps 240 volt capacity complete all as directed.
S&F MCB TPN 63 Amps four pole 415V incl all termnials, fitting etc complete all as specified and directed by the Engr-in-Charge.
S&F Slim linear LED lighting fixture 4/5W watt LED batten, with full base of extruded poly carbonate isolated driver, complete making all connection from ceiling rose to fittings including testing complete all as per the direction of Engr-in-Charge. Make of LED -Syska Cat No:SSK-SQ0401/Wipro Cat No : D530565/C&S Cat No: LTTBIF5WLED/W/ Havells: Cat No: LHEXBXPNIN1W005
S&F decorative ultra slim linear polycarbonate Extruded LED lighting fixture 10/12 Watt LED of input voltage AC 220V-240V, 50 Hz with colour tempetrature 6500K more than 1080 lumens of IP 20 complete making all connection using 1.5 sqmm copper conductor multistranded PVC insulated twin core flexible cable from ceilingrose to fitting complete all as per directed by Engr-in-charge. Make Syska Cat No: SSK-SQ1201 Wipro Cat No : D531065/Havells: Cat No: LUMILINEPLUSBS10WLED865SPCSS/ Philips Cat No : BN 021 LED10S- 6500 PSU GR S1
S&F Slim linear LED lighting fixture 20 Watt LED batten, P.F greater than 0.9, input voltage range from 90 Volts to 280Volts with full base of polycarbonate extruded section acting as a heat sink with closed back isolated driver complete making all connection using 1.5sqmm copper conductor multistranded PVC insulated 2 core flexible cable with from ceiling rose to fitting complete all as specified and as directed by Engr-in charge. Make Make : Syska Cat No: SSK-SQ2001/Havells Cat No: LHEXBXPNIN1W020/ or equivallent to Wipro
Supply and fixing LED Bulk head (6500K) fitting of 09/10 Watt surface mounting type extruded aluminium body with diffuser complete with testing all as specified and directed by Engr-in charge. Make Syska Cat No: SSK-BH-9W /Wipro Cat No : DA11265/Crompton :Cat No: LBHE-10-DL /Havells: Cat No: RUGBYNEONFT10WLED860SSYMTOPC
S&F in replacement ultra modern designed aechitectural 2x2 LED, 6500K, 42 watt luminaire which provides soft light and glare free symmetrical illumination (VENUS NEO), complete all as per the direction of Engr-in-Charge.
Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by the Engr-in-Charge.
M&L Earthing complete with galvanised steel earth plate electrode 60x60cmx6mm thick, buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No-3 of MES Part-1 fixed in replacement including testing on completion including the material and labour of the following :- (a) Excavation and earth work for drilling hole for electrode in any type of soil. (b) PCC Pit in cement concrete 1:2:4 type B-1. (c) Precast RCC cover with suitable handle 40mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than 1.87 Kg/Sqm. (d) Funnel with watering pipe of GI protection pipe 5 mtr long for protection of earthing lead from mechanical injury or tempering. (f) Requisite quantity of common salt and charcoal. (g) Testing of Earthing. Note : (a) On testing after completion of earthing, if the desired earth resistnace is not obtained, the earthing will be done by the contractor at his own risk and cost to the entire satisfaction ot the engineer incharge. (b) The contractor shall quote his rate considering taking down cost of existing unserviceable earthing.
VARDHMAN INTERNATIONAL
M/S SHREE RAM DUBEY AND SONS
MADAN LAL SHARMA AND SONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .