REPAIR/MAINT OF OLD DI PIPES, GI PIPES AT OFFRS QTRS/ JCO QTRS AT DRONACHAL TOP BHOPAL.

Amount

Material and labour of Run lead joints in repair including extracting old lead while removing the old joint to the following size bore of water Supply Lines with spigot & socket ends including necessary earth work excavation in soft loose soil up to 1.5 mtr width and 1.5mtr depth returning and filling and well ramming including watering as required. Removal of surplus soil complete all as specified and directed by Engr-in-Charge. (i) This item is applicable where independent leaked joints to be repaired. (ii) Old retrieved lead may be used by the contractor under this item. Additional lead as required shall be arranged by the contractor. (iii) Excavation, earth work shall be measured and paid seperately under relevant item

80 mm bore

100 mm bore

150 mm bore

200 mm bore

250 mm bore

Supply and fix chlorine test kit for testing of potable drinking water complete all as specified and directed by Engr-in-Charge.

M&L for flange joint with rubber or fibre board gasket (rubber flange gasket) conf to revelent IS, ISI marked of following size:-

80 mm bore

100 mm bore

150 mm bore

200 mm bore

250 mm bore

Excavation in trenches not exc 1.5 metre wide & not exc 1.5 mtr in depth: for foundationetc or for manholes, laying of pipe in hard dense soil and getting out complete all as specified and directed by Engr-in-Charge.

Returning filling in, including spreading, leveling watering & well rammng in layers not exc 25cm thick complete all as specified and directed by Engr-in-Charge.

Removing excavated material to a distance not exc 50 mtr & depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed by Engr-in-Charge.

Taking up/out cast iron water mains including all fittings with spigot and socketed ends or flanged ends including burning out lead joints or dismantling flanged joints for pipe of following sizes bore complete all as specified and directed. Note: (i) Excavation and earth work shall be measured and paid separately. (ii) Lead joints shall be burnt out carefully so as to recover the old lead maximum for reuse.

80 mm bore

100 mm bore

150 mm bore

Laying, jointing and testing serviceable cast iron water pipes with flanged end or spigot and socketed ends as retrieved vide item No 4 above in any length including cleaning, cutting for reducing length as required, jointing as in trenches for following size bore in new or old locations. (Excavation, earth work, joints, threading & CI specials shall be measured and paid separately).

80 mm bore

100 mm bore

150 mm bore

Material & labour for laying, jointing and testing cast iron water pipes with spigot and socketed ends centrifugally cast, class LA conforming to IS, in any length, jointing with lead joints, as in trenches of of following sizes bore in new or old locations. Note:-(Excavation, earth work, joints & CI specials shall be measured and paid separately).

80 mm bore

100 mm bore

150 mm bore

Materials and labour for drilling & tapping CI/DI/GI water mains of any size (in position) for branch connection of the internal dia of size upto 50 mm including supply and fixing plain brass ferrules screwed both end 50mm bore and necessary earth work complete all as specified and directed by Engr-in-charge.

Taking up or down steel water tubing / thin walled Flexible Quite coupling galvanised steel ZRW/HFW pipe Type 'B' 1.6 mm thickness of wall/ PVC pipes of following bore from trenches/floors/ walls etc. incl including cleaning for refixing or removal of store complete all as directed. Note:-(Excavation and earth work shall be measured and paid separately)

80 mm bore GI pipe

50 mm bore GI pipe

40 mm bore GI Pipe

25 mm bore GI pipe

20 mm bore GI pipe

15 mm bore GI pipe

Refixing of old steel tubing and connections in new or old position including cleaning internally and externally, any grade/make in trenches/wall/floor/ceiling including all type of new fittings i.e. sockets, Tee union elbow etc all as specified and directed of follwing size:-

80 mm bore GI pipe

50 mm bore GI pipe

40 mm bore GI Pipe

25 mm bore GI pipe

20 mm bore GI pipe

15 mm bore GI pipe

Supply , fixing & laying GI tubing medium grade with one socket both end threaded in any length including cutting threading connection in new or old position and all type of GI new fittings for laid in trenches/walls/floors all as specified and directed of following size:-

80 mm bore GI pipe medium grade

50 mm bore GI pipe medium grade

40 mm bore GI Pipe medium grade

25 mm bore GI pipe medium grade

20 mm bore GI pipe medium grade

15 mm bore GI pipe medium grade

Supply testing and commissioning of gun metal globe or gate valves ISI marked with iron wheel head, screwed both ends for iron pipe of following size bore complete fixed as in repairs. Make: Sant / Leader / Kiran / L&T / Kirloskar Note: In case of short length, GI fittings i.e Nipples / Union sockets etc. required to fix the valve will be provided by contractor, the rate deemed to be included in the unit rate quoted against this item.for following size:-

50 mm bore

40 mm bore

25 mm bore

20 mm bore

Cutting of cast iron pipes and reducing in required length before laying in position for insertion of new valves,tees,branches etc. For following size. Note CI Fittings measured shall be measured and paid seperately

80 mm bore

100 mm bore

150 mm bore

Cast iron fittings of size upto 300 mm bore for spigot and socketed pipes e.g. Bends (any type, radius and angle). Tapers any type (Straight, end, increasing, decreasing or double socket etc). Tee pieces single branch, 'Y' junctions double branches, crosses (all sockets or socket and spigot) collars caps and plugs conforming to Is complete all as specified and directed. (Excavation, earth work, joints & jointing materia shall be measured and paid separately.

M&L for PCC 1:3:6 for Cement concrete in foundations, filling and mass-concrete as directed by Engr in charge.

Supply and replace existing unserviceable sluice valve with new cast iron flanged sluice valve of class PN1.6 ISI marked (IS-14846) with stainless steel spindle and hand wheel including fixing in existing/new position by providing new nut bolts, fibre board gasket etc complete all as specified and directed by Engineer-in-Charge.

80 mm dia sluice valve

150 mm bore sluice valve

Cutting of road / PCC path upto the depth of pipes and making good the disturbed surface with PCC 1:2:4 (20mm aggregate) using extra cement including earth work complete all as specified and directed

S&F ductile iron heavy duty mechanical joint, coller (Ktype) including followers glands tyton ring etc complete set confirming to IS 9523-2000 including burning out lead joints recover in lead and relaying after insertion of mechanical joint in safe condition for the following sizes :-

250 mm bore

150 mm bore

100 mm bore

Supply and fix ball valves, Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe , flynut (accessories) complete including necessary elbow, socket & nipple complete all as specified and directed suitable for following sizes :-

20 mm bore dia

25 mm bore dia

S&F in repairs the submersible cable flexible flat of size 16 sq mm, 3 core 1100 volts grading complete all as specified and directed.

Supply and Laying high density polyethylene pipes (HDPE) of 50 mm dia including connecting accessories complete all as specified and as directed.

Supply and replace existing unserviceable air valve with new cast iron double ball air release valve conforming to IS 14845 marked all as specified and directed of following size:-

250 mm bore

200 mm bore

M&L for cleaning area around of 2 mtr in radius by cutting of bushes and scratching out old bubbled paint, finishing the surface and painting two coats of black/blue/green synthetic enamele paint of 1st quality on CI/DI pipe line of 200/250mm dia on exposed rising main and delivery line of water supply from sewage pump house to reservoir at water pump house near HQ 21 Corps Adm bldg and other locations complete all as directed by Engr-in-charge.

Trimming/Cuting of bushes and grass of Pump houses /Substations/MES Installations and surrounding of OH/water reservoir piller boxes at various location and dumping/staging at 50 mtr away from existing point all as specified and directed.

S&F in repairs the submersible cable flexible flat of size 6 sq mm, 3 core 1100 volts grading complete all as specified and directed.

Supply and fix indicator lamp LED type R,Y,B 230 Volt complete for DOL/Star Delta Starter

Supply and fix float switch complete for DOL/Star Delta Starter

Supply and fix push button red/green complete for DOL/Star Delta Starter

Supply and fix control Relay (Auxiliary Contactors) AC 15 , 5A ,415 Volts (2NO+2NC) including electrical connection complete.

Supply and fix overload relay 14-23 Amps directe operated complete Make L&T cat part No SS94135OODO or equivalent in Legrand

Supply and fix Current transformer (CT) 60/5 Amps , class 1 accuracy ,15VA burden. Make: L&T /AE/Kappa/Rishabhset)

M&L for ductile iron pipes S/S including specials, Class “K-7” ,100 mm (4”) dia, in any length, laid in treanches including taking down old cast iron pipe

M&L for ductile iron pipes S/S including specials, Class “K-7” ,150 mm (6”) dia, in any length, laid in treanches including taking down old cast iron pipe

M&L for ductile iron pipes S/S including specials, Class “K-7” ,200 mm (8”) dia, in any length, laid in treanches including taking down old cast iron pipe

M&L for ductile iron pipes S/S including specials, Class “K-7” ,250 mm (10”) dia, in any length, laid in treanches including taking down old cast iron pipe

RAJPATI CONSTRUCTION

MODI CORPORATION

PRAGATI ELECTRICALS AND ELECTRONICS