Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.8 LAccepted-AOC RZ 55 1ST FLOOR MOHAN NAGAR PANKHA ROAD NEW DELHI 110046 | NEW DELHI | NEW DELHI | DELHI | 110046 | L1 | Accepted-AOC Awarded | |
| 2 | L2₹16.0 L+₹3.0 L (23.4%)Rejected-Finance | L2 | Rejected-Finance Rejected | |
| 3 | L3₹17.7 L+₹4.8 L (36.8%)Rejected-Finance | L3 | Rejected-Finance Rejected | |
| 4 | L4₹18.4 L+₹5.5 L (42.5%)Rejected-Finance | L4 | Rejected-Finance Rejected | |
| 5 | L5₹18.5 L+₹5.6 L (43.0%)Rejected-Finance | L5 | Rejected-Finance Rejected |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
17 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Subroto Park
GE (AF) Subroto Park c o 56 APO
CERTAIN REPAIR OF MES INSTALLATION AREA UNDER AGE B/R I OF GE (AF) SUBROTO PARK
2022_MES_552583_1
GE/SP/ TOKEN-41/2022-23
Open Tender
Civil Works
Item Rate
120 days
Subroto Park Delhi Cantt
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
GE (AF) Subroto Park
₹40,000
Yes
17 Nov 2022
17 Sept 2022
24 Oct 2022
17 Sept 2022
17 Oct 2022
4 Oct 2022
Amount
Demolition of any type of roof treament (i.e App membrance, brick tiles, mud phuska, cement concrete/ lime concrete etc ) from roof any thickness including leaping plaster including removing the demolished material from roof out side defence land complete all as specified and directed.
M & L for cement concrete 1 : 2 : 4 type B-0 (using 12.5 mm graded stone aggregate) laid as in padding 50mm thick average over roof slabs for providing proper slope including finishing surface even and smooth without unsing extra cement with water proofing compound by weight of cement complete all as specified. Note : WPC will be measured and paid separately.
M&L for three layer prefabricated atactic polypropylene polymer (APP) modified 3 mm thick membrane ( weight not less 3 kg/sqm) reinforced with 160 gms polester non-woven fabric with scratched tool before finishing roof surface. When the concrete surface is still green, the roof surface shall be throughly wire brushed washed dried up and cleaned of all foreign matter and dust prior to the application of primer on the dried surface one coat of approved bituminous primer, having density in the range of 0.87 to 0.89 / kg at 25 dgree and viscositing of 70 to 160 CPS manufactured by the same manufacturer @ 0.40 litres/sqm shall be applied. APP membrane shall be laid on primed surface tourch application mehtod after allowing 24 hours of primer to dry. Laying of APP membrane shall be commneced at the lowest level and worked upto the crest.APP membrane will normally be laid in length at right angle to the direction of slope. The overlaps shall be of minimum 100 mm on longitudinal direction and 150mm on the transverse direction. All overlaps shall be bonded with bitumen primer and levelled by the heating the overlaps with brutane tourch. This treatment shall be done by the approved authorised applicator complete all as specified and directed. Note:- Guarantee of treatment shal be for 10 years. Thereafter APP membrane shall be painting with two coat of water proofing paint with aluminium finish. (ii) Independent testing of membrane for the approval technical parameters specified hereinafter shall be carried out the approved laboratories like National test house and any other Govt approved laboratory having facilities for the testing of membrane.
Disconnecting existing tanks exc 250 and n.exc 500 ltrs and above, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.
Taking up or down 15 mm bore steel tubing and connections including cleaning for refixing with all fittings for GI tubing complete all as specified and directed.
M & L for 15mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
M&L for dismantling loose concrete cover of RCC slab, ceiling , columns, beams,chajja, balconies, staircase and as direceted, roughening and cleaning concrete surfaces with steel wire brushes, removing of rust from existing steel surfaces with rust removers of SIKKA restoff 100 applied two coast @0.15kg/Sqm per coat of steel surface and cleaning all rust with steel wire brush and washed with water and allowed to dry incl S&F welded fabric GI wire mesh or wire , size not less than 75 x 75 mm and 3 mm dia as reinforcement to concrete. After placing the additional re-inforcement, all concrete surfaces shall be throughly scurbbed with brushes, washed with water and allowed to dry to this surface , apply chenmical policrete admixture at the rate not less than 2% by weight of cement and providing minimum 30 mm thick (average thickness) guniting mix (using 1 part of oridinary poartland cement 53 grade and 2 parts of ghaggar sand mixed with adhesive/admixture at the rate as directed) with a pressure of 2.2 to 2.5 kg per sqm by guniting machine and surfaces finished even and fair including necessary padding, shuttering form work etc and finally applying 5 mm thick cement plaster in CM 1:3 complete all as specified and directed . Note :- Wherever steel reinforcement required will be measured & paid seprately.
Taking down cement or cement lime plaster of any description on brick / stone or concrete surfaces etc including raking out joints, hacking for key , scrubbing down with water etc complete all as specified and directed.
M&L for 15 mm thick cement plaster in cement mortar 1:4 on concrete or brick surface and finished even and smooth w/o using extra cement upto 4 storeys building mixing with water proofing compound as per manufacturer's instructions complete all as specified and directed.
M&L for 12 mm thick cement plaster in cement mortar 1:6 on uneven surface of brick work and finished even and smooth without using extra cement complete all as specified & directed.
M&L for 10 mm thick cement plaster in cement mortar 1:3 on concrete or brick surface and finished even and smooth w/o using extra cement as in ceiling complete all as specified and directed
M&L for preparing surfaces of new plaster on walls and applying two coats of cement base paint Over a coat of alkali resitant primer complete all as specified & directed.
M&L for preparation of new surface and applying two coat of white wash on ceiling complete all as specified & directed.
M&L for preparation of new surface and applying two coat of distemper on wall complete all as specified and directed.
Supply only Liquid water proofing compound complete all as specified and as directed .
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and 20mm thick screed bed in cm 1:4 including dismantling of stone slabs complete all as specified & directed.
Taking down PVC SWR pipes 110 mm or 75mm mm bore complete all as specified & directed.
S&F PVC (SWR) pipes 110 mm single socketed, in any length with solvent cement joints fixed to walls/laid in floors incl stack clamps of stainless steel with bolts & nuts etc complete all as specified & directed.
S&F in repair PVC SWR bends 110 mm dia complete all as specified & directed.
Demolition of cement concrete (unreinforced ) of any description and in any position not other wise specifically provided complete all as specified & directed.
M&L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection, path/hardstanding/subbase etc complete all as specified and directed .
M&L coloured chequered cement concrete tiles with white cement and pigment 20cm x 20cm x 25mm thick/25cm x 25cm x 25mm/30cm x 30cm x 25mm , set, jointed and pointed in neat cement slurry incl 15mm thick Screed bed or bedding layer of cement mortar 1:4 for laying tiles all as specified and directed.
M & L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment laid and bedded on sand cushioning complete all as specified and directed.
M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified & directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed
M&L for PCC 1:2:4 type B-1using (20mm graded stone aggregate), 25mm thick as in sub base to the tile flooring complete all as specified and directed.
M&L non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exc 0.11 sqm but n. exc 0.18 sqm, in floors or dado etc set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or bedding layer in cm (1:4) complete all as specified and directed.
M&L for ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match etc over 15 mm thick screed in cement mortar 1:4 complete all as specified and as directed.
M&L Glazed coloured ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.
Material and labour in repair for false ceilings at any height using GI snap grid system with roll-formed out of hot dip galvanised steel caping (powder coated) main runner 38 x 24 mm , cross Tee 29 x 24 mm and wall angle 24 x 24 mm members suspended with 4mm dia GI wire, carry maximum load up to 8.10 Kg/Sqm with 4mm thick designer ceiling board , pre painted Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions size 595 x 595mmx 4mm thick any texture (Lake and Hill, oceaniccascade or Electra) as approved by GE complete all as specified and as directed by Engr-In-Charge. Note - All aluminium section will be powder coated.
S & F in repair Aluminium door single leaf with anodized aluminium frame of section 62.5 x 37 x 2.5 mm thick, shutter with bottom & middle rail of section 112.50 x 37 x 2.5 mm thick and styles & top rail of section 83 x 37 x 2.5 mm thick with centrally locking arrangement with lock make of ‘GODREJ’ or ‘LINK’ 7 lever and self closing device with rebate including jointing cleats, fixing of builders hardware fittings, necessary numbers of floor spring and glazing with 5.5 mm thick ordinary plain glass including necessary fittings, fixtures & aluminium snap beads add in repair complete all as specified & directed.
Supply and fixing in repair windows/ ventilators fabricated from 0.60mm thick roll formed section made of galvanised steel powder coated (Base steel as per IS-513"D" quality) galvanised as per IS-277 with ZINC of 120GM/SQM . Windows /ventilators having frame suitable for dual shutter i.e. inner and outer shutter with grill, glazed and wire mess shutter and all fitting, fixtures accessories incl 6mmx12mm flat iron with 10mm square bar M.S. grills complete as specified and shown in drawing No CEAF/STD-191/2014, sheet 1/2 & 2/2 dated 11.12.14(4000 series complete all as specified & directed. .
M&L for complete removal of existing treatment of old decorated surfaces of walls by steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and washing rubbing down and stoping of existing surface and making the surface even and smooth and apply two coats of distemper oil emulsion on walls complete all as specified & directed.
M&L for complete removal of existing treatment of old decorated surfaces of walls by steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and washing, rubbing down and stoping of existing surface and making the surface even and smooth and apply two coats of cement base paint over and including a coat of primer complete all as specified and as directed .
Taking down frame or Chowkhats (w/o taking off shutter from the frame) of any description exc. 1.50 Sqm and not exc. 4.00 Sqm each incl necessary repair to opening with CM 1:4 complete all as specified and directed.
S&F pressed steel frames for doors with one or morerivets including neccesary fixing lugs, hinges, lock strike plate etc of size 105 x 60mm complete all as specified and as directed.
S&F 30 mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed.
S&F 100 mm long butt hinges medium weight cold rolled mild steel alloy with galvanized complete all as specified and directed.
S&F 150 mm long Aluminium door handle, cast type, anodized complete all as specified and directed.
S&F of 150 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F door stopper of aluminium, alloy body and tongue with hard drawn steel spring fixed in floors of 140 mm overall length of cover plate complete all as specified and directed.
S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
M&L for two coats of synthetic enamel paint over a coat of pink primer on new wood surface complete all as specified and directed.
S&F in repair Stainless steel 304 grade wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed to window frame complete all as specified & directed.
M&L for preparation of old decorative surfaces including scraping down smoke dust mould, mean cut salt and trading oils and greasy spot etc. on ceiling including cornices, plasters etc. (plastered or unplastered surfaces) and applying one coat of white (lime) wash on old washed surfaces all as specified complete.
M&L for prepation of old painted wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel Paint, complete all as specified and directed by Engr-in-Charge.
M&L for one coat of synthetic enamel paint including preparation of old decorated steel surfaces/concrete surface of any description over 10 Cm width or girth not otherwise described.
Complete Removal of tree roots from roof top/wall upto 4 storey building upto depth 40mm incl make good hole with CM 1:3 and matching painting complete all as specified & directed.
M& L for mild steel TMT bar 10 mm dia and over cut to length bent to shape rqd incld cranking bending column hooking ends and binding with mild steel wire not less then 0.9mm dia.
Mahesh Enterprises
SURESH KUMAR SHARMA & CO
shakti construction
J D ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .