Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.3 LAccepted-AOC 0 HISAR HISAR HARYANA 125004 UDYAM HR 06 0052049 | HISAR | HARYANA | 125004 | L1 | Accepted-AOC AOC | |
| 2 | L2₹42.2 L+₹81,315.48 (1.96%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹42.6 L+₹1.2 L (2.96%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹43.0 L+₹1.6 L (3.87%)Rejected-Finance | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹43.3 L+₹1.9 L (4.56%)Rejected-Finance | L5 | Rejected-Finance Not Lowest |
Tender Value
₹38 L
EMD Value
₹76,000
Closing Date
16 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SEVOKE ROAD
GE Sevoke Road Post Salugara Dist Jalpaiguri PIN 734008
PROVN OF CERTAIN REVENUE AND MINOR WORK AT SEVOKE UNDER GE SEVOKE ROAD
2022_MES_535898_2
GE/SEV/16 of 2022-23
Open Tender
Civil Works
Item Rate
180 days
GE SEVOKE ROAD
As per tender documents
8 documents required · 8 mandatory
₹500
Yes
GE SEVOKE ROAD
₹76,000
Yes
16 Sept 2022
28 Jul 2022
18 Aug 2022
28 Jul 2022
16 Aug 2022
8 Aug 2022
29 Jul 2022 - 6 Aug 2022
Amount
Surface excavation n.exc 30cm deep and averaging 15cm deep in soft/loose soil and getting out complete all as specified and as directed.
Excavating in trenches not exc 1.50m wide and n.exc 1.50m in depth in soft/loose soil and getting out complete all as specified and as directed.
Removing excavated soil to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point all as specified and as directed.
Returning,filling in,including spreading,levelling,watering and well ramming in layers not exceeding 25 cm thick all as specified and as directed.
M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 meter mean radius built in CM 1:4 complete all as specified and as directed.
M&L for 15mm thick rendering on other than fair faces of brick or concrete surfaces in CM 1:6 and finished the surface even and smooth without using extra cement complete all as specified and directed.
M&L for 20 mm thick rendering on fair face of brick work in CM 1:4 in two layers of 10mm thick each using water proofing compound in top layer only including finishing the surface even and fair(WPC shall be measured and paid seperately) complete all as specified and directed.
M & L for preparation of new plastered surfaces of walls and applying three coat of white wash, complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats ofweather proof acrylic emulsion paint over one coat of primer complete all as specified and directed.
M&L for Sand filling under floors including watering and consolidation complete all as specified and directed.
M&L for PCC (1:2:4) type B0(using 12.50mm graded crushed stone aggregate) as in Damp proof course 40 mm thick horizontal or verticle surfaces including necessary formwork complete all as specified and directed.
M&L for broken stone boulders Hardcore of gauge exc. 63 mm, but n exc 100mm deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified.
M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base of floorring complete all as specified and as directed.
M&L for 40mm thick PCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggregated) over 75 mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregated) as in flooring finished even and smooth using extra cement complete all as specified.
M&L for preparation of new or previously untreated steel and iron surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat red oxide primer complete all as specified and as directed.
S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc; complete, size of frame 105mm x 60mm including one shop coat of Zinc Chrome primer complete all as specified and as directed
S & F flush sutters, 30mm thick solid core contruction, with block board core and plywood face panels,commercial type on both sides complete all as specified and directed.
S&F mild steel tower bolts stove enamelled black with bright bolt 20cm long complete all as specified and as directed.
S&F 300 mm long mild steel sliding door bolts plate type stove enamelled black with bright bolts not less than 12mm dia with and including a minimum of 6 bolts nuts, four on bolts plate & two on staple plate complete all as specified and as directed.
S&F mild steel pressed handle oval type stove enamelled black 150 mm long complete all as specified and as directed.
S&F Mild steel butt hinges medium weight cold rolled of size 100mm complete all as specified and directed.
M&L for Reinforced cement concrete (nominal mix) 1:2:4 type B-1(20 mm graded crushed stone aggregate) as in beams cantilevers, lintels over 1.5 m span complete all as specified and directed. (Note: Reinforcement and form work shall be measured and paid separately).
M&L for Reinforced cement concrete (nominal mix) 1:2:4 type B-1 (20 mm graded crushed stone aggregate) in Foundations,footings, foundation beams; bases for columns, etc and mass concrete complete all as specified and directed. (Note: Reinforcement and form work shall be measured and paid separately).
M&L for Reinforced cement concrete (nominal mix) 1:2:4 type B-1 (20 mm graded crushed stone aggregate) in slab supported on walls (chajja), beams and column in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. (Note: Reinforcement and form work shall be measured and paid separately).
M&L for preparation new wooden surfaces of any description over 10cm width of grith and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded including one shop coat of Zinc Chrome primer complete all as specified.
S&F 3mm thick sheet glass ordinary quality & glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified and directed.
S&F mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending and binding with M.S wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.
M& L for Mild steel TMT bars 05 mm dia over upto and incl 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
Use and waste formwork to side of concrete foundations, footing bases of column, raft and ,raft beams, side and soffits (if any) of foundation and plinth beams and similar work vertical or to batter , rough finished surfaces complete all as specified and directed.
Use and waste formwork to chullah hoods, slab , chajja, troughs and similar items including edges for rough finished flat surfaces complete all as specified and as directed.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self drilling and self tapping screws, neoprene and limpet washers complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self drilling and self tapping screws, neoprene and limpet washers complete all as specified and directed.
S&F rolled mild steel section including hollow section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates FE-290 Gde E-165. Complete all as specified and directed.
M&L for cement concrete of 1:3:6 Type C-1 (using 20 mm graded crushed stone aggregate) as in filling of pressed steel frame, lintel copings, hold fast block etc, complete all as specified and directed.
S&F 605X605mm anodised aluminium snap grid frame work for false ceiling including 2.5mm dia mild steel wire galvanized class 3, @ 60cm centre to entre and fixed to steel or wooden member including 4mm thick non asbestos fibre cement boards fixed or laid/ inserted to aluminium frame work as in ceiling complete all as specified and directed. Note:- The size of aluminium main and croos tee shall be 40mm x25mm x2mm and size of angle shall be 25mm x 25mm x 2mm)
Removing excavated material (soil) exc 250 mtr but n exc 500 mtr & depositing where directed, complete all as specified.
M&L for PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified.
M&L for cement concrete cat in-situ 1:2:4, type B-1 (using 20 mm graded crushed stone aggregated) as in seismic bands and other similarbands, plinth cources, string cources, lacing cources, copings etc and the like complete all as specified.
Supply only integral water proofing compound complete all as specified and directed.
M&L for brick work with fly ash brick modular size straight or curved on plan exc. 6mtr mean radius, built in cement mortar 1:6, complete all as specified and directed.
M&L for steel work in tubular truss including special shaped washer etc complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade st -240 completed all as specified and as directed.
M&L for coloured 300x200x7 mm thick glazed ceramic tiles on vertical surfaces such as skirting,dado and risers to steps etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 10mm thick cement screed bed coat in CM 1:4 etc, complete all as specified and directed.
S&F 15 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all specified and directed.
S&F 20 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all specified and directed.
S&F 25 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all specified and directed.
S&F Rotational moulded polyethylene water storage tanks 1000 Litre capacity double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including provision of necessay fittings for connection the overflow, drain out, inlet and outlet pipes, complete all as specified and as directed.
S&F Rotational moulded polyethylene water storage tanks 2000 Litre capacity double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including provision of necessay fittings for connection the overflow, drain out, inlet and outlet pipes, complete all as specified and as directed.
S&F pillar tap standard of PTMT any colour screwed for iron pipe and fixed (minimum weight 15mm-110 gms) complete all as specified and as directed
S&F stop valve standard of PTMT any colour screwed for iron pipe and fixed (minimum weight 15mm-90 gms) complete all as specified and as directed
S&F 15 mm bore two way bib cock with wall flange chromium plated with crutch or butterfly handle screwed down screwed for iron pipe 15 mm bore and fixed complete all as specified and as directed.
S& F 15 mm bore angle stop valve (male or female thread) cast copper alloy CP fancy type with capston head wall flange etc screwed down screwed for iron pipe and fixed complete all as specified and directed.
S& F 15 mm bore angle stop valve (concealed) cast copper alloy CP fancy type with capston head wall flange etc screwed down screwed for iron pipe and fixed complete all as specified and directed.
S&F Rotational moulded polyethylene water storage tanks 500 Litre capacity double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including provision of necessay fittings for connection the overflow, drain out, inlet and outlet pipes, complete all as specified and as directed.
S&F 20mm bore gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipes, complete all as specified and directed.
M&L for coloured 450x300x7mm thick glazed ceramic tiles on vertical surfaces such as skirting,dado and risers to steps etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 10mm thick cement mortar screed bed in CM 1:4 etc, complete all as specified and directed.
S&F vitreous china bowl urinal flat back size 465x355x265mm white (minimum) with gratings and union of discharge pipe ( excluding flushing cistern, flush pipe andwaste pipe) etc complete all as specified and as directed.
S&F wash hand basin, vitreous china white of size 565 x 440x210mm excluding taps, waste chain and plug and porcelain stopper but including brackets, 32mm dia waste fitting brass chromium plated and PVC waste pipe 32mm bore etc complete all as specified and directed.
S&F (EWC) Vitreous China wash down water closet pan (pedestal pattern), size 360x640x685 mm with 'S' trap white including fixing bolts, plastic water closet seat and cover closed pattern with flat bottom and mild steel chromium plated or alluminium anodised hinging device, making all necessary connections and making good the disturbed surfaces of floor complete all as specified and as directed. Make Jaquar Cat part No SLS-WHT-685155 or equivalent from list of makes.
Supply and fixing of CP soap dispenser with glass bottle complete all as specified.
M&L for coloured Non-skid ceramic tiles 7mm thick (square/ rectangular) area exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 15mm thick cement mortar screed bed in CM 1:6 etc, complete all as specified and directed.
S&F (EWC) Vitreous China wash down water closet pan (pedestal pattern), size 360x640x685 mm with 'P' or 'S' trap white including fixing bolts, plastic water closet seat and cover closed pattern with flat bottom and mild steel chromium plated or alluminium anodised hinging device, making all necessary connections and making good the disturbed surfaces of floor complete all as specified and directed. Make Jaquar Cat part No SLS-WHT-68515 or equivalent from list of makes. .
S&F PVC valveless, syphonic action type flushing cistern low level, 10 litre capacity with it's complete accessories, including connection to water pipe and PVC 32 mm dia flush pipe etc complete all as specified and as directed.
S&F PVC connection pipe 15 mm dia, 450 mm long with PTMT nut complete all as specified and as directed
S & F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying and fixing in opening as per specification & drawing complete all as specified and directed.
S&F Factory Made Solid Panel PVC Door Shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet shall be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, as per specification & drawing complete all as specified and directed.
S&F Mild steel butt hinges medium weight cold rolled of size 75mm complete all as specified and directed.
S&F aluminium anodised barrel tower bolts of extruded section, 150mm long, complete all as specified and directed.
S&F aluminum handles, cast type, anodized 125mm long complete as specified and directed.
M&L for providing precast cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) in louvered jallies 40 mm thick (measured solid) including all mouldings but excluding frame set in CM 1: 4 complete all as specified and as directed.
S&F 15 mm bore Pillar tap, cast copper alloy, with capstan head, chromium plated fancy type screwed down high pressure with or without letter hot or cold with long screwed shank and flynuts screwed for iron pipe complete all as specified and directed. Make : Jaquar Cat No ARI-39011 or equivalent from list of makes.
S&F PVC (SWR) floor trap dia of outlet 100mm, plain with grating including jointing with solvent cement complete all as specified and as directed.
S&F Brass chromium plated towel rail, , 600cm long including fittings complete all as specified and as directed. Make : Jaquar Cat No ACN-1111NM.
S& F 15 mm bore stop cock/angle cock cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe complete all as specified and directed.
S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed.
S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified & directed.
S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed.
S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified & directed.
M&L for 75 mm thick PCC 1:3:6 (type C-2) (using 40mm graded crushed stone aggregate) as in plinth protection/approach/hard standing path of bldg finished cement concrete surfaces fair and even complete all as specified and directed.
M&L fo PCC 1:3:6 (type C-2) (using 40mm graded crushed stone aggregate) as in bed for drain pipes including packing under and hauncing against the sides of pipes after they are laid and tested for 150mm bore pipe complete all as specified and directed.
N&L for 150 mm nominal dia DWCPE pipe (SN-8) pipes ISI marked laid in trenches and jointed complete as specified and directed.
S & F 110 mm bore PVC (SWR) Vent cowl complete all as specified & directed
M&L for PCC 1:3:6, type C-2 (using 40 mm graded crushed stone aggregated) as in foundation, filling and mass concrete complete all as specified.
M&L for mild steel TMT bars 6mm to 8mm dia as in reinforcement including cutting & bending and binding with ms wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping for flat surface) complete all as specified.
Excavating in post holes (or similar holes) in soft/ loose soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and as directed.
S&F Pre-painted galvalume aluminium Zinc coating GI based colour coated mangalore pattern tile profile sheet 0.50mm thick of any colour having tensile strength of 345 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.
M&L for PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in surface channels and drains complete all as specified and as directed.
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and as directed.
M&L for 100mm thick PCC 1:2:4 (type B-2) (using 40mm graded crushed stone aggregate) as in sub base of floors complete all as specified and directed.
S&F rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment (Fe 410 W Gde-E 250) Quality A complete all as specified and as directed.
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tined tacks, or galvanised wire stapless complete all as specified and as directed.
S & F 2nd class hard wood (SAL) area exc 12 sqcm but n exc 25 sqcm plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed
Supply and fixing IInd class hard wood factory made 35 mm thick glazed skelton shutters (three panel) open rebated and prepared to receive glass, gauge etc edges of framing, plain, chamfered or rounded, fitted with cut and mitred bends for securing glass/gauge etc, with sizes of members of shutters as specfied in para 8.24 (a) ;SSR 2009 (part-I) s complete all as specfied and directed.
S & F rolled mild steel angle or tee sections, fixed independently , without connecting plates, etc as in splited end fencing post Fe 410-W (Gde-E-250) quality A including drilling holes complete all as specified and directed.
S&F mild steel screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut 5 to 10mm dia of shank and exc 5cm but n exc 10cm long all as specified and as directed.
Supply only chain link fencing with 4mm dia galvanised steel wire ,size of mesh 100mmx100mm complete all as specified and directed.
Fixing only chain link fencing including line wires , any mesh, size and type to any type of standard, rails , straining bolts, etc including provision of binding wire complete all as specified and directed.
S&F mild steel flat iron (conforming to Fe -290 Gde-E-165) for securing fencing post including drilling holes, for screwing bolts etc complete all as specified and directed.
M&L for galvanisd 2 strand , steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised MS wire, staples or steel pins etc complete all as specified and directed. (each line wire to be measured separately)
S&F mild steel Framed work such as grills, gratings etc, with ends of bars shouldered or rebated or forged into spikes, framed guard bars, barred iron doors, railings, framework of water tanks and similar work conforming to Fe -290 Grade -E-165, complete all as specified and directed.
S&F steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete without glazing bars, dovetailed or welded including one shop coat of Zinc Chrome primer complete all as pecified and directed.
M&L for matt finish Endura heavy duty tiles 30 cm x 30cm, 15-20 mm thick, set jointed and pointed in neat cement slurry in floor with grey cement and pigments over and including 15mm thick screed bed of CM 1:6 all as specified and directed.
S&F 12 mm thick frameless double leaf toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot and cover plates with brass pivot and single piece M.S sheet outer box with slide plate etc and making necessary holes, etc for fixing required door fittings and lock incldung door handle, lock and stopper, floor spring etc complete all as per direction of Engineer-in-Charge.
Excavation over areas, n. exc 1.5m deep and getting out soft/loose soil for septic tank etc complete all as pecified and directed.
Excavation over areas for each additional 1.5m and part thereof in depth beyond the first 1.5m and getting out in soft/loose soil for septic tank etc.
M&L for concealed point wiring with two single core PVC insulated, unsheathed, multistranded copper conductor FRLS of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.50 sqmm green in colour as earth lead in and including PVC rigid conduit (medium grade) with all fittings & accessories including provn of MS sunk terminal box of appropriate size suitable for switch fixed flush to wall for mounting switch, sockets, fan regulators etc with 3mm thick hylum sheet top cover with screws & cup washers for one light / fan point / call bell complete. NOTE : Cost of making good the disturbed surfaces (if any) matching with the existing surface is deemed to be included in the unit quoted rates.
All as per Item Sl No - 108 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.5 sqmm green in colour as earth lead for 5/6 A switch-socket point on independent board complete.
S&F piano switch single pole 5 Amp 230 Volt all as specified and as directed.
S&F ceiling rose ,surface bakelite 65mm x 50mm size with three terminals all specified and as directed.
S&F decorative box type LED fitting 20 watt 4 feet with aluminium extruded batten luminaire for 230 volt AC complete all as directed.
S&F energy efficient BLDC (26 W) ceiling fan 230V, 1200 mm sweep without remote with all accessories and connecting up with the ceiling rose with required flexible wire of suitable size with ceiling fan complete all as specified and as directed.
S&F electronic step regulator (speed regulation in 5 steps) suitable for ceiling fan 1200 sweep/1400 mm, 120 Watt complete all as specified and directed.
Supply & Fixing DB with sheet metal enclouser 240 volts, 04 way, with rated bus bar single pole &netural double door for MCB, including cutting chases for DB of required size and making good distrubed surface area complete all as specified and as directed.
Supply & Fixing MCB double pole (DP) 240 volts of capacity 32 Amp ,C curve, complete all as specifie and as directed.
S&F MCB, SP, 10KA, 415V, "C" curve, 06-32 A, ISI Marked complete all as directed.
M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (in vertical position ) earth pit not less than 2.25 mtrs below normal ground level with the top edgeof the earth plate not less than 1.5 mtr (B.G.L.) & connected to galvanised iron wire 4 mm dia by means of bolts,nuts,checknuts & washer of galvanised iron including PCC (1:2:4) type B1 precast RCC cover slab with suitable handle made of 6 mm round bar, including necessary excavation & earth work in any type of soil , 20 mm dia med grade galavinised steel tube for watering with one end fixed with cast iron funnel & wire mesh, 15 mm bore light grade galvanised steel tubing up to 7.5 mtr length for drawing earth lead including common salt , charcoal in alternate layers etc. complete all as shown in EP no 3 of SSR Part 1 & testing on complection incl taking down old unsv earthing complete.
S&F LED street light of capacity 40 watt in Aluminium PDC housing, with IP66 protection complete all accessories with frame and connecting PVC copper wire not exc 5 mtr all directed.
S&F heavy duty exhuast fan AC, single phase, 230/240 V, of size 230mm sweep steel/aluminium metal body with lowers including making holes on wall & making good the disturbed surfaces with all connecting items complete all as specified and as directed.
S&F decorative box type LED fitting 09 watt 2 feet with aluminium extruded batten luminaire for 230 volt ocomplete all as directed.
M & L for Switch Socket Combination 5 in 1, 3 pin, 5 and 15 Amp flush type universal, 240 volts, complete all as specified and as directed.
Supply and laying in trenches/wall LT UG XLPE insulated ,armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 10sq mm 2 core including making necessery connections all as specified and as directed.
Supply & laying in trenches clear sand for cushioning under cable 8 cm below and 15 cm above complete in level all as specified and directed by Engr-in-Charge. Note:- Punned thickness shall be measured.
Supply and laying burnt clay sub class B brick as cable protection all as specified and directed.
Supply and fixing GI pipe 40mm bore medium grade for cable protection complete all as specified and as directed.
Supply & laing 25 mm bore medium grade galvanized steel water tubing with all fittings and fixed to walls or laid in floor complete all as specified.
S&F 25 mm bore stop valve screwed complete all as specified.
TAPASH SAHA
SRI SURAJIT SENGUPTA
D.D. BROTHERS
M S ALOK SAHA
BIJAN KUMAR DHAR
LIBERAL ENGINEER CONSTRUCTION
SHRI JAYANTA GHOSH
stage.html
html • 0.06 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .