Development works of furit and vegetble market udhampur 2nd Time

Amount

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead.

Dismentling tile work in floors and walls laid in cement mortar including stacking material with in 50 mtr lead for thickness of tiles 10 mm to 25 mm

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work up to plinth level in 1:3:6( 1 cement:3 Coarse sand :6 graded stone aggregate 20 mm nomnial size) (Including all carriages and leads).

Centering and shuttering including strutting , propping etc and removal of form for:

Edges of slabs and breaks in floors and walls. Under 20 cm wide.

Edges of slabs and breaks in floors and walls. Above 20 cm wide.

Half brick masnory with bricks of class designation 75 in superstructure above plinth level up to floor V level in cement mortar 1:4 ( 1cement : 4 coarse sand) (Including all carriages and leads).

Providing and laying ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of Ist quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cemnet : 4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete. In colour such as white , Ivory, Grey, Fume Red Brown. (Including all carriages and leads).

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgendy , bottle green, black of any size as approved by Engineer -in-charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and joining with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Including all carriages and leads).

Providing and laying Ist quality ceramic glazed floor tiles (thickness to be specified by the manufacturers) of Ist quality conforming to IS: 15622 of approved make, in all colours, shades except burgundy , bottle green , bloack of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement mortar 1: 3 ( 1 cemnet : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg / sqm including pointing the joints with white cement and matching pigment etc. complete. (Including all carriages and leads).

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) to IS: 7231,with all fittings and fixtures complete: 10 liter capacity -white.

Providing and fixing upplasticized PVC connection pipe with brass unions,45 cm length and 15 mm nominal bore

Providing and fixing PTMT grating of approved quality and colour. 125 mm nominal dia with 25 mm waste hole.

Providing and fixing PTMT soap dish holder having length of 138mm. Breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.

Providing and placing on terrace ( at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet , outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing wash basin with C.I. brackets, 15mm CP brass pillar taps, 32 mm CP brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the wall wherever required: White vitreous china wash basin size 550x400mmwith a pair of 15 mm C.P. brass pillar taps.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing mirror of superior glass ( of approved quality ) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing. Rectangular shape 453x357 mm

Providing and fixing P.V.C. Waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe (32 mm dia)

Providing and fixing PTMT waste coupling for wash basin and sink, of approved quality and colour; Waste coupling 31 mm of 79 mm length and 62 mm breadth weighing not less than 45 gms.

Providing and fixing PTMT towel ring trapezpidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concelaed fittings arrangements of approved quality and colour, weighing not less than 88 gms.

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved make conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm size respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: One urinal basin with 5 liter white P.V.C automatic flushing cistern.

Providing and fixing white vitreous china water closet squating pan ( Indian type): Long pattern W.C. pan of size 580 mm

Providing and fixing on wall face un-plasticized rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 75 mm diameter.

Providing and fixing on wall face un-plasticized rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 110 mm diameter.

Providing and fixing of long bend for Indian type WC

Providing and fixing 110 mm PVC (Heavy Duty) floor trap

Providing and fixing G.I. pipes complete with G.I. fittings and clamps including citting and making good the walls etc: 15 mm dia , nominal bore.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the wall20 mm dia nominal bore

Restoration of sewerage system by way of restoration of sewerage line and cleaning of spectic tank complete job.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A Switch.

3 pin 5/6 A socket outlet

Supplying and fixing following size / modules, GI box along with modular base and cover plate for modular switches in recess etc as required.

1 or 2 module ( 75mmx75mm)

8 module (125mmx125mm)

Supplying and fixing PVC batten / angle holder inclding connection etc as required.

Supplying and fixing 15 Watt LED bulbs (Havels/ Anchor/ Philips.

Wiring for circuit /submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in (surface/ recessed medium class PVC conduit as required. 2x2.5 sq.mm +1x25 sq.mm earth wire

Supply, installation and commissioning of 100 watt. LED Lights to be fixed with M.S.pipe bracket upto 1.50 m length painted with synthetic enamel paint including cost of M.S. pipe , wiring and DP switch to be fixed on electric poles / walls / shed as directed by Engineer-incharge at site complete job. ( Bajaj/ Syska / Philips)

Providing and fixing 20 mm dia PVC conduit pipe of approved make as per the direction of Engineer-in-charge .

Providing and laying bituminous macadam using crushed stone aggregates of specified grade premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-charge. 50 to 100 mm average compacted thickness with bitumen of grade VG -30 @ 3.5% ( percentage by weight of total mix) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity including tack coat using Hot straight run bitumen of grade VG-10 and all leads, lifts and carriage complete.

2.5 cm premix carpet surfacing with 2.25 cum and 1.12 cum of stone chippings of 13.2 mm and 11.2 mm size respectively per 100 sqm and 52 kg and 56 kg hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively including a tack coat with hot straight run bitumen including consolidation with road roller of 6 to 9 tonne capcity etc. complete With paving Asphalt grade VG-30 with no solvent including tack coat using hot straight run bitumen of grade VG -10, seal coat of premixed fine aggregate with bitumen of grade VG -10 and all leads , lifts and carriage complete.

Disposal of excavated earth /mulba by mechanical transport upto a lead of 5 km

sanjeev singh

NATIONAL ROAD BUILDERS

A S JAMWAL

JANDIAL INFRA DEVELOPERS PVT LTD