CA NO GE/ND31/202223 REPAIR AND MAINTENANCE TO JOINERY, INTERNAL AND EXTERNAL WALL, CEILING PLASTER AND PAINTING, PLUMBING WORK, SANITARY WORK ETC AND CONNECTED ITEMS AT NOM VARUNA UNDER GE NEW DELHI

Amount

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete.

M&L for Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for brick work with sub class B bricks, straight or curved on plan exceeding 6 M mean radius in half brick thick walls built in cement mortar 1:4 complete all as specified.

M&L Racking out of hair line cracked joints and repair/filling with crack filler silicon of Dr fixit, Fosroc, Sika or equivalent on walls complete all as per the directions of manufacturer and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed.

M&L for vitrified ceramic dark coloured tiles10 mm thick (square /rectangular) area of each tiles not exceeding 0.36 sqm, in floors set and jointed in neat cement slurry and pointed with white or coloured cement laid over 15 mm thick Screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed. Make: Kajaria/Somany/Orient/Nitco/Marbonite

M&L for vitrified ceramic light coloured tiles10 mm thick (square /rectangular) area of each tiles not exceeding 0.09 sqm, in skirtings or vertical surfaces etc. set and jointed in neat cement slurry and pointed with white or coloured cement laid over 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. Make: Kajaria/Somany/Orient/Nitco/Marbonite

M&L for glazed ceramic coloured digital tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over 10 mm thick rendering or bedding layer of cement mortar 1:4 complete all as specified.

M & L Glazed ceramic tiles in vertical surface of size 600mm x 300mm set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles over including backing layer 10 mm thick in CM 1:3 on wall colour and pattern as decided by Engr in charge complete in all respect as specified and directed. Make: Kajaria/Somany/Orient/Nitco/Marbonite

M & L Non skid joint less coloured ceramic tiles 7-8mm thick area of each tile exc 0.11 Sqm not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engr in charge Make :- Somany or equivalent in Kajaria/Orient/Nitco

M & L Non skid joint less coloured ceramic tiles 7-8mm thick area of each tile exc 0.18 Sqm not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engr in charge Make :- Somany or equivalent in Kajaria/Orient/Nitco

Demolition of stone slabs and tiles of any description or thickness in floors/walls, aprons etc laid bedded and pointed in any mortar.

M&L Granite (of any type) 20mm thick machine cut, bedded with 20mm screed bed in cement mortar 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, moulding and polishing complete all as specified and directed.

M&L 20 mm thick granite (of any type) machine cut as in vertical surfaces and like, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone incl grinding, moulding and polishing laid over and including 15 mm thick rendering in CM 1:4 complete all as specified.

M&L Machine cut kota stone slab flooring 20-25mm thick bedded with 20mm screed bed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

S&F Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.25 sq m area and not exceeding 0.5 sq m fixed with and including one number SS clamps (grade-202) of flat-30mm X 2mm , making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing &including silicon treatment complete all as specified and directed.

M& L for Endura chequered tiles of approved colour and design 20 to 22mm thick (Square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in paths, floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L 50 mm thick 1:3:6 type C-2 using 20 mm graded stone aggregates as in plinth protection laid in panels surfaces finished even & fair without using extra cement incl all as specified and directed.

Supplying and laying of 20 mm dia CPVC pipes SDR 11 fittings on walls / ceiling or laying in floors including cement solvent and all fitting complete all as specified. Make of Pipe :- Astral /Prayag.

Supplying and laying of 25 mm dia CPVC pipes SDR 11 fittings on walls / ceiling or laying in floors including cement solvent and all fitting complete all as specified. Make of Pipe :- Astral /Prayag.

S & F 20 mm dia Brass Elbow

S & F 20 mm dia Brass Elbow (3/4 x 1/2)

S & F Union 20 mm

S & F 20 mm dia Brass Tee

S & F Male Brass Threaded Adaptor (MTA/ MBTA) ) 20 mm dia

S & F Female Brass Threaded Adaptor (FTA/ FBTA) 20 mm dia

S&F CPVC BALL VALVE of outer dia 20 mm

S&F CPVC Tank Adaptor of outer dia 20 mm

Supply only plain CPVC fittings such as socket, elbow, nipple, Tee, union, Reducer, Bushing, Step over bends, End cap, End plugs etc for 20 mm bore outer dia of CPVC pipe (ISI marked) complete all as directed

Supply only plain CPVC fittings such as socket, elbow, nipple, Tee, union, Reducer, Bushing, Step over bends, End cap, End plugs etc for 25 mm bore outer dia of CPVC pipe (ISI marked) complete all as directed

Taking up or down steel tubing 15 mm bore and connections, including cleaning for refixing or removal to store complete all as directed

Taking up or down steel tubing 20 mm bore and connections, including cleaning for refixing or removal to store complete all as directed

S&F 15mm bore of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete all as directed Make of Pipe :- TATA/BST/Jindal.

S&F 20mm bore of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete all as directed Make of Pipe :- TATA/BST/Jindal.

S&F in repairs corner glass shelf of size 300x300 mm made of transparent toughened glass 5 mm thick and chromium plated double railing on front side and chromium plated knobs on both sides fixed in position complete all as specified and directed.

S&F in repairs for Glass self assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

Taking down Aluminium shutters of any description exc 1 sqm but not exceeding 2 sqm each and refixing the same in the same opening after tightening and replacing of unserviceable screws, cleat , rubber packing, aluminium beading, butt hinges etc complete all as directed. (Note: Rubber beading, snap beading etc measured and paid separately)

Taking down aluminium shutters of any description n.exc 1 sqm each and refixing in the same opening after tightening and replacing of unserviceable screws, rubber beading, aluminium beading, etc complete all as directed. (Note: Rubber beading, snap beading etc measured and paid separately)

S & F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

Supply only anodized aluminium snap beading suitable for door shutters.

Supply only anodized aluminium snap beading suitable for window shutters.

Supply only rubber packing suitable for glazing of aluminium door and window shutters.

Securing glass of any description in existing wooden frames glazed with putty/ beads including removing loose or decayed putty/beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work (New length of frame reputtied shall be measured)

Securing glass of any description in existing metal frames glazed with putty/ beads including removing loose or decayed putty/beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work (New length of frame reputtied shall be measured)

M&L running welding in repairs exc 2.5 cm length but n.exc 5 cm (thickness of metal to be welded n.exc 6 mm) complete all as directed.

M&L for one coat of synthetic enamelled paint in any approved pattern and colour including preparation of old painted surfaces of concrete/plaster surfaces exceeding 10cm width or grith not other wise provided

Taking down old false ceiling of any description including frame work in any condition all as specified an directed.

M&L for 12 mm thick Gypsum board false ceiling fixed with counter sunk screws on and including GI frame work comprising GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.90mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with GI cleat and steel expansion fastener with and including ceiling section (n exc 1.20 m length) of 0.55 mm thickness having curled web of 50 mm and flange of 26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across intermediate at 457mm centre to centre at desired heights below roof slab, including two coats of plastic emulsion paint (approved colour) over a coat of primer on exposed surfaces of ceiling boards including taking down old false ceiling complete all as specified and directed.

S&F mineral fibre ceiling boards 16mm thick 600 x 600 mm size including grid 25x25x1.6mm thick GI powder coated angles 25 x35x1.6mm size ‘T’ section fixed with suspenders from ceiling etc (Armstrong RH Dune 99, Aerolite).including removal of existing.

Providing and fixing PVC SHEET WALL PANELLING of thickness 5mm (±0.25 ) consisting of panels of desired size stuck on inner frame work of 50mm wide strips of 5mm (±0.25 ) thick Prelam PVC sheet. The panel & strips shall be Density of 600 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company. The strips should have in their center a grove of 6mm width and 1mm depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval of 10” between two PVC strips. The PVC strips shall be fixed to the wall using 65mm long M.S. screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strips of 5mm ( ±0.25 ) thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement.

Taking down chowkhats with shutter (without taking off shutters from the frame) n.exc 1.5 sqm each complete all as directed

Taking down chowkhats with shutter (without taking off shutters from the frame) exc 1.5 sq m but n.exc 4sqm each complete all as directed

Taking down shutters of any description exc 1 sqm and nexc 2 sqm each complete all as directed

S&F Solid panel PVC internal door frame (prelam) of size 50mm x 47mm made out of 5mm one side prelam colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing .The door frame shall be fixed to the wall using 65/100mm long SS Screws through the frame by using PVC fasteners. A minimum of 4nos of screws to be provided for each vertical member & minimum 2 Nos complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing .

S&F 35mm thick 2nd class HW rail and style, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified.

S&F 35 mm thick II class hard wood (door) plain framed factory made panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on the both faces. The size of rail as per IS: 1003 (Pt I) kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, supplied and fitted to chowkats complete all as specified.

M&L Fe-410-W(Gde-E-250)quality-B for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed..

Taking down shutters of any description exc 1 sqm and nexc 2 sqm each and refixing after easing & adjusting in same opening complete all as directed

Resecuring or easing & adjusting without taking down shutters of any description exc 1 sqm and nexc 2 sqm each complete all as directed

S&F in repairs MS sliding door 250 mm long bolt type stove enamelled black with bright bolt not less than 12 mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple and fixed complete all as directed.

S&F in repairs butt hinges 100mm medium weight, cold rolled, mild steel fixed with welding or screws on position complete all as directed

S&F in repairs aluminium handles cast type anodised 150mm complete all as directed

S&F in repairs 200mm aluminium anodised barrel tower bolts of extruded section complete all as directed

S&F in repairs drapery rod 25 mm dia stainless steel of grade 304 with side caps etc fixed in position with stainless steel brackets complete all as specified.

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F Stainless steel butt hinges100mm fixed with SS screws complete all as directed

S&F aluminium handles cast type anodised 150mm complete all as directed

S&F 200mm aluminium anodised barrel tower bolts of extruded section complete all as directed

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as directed.

M&L preparation of new wood or wood based surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L preparation of new steel and iron surfaces and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

Supply and Fixed Aluminium powder coated decorative grill with 6.3mm thick aluminium section and 100X100mm openings , weighing not less than 1.75Kg/Sqm and anodized aluminium 'U' shape channel frame work all-round the grill and fixed with steel screws complete all as specified and directed.

S&F in repairs aluminium powder coated door using Jindal aluminium sections . Door chowkhat with section(14130) size- 101.6mm x44.45mm x 2.00mm and Door shutter : vertical style with sections(19560) size- ( 85mmx44.45mm x 2.70 mm thick) , top rail section(19563) size- 85X44.45X2.0 thick ), lock rail section(15964) size- 100X44.50X2.0thick and bottom rail section (15964) size 101.60 x 44.50x2.50 thick ) incl 5 mm thick glass on top panel and Partly/fully fixed with 12mm thick prelaminated particle board fixed with aluminium snap beading and rubber gasket.The each shutter will be fitted with 01 No tower bolt 200mm, 02 Nos handle D type 200 mm long and one hydraulic floor spring & mortice lock all as specified.

S&F in repair Aluminium Powder coated ventilator made of aluminium section weighting 0.55 kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, 5 mm frosted glass aluminium snap beading screws,hinges complete all as specified and directed by Engr-in-Charge.(top portion will be openable shutter with stainless steel wire mess and bottom portion shall be fixed glass)

S&F locking arrangement for glass door to wall for glass doors of thickness 8mm to 12mm with stainless steel locking arrangement to lock the door from both sides including necessary cutting if required in toughened glass complete in all respect as specified. Make- Ebco /Hardwyn

S&F stainless steel door handle 450 mm long (hole to hole)for toughened glass door including necessary holes in glass complete in all respect as specified & directed. Make- Ebco /Hardwyn

M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repairs.

S&F in repair D type handle Stainless steel ( SS 304) finish size 25mm x 325 mm for glass door shutter. Make :- Ozone , Ebco & Hardwyn

S&F in repair stainless steel coated double action spring hinges of size 100 mm suitable for door existing at site complete all as specified and directed.

S&F in repair 5 mm thick window/ door glass in panels of aluminium window/doors of panel size not exceeding 1 sqm each any shape and size including heat observing film and rubber beading as per site requirement .

M&L for taking down of existing 8 mm to 12 mm thick toughened glass door (shutter ) with hydraulic floor spring and top pivot and re-fixing the same with set of new SS hydraulic floor spring & top pivot sufficient to operate for the glass doors with weight of 120-150 Kg Complete all as specified and directed. Make of Hydraulic floor spring and top pivot set : Ozone, Ebco, Hardwyn

S & F in repairs cast iron oval access door fixed with rubber gasket and suitable nuts for 100/75 mm bore cast iron pipes fitting as branch pieces/ door bends etc fixed in position complete upto four storey building block including necessary steel scaffolding complete all as specified and directed.(ISI marked)

Dismantling water tanks and removing away from site capacity of tank 500 ltrs

ditto item above but capacity of tank 1000 litrs

S&F Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position, 500 litres capacity complete all as specified and directed. Make : Sintex, Vectus, Supreme

S&F Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position, 1000 litres capacity complete all as specified and directed. Make : Sintex, Vectus, Supreme

Cleaning and removing all silt and dirt etc from tanks and form mouths of circulating pipes etc for 1000 Ltrs capacity of tanks complete all as directed

Cleaning and removing all silt and dirt etc from tanks and form mouths of circulating pipes etc for 500 Ltrs capacity of tanks complete all as directed

S&F in repairs water tank cover for water tank of capacity 500ltr fixed with brackets and screws complete all as directed

S&F in repairs water tank cover for water tank of capacity 1000 ltr fixed with brackets and screws complete all as directed

S&F in repairs ball valve of PTMT (Make: Symet/Prayag) complete with aluminium rod and high density plastic ball for 20 mm dia iron pipe complete all as directed. (Minimum weight 20mm-210gms)

S&F in repairs ball valve of PTMT (Make: Symet/Prayag) complete with aluminium rod and high density plastic ball for 15 mm dia iron pipe complete all as directed. (Minimum weight 15mm-142gms)

S&F in repairs china water closet Orissa Pan 580 X440mm long pan Ist quality ISI marked with integral foot rests, cast iron 'S' trap including provn of cement concrete bedding including connections and fixing flushing cistern/pipe and making good disturbed portion to match existing surfaces complete all as specified and directed.

S&F in repairs vitreous china white wash hand basin flat back of size 550x400mm ISI marked Ist quality including CI/MS brackets including cutting for and pinning in brackets complete all as specified and directed.

S & F in repair vitreous china wash down water closet pan (pedestal pattern) white including fixing of bolts to floor and fixing of seat cover, flushing cistern, flush pipe and PVC connection pipe etc complete all as specified and directed.

S&F in repairs brass chromium plated health faucet for water closet including PVC connecting pipe 1.0 m long with check nut and washers all as specified .((Make : Kohler/Jaguar/Hindware)

Supply only plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised device

S&F in repairs factory made manholes covers with MS flat all round the cover and incl reinforcement with cement conc 1:2:4 type B-I, (20mm graded stone agg ) of any thickness and size laid with cement mortar 1:6 in position complete all as specified and directed.

S&F in repairs 15 mm dia brass chromium plated pillar cock swan neck (T/M) fancy type, with capstan head screwed for 15 mm bore of pipe complete all as directed. Make :- Prayag Cat No. 9814 or equivalent in Kohler/Jaguar/Hindware

S & F in repair 15mm bore brass CP wall mixer with L bend (provision for over head shower) fancy type, three way type, for mixing hot and cold water screwed down for 15mm bore iron pipes complete all as specified and directed by EIC. Make : Prayag Cat No. 9375 or equivalent in Kohler/Jaguar/Hindware

S & F in repair 15mm bore brass CP single lever basin mixer fancy type for mixing hot and cold water screwed down for 15mm bore iron pipes complete all as specified and directed by EIC. (Make : Prayag Cat No. 9851 or equivalent in Kohler/Jaguar/Hindware)

S&F in repairs PVC connection 15 mm bore 450 mm long with 2 Nos PTMT nuts with washer complete all as directed Make: Symet/Prayag

S&F in repairs PVC connection 15 mm bore 600 mm long with 2 Nos PTMT nuts with washer complete all as directed Make: Symet/Prayag

S&F in repair brass chromium plated shower rose 125mm with arm 600 mm length with flange with swivel joints, any size, including fixing to steel pipe or union for 15mm bore pipe. complete all as directed

S&F in repairs 32 mm bore PVC waste pipe for WHB complete all as directed

S&F in repairs 40 mm bore PVC waste pipe for urinals/sink complete all as directed

S&F in repairs waste fittings brass chromium plated 32 mm dia for wash hand basin complete all as directed

S&F in repairs waste fittings brass chromium plated 40 mm bore for stainless steel sink/urinals

Supply only brass jumper washer, brass head, face and spindle for bib cock/pillar cock/stop cock 15 mm bore any type complete all as specified.

Supply only CI bracket of exiting size, for WHB or Kitchen Sink etc including cutting, necessary fitments for pinning in brackets complete all as specified.

M&L for manual Sealing of traps,WCs (manually) with neat cement paste after removal of water from it, to prevent or make up the leakage including cementing in cement mortar (1:3) from inside and outside both & refixing grating, plasters etc complete all as directed and as specified.

S&F PVC (SWR) 75 mm dia floor trap/nahani trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair, CI floor trap with grating including jointing to waste pipe in run lead, dia of outlet 75 mm including floor around to required depth and burning lead joints etc to facilitate dismantling old CI trap and making good complete all as specified.

Cutting chases, pinning in stone concrete block or slab walls, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring or any purpose required at site etc., and making good, cutting not exc 10 cm girth

M&L rounding to edges of stone slabs one edge such as steps, cooking platforms and other similar situations complete all as specified.

S&F for aluminium door seal upto 1200 mm long on bottom of door complete all as specified and directed.

S&F including taking down door closer aluminium extruded section body hydraulically regulated, designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

S&F in repairs chromium plated/ stainless steel body mortice lock vertical type size 100 mm MS 4 lever

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, incl pvc waste pipe and cp waste fitting.overall size 495mmx420mm bowl size 410mmx330mmx160mm complete all as specified and directed.

S&F in repairs Stain less steel plate rack made of stainless steel 1mm thick 900mmx 600mm

S&F in repairs small fittings galvanised iron medium grade such as socket, elbow, nipple, Tee, union etc for 15 mm bore pipe (ISI marked) complete all as directed (Note:- Refixing of old GI tubing upto 1.5 m included in rates)

S&F in repairs small fittings galvanised iron medium grade such as socket, elbow, nipple, Tee, union etc for 20 mm bore pipe (ISI marked) complete all as directed (Note:- Refixing of old GI tubing upto 1.5 m included in rates)

S&F in repairs PVC valveless, syphonic action type, flushing cistern of capacity 10 lit,low level, white, with inlet,ball valve, float and handle including brackets complete all as directed

S&F in repairs PVC handle for low level flushing cistern all as directed complete all as directed

S&F in repairs CP grating 100 mm dia round fixed on floor/Nahani trap fixed with white cement including necessary cutting etc complete all as directed

S&F in repairs Wash Hand Basin of size 550mmX425mm counter top white including 32mm bore dia CP waste coupling, complete all as directed

Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks,etc.complete all as directed

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls as in rain water pipes of four storied buildings complete all as directed

S & F PVC (SWR) bends 110mm bore any radius for rain water pipes of four storied buildings complete all as directed

S&F 20mm dia CP finish brass alloy towel rail, 600mm long fixed in repairs complete.

S&F in repairs chromium plated cast copper alloy angle valve fancy type with capstan head screwed down ends for high pressure for 15 mm bore iron pipe complete all as directed. MAKE : Kohler / Hindware / Jaquar

S & F in repair 15mm bore dia Stainless Steel finish 2 way Bib Cock quarter turn including cover plate complete in all respect as specified and directed by Engr-in-Charge. MAKE : Kohler / Hindware / Jaquar

S&F in repairs 15 mm dia cast copper alloy stop valve screwed down for high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete in all respect as specified.

S&F in repairs 20mm bore gun metal globe or gate valves "ISI MARKED" with iron wheel, screwed both ends for iron pipes fixed complete in all respect as specified

S&F in repairs 25mm bore gun metal globe or gate valves "ISI MARKED" with iron wheel, screwed both ends for iron pipes fixed complete in all respect as specified

S&F 150mm PTMT Symet Bath assets Grating square hole/without hole fixed in position over Rain Water Pipe/nahani trap with cement slurry

S & F in repair 15mm bore long body bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as directed. (Minimum weight 15mm-90gms) MAKE : Kohler / Hindware / Jaquar

S & F in repair 15mm bore Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed complete all as directed. (Minimum weight 15mm-90gms) MAKE : Kohler / Hindware / Jaquar

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, aluminium frame, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 4 mm thick frosted glass sheet of ordinary quality size n exc 0.5 sqm in each pane including any required accessories beading, rubber packing etc to be fixed in aluminium frame complete all as specified and directed.

supply only 4mm thick plane Sheet glass, ordinary quality exc 0.5 sq. m in each pane

Supply only Solar control film 25 micron reflective type (Garware/Sun control or equivalent) of required colour and size

S&F in repairs Vitreous China urinals, half stall urinal, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) colour as decided by engr in charge complete all as specified and directed.

S&F brass chromium plated Urinal spreader heavy duty of PTMT any colour for fixing with 15mm dia pipe.(Minimum weight 60gms) suitable for half stall urinal fixed with stainless steel screw complete all as specified and directed.

S& F glazed and gauzed three track aluminium powder coated sliding window made out of Jindal extruded aluminium window classic 18mm series as mentioned below and glazed with 5 mm thick glass fixed with rubber beading/gasket and GI fly proofing and aluminium powder coated beading all around and lock type handle of size 75mm etc complete all as specified and directed:- (a) outer Frame with rectangular section -14035, frame bottom with section 20957 and frame top and sides with section-20958 (b) Shutter : top and side with section-20606 , interlocking with section-20605 and bottom with section-20604 (to be fix in bathroom for ventilator purpose, including make good of dismantled portion)

S&F in repair 15mm bore dia Stainless Steel finish angular stop cock with wall flange quarter turn full Antique including cover plate complete in all respect as specified and directed by Engr-in-Charge. Make:Jaquar Code : QQT-7053 or equivalent in Kohler / Hindware

S & F in repair 15mm bore dia Stainless Steel finish 2 way Bib Cock quarter turn including cover plate complete in all respect as specified and directed by Engr-in-Charge. Make:Jaquar Code : KUB-35041 or equivalent in Kohler / Hindware

Supply and fixed in repair Hindware Amazon 15mm bore dia chromium plated Brass single lever basin Mixer, (Item code : F320011) round spout with popup Waste assembly with 10mm dia , 450 mm long copper pipes complete in all respect as specified and directed by Engr-in-Charge. (Make:-Hindware CAT Part No: F320011 or equivalent in Kohler / Jaquar

Supply and fixed CP finish Robe Hook complete in all respect as specified and directed by Engr-in-Charge. Make:- (Make:-Hindware CAT Part No:F890001 or equivalent in Jaquar / Kohler

S&F in repairs chromium plated health faucet (Brass) with double Lock including wall Hooks & flexible pipe 15mm bore hose connecting pipe 1.2 m long with check nut and washers complete all as specified . (Make:-Hindware CAT Part No : F160002CP or equivalent in Kohler / Jaquar

Supply and fixed in repairs chromium plated finish paper holder complete in all respect complete as specified and directed by Engr-in-Charge. Make : Hindware cat. No. F840008 or equivalent in Kohler / Jaquar

Supply and fixed in repairs 600 mm long C P finish CP Towel Bar complete in all respect as specified and directed by Engr-in-Charge. Make:- Hindware Cat. No. F840013 or equivalent in Kohler / Jaquar

S&F in repairs Square shape Hindware fonte ceramic table top wash hand basin Star white Italian collection (Model No. 91043 of size 61 x 46 x 15 Cm on 18 mm thick granite (colour as approved) machine cut as in platforms, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone incl grinding and polishing laid over 15 mm thick screed bed or bedding layer of cement mortar 1:6 including required angles, 32mm bore dia CP waste coupling, and all required fittings complete in all respect as specified and directed MAKE : Hindware (Model No. 91043) or equivalent in Kohler / Jaquar

Supply and fixing in repairs floor mounted coupled star white one piece water closet (Pedestal pattern) (Italian collection) premium class of cat part No 92551 (S-22) 70 x 38 x 73 Cm with P or S of size 220 mm, EWC with inbuilt sensor for touchless flushing, ensure more hygiene, slow falling seat cover, Elegant design, Easy clean, I trap including soft closed seat cover, hinges fixing accessories set and accessories set, incl flushing cistern, with cistern fittings connection to drain or (outgoing pipe) & to flushing pipe anti siphonage pipe etc. complete in all respect as specified and directed. Make : Hindware cat part No 92551 (S-22) 70 x 38 x 73 Cm or equivalent in Kohler / Jaquar

S&F in repair CP Wall mixer (wall mounted model ) 3-1 system (Code: QQT-7281) including provision for telephonic shower and overhead shower complete with 115mm long pipe connecting legs and flanges. including Hand shower (Code : HSH-1721) 105mm dia round shape multi flow with air effect (ABS body & face plate chrome plated) with rubbit cleaning system and over head shower 105mm dia round shape single flow (ABS body chrome plated with gray face plate) with rubbit cleaning system Code (Code : OHS-1709) and with shower arm 20mm x 600mm long round shape for wall mounted shower with flange (Code : SHA479L600) or equivalent in Kohler / Hindware complete all as specified and directed by EIC

S & F PVC mirror cabinet of size 350 mm x 450 mm x150 mm with openable single looking mirror with PVC inner & outer shelves of any colour, including taking down old looking mirror & wooden cupboard mirror complete all as specified and directed MAKE : CERA / Hindware / PRAYAG

Supply and fixed peg set of 6 fixed with rawl plug Make : Prayag Cat no BEA-30 or equivalent in CERA / Hindware / PRAYAG

S & F in repairs Hindware Cat No. F-840004 Soap Holder (Brass) with tumbler holder MAKE : Hindware Cat No. F-840004 or equivalent in Kohler / Jaquar

M&L for complete removal of existing treatment from old surfaces of wall by mechanical grinder and applying three coats of white wash including preparation complete all as specified and directed.

M&L for complete removal of existing treatment from old decorated plastered wall surfaces by mechanical grinder and applying two coats of oil bound distemper over a coat of primer and over incl 3mm thick wall care Birla putty complete all as specified and directed.

M&L for complete removal of existing treatment from old surfaces of wall by mechanical grinder and applying two coats of Plastic emulsion paint with roller finish on walls over a coat of primer including preparation of surfaces with the application of white cement base wall care putty complete all as specified and directed.

M&L Preparation of old plastered surface of walls and applying one coat of oil bound distemper on walls all as specified and directed.

M&L for complete removal of existing treatment from old surfaces of wall by mechanical grinder and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.all as specified and directed.

M & L Finishing walls with Acrylic Smooth exterior paint of required shade : one or more coat applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90Litre/10 sqm) complete all as specified and directed.

M&L for preparing old surfaces, of wood of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparing old surfaces, of steel and iron work of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick ready mix plaster on fair or other than fair faces of brick or concrete external surfaces of walls finished even and smooth complete all as specified and directed. (water proofing compound shall be measured and paid separately)

M&L for rendering 15 mm thick ready mix plaster on fair or other than fair faces of brick or concrete internal surfaces of walls finished even and smooth complete all as specified and directed. (incl new brick work)

Supply only water proofing compound liquid @ 200 ml / per 10 sqm area of plaster complete all as specified and directed.

M & L Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

M & L Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper on walls over a coat of primer and over incl 3mm thick wall care Birla putty complete all as specified and directed.

M&L 10 mm thick rendering on ceiling surfaces with ready mix plaster complete all as specified and directed.

M&L Preparation of new plastered or un-plastered surface of ceiling and applying three coats of white wash on ceiling complete all as specified and directed.

M&L for one or more coat of French polishing on wood surfaces of any description, width or grith including cleaning and preparing the old surfaces complete all as specified and directed.

Dismantling loose concrete cover of RCC columns, beams, slabs, chajjas, parapets, railing and the like as directed without disturbing the core of RCC member, roughening and cleaning concrete surfaces with steel wire brushes, washed with and allowed to dry, including application of rust removal cum passivator painted with brush to the rusted reinforcement (and removing rust with flex after 24hours of application of rust remover with the help of wire brush, sand paper) and also applying zinc anti-rust agent as per manufactures method of application to re bar corrosion protection system to reinforcement surface of steel reinforcement with existing reinforcement as directed wherever required binding RCC 100mmx100mm (10 gauge welded mesh) & tack welding after that applying polymer modified cementious bonding coat, prepared and applied on the concrete surface with 1 part of sika latex or equivalent in Forsoc/BASF/Dr Sunanda with 4 part of water and 6 part of cement by weight, coverage of sika latex shall not be more than 0.25 Kg/Sqm for one coat. Adhesive bond strength not less that 2.5 mpa, After this, providing 40mm (average thickness) guniting mix @ pressure 2.2 to 2.5 kg per sqcm with anti corrosion admixture (using 1 part of ordinary potland cement 43 grade and 2 part of Ghagger sand mixed with adhesive /admixture at the rate as per manufacturer instruction and as directed) including stripping floating with wooden strippers for proper dimension control necessary, formwork and scaffolding, complete surface of guniting to be finished fair with 10mm thick plaster in cement 1:4 with water proofing compound @ 3% by weight of cement cleaning and removing of waste material etc as directed at site. ( Welded mesh & addl reinforcement if required measured and paid separately) Note: Only steel scaffolding is allowed and rate included in above item. The work shall be carried out by enclosing affected area by green cloth) up to G+3 storey building.

M & L expanded metal, cut to length, bent to shape required of mild steel wire mesh / welded mesh and tying with and including annealed mild steel wire not less than 0.9mm dia binding wire or galvanised wire staples complete to existing reinforcement or steel members. (mesh weight not exceeding 4.00 Kg/Sqm) complete all as directed

S & F PVC chhaja (Factory made) exc 0.2 sqm and not exc 0.6 sqm and fastener 150mm long with complete set as per sample including demolition of old RCC chhaja complete all as specified and directed by Engr-in-charge and approval by GE

M&L complete removal of existing treatment from old surfaces of ceiling by mechanical grinder and applying two coats of oil bound distemper on ceiling over a coat of primer and over incl one coat of Birla putty complete all as specified and directed.

M&L for complete removal of existing treatment from old surfaces of ceiling by mechanical grinder and applying three coats of white wash complete all as specified and directed.

Demolition cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for in ground floors and upto 4 storey complete all as specified and directed.

M&L for PCC/RCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in lintels upto 1.5m clear span, cills , copings and like incl. weathering , slightly rounded or chamfered angles and throating including formwork (straight or curved) as directed

Demolition cement concrete(reinforced) in ground floors and upto 4 storey of any description and in any position incl MS pipes Scaffolding and making arrangements with hessian clothes for protection from falling of concrete & all other safety precautions complete all as specified and directed.

M&L for reinforced cement concrete M-25 (Design Mix) using 20 mm graded aggregate as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slab and in shelves and the like. complete all as specified and directed.

M&L Form work to soffits of suspended slabs as roof slabs, floor slabs, landings and similar work n.exc 200mm thick for rough finished surfaces complete all as specified.

M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as directed by Engr-in-Charge.

Ditto as per item no above here-in-before but 6 to 8 mm dia

M & L uprooting of plants (girth n.exc 15 cm of trunk to any height of plants) grown along the pipes or walls, chajjas, parapets and roof of bldgs. and making good the surfaces as per existing surfaces and pouring acid not less than 100 ml for each plant in the root to avoid further growth as directed. Any other grass plants etc below 45 cm height shall be deemed to be removed from the premises complete all as specified and directed. Note: Work has to be executed up to (G + 3 storey) bldg.

Attending complaint for petty repair to leaking water in bib tap, pillar tap, stop cock, angle valve, flushing cistern, WHB, Sink, wall mixer etc of any description any size by changing the washers (s)/jumper (s) etc, by adjusting/replacing the washer(s) and adjustment of lever required for making the flushing cistern functional, by tightening the leaking waste pipe of WHB/Sink and providing 'M' seal to stop leakage as required. Removal of air lock/blockage of water in GI water tubing and cleaning the pipe or fitting etc including replacement of major defective item if required, complete all as directed by Engineer-in-Charge. Notes 1:- The contractor shall make all arrangement for attending the different types of complaints of NOM Varuna area on day to day basis. Any major item required to be replaced with new one, to make the system functional shall be measured and paid for separately as under respective item of this schedule. Old retrieved item(s) as considered in 'Schedule of Credit' shall become property of the contractor. 2 :- Contractor shall engage One Skilled Plumber with one helper including all necessary T&P on all working days from 9AM to 5:30 PM. Additional workers can be engaged if nature of work required to be completed with in fix time frame as desired by the Engr-in-Charge. Rate shall be quoted accordingly, keeping in mind above said provisions. 3:Where material provided is paid as "S&F" under respective item of Sch'A' the payment of complaint shall not be paid. 4. Proper records (date wise) of complaints received & rectified by the contractor and attendance register of trademen shall be maintained and shall be produced for verification at the time of payment of each RAR/Bill. 5 :- Contractor shall be penalised @ Rs.100/-per complaint perday, if he fails to attend the complaint within time 9AM to 5:30 PM on same day.

Attending complaint for repair to easing of any type of Doors/Window/Cupboard shutters incl Alu doors by tightening of hinges /handles/ aldropbolt/ tower bolt/ knobs, hasp and staple etc of any size/any number of panels for easy closing/ opening or changing the position of hinges, adjustments of tower bolts, sliding bolts, replacement of looking mirror, curtain rod etc complete including replacement of minimum defective item if required, complete all as specified and directed by Engineer-in-charge. Notes 1:The contractor shall make all arrangement for attending the different types of complaints NOM Varuna on day to day basis. Any major item required to be replace with new one, to make the joinery work functional shall be measured and paid for separately as under respective item of this schedule. Old retrieved item(s) as considered in' Schedule of Credit' shall become property of the contractor 2:Contractor shall engage One Skilled Carpenter with one helper including all necessary T&P on all working days from 9AM to 5:30 PM. Additional workers can be engaged if nature of work required to be completed with in fix time frame as desired by the Engr-in-Charge. Rate shall be quoted accordingly, keeping in mind above said provisions. 3:Where material provided is paid as "S&F" under respective item of Sch'A' the payment of complaint shall not be paid. 4.Proper records (date wise) of complaints received & rectified by the contractor and attendance register of tradesmen shall be maintained and shall be produced for verification at the time of payment of each RAR/Bill. 5.Contractor shall be penalised @ Rs.100/-per complaint per day, if he fails to attend the complaint within time 9AM to 5:30 PM on same day.

M/S SONU ENTERPRISES

Ex Serviceman Enterprises