Supply and Fabrication of MS Structural parlour of 12ft X 10ft size in the premises of Guindy Gandhi Mandapam.

Amount

Earth work narrow excavation for foundation in all soils and sub-soils and to full depth as may be directed except hard rock requiring blasting inclusive of shoring, shuttering and baling out water wherever necessary, refilling the sides of foundation with excavated earth in layers of not more than 15 cm thick, watered, well rammed, consolidated and depositing the surplus earth on bank with initial lead of 10 m & initial lift of 2 m, clearing and leveling the site etc., complete as directed by the Federation officers and as per standard specification.

Supplying and filling Stone dust in basement and foundation laid in layers,watering and consolidation etc complete as per standard specification.

Plain Cement Concrete 1:4:8 (One Cement, Four M-sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering for flooring and foundation and including side shuttering, compaction, curing etc., complete as directed by the departmental officers.

Brick work in cm 1:5 using stock brick of size 9"x4.5"x3"including curing etc complete with standard specifications.

Plastering in C.M 1:5 - 12 mm thick including the cost and conveyance of all to site and all labour charges etc complete and as per standard specifications.

Supply and fabrication of MS structure for Parlour including the cost of all to site and all labour charges and as per standard specifications and as per design etc complete.

Supply and fixing 18 gauge MS sheet panels for structural Parlour including the cost and conveyance of all to site and all labour charges and as per standard specifications and as per design etc complete.

Providing MS powder coated 0.47mm thick sheet roofing / side walling including the cost and conveyance of all to site and all labour charges and as per standard specifications and as per design etc complete.

Supply and fixing Steel Rolling Shutter [pull and push type with ISI monogram] of approved quality with MS laths 75 mm wide and 18 gauge thick to different sizes including all accessories like sliding grooves, shafts, springs, bearings, hood & locking arrangements and grouting the sides & top assembly with walls & beams, painting one coat of red oxide primer etc., complete as directed by the Federation officers and as per standard specification. Manually operated (upto 8 m² area)

Painting new iron work for window shutters, ventilators, iron grills, weld mesh screen with two coats of approved quality and colour of ready mixed synthetic enamel paint and scraping the surface with emery paper, in all floors etc., complete as directed by the Federation officers and as per standard specification.

Supply and Fixing of SS sheet for counter in kiosk of 304 grade 2R(BA) finish 2000x1200x1.00 mm size etc., complete as directed by the Federation officers and as per standard specification.

Supplying and fixing in position of Gypsum board FALSE CEILING ARRANGEMENTS with aluminium anodised ' T' Section and 'L' angle frame work of grid size 60x60cm with aluminium T section and 'L' angel of size 25x25x2mm thick and the same is supported @ suitable intervals by adjustable type 6mm dia MS rod with suitable threaded nuts suspended rods hung from ceiling at 100cm c/c in both directions and fixing 60x60cmx20mm thick thermocole in the grid so as to give a seat to false ceiling including painting the 6mm dia MS rod etc.

Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame workvertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights. The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is – 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25 + 3.5 + 0.25) alstrong or equivalent fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the departmental officer

Supplying and laying Marbonite tiles for a size of 0.60*0.60m of approved quality and color set in C.M 1:3 20mm thick including the cost and conveyance of all to site and all labour charges etc complete and as per standard specifications.

Supplying and laying Pathway tiles for a size of 0.30*0.30m of approved quality and color set in C.M 1:3 20mm thick including the cost and conveyance of all to site and all labour charges etc complete and as per standard specifications.

Supplying and painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint (interior) of first class quality and of approved color over one coat of priming coat including priming coat and also make good of the surface with sand paper, putty, scaffolding etc., complete as directed by the departmental officers.

Supply and providing Vinyl stickers to support with "AAVIN" product printed on digitally with lamination to cover internal , external wall of kiosk external wall of the kiosk Including fixing with suitable polymer based adhesive , transportation labour charges.(LR)

GST (Note: The tenderer should quote the amount towards Goods and Service tax (GST) in the appropriate columns in terms of percentage (%). If not quoted, it will be considered that the rate quoted is inclusive of GST.)

DESIGNFORGE CONSULTING AND CONSTRUCTIONS PRIVATE LIMITED (BID ID -1416031)

SRI VISALAKSHI CONSTRUCTIONS (BID ID -1416057)