REPAIR TO FLOORING ALUMINIUM DOORS/ WINDOWS JOINERY,SANITARY FITTINGS, PLUMBING, PLASTERING, CEILING AND MISC WORKS IN VARIOUS OFFICE BUILDING AND REPAIR / MAINT OF INTERNAL WIRING INCLUDING REPLACEMENT OF ELECTRICAL FITMENTS IN TECHNICAL AREA AT AF

Amount

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness, (Below or above ground level) and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 m, complete all as directed.

Demolition of reinforced cement concrete of any description and in any position and removal of debris to a distance n.exc. 50 m, complete all as directed.

Demolition of Brick work or hollow block masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stone work and precast concrete articles and removing rubbish all the premiser, complete all as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets any thickness and wall paneling including cover fillets, complete all as directed.

Dismantling floor, hearth or wall tiling including cement mortar beddeing (but not backing), removing serviceable tiles and removing rubbish off the premises, complete all as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame or concrete surrounds including punching or drilling out old glazing pins / spring clips and removing rubbish off the premises providing and fixing new ones, complete all as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frame or concrete surrounds glazing with putty or wooden beads and removing rubbish off the premises, complete all as directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removing of rubbish off the premises, complete all as directed.

Providing, cement concrete type B1 (1:2:4) (using 20mm graded crushed stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as directed.

M & L for 40 mm thick plain cement concrete type B1, (1:2:4) (using 20 mm graded stone aggregate) in flooring laid in alternate panel divided with glass strip including finishing the surface even and smooth with using extra cement, complete all as directed.

M & L for Glass dividing strips, 3 mm thick and 28 mm width, complete all as spcified and directed

M & L for 25 mm thick PCC (1:2:4) type B-0 (Using 12.5 mm graded crushed stone aggregate) in level course of floorings finish even and rough to receive floor finishes, complete all as directed.

M&L for Brickwork with sub-class 'B" bricks, straight or curved on plan to any radius in Half Brick thick walls built in cement mortar (1:4), complete all as directed.

M&L for Brickwork with sub-class 'B" bricks, straight or curved on plan exc 6m mean radius in one brick thick walls built in cement mortar (1:6), complete all as spcified and directed.

M & L for mild steel TMT bars 10 mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as directed.

M & L for mild steel TMT bars 5 mm to 10 mm dia, cut to length, bent to shape required in stirrups, spacers and binders and binding with mild steel wire (annealed) and not less than 0.9 mm dia, or securing with clips, complete all as directed.

M& L Chequered cement concrete tiles 20cm x 20cm x 25mm thick with grey pigment cement and pigment, set, jointed and pointed in neat cement slurry in floors & including 15 mm thick screed bed in cement mortar (1:6), complete all as spcified and directed.

M&L for Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, complete all as directed.

M & L for 20mm thick Granite slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as directed.

M&L for Non skid Coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed of cement mortar (1:6), complete all as specified and as directed.

M & L for Joint free coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding. 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6), complete all as directed.

M & L for coloured Glazed ceramic tiles of size 350x 250x 7 mm/ 450X 350X 7mm thick in vertical surfaces set and jointed in neat cement slurry, pointed with white or coloured cement to match over and including 10 mm thick bedding layer of cement mortar (1:4), complete all as directed.

Materials and labour for scratch free light shade vitrified ceramic tiles 10mm thick (square/rectangular), polished, area of each tiles not exceeding 0.36 sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in cement mortar (1:6), complete all as specified and as directed.

All as per item No.23 above but size of each tiles exc 0.42 sqm and n.exc 1 sqm, complete all as directed.

M&L for vitrified ceramic tiles of light shade 10mm thick (Square or rectangular) polished, area of each tiles n.exc. 0.37 Sqm in floors/skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match over & incl 15 mm thick screed bed or backing layer in CM (1:4), complete all as directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished even and smooth without using extra cement, complete all as directed.

M & L for rendering 10 mm thick on surfaces of ceiling in cement mortar (1:4) and finished even and smooth without using extra cement, complete all as directed.

Material & labour for rendering 15 mm thick in cement mortar (1:4) in two layers (10 mm thick in first layer and 5 mm thick in second layer) mixed with water proofing compound as per manufacturer’s instructions in top layer. (Note : WPC will be measured & paid separately)finished even & smooth without using extra cement, complete all as directed.

Supply only liquid water proofing compound of approved quality, complete all as directed.

M&L painting walls with acrylic emulsion exterior paint of required shade : colour as approved by GE. Over a coat of priming coat of exterior wall primer, complete all as directed all as directed.

M & L for preparation of new plaster surfaces and applying two coats of cement base paint on plastered surface of wall over one coat of alkali resistant primer, complete all as directed.

M & L for preparation of new plastered surfaces of wall and applying two coats of distemper oil emulsion over one coat of priming paint all as directed by Engineer in Charge, complete all as directed.

M & L for preparation of newly plastered surfaces of wall and applying three coats of white wash, complete all as directed.

M & L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as directed.

S & F 4 mm thick sheet glass ordinary quality, glazing with oil putty and glazing pin and wood bid in square n. exc. 0.5 sqm in each paneas, complete all as directed.

Taking down of chowkats or frames exc. 1.5 sqm but n. exc 4 sqm each (without taking off shutters from the frames) and set aside or removing from site, complete all as directed.

Taking down of chowkats or frames not exc. 1.5 sqm each with shutters (without taking off shutters from the frames) and set aside or removing from site, complete all as directed.

Taking down shutter of any description exc 1 Sqm but not exc. 2 Sqm each and removing from site complete all as specified and as directed.

All as per item No 39 here-in-above but of size exc 2 Sqm each, complete all as directed.

Taking down door shutter of any description n.exc 1 Sqm and refixing in the same opening after minor repairs, complete all as directed.

Taking down door shutter of any description exc 1 sqm but n.exc 2 Sqm and refixing in the same opening after minor repairs, complete all as directed.

Taking down door shutter of any description exc 2 sqm and refix in the same opening after minor repairs, complete all as directed.

Resecuring or easing and adjusting without taking down shutter of any description n.exc 1 Sqm and refixing in the same opening after minor repairs, complete all as directed.

Resecuring or easing and adjusting without taking down shutter of any description exc 1 sqm but n.exc 2 Sqm and refixing in the same opening after minor repairs, complete all as directed.

Resecuring or easing and adjusting without taking down shutter of any description exc 2 sqm and refix in the same opening after minor repairs, complete all as directe

M&L for refixing second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as directed.

S&F 35 mm thick factory made 2nd Class Hard wood Plain framed, panelled shutter (two panel) withlock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as directed.

M & L for 30 mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc (with sash bars), divided in to squares, with plain, chamfered or rounded, and rebated sash bars, any numbers for securing glass etc for windows, ventilators all as specified in SSR part I section 8 clause 8.24 (b), complete all as directed.

S&F stainless steel wire cloth,0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples to steel shutter, complete all as specified and directed.

S&F in repairs stainless steel wire cloth,0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed wooden beading to wooden shutters, complete all as specified and directed.

M & L for preparation of new wood or wood based surfaces of any description not otherwise described, over 10 cm width or girth & applying with two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet rreinforced with MS square tube supplying & fising in opening , complete all as directed.

S&F Factory made panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes and bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struct inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rail with suitable PVC sheet beading and jointed together with solvent cement at site, complete all as directed.

Supply & Fixing 150 mm long aluminium anodized barrel tower bolts of extruded section, complete all as directed.

Supply & Fixing 100 mm long aluminium anodized barrel tower bolts of extruded section, complete all as directed.

S & F 300 mm long mild steel sliding door bolts, plate type stove enameled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as directed.

S & F 100mm butt hinges, medium weight, cold rolled mild steel, complete all as directed.

S&F Butt hinges ,extrudrd aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type E-22 of 75mm size, complete all as directed.

S & F 125 mm size mild steel pressed handle oval type stove enameled, black, complete all as directed.

S & F 125 mm size aluminium handle, cast type, anodised, complete all as directed.

S & F 100 mm size aluminium handle, cast type, anodised, complete all as directed.

S & F mild steel hold fast made out of MS flat iron conforming to Fe-290 Gde-E-165 for chowkhats and other small articles including making shape, drilling hole etc., complete all as directed.

M & L for plain cement concrete type B1(1:2:4) (Using 20mm graded stone aggregate) as in hold fast block including necessary form work, complete all as directed.

Gl frame work for seamless ceiling grid size 605mm x 605mm comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web, complete all as directed.

Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws, complete all as directed.

S & F 2nd class hardwood plain fillets, square, rectangular or triangular in section, wrought, secured with screws, sectional area exc. 6 sqcm & n. exc. 13 sqcm, complete all as directed.

S & F in repairs 2nd class hardwood plain fillets, square, rectangular or triangular in section, clean sawn, secured with screws, sectional area exc. 13 sqcm & n. exc. 25 sqcm, complete all as directed.

M & L in repair for second class hard wood in scantling 40 Sqcm and over in section, clean sawn, timber fixed in frame work, complete all as directed.

M & L for preparation surfaces of wood and wood based materials, new or old of any description and girth, not otherwise described and treated with two coats of creosote oil, complete all as directed.

M & L for preparation of new wood or wood based surfaces of any description not otherwise described, n.exc. 10 cm width or girth & applying with two coats of synthetic enamel paint over a coat of pink primer, complete all as directed.

S & F in repair 110 mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls with stack clamp every one mtr apart, complete all as specified and as directed.

S & F 110mm bore PVC (SWR) bends any radius without door, complete all as specified and as directed.

S&F in repair aluminium extruded section body door closer hydraulically regulated universal type,sutiable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg of extruded aluminium sectiondesignation No-3, complete all as directed.

S&F in repairs 5 mm thick tinted sheet glass ordinary quality and glazing with aluminium glazing clips& EPDM beading in square exc 0.5 sqm in each pane, complete all as directed.

Supply only 5.5 mm thick sheet glass ordinary quality and glazing with aluminium glazing clips& EPDM beading in square exc 0.5 sqm in each pane, complete all as directed.

S&F in repairs 12mm thick prelaminated particle board, exterior grade prelaminated one sides with decorative choice laminateson other side balancing white lamination, fixed with screws to timber frame work / mild steel framing, complete all as directed.

S&F powder coated coloured anodised aluminium frame for doors, windows, ventilators, partitions with one or more rebates including joining cleat for fixing etc., complete all as directed.

S&F anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beadingscrews etc. powder coating of any colour (Thickness or powder coating not less than 50 micron), complete all as directed.

S & F in repairs aluminium welded grill of mesh size 90mm x 90mm of aluminium bars having cross sectional area not less than 30 Sqmm, decorative type including frame and necessary fittings etc., complete all as specified and as directed.

S & F in repair steel ventilators with top hung shutter including hinges, steel peg stay, complete with glazing bars, complete all as specified and directed.

S & F in repair steel windows or ventilators, fixed type, complete all as specified and directed.

S&F in repair steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded, complete all as per specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for and removing from site of work, complete all as per specified and as directed.

S&F Mild steel frame work as grills, gratings, etc.with end of bars shouldered and/or riveted, framed guard bars, railings, frame work of water tanks and similar work conforming Fe 290, Gde E165, complete all as specified and directed.

Taking up or down 15 mm bore GI water tubing and connections with fittings including segregating of serviceable pipes and keep in safe custody for reuse in the work and removing unserviceable pipes and fittings from site of work, complete all as specified and as directed.

All as per item No 86 here-in-above but dia of pipe 20 mm, complete all as specified and as directed.

Refixing of 15mm dia old steel tubing and connections in new or old position (walls, ceiling, floors, etc.), complete all as specified and as directed

All as per item No 88 here-in-above but dia of pipe 20 mm, complete all as specified and as directed.

Supply and fixing 15mm bore GI water tubing, medium grade, ISI marked with all fittings and fixed to wall and laid in floor, complete all as specified and directed.

All as per item No 90 here-in-above but dia of pipe 20 mm, complete all as per specified and as directed.

S & F 500 ltrs capacity Rotational moulded three layer polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position and dimantling/taking down old U/S water tank of any descripsion and making including connections, complete all as specified and directed.

S & F 1000 ltrs capacity Rotational moulded multi layer polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position and including dimantling/taking down old U/S water tank of any descripsion and making connections, complete all as specified and directed.

S & F 20 mm bore dia., ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed , complete all as specified and directed. (Make : PRAYG or equivalent).

S & F 15 mm bore dia., ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed , complete all as specified and directed. (Make : PRAYG or equivalent).

Supply and fixing in repair vitreous china wash hand basin, oval type, pastel colour, of size 580 mm x450 mm including cutting for and pinning ends of brackets complete with waste coupling, complete all as specified and directed.

Supply & fixing in repairs vitreous china squatting pan "Orissa" pattern long pan, size 580 x 440 mm white with integral foot rest (excluding cistern and flush pipe), complete all as specified and directed.

S & F in repair vitreous china bowl urinal flat back, size of 460 x 350 x 260 mm white (min), with grating and union for discharge pipe (excluding flushing cistern, flush pipe & water pipe), complete all as specified and directed.

S & F Vitreous China wash down water closet (Pedestal pattern), white (EWC) including Plastic seat of same colour of WC, closed pattern with flat bottom, and cover and mild steel chromium plated hinging device, complete all as specified and directed.

Supply and fixing in repair 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including bracket, complete all as specified and directed.

S&F in repair flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern, complete all as specified and directed.

S&F In repair Sinks With Drainage Board made with stainless steel 1 mm thick kitchen, with plug, washers, Waste coupling, waste pipe etc.; Including bedding In cement mortar to dwarf wall or including fixing cantilever bracket and connection union to pipe overall size 915mmx460mm bowl size 410mm X 330mm X 160mm, complete all as specified and directed.

S&F in repair stainless steel 1 mm thick kitchen sink with plug, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330mm x 160 mm, complete all as specified and directed.

S&F in repairs waste fittings brass chromium plated for sinks of 32 mm dia with long screwed shanks and fly-nuts flange and bedded in red lead cement and other end fixed, complete all as specified and directed.

All as per item No 105 here-in-above above but of 40 mm dia, complete all as specified and directed.

S & F in repair health faucet CP of standered quality suitable for 15mm bore, complete all as specified and directed.

S&F in repair 15 mm dia Bib tap standard of PTMT any colour screwed for iron pipe and fixed. (minimum weight 90 gms), complete all as specified and directed. (Make : Prayag or equivalent)

S&F fancy type 15mm bore chromium plated bib tap, cast copper alloy, with crutch or butterfly handle, screwed dpwn, screwed for iron pipe or for brass ferrule, complete all as directed all as directed.

Supply and fixing PVC connections 15 mm size with PTMT nuts of length 450 mm, complete all as specified and directed. (Make : Prayg or equivalent)

S & F in repair 15 mm dia Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms), complete all as specified and directed.

S&F in repair 15 mm bore fancy type pillar tap of PTMT. (Minimum weight 120 gms), complete all as specified and directed. (Make : Prayag or equivalent)

S & F in repairs 800 mm long, 40 mm dia., PVC flexible waste pipe for sinks / wash hand basins, complete all as specified and directed.

S & F in repairs 800 mm long, 32 mm dia., PVC flexible Waste pipe for sinks / wash hand basins, complete all as specified and directed.

S&F in repairs two way angular stop cock 15mm bore chromium plated, complete all as specified and directed. (Make: Jaquar/Marc)

S&F in repair Swivel shower of PTMT any colour for fixing with 15 mm pipe. (Minimum weight 40 gms), complete all as specified and directed. (Make : Prayag or equivalent)

S & F in repair Grating round 140 mm size of PTMT (Minium weight 50 gms), complete all as specified and directed.

M&L for 100mm dia cast iron nahani trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4), Complete all as specified and as directed.

S&F curtain rod 25mm dia aluminum brass polished with ends bulbs rings of required size including bracket, complete all as directed.

S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) complete all as directed.

S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms), complete all as directed.

Taking down carefully point wiring of any type, size and description from hard/ teak wood batten/through pipes/casing capping (light, fan, sockets and socket outlets etc) including removal of battens, pipes, plug sockets, socket outlets, switches, shades, ceiling roses, light fittings etc. complete and making good the disturbed surface to match with existing, complete all as directed.

Taking down carefully sub main wiring of any nos of wire and size with earth wire from wooden batten/surface conduit/casing caping complete with its all accessories, complete all as directed.

M&L for point wiring with 1100 V grade 1.5 Sq mm single core PVC insulated unsheathed FRLS cable, copper conductor multistranded passing through including concealed PVC conduit not less than 20 mm dia with concealed modular box suitable for logic modular switches , sockets , etc and logic modular white plates, sorroundings of suitable size as required at site with PVC insulated FRLS unsheathed stranded copper conductor of size 1.5 sq mm as earth wire connected to common earth dolly for one light/fan point controlled by one, one way switch single pole,complete all as specified and directed

All as per item No 124 here-in-above but for one 3 pin 5 Amps socket point on the same board, complete all as specified and directed.

All as per item No 124 here-in-above but for one 3 pin 5 Amps socket point on independent board, complete all as specified and directed.

All as per item No 124 here-in-above but for one bell/buzzer point controlled by one push button on the same board with other switches or independent, complete all as specified and directed.

All as per item No 124 here-in-above but for point wiring with 4.0 sqmm cable and 4.0 sqmm earth continuity conductor for 3 pin / 5 pin 15 Amps socket, complete all as specified and directed.

S&F modular type 25Amp power unit 4 module s Complete with 4 Module Plate, Starter, Plug & Socket, complete all as specified and directed.

S&F for modular switches 1 way 10 Amp, 1 module, complete all as specified and directed.

S&F for modular switches 1 way 16 Amp, 1 module, complete all as specified and directed.

S&F for modular bell push 6A, 1 module, complete all as specified and directed.

S&F for modular socket 6A, 2/3 pin combined 2 module, complete all as specified and directed.

S&F for modular socket 6A/16A, 2/3 pin combined 2 module, complete all as specified and directed.

S&F Modular stepped type electronic fan regulator 120 W, 2 module AC 230 volt, complete all as specified and directed.

S&F Modular USB Charger with 2 USB ports (2M) with cover plate & inner frame, Supply voltage 160-240V~ 50-60Hz, Output - 5V DC, 2A, complete all as specified and directed.

M & L Modular cover plate with inner frame 3 module, complete all as specified and directed.

M & L Modular cover plate with inner frame 4 module, complete all as specified and directed.

M & L Modular cover plate with inner frame 8 module, complete all as specified and directed.

M & L Modular cover plate with inner frame 12 module, complete all as specified and directed.

M & L ceiling rose, 3 phase/PVC/ polycarbonate, isolated body, complete all as specified and directed.

M & L for Lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

M & L for bell electric heavy duty Ding Dong type 230 volts single pole, complete all as specified and directed.

M&L for sub main wiring in repairs of two run 4.0 sqmm single core PVC insulated, unsheathed multistranded copper conductor cable FRLS 1100 Volt grade, drawn through and including PVC conduit medium duty and accessories of not less than 25 mm size (ISI marked) including all conduit accessories for concealed to the surfaces of the wall/ceiling including one run of 4.0 sqmm single core PVC insulated unsheathed copper earth continuity conductor, complete all as specified and directed. (Note : Two runs of single core cable with one run of earth continuity conductor including PVC conduit accessories shall be measured and paid as one length.) including making good disturbed surface.

S&F in repair 34W LED(4 x 1) surface mounting flat panel luminaire suitable for hanging on any surface including connecting three core cable 1.5 sqmm up to nearest point complete with separate electronic driver & high brightness LEDs white colour, complete all as specified and directed.

S & F wall mounted LED light fitting 1 x 20 Watt, 4 feet long, 220V, AC decorative box type with driver, holder including LED tube light with Color changing function with options of 3000K, 4000K & 6500K, all in one fixture including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose , complete all as specified and directed. Make : Havells Cat part No LHEXBYPNIN1W020 or equivalent in Philips / Surya / Bajaj

S & F wall mounted LED light fitting 1 x 20 Watt, 4 feet long, 220V, AC decorative box type with driver, holder including LED tube light with Innovative 20 W LED batten that works automatically through motion detection within 5 metre range & turn off within 30 seconds of non movement connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed. Make : Havells Cat part No LHEXARP7UN1W020 or equivalent in Philips / Surya / Bajaj

S & F wall mounted LED light fitting 1 x 20 Watt, 4 feet long, 220V, AC decorative box type with driver, holder including LED tube light with Inverter LED batten with square profile and polycarbonate channel. Lithium Ion battery with charging time 8hours-10 hours and back up time upto 4 hours. connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete Make : Havells Cat part No LHEXACP7FN1W020 or equivalent in Philips / Surya / Bajaj Note: An amount of Rs.32306.00 on account of credit schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S ANNI ENTERPRISE

M/S P K AGARWALA

M/S DEY ENTERPRISE

MAA TARA TRADING

M/S. KUMAR CONSTRUCTION CO.

M/S I P GROUP

M/S BIJAY KUMAR SHIVA