REPAIR TO CHAIR CB STEEL, ALMIRAHS, AND CERTAIN OTHER STEEL ITEMS AND MAINT /REPAIR OF CHARPOY GI PIPE WITH PLY TOP AT VARIOUS UNITS AT AKHNOOR UNDER GE (SOUTH) AKHNOOR.

Amount

SCHEDULE 'A' PART-I: BOQ OF WORKS FOR MAINT AND REPAIRS OF FURNITURE ITEMS STEEL FURNITURE ).

REPAIR TO CHAIR VERANDAH (FD-256 and FD-359)

Replacement of old unserviceable/ broken/ damaged cane from chair verandah, cleaning to cane holes and weaving with new cane, plastic 4.0mm wide, 0.50mm thick, half round, approved quality weaving in "Matt/ Pattern" minimum weight of cane mentioned in drawging, complete all as specified and as shown in respective drawings and as directed by Engineer-In-Charge.

Preparation of old surfaces of Chair verandah with wire brush, steel scraper and surface rubbed with sand paper to remove small scale and rust so as to obtain a clean surface and applying one coat of synthetic enamel paint of white colour as per existing specifications, complete all as specified and as shown in respective drawings and as directed by Engineer-In-Charge.

REPAIR TO ALMIRAM MEDIUM STEEL [FD-67(M), FD-1032]

eplacement of old unserviceable/ broken/ damaged mild steel brackets with new brackets of mild steel including welding in existing for fixing shelves as per existing pattern complete all as specified and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged legs with new legs made out of 1.0mm plane Galvanised iron sheet complte all as specified and shown on drawing including welding of legs, all as directed by Engineer-In-Charge.

Replacement of old existing broken/ unserviceable locks of any description and in any position with new brass locks . 75 mm with double keys,fixing with suitable screws/nuts, complete all as specified and directed by Engineer-In-Charge.

Replacement of old existing broken/ unserviceable door handles of almirah ,size 100mm long ,mild steel ,chromium plated of approved make , ISI Marked ,best quality,complete with nuts and pins , complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.

Removing of dents and old paints by burning off with blow lamp removing dents including applying one coat of putty to make surfaces even cleaning the surfaces with sand papers/scrappers and smooth and spray painting one coat of synthetic enamel olive green paint of approved quality on internal and external surfaces, complete all as specified and as directed by Engineer-In-Charge.

Preparation to old , decorated surfaces of the steel Almirah with shelves and spray painting with one coat of synthetic enamel olive green paint of approved quality on internal and external surfaces, complete all as specified and as directed by Engineer-In-Charge.

REPAIR TO ALMIRAM LARGE STEEL [FD-67(M), FD-1031]

Replacement of old unserviceable/ broken/ damaged legs with new legs made out of 1.0mm plane Galvanised iron sheet complte all as specified and shown on drawing including welding of legs, all as directed by Engineer-In-Charge.

Removing of dents and old paints by burning off with blow lamp and cleaning with scrapers complete from mild steel surface of Almirah,complete all as specified and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged mild steel brackets with new brackets of mild steel including welding in existing for fixing shelves as per existing pattern complete all as specified and as directed by Engineer-In-Charge.

Replacement of old existing broken/ unserviceable locks of any description and in any position with new brass locks . 75 mm with double keys,fixing with suitable screws/nuts, complete all as specified and directed by Engineer-In-Charge.

Replacement of old broken/unserviceable door handles of almirah ,size 100mm long ,mild steel ,chromium plated of approved make , ISI Marked ,best quality,complete with nuts and pins , complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.

Replacement of old broken/unserviceable locking device of any description and in any position with new locking device, three ways, fixing with suitable screws/nuts including repair of locking device, complete all as specified and as directed by Engineer-In-Charge.

Preparation to old , decorated surfaces of the steel Almirah with shelves and spray painting with one coat of synthetic enamel olive green paint of approved quality on internal and external surfaces, complete all as specified and as directed by Engineer-In-Charge.

REPAIR TO CHAIR CB STEEL WITH ARM OR WITHOUT ARM [FD-75(M)]

Replacement of old unserviceable/ broken/ damaged existing back frame or seat with new back frame or seat,made of Ist class hard wood duly canned canned with cane,plastic ,2mm thick of 1st quality in godrej pattern including french polish ,complete all as specified and shown on drawing and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged existing arms with arms made of 1st class of hard wood size 410 x 50 x25 mm including painting in black clour to wooden portion with two coats of synthetic enamel black paint ,complete all as specified and shown on drawing and as directed by Engineer-In-Charge.

Removing the unserviceable rubber shoes with new hard rubber shoes of best quality from the bottom of chair ,,complete all as specified and shown on drawing and as directed by Engineer-In-Charge.

Mild steel flat Iron 30 x 3 mm as stiffner under the seat ,duly welded both ends to frame fixed in repairs ,,complete all as specified and shown on drawing and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged existing PVC caps of best quality , complete all as specified and shown in the drawings and as directed by Engineer-In-Charge. Note:- PVC caps shall be approved by GE

Prepration of the existing old decorated mettalic surfaces of the chair CB steel with Arms including welding at joints as required and spray paintings one coat of synthetic enamel olive green paint of approved quality and black colour paintings to wooden handles/arms rest including prepration of surfaces ,complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.

REPAIR TO LOCKER BED SIDE STEEL (FD-1029)

Replacement of old unserviceable/ broken/ damaged existinghasp and stapple of any description and in any position with new hasp and stapple chromium plated ,size 75mm x 40mm x3mm fixing with rivets or srews /nuts , complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged existing door handle of steel lockers with new handles,mild steel chromium plated of approved make size100mm ,fixed with srews /nuts and pins , complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged existing hinges of steel locker with new hinges ,mild steel ,chromium plated of approved make,size 75mm , fixed with screws/nuts and pins or rivetted, complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged legs with new legs made out of 1.00 mm plane glavanised iron sheet ,size 100mm height and 60 mm wide including welding of legs ,complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged conduit pipe pipe with new conduit pipe ,mild steel chromium plated ,20mm dia and 1.60mm wall thickness ,complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.

Prepration of the existing old decorated surfaces of locker bed side steel by removing of all dents and filling with putty and spray painting with one coat of synthetic enamel olive green paint of approved quality on internal and external surface ,complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.

REPAIR TO TABLE DINNING (ORs) [FD-165(M)]

Replacement of old unserviceable/ broken/ damaged top from table dinning Ors with new top made of 18/19mm thick prelaminated particle board, commercial with one side teak face and teak wood edging 4.0mm thick all around the top, complete all as specified and shown on drawing and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged legs with new legs, made out of 25mm square mild steel pipe, 1.6mm thick, complete all as specified and shown on drawing and as directed by Engineer-In-Charge.

Repair and welding, to the serviceable/ broken damaged joints of legs, stiffeners, long rails and short rails, made out of 25mm square mild steel pipe, 1.6mm thick, complete all as specified and as directed by Engineer-In-Charge.

Preparation of the existing, decorated/ undecorated surfaces of Table dining ORs and spray painting with one coats of synthetic enamel black paint of approved quality, complete all as specified and directed by Engineer-In-Charge.

REPAIRS TO TABLE OFFICE CLERK STEEL [FD-84(M), FD-1004]

Replacement of old unserviceable/ broken/ damaged top with new top made of 18/19mm thick prelaminated particle board, commercial with one side teak face and teak wood beading 4.0mm thick all around the top, complete all as specified and shown on drawing and as directed by Engineer-In-Charge.

Replacement of unserviceable/ broken/ damaged old drawer of Table office clerk steel with new drawer made out of 1.0mm plane galvanised iron sheet including fixing and welding, complete all as specified and shown on drawing and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged legs with new legs, made out of 25mm square mild steel pipe, 1.6mm thick, complete all as specified and shown on drawing and as directed by Engineer-In-Charge.

Replacement of unserviceable/ broken/ damaged locks with new fix new lock for drawer, brass, 45mm size, with double keys and fixed as per existing pattern, complete all as specified and directed by Engineer-In-charge.

Preparation of the existing, decorated/ undecorated surfaces and removing denting wherever required and spray painting with one coat of synthetic enamel olive green paint of approved quality, complete all as specified and directed by Engineer-In-Charge.

REPAIRS TO TABLE OFFICE OFFICER STEEL [FD-84(M), FD-1003 and FD- 1002]

Replacement of old unserviceable/ broken/ damaged top with new top made of 18/19mm thick prelaminated particle board, commercial with one side teak face and teak wood beading 4.0mm thick all around the top, complete all as specified and shown on drawing and as directed by Engineer-In-Charge.

Replacement of unserviceable/ broken/ damaged old drawer of Table office officer steel with new drawer made out of 1.0mm plane galvanised iron sheet including fixing and welding, complete all as specified and shown on drawing and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged legs with new legs, made out of 25mm square mild steel pipe, 1.6mm thick, complete all as specified and shown on drawing and as directed by Engineer-In-Charge.

Replacement of unserviceable/ broken/ damaged locks with new lock for drawer, brass, 45mm size, with double keys and fixed as per existing pattern, complete all as specified and directed by Engineer-In-charge.

Preparation of the existing, decorated/ undecorated surfaces and removing denting wherever required and spray painting with one coat of synthetic enamel olive green paint of approved quality, complete all as specified and directed by Engineer-In-Charge.

REPAIR TO TEAPOY VERANDAH (FD-255)

Replacement of old unserviceable/ broken/ damaged top form teapoy with new top made of 18/19mm thick particle board prelaminated, one side natural teak face, exterior grade, duly covered with 4mm thick teak wood beading all around, complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged conduit pipe with new conduit pipe, mild steel, 20mm dia and 1.60mm wall thickness, in legs/ frame including cutting, welding with existing pipes, complete all as specified and shown on drawing and as directed by Engineer-In-Charge.

Preparation of the existing, decorated/ undecorated surfaces and removing denting wherever required and spray painting with one coat of synthetic enamel black paint of approved quality, complete all as specified and directed by Engineer-In-Charge.

REPAIR TO BED HARD STEEL FRAME [FD/E6/MAP/08(R)]

Replacement of unserviceable/ broken/ damaged plywood top of Bed hard with new plywood top, 12mm thick with seven Nos. of ply, commercial, BWR grade, type BB, size 1974mmx850mm, fixed with nails, complete all as specified and shown in drawing and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged existing PVC caps of best quality complete all as specified and shown on drawing and as directed by Engineer-In-Charge. Note:PVC caps shall be approved by GE.

Preparation of the existing, decorated/ undecorated surfaces and removing denting wherever required and spray painting with one coat of synthetic enamel olive green paint of approved quality, complete all as specified and directed by Engineer-In-Charge.

REPAIR TO CHARPOY WITH HARD TOP [FD/MAP-II/01]

Replacement of unserviceable/ broken/ damaged plywood top of Bed hard with new plywood top, 12mm thick with seven Nos. of ply, commercial, BWR grade, type BB, size 1930mmx850mm, fixed with nails, complete all as specified and shown in drawing and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged existing PVC caps of best quality complete all as specified and shown on drawing and as directed by Engineer-In-Charge. Note:PVC caps shall be approved by GE.

Preparation of the existing, decorated/ undecorated surfaces and removing denting wherever required and spray painting with one coat of synthetic enamel black paint of approved quality, complete all as specified and directed by Engineer-In-Charge.

REPAIRS TO TABLE 900x600x760mm WITH/ WITH OUT DRAWER (STEEL) [FD-1007, FD-1008]

Replacement of old unserviceable/ broken/ damaged top with new top made of 18/19mm thick prelaminated particle board, commercial with one side teak face and teak wood beading 4.0mm thick all around the top, complete all as specified and shown on drawing and as directed by Engineer-In-Charge.

Preparation of the existing, decorated/ undecorated surfaces and removing denting wherever required and spray painting with one coat of synthetic enamel black paint of approved quality, complete all as specified and directed by Engineer-In-Charge.

REPAIR TO CHARPOY GI PIPE 32mm DIA PLYTOP (FD-220)

Replacement of old existing unserviceable/ damaged cotton/ nylon newar from charpoy GI pipe with new plywood top following under mentioned steps, complete all as specified as directed by Engineer-In-Charge. (a) Taking out old existing unserviceable/ damaged cotton/ nylon newar from both top of charpoy GI pipe and patti/steel fastners etc. (b) Fixing 02 Nos stiffeners of mild steel angle iron 25mmx25mmx3mm, 900mm long, at equal distance and perpendicular to long rails of GI charpoy, fixing by drilling holes including counter sunk screws, nuts and washers at both ends on top side of long rails. (c) Drilling holes two Nos. of 7mm dia in each long rail, short rail and newly welded stiffener of mild steel angle iron. (d) Top of charpoy with plywood, 12mm thick with seven Nos. of ply, commercial, BWR grade, type BB, size 1980mmx900mm fixed to GI pipe frame with mild steel conter sunk screws, nuts and washers, as two Nos in each long rail, short rail and newly welded stiffeners of mild steel angle iron. (e) Painting of mild steel stiffeners with two coats of synthetic enamel paint over one coat of zinc chrome primer after preparing the surfaces. (f) Prepration of the existing old decorated surfaces of Charpoy GI pipe newar by removing of all dents and spray painting with one coat of synthetic enamel silver paint of approved quality on external surface ,complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged existing three way elbows GI from charpoy GI pipe with new three way elbows GI, 32mm bore, medium grade, (ISI marked) wherever required, complete all as specified and shown in the drawings.

Replacement of old unserviceable/ broken/ damaged existing long rails with new long rails for GI Charpoy, 32 mm bore GI pipe, medium grade, ISI marked, length as shown in drawings, complete all as specified and directed by Engineer-In-Charge. Make of pipe: Tata/ Prakash/ Jindal

Taking out old unserviceable/ broken/ damaged existing short rails from charpoy GI Pipe and replace with new short rail retrieved from damaged long rail under serial item Nos-14.03 here-in-before including cutting/ threading and fixing/ tightening in the existing charpoys including welding as required, complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.

Taking out old unserviceable/ broken/ damaged existing leg from charpoy GI Pipe and replace with new leg retrieved from damaged long/ short rail under serial item Nos- 13.03 and 13.04 here-in-before including cutting/ threading and fixing/ tightening in the existing charpoys including welding 32mm dia washer at bottom of leg as end cap and mild steel clamps as FMN set, complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged existing galvanised iron hexagonal check nut from GI Charpoy pipe with new hexagonal check nuts, 32mm bore, 6mm thick, complete all as specified and as directed by Engineer-In-Charge.

Removing of old unserviceable MS shoes 32 mm bore of legs of charpoy GI and suply and fixing of MS shoe 32 mm bore internally threaded and painted with two coated aluminium paiint over a coat of primer red oxide of all as shown on drg.

Note : Colour of polish and particle boards to Wooden Furniture shall be as approved by GE and plywood shall be bearing of Bar Code No.

Amount of Schedule of credit of for Rs1,62,258.00 shall be deducted from quoted amount.

PACHNANDA BUILDERS

PUSHPAK INDUSTRIES