86134SPECIAL REPAIR TO BLACK TOPPING AND ALLIED WORKS OF INTERNAL ROADS OF ACADEMIC BLDGS AND AFMC COMPLEX AREA OF AFMC UNDER GE (CENTRAL) PUNE.

Amount

Repairs to pot holes any depth n.exc 1 Sqm each including sweeping free from dust and mud water scoring sunken surfaces in roads, paths, etc. cutting round edges to at least 25 mm in depth and making good by filling in screened and graded road metal watering and well ramming (incl supply of metal) and making good by applying tack coat @ 10 kg per 10 Sq.m, and providing bituminous premix asphaltic semi dense concrete (design mix ) , 30 mm thick (cosolidated ) thickness with 5.5 % binder content by weight of total mix laid with mechanical paver rolled and compacted to reqired camber and gredient with 8 to 12 ton power roller cmplete all as specified and as directed .

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm, exc 50 mm and n.exc 100 mm deep complete all as specified and as directed.

M&L for premixed bituminous macadam 75 mm thick (consolidated thickness ) using 4.0 % binder content by weight of total mix ,layed /rolled compacted to reqired gredient and camber all as specified and as directed.

M&L for preparation of BM surfaces and applying evenly a tack coat of 2.5 kg /10 Sqm using Bituminous primer over prepared BM surface all as specified and as directed.

M&L for preparing existing black top surface by wire brushes for removing cacked mud etc sweeping with brooms and finally fanning the clean surface with mechanical compressure to remove all loose dust/dirt etc and applying evenly a priming/tack coat with bituminious primer VG 30 @ 5 kg per 10 Sqm on black top surface and providing bituminious premix asphaltic semi dense concrete (design mix) 30 mm thick (copnsolidated) thickness with 5.5% binder content by weight of total mix laid with mechanical paver rolled and compacted to required camber and gradient with 8 to 12 ton power roller complete all as specified and as directed.

M&L for preparation of black top or concrete surfaces of road and applying thermoplastic paint 2.0 mm thick for marking lines dashes, arrows, letters etc on road, pavements and the like exc 10 cm width, using mechanical machine white/yellow colour on road surface complete all as specified and as directed.

M&L for Moorum filling as in road side berms, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

Demolition of cement Concrete in ground floors and pavings any description % any thickness (below or above ground level) complete all as specified and as directed.

M&L Polythene film, black, 50 micron laid in floors complete all as specified and as directed.

M&L for M-40 design mix Cement concrete work in pavement , thickness of concrete 25 cm or less, mixed in a batching plant as per approved mix design, transported to site (including ready mix concrete using 400 kg per cum cement and flexural strength 40 kg per sq cm), spread, compacted and finished in a continious operation including using necessary vibrators and necessary formwork etc complete all as per specified and directed by Engr-in-Charge.

M&L for Finishing surface of concrete roads, pavements, by brooming etc complete all as specified and as directed.

M&L for Forming 12 mm thick & 200 mm deep Expansion joints filled with pre-formed bituminous filler and top 30 mm primed and sealed with sealing compound, Grade ‘A’ complete all as specified and directed.

M&L for Forming Contraction (Dummy) joints 65 mm deep x 10 mm wide, filled with sealing compound grade A complete all as specified and directed.

Dismantling of stone slab / tiles of any description or thickness laid, bedded and pointed in cement mortar in floors, hard standing, aprons etc complete all as specified and directed.

M&L 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate as in sub base complete all as specified and as directed.

M&L for PU moulded & made by table vibratory method precast concrete interlocking glossy finish paver block any shape and size of 60 mm thickness, M-35 grade chemically coloured laid over 25 mm thick stone dust including necessary formwork at edges with filling of concrete 1:2:4 type B0 complete all as specified and directed. Note : Rate includes for curved portion also.

M&L for precast coloured, chequered cement concrete tiles, glossy finish of size 300 x 300 mm x 25 mm thick, conforming to IS-1237 (2006) set jointed and pointed in neat cement slurry in floor laid over and including 20mm thick screed bed in CM (1:6) including necessary filleting in cement concrete 1:2:4 type B0 using 12.5 mm aggregate complete all as specified and as directed. Note : Rate included for curved portion.

M&L for precast cement concrete Kerb stone with PCC type-C-1 (1:3:6) using 20mm stone aggregates including weathering slightly rounded or chemfered angles or throating etc set in cement mortar (1:3) complete all as specified and as directed.

Preparation of new or old surfaces of stone, concrete or plastered surfaces of any description over 10cm girth or width, not otherwise described and applying one coat of synthetic enamel paint over a primer coat all as specified & directed by Engr-in-Charge.

S&F plastic glass Beads Reflectors Cat Eyes made of body materials ABS plastic size varying from 90 mm x 100 mm x 17 mm to 100 mm x100 mm x 20 mm reflector , fixing by epoxy chemical all as specified. Note :-Mateial shall be supplied by MES.

S&F unbreakable traffic convex mirror of dia 800 mm, fixed over & including 50 mm bore SS pipe of total length not exc 2000 mm to be fixed in ground with PCC 1:3:6 type C2 (using 20 mm graded crushed stone aggregate) in post holes of size 45 cm x 45 cm x 75 cm) depth (post holes and concrete includes in the rates) all as specified and as directed by GE)

S&F solar road stud of size 125 mm x125 mm x75 mm including shank aluminium alloy shell with 03 LED on each side with compressive strength up to 20 tonnes, fixing with epoxy complete all as specified and as directed.

S&F retro reflective sign board of size 60 cm x 90 cm or 90 cm x 60 cm (not exc 6 Sqft) regtangular or pentagonal shape, fixed both sides on board made out of aluminium composite panel (ACP) sheet 3 mm thick fixed on SS-304 series hollow tubular section, 38 mm dia of 2 mm thick. A 20 mm square tube of 1.25 mm thick of SS series 304 ( (not exc 450 mm c/c) to be fixed on both ways to support the ACP boards. The board shall be sheated with high intensity retor reflective sheet of blue colour or any colour as approved by GE, Computerised designed writting letter / figures in (Block, Roman. Itlaic style or in indian languages where required) / index hands (naturel size) / arrows/ stops/ commas/ short lines/ dashes/ hypens bracket, holograms etc where necessarry shall be made high intensity reflective sheet with in white colour letter, shape and sizes as required and approved by GE. The sign board to be supported on 1 No post of 60 mm dia and 2.5 mm to 3.0 mm thick SS pipes of SS 304 series, exc 3 m and not exc 4 m in height with round moulded design cap on top. Pipes of the boards to be fixed in ground with PCC 1:2:4 type B2 (Using 40 mm graded stone aggregate) in post holes of size 45 cm x 45 cm x 75 cm depth (Post holes and concrete includes in the rates) complete all as specified and directed by GE.

S&F retro reflective sign board of size 120 cm x 90 cm or 90 cm x 120 cm (not exc 12 Sqft) regtangular or pentagonal shape, fixed both sides on board made out of aluminium composite panel (ACP) sheet 3 mm thick fixed on SS-304 series hollow tubular section, 38 mm dia of 2 mm thick. A 20 mm square tube of 1.25 mm thick of SS series 304 ( (not exc 600 mm c/c) to be fixed on both ways to support the ACP boards. The board shall be sheated with high intensity retor reflective sheet of blue colour or any colour as approved by GE, Computerised designed writting letter / figures in (Block, Roman. Itlaic style or in indian languages where required) / index hands (naturel size) / arrows/ stops/ commas/ short lines/ dashes/ hypens bracket, holograms etc where necessarry shall be made high intensity reflective sheet with in white colour letter, shape and sizes as required and approved by GE. The sign board to be supported on 2 Nos post of 60 mm dia and 2.5 mm to 3.0 mm thick SS pipes of SS 304 series, exc 3 m and not exc 4 m in height with round moulded design cap on top. Pipes of the boards to be fixed in ground with PCC 1:2:4 type B2 (Using 40 mm graded stone aggregate) in post holes of size 45 cm x 45 cm x 75 cm depth (Post holes and concrete includes in the rates) complete all as specified and directed by GE.

All as per item No 24 here- in- above but sign board of size 180 cm x 120 cm or 120 cm x 180 cm (not exc 24 sqft) complete all as specified and as directed.

All as per item No 24 here- in- above but sign board of size 120 cm x 240 cm or 240 cm x 120 cm (not exc 32 sqft) complete all as specified and as directed.

PRASHANT CONSTRUCTION

M/s DEVRATAN ENTERPRISES