Estimate for Repair and Renovation of Rajasthan Feeder Mechanical Sub Division, Tar ghar of FCC, Dismantling of Abandoned 8 no. series Rooms. Dismantling of Old Canteen Building and Miscellaneous works

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority: Executive Engineer, Fazilka Canal & ground water Division, WRD Punjab, Ferozepur.

Name of Work: Estimate for Repair & Renovation of Rajasthan Feeder Mechanical Sub Division, Tar ghar of ferozepur canal circle, Dismantling of Abandoned 8 no. series Rooms. Dismantling of Old Canteen Building & Miscellaneous works (Aluminium Conductor Cable, Boundary Ferozepur colony complex, Borewall at workshop. wall of Ferozepur colony complex, Borewall at workshop.

Contract No: 01632 292604

Name of the Bidder/ Bidding Firm / Company :

SR No. Item Description Item Code / Make Aprox. Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

Sub Estimate for Replacing Existing Aluminium/Copper Supply Conductor with Aluminium conductor steel reinforced (ACSR) in Canal Colony Ferozepur. t1

Supply stringing and sagging of aluminium conductor steel reinforced (ACSR) on poles including binding with insulators using aluminium wires complete as desired by the Engineer in charge of the site:- ACSR-WEASEL conductor (30 sq. mm) Size (6/2.55 Al.+1/2.55mm GI) t2 Mtr Excess(+) Full Conversion INR

Sub Estimate For the construction of Boundary wall around Ferozepur Canal Colony Office Complex. t3

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. B Mechanical Means (a) Depth upto 3m t4 Cum Excess(+) Full Conversion INR

CONCRETE :- Cement concrete 1:4:8 (a) with brick balast 40mm gauge (i) mixing by manual means t5 Cum Excess(+) Full Conversion INR

Supply and installation precast boundary wall (M-30) i/c Execution and concreting of Pillar and complete in all respect. t6 Sqft Excess(+) Full Conversion INR

Sub Estimate for Boring with casing pipe for Tubewell at Workshop in Canal Colony Ferozepur. t7

Boring with casing pipe for tubewell in all soils except ordinary hard rocks requiring blasting including removing the casing pipe after the tube well is lowered & tested , equipment as required such as hand boring machine and its accessory, transportation to site and vice versa etc. complete in all respect. (d) Boring with 300mm id Housing Pipe Upto 150 m depth BGL. Bore Length = 130 Mtr t8 Mtr Excess(+) Full Conversion INR

Supplying, assembling, lowering and fixing in vertical position in bore well,unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818-2010, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer – incharge. (c) 200 mm nominal size dia. t9 Mtr Excess(+) Full Conversion INR

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS:12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in- charge. 200 mm nominal size dia. t10 Mtr Excess(+) Full Conversion INR

Supplying & Fixing of bail plug of M.S pipe complete with inverted U-hook attched to the bottom plug complete in all respect. (c) 200mm internal diameter (weight 41.6 kg per metre) 8.0 mm thickness t11 Mtr Excess(+) Full Conversion INR

Jointing P.V.C. /H.D.P.E pipes and specials with PVC coupling and cement solvent excluding the cost of PVC coupling and cement solvent, including testing etc. complete in all respect 200mm internal diameter t12 Each Excess(+) Full Conversion INR

Supplying & fixing of M.S Clamp of size 150mm X 12mm made out of MS Flat 1.52m long, suitable to fit Housing pipe including the cost Nut & Bolts of Suitable size complete in all respect. t13 Each Excess(+) Full Conversion INR

Development and Stabilizing of the tubewell with air compressor of required capacity as directed by the engineer-in- charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge. (b) Capacity of Air compressor 500 cfm at 150 PSI t14 Hour Excess(+) Full Conversion INR

Development and Stabilizing of the tubewell with submersible pump of required capacity as directed by the engineer-in- charge including cost of tools, ppliances & consumable to the satisfaction of Engineer-incharge. t15 Hour Excess(+) Full Conversion INR

Supply and erection of PVC insulated PVC sheathed (3 core) round flexible wire with copper conductor (FR) cable (ISI marked) confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 4.0sq.mm (84/0.3mm), 3Core t16 Mtr Excess(+) Full Conversion INR

Providing,Laying, fixing&jointingof P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. 110mm o/d pipe of 10kgf/sqcm t17 Mtr Excess(+) Full Conversion INR

Sub Estimate for Repair & Renovation of Mechanical Sub Division in Canal Colony Ferozepur. t18

Dismantling roofing (a)First class mud roofing t19 sqm Excess(+) Full Conversion INR

Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. A)Doors of Area 3 Sqm and Below t20 No Excess(+) Full Conversion INR

Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. B) Windows of Area 3 Sqm and Below t21 No Excess(+) Full Conversion INR

Dismantling Brick Work Tile, Masonry or Tile Lining IN Cement t22 cum Excess(+) Full Conversion INR

Scraping Colour / White Wash (Interior) t23 sqm Excess(+) Full Conversion INR

Scraping Colour Wash and White wash (Exterior) t24 sqm Excess(+) Full Conversion INR

Scraping Cement Plaster (Interior) t25 sqm Excess(+) Full Conversion INR

Scraping Cement Plaster (Exterior) t26 sqm Excess(+) Full Conversion INR

Dismantling brick or flagged stone flooring including concrete base t27 sqm Excess(+) Full Conversion INR

Earth work in Excavation in foundation trenched etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing if bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonary in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. t28 cum Excess(+) Full Conversion INR

Cement Concrete 1:8:16 with stone ballast 20 mm gauge in foundation and plinth (ii) mixing by mechanical means using concrete mixer volumetric type t29 cum Excess(+) Full Conversion INR

First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth level. t30 cum Excess(+) Full Conversion INR

Damp proof course 4cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded t31 sqm Excess(+) Full Conversion INR

First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level. t32 cum Excess(+) Full Conversion INR

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. t33 sqm Excess(+) Full Conversion INR

Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge welded conduit pipe 20mm/ 25mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1½" deep for walls and 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):-(i) a Wiring fan point (With fan box) t34 Each Excess(+) Full Conversion INR

Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge welded conduit pipe 20mm/ 25mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1½" deep for walls and 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):-(ii) Wiring light point t35 Each Excess(+) Full Conversion INR

Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge welded conduit pipe 20mm/ 25mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1½" deep for walls and 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):-(iii) Wiring call-bell point t36 Each Excess(+) Full Conversion INR

Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge welded conduit pipe 20mm/ 25mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1½" deep for walls and 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):-(iv) Wiring 6Amp. wall socket point t37 Each Excess(+) Full Conversion INR

Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge welded conduit pipe 20mm/ 25mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1½" deep for walls and 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):-(vi) Wiring 16/20Amp. power plug control point t38 Each Excess(+) Full Conversion INR

Wiring Computer supply terminal points recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10/16/20Amp. Switches and blanking plate etc., and covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):-(b) Wiring Computer terminal point having 2 Nos. 6Amp. 2/3 universal socket (shuttered), 1No. 16/20Amp. universal Socket (shuttered) and 2Nos. 16/20Amp. switch with indicator (Modular accessories). t39 Each Excess(+) Full Conversion INR

SUPPLY AND ERECTION OF WIRING ACCESSORIES: Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.:-Ceiling Rose (Flush Piano type) t40 Each Excess(+) Full Conversion INR

SUPPLY AND ERECTION OF WIRING ACCESSORIES: Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.:-Call Bell 220/230 volts AC Ding Dong t41 Each Excess(+) Full Conversion INR

SUPPLY AND ERECTION OF WIRING ACCESSORIES: Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.:-One Way 6amp. Switch Flush Piano type t42 Each Excess(+) Full Conversion INR

SUPPLY AND ERECTION OF WIRING ACCESSORIES: Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.:-5pin 6amp. Wall Socket Flush Piano type t43 Each Excess(+) Full Conversion INR

SUPPLY AND ERECTION OF WIRING ACCESSORIES: Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.:-16amp. Universal Wall Socket Flush Piano type t44 Each Excess(+) Full Conversion INR

SUPPLY AND ERECTION OF WIRING ACCESSORIES: Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.:-Single Pole 16/20amp. Switch with indicator Flush Piano type t45 Each Excess(+) Full Conversion INR

Supply and erection of Concealed Metal Boxes of various sizes (1/2M, 3M, 4M, 6M, 8M, 12M, 16/18M) with brass lugs recessed in wall for mounting modular accessories including fixing and other petty material etc., including the cost of cutting and filling up of chases (with finishing the surface):-Powder Coated Concealed Metal Box with Brass Lugs four Module t46 Each Excess(+) Full Conversion INR

Supply and erection of Concealed Metal Boxes of various sizes (1/2M, 3M, 4M, 6M, 8M, 12M, 16/18M) with brass lugs recessed in wall for mounting modular accessories including fixing and other petty material etc., including the cost of cutting and filling up of chases (with finishing the surface):-Powder Coated Concealed Metal Box with Brass Lugs Six Module t47 Each Excess(+) Full Conversion INR

Supply and erection of Concealed Metal Boxes of various sizes (1/2M, 3M, 4M, 6M, 8M, 12M, 16/18M) with brass lugs recessed in wall for mounting modular accessories including fixing and other petty material etc., including the cost of cutting and filling up of chases (with finishing the surface):-Powder Coated Concealed Metal Box with Brass Lugs Eight Module t48 Each Excess(+) Full Conversion INR

Supply and erection of Concealed Metal Boxes of various sizes (1/2M, 3M, 4M, 6M, 8M, 12M, 16/18M) with brass lugs recessed in wall for mounting modular accessories including fixing and other petty material etc., including the cost of cutting and filling up of chases (with finishing the surface):-Powder Coated Concealed Metal Box with Brass Lugs Twelve Module t49 Each Excess(+) Full Conversion INR

Supply and erection of Plastic surface boxes of various sizes (1/2M, 3M, 4M, 6M, 8M, 12M) on surface on wall for mounting modular accessories including fixing and other petty material etc.:-Plastic Surface Box for Modular Accessories Four Module t50 Each Excess(+) Full Conversion INR

Supply and erection of Plastic surface boxes of various sizes (1/2M, 3M, 4M, 6M, 8M, 12M) on surface on wall for mounting modular accessories including fixing and other petty material etc.:-Plastic Surface Box for Modular Accessories Six Module t51 Each Excess(+) Full Conversion INR

Supply and erection of Plastic surface boxes of various sizes (1/2M, 3M, 4M, 6M, 8M, 12M) on surface on wall for mounting modular accessories including fixing and other petty material etc.:-Plastic Surface Box for Modular Accessories eight Module t52 Each Excess(+) Full Conversion INR

Supply and erection of Plastic surface boxes of various sizes (1/2M, 3M, 4M, 6M, 8M, 12M) on surface on wall for mounting modular accessories including fixing and other petty material etc.:-Plastic Surface Box for Modular Accessories twelve Module t53 Each Excess(+) Full Conversion INR

MINIATURE CIRCUIT BREAKERS: Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-MCB Single Pole 6-32amp. (10kA, Curve-C) t54 Each Excess(+) Full Conversion INR

MINIATURE CIRCUIT BREAKERS: Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-MCB Double Pole 6-32amp. (10kA, CurveC) t55 Each Excess(+) Full Conversion INR

SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's: (i)SP&N Double Door Distribution Board 16 way Each t56 Each Excess(+) Full Conversion INR

Erection of Ceiling/ Cabin/ Exhaust fan having connection with PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75sq.mm complete:- t57 Each Excess(+) Full Conversion INR

Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc t58 M Excess(+) Full Conversion INR

PVC INSULATED SINGLE CORE FR COPPER CONDUCTOR CABLE: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 1sq.mm (Un-sheathed) t59 M Excess(+) Full Conversion INR

PVC INSULATED SINGLE CORE FR COPPER CONDUCTOR CABLE: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 1.5sq.mm (Un-sheathed) t60 M Excess(+) Full Conversion INR

PVC INSULATED SINGLE CORE FR COPPER CONDUCTOR CABLE: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 2.5sq.mm (Un-sheathed) t61 M Excess(+) Full Conversion INR

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. t62 cum Excess(+) Full Conversion INR

Cold twisted deformed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete t63 qtl Excess(+) Full Conversion INR

Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing t64 sqm Excess(+) Full Conversion INR

Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16 t65 Nos. Excess(+) Full Conversion INR

Bottom khurra on ground 1.2m 0.6m consisting of bricks on edge laid in cement mortar 1:3 over 7.5 cm cement concret 1:8:16 including 12.5mm thick cement plaster 1:3 t66 Nos. Excess(+) Full Conversion INR

Providing and Fixing 110 mm dia. U.P.V.C Rain Water Pipe of 4 kgf./sqm as per IS: 4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in-charge. t67 M Excess(+) Full Conversion INR

Providing and Fixing 110 mm dia SWR U.P.V.C bend for rain water pipe as per IS: 14735 including jointing complete as per specification of Engineer-in-charge t68 Nos. Excess(+) Full Conversion INR

Supplying and fixing of Japani sheet frames (Chowkat) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section (standard design latest), including iron lugs (hold fasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiving tower bolts and finished, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete to the satisfaction of Engineer-in-charge. t69 M Excess(+) Full Conversion INR

Supplying and fixing of Japani sheet frames (Chowkat) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section (standard design latest), including iron lugs (hold fasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiving tower bolts and finished, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete to the satisfaction of Engineer-in-charge. t70 M Excess(+) Full Conversion INR

Hollock wood Doors shutter windowsshutter including hinges,screws, chocks, cheats, stops cords etc. complete fixed in position(a) Panelled, glazed or glazed and panelled. (ii) 35 mm thick t71 sqm Excess(+) Full Conversion INR

Wire gauze deodar wood door shutter without springs housed in chowkats 35 mm thick t72 sqm Excess(+) Full Conversion INR

Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position Commercial with elm or gurjan facing on both / Sides with laminated core and lipped edges35 mm thick t73 sqm Excess(+) Full Conversion INR

Providing & fixing 8" stainless steel tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge. t74 No Excess(+) Full Conversion INR

Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt) Fore shutter area above 0.50 sqm t75 sqm Excess(+) Full Conversion INR

Curtain rod 25mm dia aluminum pipe with brackets fixed in position including nails and screws etc. (Deodar Wood) t76 M Excess(+) Full Conversion INR

Tailoring of curtains t77 M Excess(+) Full Conversion INR

Providing and fixing steel rings chromeplated 3.80 cm. dia. for curtains. (Market Rate) t78 Each Excess(+) Full Conversion INR

12.5 mm thick cement plaster 1:4 t79 sqm Excess(+) Full Conversion INR

Preparation of plastered or concrete surface for painting (including sand papering the surface) using Acryllic Wall Putty by applying two or more coats to get required finish including priming coat to make an even surface before applying Acrylic wall putty on new plastered surface.Complete as per specifications t80 sqm Excess(+) Full Conversion INR

Wall painting with (bio grade)plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) Generally used in hospital buildings etc Complete as per Specifications. t81 sqm Excess(+) Full Conversion INR

Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete t82 sqm Excess(+) Full Conversion INR

Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc t83 sqm Excess(+) Full Conversion INR

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade t84 sqm Excess(+) Full Conversion INR

Base course of floor consisting of 100 mm thick cement concrete 1:8:16 with stone aggregate 40mm gauge & 100 mm fine sand filling using mechanical mixer for mixing of material t85 sqm Excess(+) Full Conversion INR

Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. 600 x 600 mm t86 sqm Excess(+) Full Conversion INR

Grouting the joints of flooring tiles having joints of 3 mm width, using 2mm to 3 mm gap using spacers and later this gap to be filled with cement based grout ) with Cement base grout and matching pigments etc., complete, including filling / grouting and finishing complete as per direction of Engineer-in-charge. t87 sqm Excess(+) Full Conversion INR

Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading. t88 sqm Excess(+) Full Conversion INR

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. t89 sqm Excess(+) Full Conversion INR

Providing and laying 60 mm thick factory made cement concrete interlocking Paving blocks of M35 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63 -2014 and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-inCharge t90 sqm Excess(+) Full Conversion INR

Supply and installation of garden bench (a) Chair type garden bench with L-shaped sides made of reinforced concrete (M30), thickness 100 mm, overall height 1000 mm, base width 620 mm. Back and seat shall consist of 5 Nos. reinforced concrete planks 1500 mm x 100 mm x 50 mm one plank 1500 mm x 200 mm x 50 mm. Seating height of the bench shall be 450 mm. The bench shall be fixed with nuts on concrete mount, all holes sealed after assembly and installation t91 No Excess(+) Full Conversion INR

Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete (c) I.S.I Designation No. III (size of door 851mm to 1000mm) t92 No Excess(+) Full Conversion INR

Providing and fixing in position stainless steel sink (to the approval of Engineer-in-charge) 1mm thick,grade-304 complete in all respect. Size555mmx475mmx200mm t93 Each Excess(+) Full Conversion INR

Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. t94 Each Excess(+) Full Conversion INR

Providing and fixing Jet Spray with 2'-6'' long PVC pipe With CP brass nut. t95 Each Excess(+) Full Conversion INR

Providing and fixing in position vitreous Chinaware white lIndian make large flat back or angular lipped front urinal 375 x 390 x 590 mm of approved make (to the approval of the Engineer-in-charge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75 mm , C.P. brass Urinal Spreader Ocular-Regular and C.P. brass tube connection 300 mm long complete t96 Each Excess(+) Full Conversion INR

Providing and fixing partitions for different type of urinals Vitreous white Chinaware Partition Small partitions size 69 x 16.5 x 32.5 cm t97 Each Excess(+) Full Conversion INR

Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mmdia with one C.P. brasspillar tapincludingRackBoltScrew Pair115mmlongcomplete in all respect. (Make - Cera, Hindware,Parryware) Size 550mmx400mmx815mm t98 Each Excess(+) Full Conversion INR

Providing and fixing in position 5mm thick beveled edge mirrorof superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm C.P brass screws and washer sand S/S studs on top complete in all respect (as required by the engineer in- charge) Size 550 x 400 mm t99 Each Excess(+) Full Conversion INR

Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect.. t100 Each Excess(+) Full Conversion INR

Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect. t101 Each Excess(+) Full Conversion INR

Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-Charge) fixed in with rawl plugs embedded in walls with brass screws, complete inall respects. (b)CP brass towel rail 15mm dia 600mm long. t102 Each Excess(+) Full Conversion INR

Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge ) complete in all respect. C.P. brass Bib cock foam flow without flange t103 Each Excess(+) Full Conversion INR

Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect. C.P. brass 15mm concealed stop cock with flange t104 Each Excess(+) Full Conversion INR

Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect. C.P. brass 15mm angle valve without flange. t105 Each Excess(+) Full Conversion INR

P/F in position PVC flexible tube connection of approved make (to the approval of Engineer-in-Charge) Complete in all respect. PVC tube connection of size 15mmx 450mm with CP brass nut. t106 Each Excess(+) Full Conversion INR

Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. Triple Layer Tanks t107 Litre Excess(+) Full Conversion INR

Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. Single Socket Type A 110mm o/d single socket SWR UPVC pipe lines laid complete t108 M Excess(+) Full Conversion INR

Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. Single Socket Type A 75mm o/d single socket SWR UPVC pipe lines laid complete t109 M Excess(+) Full Conversion INR

Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. For 110 mm i/d pipes Elbow 90 Degree (All side socketed) t110 Each Excess(+) Full Conversion INR

Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. Single Tee With Door t111 Each Excess(+) Full Conversion INR

Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. Single Tee t112 Each Excess(+) Full Conversion INR

Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. P Trap/Floor Trap 110mm x 75mm t113 Each Excess(+) Full Conversion INR

Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. Door Elbow 90 degree (all side socket) t114 Each Excess(+) Full Conversion INR

Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. For 75mm i/d pipes Single Tee t115 Each Excess(+) Full Conversion INR

Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. For 75mm i/d pipes Door elbow 90 degree (all side socket) t116 Each Excess(+) Full Conversion INR

Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. For 75mm i/d pipes Elbow 90 degree (all side socket) t117 Each Excess(+) Full Conversion INR

Providing and fixing in position gully trapsfixed in cement concrete 1:4:8 complete with Grating 150mmx 150mm, cover and frame clear opening 300mmx 300mmandout of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping a round coverand frame etc. as perstandard design minimum depth of water should be 150 mm with a minimum seal 50mm. 100mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm t118 No Excess(+) Full Conversion INR

Providing, laying, jointing, fixing and testing ISI Marked uPVC Pipe with G.I. specialsas per ISI-4985, includingcost of G.I. specials such as tees, bends, sockets, elbows etc. testing inside building complete. uPVC Pipe 6 Kgf/cm2 50mm i/d t119 M Excess(+) Full Conversion INR

CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge. CPVC SDR 11 Pipe & fitting 25mm o/d t120 M Excess(+) Full Conversion INR

Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes lines and making good the same to its original condition. Size 75mm x 75mm t121 M Excess(+) Full Conversion INR

Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required. Through wall 22.86 cm thick t122 No Excess(+) Full Conversion INR

Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the pproval of Engineer-incharge )with various fixtures complete in all respect. C.P. Brass extension piece, 25mm longto 50mm long t123 Each Excess(+) Full Conversion INR

Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect. t124 No Excess(+) Full Conversion INR

Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect. G.I. tank nipple 25mm i/d t125 Each Excess(+) Full Conversion INR

Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme,Finolex, Kissan, Jain, Princeor equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same makeas that of pipes) complete in all respects. 160mm o/d pipes t126 M Excess(+) Full Conversion INR

Providing & fixing in position Water Cooler without Stablizer of approved make (to the approval of Engineer-in-charge ) including carriage complete in all respect.d) Water Cooler Full Steel Body 150/150 ltr without Stablizer t127 No Excess(+) Full Conversion INR

AUTOMATIC VOLTAGE STABLIZER: Supply and erection of Single phase copper wound Automatic voltage stablizer of suitable capacity electronically controlled circuit with input voltage 140-260 volts single phase AC supply and output voltage 220 ± 5% volts single phase AC supply having main silicon core copper wound step up transformer with suitable nos. of turns on primary side and secondary side the transformer should be fully insulated inside the MS sheet box of suitable size. There should be power control relay and single pole MCB (C-curve, 10kA) of suitable capacity complete with internal copper wiring along with amp. meter and volt meter, high voltage cut off 280 volt input (240 volt output) and 90 volt maximum boost and overloading protection to be provided:- (ii) Automatic Voltage Stablizer 3 KVA t128 No Excess(+) Full Conversion INR

Making soak pit 2.5mouter Diametre 3.0 metre deep 230mm thick 1:5 brick work honeycombwithbricksof IstClassandS.W. drain pipe 100mmDiametre, 1.8m long complete as per standard design. With F.P.S. bricks t129 Each Excess(+) Full Conversion INR

Supply of 1/2 HP water Pump t130 No Excess(+) Full Conversion INR

Supply of Refrigrator 300 ltr.(Voltas) t131 No Excess(+) Full Conversion INR

Ro filter with installation complete t132 No Excess(+) Full Conversion INR

Sub Estimate for construction of new Public/Common Canteen in Canal Colony Office Complex Ferozepur. t133

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. t134 cum Excess(+) Full Conversion INR

Cement concrete 1:8:16 With stone aggregates 20mm gauge i) mixing by manual means t135 cum Excess(+) Full Conversion INR

Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels t136 sqm Excess(+) Full Conversion INR

Centering and shuttering for columns (circular or curved in plain) t137 sqm Excess(+) Full Conversion INR

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. t138 sqm Excess(+) Full Conversion INR

First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth t139 cum Excess(+) Full Conversion INR

Damp proof course 4 cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded t140 sqm Excess(+) Full Conversion INR

First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level t141 cum Excess(+) Full Conversion INR

Cold twisted deformed (ribbed/ tor steel) Bars (Fe 500 grade as per IS 1786-1985) for R.C.C. works, where not included in the complete rate of R.C.C. including bending, binding, and placing in position complete. t142 qtl Excess(+) Full Conversion INR

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. t143 cum Excess(+) Full Conversion INR

Supplying and fixing of Japani sheet frames (Chowkhat) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section (standard design latest), including iron lugs (hold fasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiving tower bolts and finished, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete to the satisfaction of Engineer-in-charge. Doors and windows frame of size 113mm x 60mm with 35 mm wide single rebate . t144 Running meter Excess(+) Full Conversion INR

Providing & Fixing glass panes with nails and putty or wooden strip complete in all respect b) Glazing area above 0.09 sqm (iii) 5.0mm thick Plate glass (INDIAN) t145 sqm Excess(+) Full Conversion INR

Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including twocoats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing t146 sqm Excess(+) Full Conversion INR

Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16. t147 Nos. Excess(+) Full Conversion INR

Bottom khurra on ground 1.2m 0.6m consisting of bricks on edge laid in cement mortar 1:3 over 7.5 cm cement concret 1:8:16 including 12.5mm thick cement plaster 1:3 t148 Nos. Excess(+) Full Conversion INR

Excavation of Soil using Hyraulic Excavator and hydraulic Tractor Trolly I/C cutting and loading in Trolly and transporting to the embankment locations with all lifts and leads excluding royality t149 cum Excess(+) Full Conversion INR

Compaction, Extra for laying earth/fly ash as per specifications in 20 cm. Layers and dressing but excluding cost of rolling. Extra for watering the earth/fly ash laid in 20 cm layers as per specifications for compaction. Extra for rolling to specifications. t150 cum Excess(+) Full Conversion INR

Base course of floor consisting of 100 mm thick cement concrete 1:8:16 with stone aggregate 40mm gauge and 100 mm fine sand filling using mechanical mixer for mixing of material t151 sqm Excess(+) Full Conversion INR

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in- Charg in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. t152 sqm Excess(+) Full Conversion INR

Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading. t153 sqm Excess(+) Full Conversion INR

Supply and installation of garden bench Chair type garden bench with L-shaped sides made of reinforced concrete (M- 30), thickness 100 mm, overall height 1000 mm, base width 620 mm. Back and seat shall consist of 5 Nos. reinforced concrete planks 1500 mm x 100 mm x 50 mm one plank 1500 mm x 200 mm x 50 mm. Seating height of the bench shall be 450 mm. The bench shall be fixed with nuts on concrete mount, all holes sealed after assembly and installation t154 Each Excess(+) Full Conversion INR

Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position 35mm thick (Code :IS 2202-1(1999) t155 sqm Excess(+) Full Conversion INR

Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt) For shutter area above 0.50 sqm t156 sqm Excess(+) Full Conversion INR

Providing & Fixing decorative high pressure laminated sheet 1mm SF thick with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S,including cost of adhesive of approved quality. t157 sqm Excess(+) Full Conversion INR

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibrohydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge (IS Code:15658 (2006) t158 sqm Excess(+) Full Conversion INR

Precast Cement Concrete Kerb a) Providing and laying factory made rubber moulded smooth finish cement concrete Kerb M-20 grade 250mm high with bottom width 165mm and top width 115mm made over strong vibratory table and fixing with cement mortar 1:2 as per MORT&H specifications t159 Mtr Excess(+) Full Conversion INR

12.5 mm thick cement plaster 1:4 t160 sqm Excess(+) Full Conversion INR

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish t161 sqm Excess(+) Full Conversion INR

Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified. t162 Running meter Excess(+) Full Conversion INR

Finishing walls with cement based water soluble exterior paint such as snowcem, robbiacem etc. two or more coats to give aneven shade t163 sqm Excess(+) Full Conversion INR

providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and Lshape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. (ii With fully perforated 12 mm thick micro tegular edged or 10 mm thick square edged GRG false ceiling tiles. t164 sqm Excess(+) Full Conversion INR

Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 4 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge. t165 Mtr Excess(+) Full Conversion INR

Providing and fixing 110 mm dia SWR U.P.V.C bend for Rain water pipe as per IS: 14735 including jointing complete as per specification of Engineer-in charge. t166 Nos. Excess(+) Full Conversion INR

Providing and fixing H.C.I. Floor traps conforming to I.S.I. Specification of reputed firm of the self cleaning design with S.S. grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors,etc. t167 Each Excess(+) Full Conversion INR

CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-inCharge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge. (b) SDR 11 CPVC pipes & fittings 20mm o/d t168 Mtr Excess(+) Full Conversion INR

CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-inCharge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge. (c ) CPVC SDR 11 Pipe & fitting 25mm o/d t169 Mtr Excess(+) Full Conversion INR

Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. (b) PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut t170 Each Excess(+) Full Conversion INR

Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer - in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and base support for tank. Triple Layer Tanks t171 Litre Excess(+) Full Conversion INR

Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-incharge) in PVC Water storage tanks complete in all respect G.I. tank nipple 25mm i/d t172 Each Excess(+) Full Conversion INR

Providing and fixing in position automatic brass Ball Cock in tanks (b) Brass Ball Cock with rod and Plastic Ball of 25mm i/d t173 Each Excess(+) Full Conversion INR

Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. t174 Each Excess(+) Full Conversion INR

Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tapincluding Rack Bolt Screw Pair 115mm long complete in all respect. (ii) Size 550 mm x 400 mm x 815 mm t175 Each Excess(+) Full Conversion INR

Providing and fixing PVC waste pipe Collapsiable 32mm complete in all respect. t176 Each Excess(+) Full Conversion INR

Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect.Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect.Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. a) PVC tube connection of size 15 mm x 300 mm with C.P. Brass nut t177 Each Excess(+) Full Conversion INR

Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect. c ) C.P brass 15mm Angle valve without flange t178 Each Excess(+) Full Conversion INR

Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect. ( b) C.P.brass 15mm Concealed stop cock with flange. t179 Each Excess(+) Full Conversion INR

Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other eputed firm including cutting, jointing, wastage, but excluding cost of jointing. Single Socket Type A (b)110mm o/d single socket SWR UPVC pipe lines laid complete t180 Mtr Excess(+) Full Conversion INR

Providing and fixing in position SWR UPVC special forsoil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. (B) For 110mm o/d pipes (vi) Vent Cowls t181 Each Excess(+) Full Conversion INR

Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. (B) For 110mm o/d pipes (xvii) Nahani trap without jali 110mmx110mm t182 Each Excess(+) Full Conversion INR

Providing and fixing in position C.P. brass Tumbler Holder of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect t183 Each Excess(+) Full Conversion INR

Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect. t184 Each Excess(+) Full Conversion INR

Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) b) Size 550mmx400mm t185 Each Excess(+) Full Conversion INR

Providing & Fixing in position C.P./Aluminium Khunti of approved make (to the approval of Engineer-in-charge ) fixed into wall with C.P. brass screws and rawl plugs etc. complete in all respect. (f) Aluminium khunti with 6 pegs t186 Each Excess(+) Full Conversion INR

Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect. t187 Each Excess(+) Full Conversion INR

Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-in-charge )with various fixtures complete in all respect. 25 mm long to 50 mm long t188 Each Excess(+) Full Conversion INR

Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick,grade-304 (18/8) with waste coupling complete in all respect. (d) Double bowl Sink without drain board Overall size 1114 x 490 mm with bowl size 460x385x200mm including waste coupling t189 Each Excess(+) Full Conversion INR

Providing & fixing in postion C.P. brass Sink Cock with swinging spout (wall mounted) of approved make (to the approval of Engineerin- charge) complete in all respect. t190 Each Excess(+) Full Conversion INR

Providing & fixing in position Commercial RO without reservoir with four no cartridge/ membrane having flow rate 50 ltr/hr with 6 stage purification process of approved make (to the approval of Engineer-in-charge ) including carriage and fixing in position complete in all respect. t191 Each Excess(+) Full Conversion INR

Providing & fixing in position UV filter having flow rate 200 ltr/hr with 3 stage purification process having 16 watt UV lamp and 35 Watt power rating of approved make (to the approval of Engineer-in-charge ) including carriage and fixing in position complete in all respect t192 Each Excess(+) Full Conversion INR

Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.,:- (xvi)16/20amp. Universal Modular Shuttered Socket (two Module) t193 Each Excess(+) Full Conversion INR

Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.,:- (xi) 6/10amp. One Way Modular Switch (One Module) t194 Each Excess(+) Full Conversion INR

Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.,:- (xix) Step type Modular Electronic Fan Regulator 100watts (Two Module) t195 Each Excess(+) Full Conversion INR

Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.,:- (xxiv) Modular MCB 20Amp. (Two Module) t196 Each Excess(+) Full Conversion INR

Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.,:- (xxvii) Bakelite Batten Holder (Large size) t197 Each Excess(+) Full Conversion INR

Supply and erection of Modular Cover Frame (Complete set) on the existing metal box including fixing and connection of existing switches and sockets and other petty material etc:- e) Modular Cover Frame Eight Module t198 Each Excess(+) Full Conversion INR

PLASTIC DISTRIBUTION BOARDS: Supply and erection of Plastic enclosure DB's of various sizes on surface on wall for mounting MCB's SP/ DP/ FP including fixing and other petty material etc.:- a) Plastic enclosure MCB DB 2 way t199 Each Excess(+) Full Conversion INR

Supply and erection of Concealed Metal Boxes of various sizes (1/2M, 3M, 4M, 6M, 8M, 12M, 16/18M) with brass lugs recessed in wall for mounting modular accessories including fixing and other petty material etc., including the cost of cutting and filling up of chases (with finishing the surface):- e) Powder Coated Concealed Metal Box with Brass Lugs Eight Module t200 Each Excess(+) Full Conversion INR

Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect asdesired by the Engineer-in-charge:- (ii Overall size 1.5sq.mm (Un-sheathed) t201 Mtr Excess(+) Full Conversion INR

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- (ii) Wiring light point t202 Each Excess(+) Full Conversion INR

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- (v) Wiring 6 Amp. Plug control comprising wall socket point t203 Each Excess(+) Full Conversion INR

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- (i) b Wiring fan point (With fan box) t204 Each Excess(+) Full Conversion INR

Supply of 0.5 H.P Monoblock Pump including 18 % GST t205 Each Excess(+) Full Conversion INR

Supply of reputed brand electric Electric Ceiling Type Fan 1200 mm, 3 Star t206 Each Excess(+) Full Conversion INR

Provide water cooler for public/staff drinking purpose t207 Each Excess(+) Full Conversion INR

Provide chairs for public/staff sitting purpose t208 Each Excess(+) Full Conversion INR

Sub Estimate For Dismantling of Abandoned Revenue Building/Series of 8 Rooms. t209

Stripping and stacking slate or tiles of a roof. t210 sqm Excess(+) Full Conversion INR

Add for planks and battens ssame as above item t211 sqm Excess(+) Full Conversion INR

Dismantling cement brick work tile, masonry or tile t212 cum Excess(+) Full Conversion INR

Dismantling cement conglomerate floors 25mm to 50mm thick including concrete base. t213 sqm Excess(+) Full Conversion INR

Site Clearance, Surface dressing of ground including removing rank vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m in all kinds of soil. t214 sqm Excess(+) Full Conversion INR

Sub Estimate For Dismantling of Old Canteen Building. t215

Stripping and stacking iron sheets of a roof including ridging, flashing, eaves boards gutters and down pipes. t216 sqm Excess(+) Full Conversion INR

Add for roof trusses of iron or wood, (rafters, purling etc.) in case of item Nos. 8.10 and 8.11. t217 sqm Excess(+) Full Conversion INR

Dismantling cement brick work tile, masonry or tile lining t218 cum Excess(+) Full Conversion INR

Dismantling cement conglomerate floors 25mm to 50mm thick including concrete base. t219 sqm Excess(+) Full Conversion INR

Dismantling Reinforced cement concrete t220 cum Excess(+) Full Conversion INR

Site Clearance, Surface dressing of ground including removing rank vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m in all kinds of soil. t221 sqm Excess(+) Full Conversion INR

Sub Estimate For Sewerage System, Tile Terracing and miscellaneous repair works of Residential Quarters in Canal Colony Ferozepur. t222

Terracing consiting of tiles 22.86x11.43x 3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing. t223 sqm Excess(+) Full Conversion INR

Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16 t224 Nos. Excess(+) Full Conversion INR

Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified. t225 Mtr Excess(+) Full Conversion INR

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres t226 cum Excess(+) Full Conversion INR

Dismantling Concrete Reinforced cement concrete t227 cum Excess(+) Full Conversion INR

Dismantling existing drains of different size cunnets, section only excluding recovery of all useable materials, stacking the same within 100 metre from site of dismantled works and disposal of all rubish off site of works. House connection drains. t228 M Excess(+) Full Conversion INR

Cement concrete 1:2:4 mixing by mechanical means using concrete mixer volumetric type with stone ballast 20mm gauge With stone ballast or shingle mixing by manual means t229 cum Excess(+) Full Conversion INR

Centring and shuttering for parapet, fascias and other similar items including edges t230 sqm Excess(+) Full Conversion INR

First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth t231 cum Excess(+) Full Conversion INR

12.5 mm thick cement plaster 1:4 t232 sqm Excess(+) Full Conversion INR

Cement Rendering on plaster 1mm Thick t233 sqm Excess(+) Full Conversion INR

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete t234 qtl Excess(+) Full Conversion INR

Providing, lowering, cutting & jointing salt glazed stone ware pipes and specials ISI marked as per IS: 651-2007 class Sp-1 into trenches for all depths and laying out the same to correct alignment, gradients, levels etc., cutting of concrete beds and joints holes, supporting the pipes and specials, in correct position in a suitable rigid manner while the same are being jointed and until the surrounding benching, haunching and envelopes are completed including jointing of pipes and specials in trenches, using cement sand mortar 1:1 and best spun Jute yarn as per IS:1887, finishing and trowelling of each joint at an angle of 45 degree with the longitudinal axes of pipe, watering, keeping the joint covered and wetted till the same are cured, testing the sewerage line for leakage and making all leakages and defects good as laid in the contract specification, chipping and finishing the cut surface to uniform finish to the entire satisfaction of engineer-in-charge Including all cartage etc complete in all respects. 450mm i/d pipe t235 M Excess(+) Full Conversion INR

Providing & Fixing RCC Road Gully grating & frame RCC Road Gully grating & frame size 457mm*457mm t236 Each Excess(+) Full Conversion INR

Constructing Punjab Standard Drain, type house connection complete consisting of cement concrete drain moulded and laid over lime concrete foundation, rendered and finished smooth with 6mm thick rendering concrete to be of 1:2½:5 parts by volume of cement :sand: stone bajri and rendering to be 1:1 cement sand mortar. t237 M Excess(+) Full Conversion INR

Constructing brick masonry manhole in cement mortar 1:5 ( 1 cement : 5 coarse sand ) R.C.C. top slab 20cm thick using M-20 mix by using mixer and vibrator, TMT Fe500 @ 80.00 kg/per cum, foundation concrete 1:4:8 mix (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making 40mm thick benching in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, Orange coloured PVC steps including RCC cover with frame complete as per standard design complete in all respects. Inside size 75x120 cm and 120 cm deep t238 Each Excess(+) Full Conversion INR

Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design. Size 450mm x 450mm inside with RCC 455mm x 455mm cover and frame light duty double seal t239 Each Excess(+) Full Conversion INR

Foot Rest for Manhole. Providing orange colour safety footrest of minimum 6mm thick plastic encapsulated as per IS:10910 on 12mm dia steel bar confirming to IS: 1786 having minimun cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruted legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specification and having manufacturer's permanent identification mark to be visible even after fixing, including fixing in manholes with 230x150x75cm cement concrete block 1:2:4 (1 cement: 2 sand: 4 stone aggragate) complete as per design. t240 Each Excess(+) Full Conversion INR

Providing & fixing 560 mm, 500 mm and 450 mm internal diametre circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS:12592-2002 including carriage from the stores of the Engineer-in-charge to site of work, loading, unloading including stacking and setting the same to correct lines over manholes including cement concrete copping (M:20) around the rame etc. Dia of steel for lifting hook is 16mm. (for EHD and HD). only RCC Man hole cover with Frame 450mm i/d RCC man hole cover with frame as per ISI Extra Heavy duty t241 Each Excess(+) Full Conversion INR

Sub Estimate for Repair of Taar Ghar and Rest/Guest Room at Canal Colony Ferozepur. t242

Finishing walls with exterior decorative cement based such as snowecem, robbiacem etc. on old work one coat to give an even shade t243 sqm Excess(+) Full Conversion INR

Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats on old distempered work when shade is changed t244 sqm Excess(+) Full Conversion INR

Scraping White wash and colour wash t245 sqm Excess(+) Full Conversion INR

Repairs to plaster in patches of Area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 Metres lead With cement mortar 1:4 (1 cement: 4 sand) Taking area 2.5 sqm t246 sqm Excess(+) Full Conversion INR

Preparation of plastered or concrete surface for painting (including sand papering the surface) using Acryllic Wall Putty by applying two or more coats to get required finish including priming coat to make an even surface before applying Acrylic wall putty on new plastered surface.Complete as per specifications t247 sqm Excess(+) Full Conversion INR

Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled Doors of area 3 sqm and below. t248 Each Excess(+) Full Conversion INR

Windows of area 3 sqm and below t249 Each Excess(+) Full Conversion INR

Supplying and fixing of Japani sheet frames (Chowkat) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section (standard design latest), including iron lugs (hold fasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiving tower bolts and finished, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete Doors and windows frame of size 118mm x 60mm with 40 mm wide single rebate weighing 3.43 kg per meter. t250 Mtr Excess(+) Full Conversion INR

Providing & Fixing glass panes with nails and putty or wooden strip complete in all respect 3mm thick or 8.44 Kg/ sqm t251 sqm Excess(+) Full Conversion INR

Applying priming coat with metal primer on new steel or iron work including preparation of surface.(16.20) t252 sqm Excess(+) Full Conversion INR

Factory manufactured Solid door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position 35mm Thick t253 sqm Excess(+) Full Conversion INR

Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt) For shutter area above 0.50 sqm. t254 sqm Excess(+) Full Conversion INR

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :300mm x 16mm t255 Each Excess(+) Full Conversion INR

Deodar wood doors shutter windows shutter including hinges, screw and cords etc. Complete fixed in position Battened and framed 50mm thick t256 sqm Excess(+) Full Conversion INR

Wire gauge fixed in steel windows, of standard rolled steel section with 3mm thick flat iron cover moulding of 12.5 mm width, fixed with machine screws, complete in all respects. Welding by gas or by electric plant, t257 sqm Excess(+) Full Conversion INR

Providing & fixing 16 gauge stainless steel pipe gate of grade 304 duly fixed at site with the help of M.S pivot & hinges grouted in cement concrete complete in all respect as per any kind of drawing & design t258 KG Excess(+) Full Conversion INR

Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete. t259 sqm Excess(+) Full Conversion INR

Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc. t260 sqm Excess(+) Full Conversion INR

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. t261 sqm Excess(+) Full Conversion INR

Providing & Fixing glass panes with nails and putty or wooden strip complete in all respect 5.0mm thick Plate glass (INDIAN) t262 sqm Excess(+) Full Conversion INR

Providing and laying 50 mm thick factory made cement concrete interlocking paver block of M-30 grade machine made rubber moulded smooth finish with strong vibratory process or with vibrohydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge t263 sqm Excess(+) Full Conversion INR

Providing and Fixing ceiling at height upto 4.00 Mtr. consisting of 12.5mm thick Gypsum Board of any size G.I. Cradling hanged from the ceiling by means of G.I. hanger complete as per drawings,specifications and tothe entire satisfaction of engineer-in- charge. t264 sqm Excess(+) Full Conversion INR

Erection of light fixtures on wall/ ceiling having connection with PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75sq.mm complete:- Erection of 1X20/28/36/40W Box Type (LED/ Fluorescent) light fixture t265 Each Excess(+) Full Conversion INR

Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. Size 600 x 600mm t266 sqm Excess(+) Full Conversion INR

Reputed Brand 2 - seater Sofa Set with No Secondary unit Secondary Unit t267 Each Excess(+) Full Conversion INR

Wood Square Material Table Furniture Assembly t268 Each Excess(+) Full Conversion INR

Reputed Brand 5 Star LED (Light Emitting Diode) Full HD (1920 x 1080) TV t269 Each Excess(+) Full Conversion INR

Unbranded PVC thermal Insulated Panel For Wall t270 Each Excess(+) Full Conversion INR

Reputed Brand Stainless Steel 304 Curtain Pipe, Sider and mounting bracket t271 Mtr Excess(+) Full Conversion INR

Reputed Brand Cotton Traditional Curtains-Handicraft t272 Each Excess(+) Full Conversion INR

Reputed Brand 5 Star Wall Mount Type Split Air Conditioner of Capacity Between 1.3 Ton - 1.7 Ton t273 Each Excess(+) Full Conversion INR

Reputed Brand Electric Ceiling Type fan 1200mm 1 Star t274 Each Excess(+) Full Conversion INR

Reputed Brand Inverter 0.9 KVA Including Battery t275 Each Excess(+) Full Conversion INR

Office Chair t276 Each Excess(+) Full Conversion INR

Reputed Brand electric Copper Led batten with battery/Invertor, Power 36 Watt t277 Each Excess(+) Full Conversion INR

LED Luminaire 48 Watt t278 Each Excess(+) Full Conversion INR

Providing and fixing, in position concealed G.I. section for wall panelling using board of required thickness fixed on the ‘W profile (0.55mm thick ) having a knurled web of 51.55mm and two flanges of 26mm each with lips of 10.55 mm placed @ 610mm C/C in perimeter channel having one flange of 20mm and another flange of 30mm with thickness of 0.55mm and web of length 27mm. Perimeter channel is fixed on the floor and the ceiling with the nylon sleeves @ 610mm C/C with fully threaded self-tapping drive all screws. Board is fixed to the ‘Wprofile with 25 mm countersunk ribbed head screws @ 200mm C/C, all complete as per the drawing & directions of engineer-incharge the joints of the boards are finished with specially formulated jointing compound and 48mm wide fiber tape to provide seamless finish. Tapered edge calcium silicate board made with calcareous & siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure, Non combustible & spread of Flame (as per BS standard 476 Part IV & VII), Water, Termite & Fungus resistant, compressive strength 25 kg/sq.cm, Bending strength 100 kg/sq.cm. 10 mm Thick t279 sqm Excess(+) Full Conversion INR

Any Other Item t280 No. Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information