REPAIR TO SHED, STAIR CASE, FLOORING, ALUMINIUM AND PVC JOINERY AND OTHER ITEMS UNDER AGE B/R-I OF GE(EAST) AGRA

Amount

Taking down cement plaster on brick or stone walls, ceing etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

Demolition of concrete in any description and in any position (unreinforced) complete all as specified and directed.

Dismantling of stone slab of any description or thickness in floor ,step, riser etc laid bedded and pointed complete all as specified and directed.

M&L 25mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in sub base of floor to receive tilescomplete all as specified and directed.

M&L for 75 mm thick Cement concrete1:3:6 type C2 (using 20 mm graded stone aggregate) as in hard standing and plinth protection laid in panel etc, finished even and smooth with out using extra cement complete all as specified and directed.

M&L for 20-25 mm thick machine cut kota stone slab flooring over 20mm thick cement screed bed in CM 1:6 , laid and jointed with grey cement slurry mixed with pigment to match the shade of stone slab including cutting, grinding, rubbing and polishing complete all as specified and directed.

M&L for 20-25 mm thick machine cut kota stone slab as in skirting , riser of step , dado and pillar etc over 15 mm thick cement plaster in CM 1:4 , lade and jointed with grey cement slurry mixed with pigment to match the shade of stone slab including cutting, grinding, rubbing and polishing complete all as specified and directed.

M& L for cement concrete 1:2:4 type B -0 (using 12.5 mm graded stone aggregates) as in padding , benching, coping , incl removal of old plaster over sunshed etc complete all as specified and directed.

M& L for cement concrete 1:3:6 type C 1 ( using 20 mm graded stone aggregates) as in benching, coping , filling of hold fast etc complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) complete all as specified and directed.

M&L 3mm thick ordinary quality sheet glass and glazing with oil putty in square not exc 0.5 Sqm in each pane complete all as specified and directed.

Taking down chowkhats or frames with shutters (with out taking the shutters from the frame) not exc 1.5 Sqm each etc complete all as specified and directed.

Taking down chowkhats or frames with shutters (with out taking the shutters from the frame) exc 1.5 Sqm and exc. 4 Sqm each etc complete all as specified and directed.

Dismantling of mild steel work of any description not otherwise provided for etc complete all as specified and directed.

S & F Mild steel such as joist channel angle tee section fixed independently without connecting plates etc complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S. 1161-1979 grade St. - 240. complete all as specified and directed.

Supplied and fixed mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed th eother, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut 5-10 mm dia of neck and n exc 5cm long, complete all as specified and directed.

S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; ; clamps;M.S. plate for support of trusses & flat iron for support of purlins including necessary welding, cutting to shape,and necessary drilling holes etc complete all as specified and directed.

S&F of Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding/ stright flashing to wall, fixed with self tapping screws complete all as specified and directed.

Cutting holes in brick wall built in cement mortor or cement lime mortor and stone wall built in lime mortor or wall of cement concrete of superficial area n. exc 150 sqcm and making good in cement mortor 1:3 or cement concrete 1:2:4 type B1etc complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Excavation in post holes (or similar holes) each n. exc 0.50 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm in soft / loose soil etc complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm PVC wood grain coloured sheet and reinforced with MS square tube, as shown on drawings as per manufacturers specification complete all as specified and directed.

Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 176 of SSR 2020 (Part-II) complete all as specified and directed.

S&F 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed.

S&F Mild steel butt hinge medium weight cold rolled of size 100mm long and fixed with screw/ welding complete all as specified and directed.

M&L 100mm long aluminium anodized handle cast type complete all as specified and directed.

M&L for fixing in repirs 12 mm thick prelaminated particle board, exterior grade prelaminated one side with decorative choice lamination & other side balancing white lamination complete and fixed with anodized aluminium snap beading, glazing clips, joining clips in aluminium door/ window/ partition etc complete all as specified and directed.

S & F in repair cast iron Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in widthand of weight between 61 to 80 kg and fixed complete all as specified and directed.

S& F partly glazed (5.5 mm thick tinted sheet glass) and partly prelaminated board panel (min 12 mm thick) aluminum anodised door of section weighing 0.55 Kg/Sqm consisting of frame of 63mm x 38 mm size with shutter fixed on frame ,. Door shutter consists of top rail size is 83 x 44 mm , bottom rail & lock rail size is 110 x 44 mm & style of door shutter is 83mmx 44 mm with automatic door closer equipments fitted on frame as required fixed with rubber gasket & aluminum beading any No of panels with aluminum handle , locking arrangement etc complete all as specified and directed.

S/F anodised aluminium windows and ventilator of section weighing 0.55 Kg/Sqm sliding tye consisting of frame 63mm x 47 mm shutters 39 mm x 18 mm with rollers and locking arrangements and aluminium grills ets with 4 mm thick tinted glass with rubber gasket and aluminium beading etc including necessary cutting holes on wall and floor and confirming to IS complete all as specified and directed.

M & L for framed work such as grill grating etc with ends of bars shouldered or riveted or forged into spikes , framed guard bars, doors ladders , framed balusters walkways, stair case railing, framed work of water tanks and similar works etc complete all as specified and directed.

M & L for washed stone grit plaster on exterior walls in two layers , under layer 12mm th cement plaster 1:4 ( 1 cemant : 4 coarse sand ) furrowing the under layer with scratching tool , applying cement slurry on the under layer @ 3 Kg of cement per sqm , top layer 15 mm th cement plaster 1 :1 / 2 :2 ( 1 cement : 1/2 coarse sand : 2 stone chipping 10 mm nominal size ) in panels with groove all arround as per approved pattern incl. scrubbing and washing the top layer with brushes and water to expose the stone shipping complete all as specified and directed.

Demolition of brick work or stone/ boulder Masonry, built in cement mortar including all quoins, pillars etc including removal of spoil etc complete all as specified and directed.

M&L for brick work with subclass B bricks old size straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

All as per item no 36 above but except brick (using old brick)

M&L, rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surface and finishing surface fair and even complete all as specified and directed.

Material & labour 10mm thick rendering in CM 1:3 concrete surfaces of ceiling etc, finished surfaced even & smooth with out using extra cement complete all as specified and directed.

M & L for two coat of cement base paint on new plastered surfaces of wall over one coat of alkali resistant primer including preparation of surfaces complete all as specified and directed.

M&L for preparation of newly plastered or un-plastered surface of ceiling and applying three coat of white wash complete all as specified and as directed.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges , etc complete all as specified and directed.

VISHESH BUILDERS

M/s Salim Mohomad

MNR ASSOCIATES