PERIODICAL SERVICES TO EXTERNAL SURFACES OF CERTAIN BUILDING IN TECH AREA UNDER GE AF TECH ATEA AT AF STN AGRA

Amount

Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, Including removal of debries out side MD land all specified and directed.

M&L for rendering 15mm thick in two layers of 10+5mm in cm1:4 mixed with Pidi proof 101 LW(+) or Dr fixit or equivalent intergral water proofing admixture:- @ 200ml/bag over two coats of super latex 302 of Dr fixit or equivalent in the ratio (1:4:7) (One part super latex, 4 part water and 7 parts of cement). @ 1.50 Kg of homogenious mixture/sqm in two coats and finish the surface even and smooth without using extra cement) for external walls complete as specified and directed. Note: Pidi proof and super latex to be measured and paid separately.

Supply only Pidi proof 101 LW (+) integral water proofing admixture .

Supply only super latex 302

M&L for preparation of new plastered surfaces of walls and applying two coats of exterior emulsion paint with one coat of primer in normal / camouflage pattern as per manufacturers instructions etc complete all as specified and directed by Engr-in-charge. Note:- (i) finishing coat shall be applied through roller only. (ii) Primer and emulsion to be carried out through air less spray machine (Mechanical means)

M&L complete removal of existing treatment on wall/roof projections including facia,cornices etc by scrapping with mechanical sander(having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust,loose paint etc by skilled labour complete all as specified and directed.

M&L for applying Two coats of exterior emulsion paint with one coat of primer in normal / camouflage pattern as per manufacturers instructions on complete removal surfaces of old walls etc complete all as specified and directed by Engr-in-charge. Note:- finishing coat shall be through roller only. Note :- Primer and emulsion to be carried out through air less spray machine (Mechanical means)

M&L for providing & applying average 1mm thick of Birla/ JK wall care putty over prepared surface to achieve the surface even and smooth for painting, complete all as specified and as directed

M&L for preparation of old surfaces and applying One coats of exterior emulsion paint in normal as per manufacturers instructions etc complete all as specified and directed by Engr-in-charge. Note:- (1) Application of emulsion to be carried out through air less spray machine (Mechanical means). (2) Repair of pot holes, cracks and undulation in surface with wall care putty as required (wall care putty shall be measured and paid separately under relevant items).

M&L for preparation of old plastered surfaces of walls and applying one coats of cement paint in normal pattern ,complete all as specified and directed by Engr-in-charge. Note :- The quoted rates shall be deemed curing of walls.

M&L gunniting to RCC works in column ,beams, slabs, landing, balconies etc by removing loose concrete and plaster, cleaning of surfaces with wire brushes and applying epoxy, paint anti corrosive coating of minimum 40-50 microns thick to rusted steel reinforcement after removing/ cleaning all rust by sand/grit blasting and supply and fixing welded steel wire mesh 75mm x 75mm with 3mm dia steel wire as facies/drops and similar works etc and applying expoxy based or other equivalent suitable bonding agent ie Sikadur 32 of Sika. Nito bond EP of fosroc or equivalent (as per manufacturers instruction) to bond old and new concrete mixing @ 2% by weight of cement polycrete and providing gunniting with a minimum pressure of 2.5 Kg/sqcm and applying 25mm thick layers of gunniting in cement mortar (1:2) using ordinary port land cement of 43 grade over wherever required complete all as specified. Note:- The quoted rates shall be deemed the following: (i) After placing the additionnal reinforcement all concrete surface shall be throughly scrubbing with brushed washed with water and allow dry. (ii) Work to be carried out as in patches as directed by Engr-in-charge. (iii) Necessary scaffolding ,15mm thick plaster in CM 1:4 and TMT bars (where applicable) etc . (iv) preparation of surface and applying two coat of exterior emulsion paint with one coat of primer.

M & L for prepararing old decorated steel surfaces by washing down over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as directed.

M & L for Writing letter or figures on MS Plate ( Block, Romman, Italic, or India) n. exc 30 cm Height with synthetic enamel paint with and including as specified and directed by Engineer-in-charge. Note : MS Plate shall be measured and paid separately.

M&L for preparation of old cement concrete surfaces of floor and applying one coats of floor emulsion paint in normal pattern, of any tint as per manufacturers instructions etc complete all as specified and directed by Engr-in-charge.

Supply and fix MS Plate of size 80x30cm of suitable thickness, fixed on wall with fasterner etc complete all as specified and directed.

m/s meetu enterprises

Sethi Brothers

M/s Srijan Construction Company

M/S SINGH ELECTRIC CO

Asha Construction

B K Construction Company

M/s M S Sharma and Co.

Abhi Construction

J P CONTRACTORS AND SUPPLIERS