PROVN OF PARKING SHED AT AF STATION PANAGARH UNDER GE AF PANAGARH

Amount

NOTE FOR SHED : The rate quoted by the tenderer shall be deemed to include for any minor details of work and /or construction which obviously and fairly intended and which may not have been specifically referred for the execution and completion of the work in a workman like manner and sound construction. In case of deference of opinion between the contractor and GE concerned as to whether it constitutes minor or extra constructional details included in the unit rate quoted or not, the decision of the Accepting officer shall be final, conclusive and binding.

SCH 'A' Part-I ( Site Development, Earthwork and Demolition)

M&L for Surface dressing Soft/loose soil n exc 15 cm deep any type of soil complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m deep for foundation and getting out in soft/loose soil all as directed and specified.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n exc 25 cm soft/ loose soil all as directed and specified.

Removing excavated soil n exc 50 m and depositing where directed at a level n exc 1.50 mtr above the starting point all as directed.

M&L for hard core (broken stone) of gauge n.exc. 63mm deposited spread and levelled in layers n.exc. 15 cm thick watered and rolled / rammed to a true surface complete all as specified and directed.

Excavating in post holes in hard/dense soil n.exc. 0.5 cum and getting out and removing surplus soil to a distance n.exc. 50 mtr and making good the surface complete all as specified and directed.

M&L for sand cushioning in cable trenches over & under the cable, with river washed coarse sand, as per standard practice with proper compaction complete all as specified and directed by Engr-in-Charge. (Punned thickness 18 cm shall be considered for payment as per para 19.75 of SSR Part-I)

Supply and lay fly ash bricks locally available of size 230 X 115 X 75 mm for Signal cable and laid in trenches over underground cables complete all as specified and directed.

SCH 'A' Part-II ( B/R Works)

M & L for PCC 1:4:8 (40mm graded aggregate) type D2 as in post holes complete all as specified by Engr-in-Charge

S & F of Rolled MS Fe 410-W (Gde -E 250) as in Joist, channel, angle or tee sections, posts, rafter, purlin, of circular/square/rectangular hollow sections fixed independently by welding/ riveting with/without connecting plates, etc complete all as specified by Engr-in-Charge

S & F of Pre Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified by Engr-in-Charge.

S & F of Pre Painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified by Engr-in-Charge.

M & L for preparartion of surface of steel surfaces and applying two coats of Synthetic enamel paint over a coat of red oxide specified by Engr-in-Charge.

M & L for 100mm thick PCC 1:4:8 (40mm stone aggragate) type D2 as in subbase complete and specified by the Engr-in-Charge.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete and specified by the Engr-in-Charge.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete and specified by the Engr-in-Charge.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

SCH 'A' Part-III (E/M Works)

M&L for point wiring for following with single core PVC insulated and unsheathed multi stranded FRLSH copper conductor cable 1100 volts grade size 1.5 Sqmm (nominal area) in and including non metalic rigid concealed PVC conduits (medium grade) (ISI marked) of size 25/20 mm dia (as applicable) including all accessories alongwith one single core PVC insulated unsheathed 1,5 Sqmm (nominal area) multi stranded FRLSH copper conductor cable as earth continuity wire and connected to earth dolly and including PVC sunk boxes ISI marked for mounting of switch, socket, fan regulator etc with 3mm thick plastic laminated sheet as top cover making good the disturbed surface to match with existing surface/wall complete all as specified and as directed. Note:- Three runs of copper conductor cable & one run of PVC condiut including all accessiries measured a one unit. Colour coading shall be strickly followed.

One Light Point Contrlled by one way 5/6 amps

One socket outlet 5/6 Amp point on the same board

S&F switch piano flush type 6 Amp single pole one way (ISI Marked) complete all as specified and as directed

S&Fsocket outlet 2 in 1, 3 pin, 6 Amp flush type (ISI Marked) complete all as specified and as directed

S&F ceiling rose 2 to 3 terminals . Surface backelite fixed to wall/ceiling complete all as specified and as directed.

S&F MCB SPN ,6 to 32 Amps, 240v, 'C' Curve complete all as specified and directed.

Supply and fixing LED lights fitting 1 x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as directed by Engineer-in-Charge

S & F single pole and neutral DB wall mounting type, 240 volts, 2 way without bus bar, single door (Metal), suitable for fixing MCBs including connection etc. complete all as directed

Supply and fixing / Laying in, connecting, test and commissioning of 10 Sqmm x 2 core LT under ground cable XLPE insulated, screened, PVC bedded, galvanised steel wire, armoured , electric cable (heavy duty) with multistranded aluminium conductor, 1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe including cable glands,lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) all as directed by the Engr-in-Charge.

S & F LED bldg security light fittings 35 Watt ,230V AC outdoor type with high pressure die cast aluminium housing, heat resistant,toughned glass cover with IP66 protectioncomplete all as spedified and as directed

M&L for blag security light bracket made out of Gl pipe light grade 32 MM dia 1.2 mtr length bent to shape and reduced to required size at top upto 1.2 mtr length by cutting, welding and well finishing including MS clamp of flat iron of size 25 x 5 mm suitable length 2 Nos complete with drilling hole, fixing with runts bolts and washers including painted with two coats aluminium paint over a coat of red oxide primer

Supply and fixing 40mm dia GI tubing medium grade ISI marked laid in trenches /laid under floor for protection of cable including all fittings such as elbow,bends etc.and short length complete all as specified and directed.

M&L for boring of holes under road ,pavement,hard standing by trenchless technology using ultra sounding technique and necessary machine including etc as per site requirement complete all as directed.

BABY ENGINEERING ELECTRICAL MECHANICAL STORES (BID ID -3196043)

ANSH CONSTRUCTION (BID ID -3196373)

Elite Enterprises (BID ID -3185481)

M/s Raj Kumar Chopra (BID ID -3195625)

UNIQUE ENTERPRISE (BID ID -3195562)

M/S TRIVENI BUILDERS (BID ID -3190153)

N B CONSTRUCTION (BID ID -3195822)

SARASWATI ENTERPRISE (INDEX NO CEEC D-81) (BID ID -3189470)

M/S KUMAR AVINASH (BID ID -3187501)

M/S DYNAMIC INDIA (PROJECT) CONSTRUCTION (BID ID -3195882)

S.P.S. SUPPLIERS (BID ID -3195852)