REPAIR /MAINT TO TILING, FLOORING, PLAIN CEMENT CONCRETE WORKS, SUNKEN PORTION, JOINERY, GLAZING WORK, PLASTERING WORK, PLUMPING WORK, SANITARY FITTINGS, GI TUBING, VENT CI/PVC PIPES AND PLINTH PROTECTION IN LOWER LEIMAKHONG MIL STN

Amount

Schedule 'A'

Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thick thickness below or above ground level complete all as specified and directed.

M & L Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. complete as specified and directed.

M&L for 15mm thick rendering to sides and bottom of sunken slab in CM 1:3 mixed with water proofing compound, finishing the surfaces even and smooth without using extra cement complete as specified and directed.(Using Dimapur Sand) [Note: WPC will be measured and paid separately)

M&L for 25mm thick cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in sunken floors complete all as specified and directed.

S&F GI medium grade spouts 40mm dia projecting at least 20 cm clear of the wall complete all as specified and directed.

M&L for applying two coats of hot bitumen 85/25 grade @ 1.70 Kg/Sqm over vertical surfaces and floor of sunken slab after laying all CI connection branch pieces etc after covering joints with PCC 1:2:4 type B1 complete all as specified and directed.

M&L for cement concrete type D-2, 1:4:8 (Nominal Mix) using 40mm graded stone aggregate mixed with water proofing compound @ 3% by weight of cement as in concrete padding,laid to require slope,including finishing the concrete surface fair and even without using extra cement complete all as specified and directed.

M&L PCC 1:7:12 type F2 (using 40mm graded stone aggregate) with bricks as in filling of sunken slab after laying and carrying out required tests for CI pipes joints complete all as specified and directed.

S & F grating doom 125mm dia of PTMT with waste hole (minimum weight 40gms) complete all as specified and directed.

S & F grating doom 100mm dia of PTMT with waste hole (minimum weight 40gms) complete all as specified and directed.

S & F in repair for PVC waste pipe 32mm dia heavy duty fix to coupling complete all as specified and directed.

Supply only water proofing liquid chemical for use in concrete/rendering surfaces of wall, floor in sunken pit, manholes and floortraps etc complete all as specified and directed. Note :(i) It will be used as per manufacturer instructions. (ii) chemical product. Fosrok, sikka or equilent

M&L for 25 mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate ) as in leveling coarse complete all as specified and directed.

M & L for joint free Non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr in Charge

M&L for Glazed Coloured Ceramic tiles of size 400x400x6 to 7mm thick laid in floors & skirting set & jointed in neat cement slurry & pointed in coloured cement to match the shade complete all as specified and directed

Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:3 as backing coat on stone masonry surfaces or surface other than fair face of brick work or on one side of lathing complete all as specified and directed.

M&L for 75mm thick PCC type C2 1:3:6 grade (Nominal Mix) (using 40mm graded crushed stone aggregate) as in plinth protection finishing surfaces even and smooth without using extra cement complete all as specified and directed.

S&F in repairs vitreous china European type wash down water closet pan (Pedestal pattern) of white colour including plastic water closet seat black closed pattern with flat bottom (with MS or CP hinging device) and fixing bolts, P or S trap, necessary inlet and outlet connections including syphonic action type low level PVC flushing cistern of 10 lit capacity white in colour and PVC flush pipe 32mm dia complete all as specified and directed.

S&F in repair PVC flushing cistern syphonic action type,10 litters capacity, low level white with inlet ball, valve, float and handle including bracket ,PVC Connection and 32mm dia flush pipe complete all as specified and as directed.

S&F in repair, Vitreous china wash basin, white flat back, size 630 x 450 mm excl taps, waste chain and plug and porcelain stopper but incl brackets, PVC waste pipe 32 mm dia, CP waste coupling & PVC connection 45cm long with PTMT nuts at both end complete all as specified and as directed.

S&F in repairs Pillar taps, 15mm dia cast copper alloy, with capstan heads, chromium plated, but fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair fancy type chromium plated stop cock 15mm bore cast copper alloy screwed down high pressure with crunch or butterfly handle screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair 15mm bore bib taps, cast copper alloy, chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferule complete all as specified and directed.

Dismantling PVC water tanks of capacity 500 litre and removing to store complete all as specified and directed.

Dismantling PVC water tanks of capacity 1000 litre and removing to store complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank, ISI marked, 500 litres capacity of multilayered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including all necessary inlet/outlet connections & brass ball valve complete all as specified in SSR Part-I and as directed.

S&F rotational moulded polyethylene water storage tank, ISI marked, 1000 litres capacity of multilayered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including all necessary inlet/outlet connections & brass ball valve complete all as specified in SSR Part-I and as directed.

Cleaning and removing all scale and dirt, etc from 500 ltr capacity of tanks (PVC, RCC) and from mouths of circulating pipes in any position and location etc including opening wash out and cleaning with chlorine powder inside tank and closing the wash out etc complete, capacity of tank including to write clean on date in the surface of water tank etc complete all as specified and directed. (Note:- Letters for clean on date will be paid separately)

Cleaning and removing all scale and dirt, etc from 1000 ltr capacity of tanks (PVC, RCC) and from mouths of circulating pipes in any position and location etc including opening wash out and cleaning with chlorine powder inside tank and closing the wash out etc complete, capacity of tank including to write clean on date in the surface of water tank complete all as specified and directed. (Note:- Letters for clean on date will be paid separately)

M&L for writing letters or figures (Block, Roman, Italic or Indian) n.exc 30cm high with best quality synthetc enamel paint complete all as specified and directed.

M&L for Writing stops, commas, short lines, dashes, hyphens, brackets etc with best quality synthetc enamel paint complete all as specified and directed.

S&F PP-R 15/20 mm Bore of pipes of Ball valves (brass insert) as per requirement of the site complete all as specified and directed.

Taking up or down 15mm dia of steel tubing and connections, including cleaning for refixing or removal from site to store complete all as specified and directed.

Taking up or down 20mm dia of steel tubing and connections, including cleaning for refixing or removal from site to store complete all as specified and directed.

S&F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Refixing of old 20mm GI tubing and connections on new or old position (walls, ceilling, floor etc) complete all as specified and as directed.

Refixing of old 15mm GI tubing and connections on new or old position (walls, ceilling, floor etc) complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but not exc. 4 sqm each complete all as specified and directed.

Taking down shutter of any description exc 1sqm but not exc 2 Sqm each and removing unserviceable materials from site of workcomplete all as specified and directed.

M&L for PCC 1:2:4 type B2 (Nominal Mix) (using 40mm graded stone aggregate) as in hold fast covering complete all as specified and directed.

S&F 2nd class hardwood plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F 40mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F 2nd class hard wood 40 mm thick plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed

S & F 35 mm thick 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) fitted chowkats complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet trip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawings as shown in SSR Part 1- 2009 complete all as specified and directed

Supply and fixing factory made UPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi?chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made complete all as specified and directed by Engr-in- Charge.

Supply and fixing factory made UPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made complete all as specified and directed by Engr-in- Charge.

M&L for MS work as in framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

M&L for hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed by Engr-in-Charge.

S&F sheet glass 3mm thick, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and as directed.

M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F in repair 100mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S/F 100mm extruded al handles, fabricated type polished complete all as specified and directed by Engr-in-Charge.

S&F 150 mm long extruded aluminium alloy handles,fabricated type, polished completed all as specified and directed

S&F 150mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and as directed.

M&L for making good surface under cills or over arches, lintels and bressummers, including all-pinning when necessary in CM 1:4 in stone walls complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles and removing unserviceable materials from site of work complete all as specified and directed.

M&L for brick work with subclass ‘B’ bricks, (locally available best quality) old size bricks straight or curved on plan exc 6 m means radius, built in cement mortar (1:6) complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces of wall in CM 1:6 finished even and fair without using extra cement complete all as specified and directed.(Using Dimapur Sand)

M&L for rendering in two layer (10mm+5mm) thick on other than fair faces of brick work in cement mortar(1:4) using water proofing compound @2% by weight or cement as per manufacture instruction and finishing even and smooth without using extra cement complete all as specified and directed. (Note: Plastering shall be carried out using Dimapur Sand. Note: WPC will be measured and paid separately)

S&F in repairs 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F in repairs 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall with steel clamps as in waste/soil pipe complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall with steel clamps as in waste/soil pipe complete all as specified and directed.

S&F in repairs PVC (SWR) bends of any radius of 110mm dia with oval and access door complete all as specified and directed.

S&F in repair 75mm dia PVC (SWR) bends of any radius with acess door complete all as specified and as directed.

S&F in repairs PVC (SWR) branch piece (single ‘Y’) equal or unequal for 110mm dia PVC pipe complete all as specified and directed.

S&F in repair PVC(SWR) branch piece (single ‘Y’) equal or unequal for 75mm dia PVC pipe complete all as specified and directed.

S&F in repair PVC (SWR) branch piece junction single, (Single T) equal or unequal 110mm dia with access door complete all as specified and directed.

S&F in repair PVC (SWR) branch piece junction single, (Single T) equal or unequal 75mm dia with access door complete all as specified and directed.

S&F in repair for PVC (SWR) vent cowl suitable for 110mm dia PVC pipe complete all as specified and directed.

S&F in repair for PVC (SWR) vent cowl suitable for 75mm dia PVC pipe complete all as specified and directed.

S&F PVC in repair (SWR) floor trap with grating with incl jointing to waste pipe fixed in cement concerete (1:2:4) diameter of outlet pipe 75mm complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

M&L for granite tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types including 15 mm thick bedding layer in CM 1:6 complete all as specified and directed.

S&F in repair water closet (Squating pattern) of vitreous china squatting pan of "ORRISA" pattern size 580 x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) incl connection to trap and flushing pipe and anti syphon pipe etc complete incl trap set in and incl concrete bedding complete all as specified and as directed.

S&F in reair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F as in replacement stainless steel plate rack of size 24" x 36" x 10" complete all as specidfied and directed. (Make: Blue Star cat No KPR-312 or equivalent in Nirali/Jain Brothers/Prayag)

M&L for Complete removal of vegetables, uprooting of trees / plants on the surface of buildings roofs/ walls etc and applying pesticides as per manufacturing instructions complete all as specified and approved by GE.

Supply only oil putty for glazing.

Supply only galvanized steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm.

Supply only Grating doom 100mm dia of PTMT. (Minimum weight 25gms)

Supply only Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms)

Supply only wire nails of any size.

Supply only Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed.

Supply only Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

Supply only Soap dish,vitreous china wihte approximate size 160x160x90mm. ( Make: Prayag)

Supply only Brass chromium plated shower rose 125mm size with Arm ( Make: Prayag)

Supply only Plywood 4 mm Thick (Make : Green Ply)

Supply only PVC connection 15 mm size with brass nut washer at both ends 45 cm long.

Supply only 3 mm thick ordinary quality Glass panes (Make : Saint Gobin)

Supply only floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, Overall length of cover plate 140mm.

Supply only PVC connection 15 mm size with brass nut washer at both ends 30 cm long.

Supply only PVC connection 15 mm size with brass nut washer at both ends 60 cm long.

Supply only multilayered layer wall construction Plastic water tank ISI marked of 500 Ltr capacity.

Supply only Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern.

Supply only Brass chromium plated shower rose 125mm size with Arm ( Make: Prayag)

Supply only PVC valveless, syphonic action type,10 litres flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets.

Supply only 15mm dia Galvanised steel tubes of medium grade.

Supply only 20mm dia Galvanised steel tubes of medium grade.

Supply only Chromium plated health faucet (ABS Body) with 1.2m long PVC tube & wall hook complete all as specified and directed.

Supply only 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

Supply only 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe.

Supply only 15mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe.

Supply only 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe.

Supply only 50 Kg Cement Bags.

Supply only wooden screw 25mm to 40mm long.(Size as reqd)100 Nos per Pkt

Supply only wooden screw 15mm to 20mm long.(Size as reqd) 100 Nos Per Pkt

Supply only stainless steel grating for floor trap of size100mm dia.(Make-Prayag & Equivalent)

Supply only plain aluminium sheet 0.56mm thick.

Supply only M Seal 500gm pack.

Supply only mild steel Helical door spring 250 mm long with all accessories.

Supply only white cement in 1 Kg pack. (Make Birla)

Supply only PVC Waste pipeb of 32 mm dia for WHB

supply only PVC Waste pipe for Urinal. (Size as reqd by enginer-in-charge)

Supply only PVC Waste pipe for sink. (Size as reqd by enginer-in-charge)

Supply only PTMT PVC Float valve of 20 mm dia with Rod and ball.

Supply only medium grade GI Nipple 15 x 150 mm ISI Marked.

Supply only medium grade GI Nipple 15 x 300 mm ISI Marked.

Supply only medium grade GI socket reducer 20mm x 15mm ISI Marked.

Supply only medium grade GI socket 15mm ISI Marked.

Supply only medium grade GI Union 15 mm ISI Marked.

Supply only medium grade GI Elbow 15mm ISI Marked.

Supply only medium grade GI Elbow 20mm ISI Marked.

Supply only medium grade GI Tee 15mm ISI Marked.

Supply only medium grade GI Tee 20 mm ISI Marked.

Supply only medium grade GI socket reduser 25mm x 15mm ISI Marked.

Supply only Thread Roll.

Supply only Fevicol SH in 1 Kg packing.

Supply only MS window peg stays long (Size as reqd by enginer-in-charge)

Supply only Plastic rawl plug 40 mm long.

Supply only Rubber cill door bottom

Supply only PVC Flushing Cistern Handle Set

Supply only Flushing Cistern Syphon Washer

M&L for cupboard shutter in required size at site made out of 20mm rigid PVC sheet consisting of carcase & provision of shutter are required brackets 5.5 screws etc. The panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 1mm edge bend type or 900 edge bend finish as per make and specification mentioned as per drawings. Various thickness of PVC celuka sheet manufactured by ISO 9001-2015 satisfied company termite proof, water proof and flame retardant PVC sheet. PVC cabinet of required sizes fabricated by joining for 20mm rigid PVC sheet fixed with each other using solvant cement adhesive and screws and 6mm PVC sheet as backing of cabinet fixed with screws and solvent cement adhesive etc. PVC shelf/ partition of required size consisting of panel 20mm rigid PVC sheet and for supporting the hold of shelf , partition and shall provided 3 edges in sizes 20mm x20mm as per required length, The front side of the edge visible in the front of the shelf. Partition to be edge lipped by 20mm width into 1mm edge bend tape of density 600 kg per Cbm with necessary connected items like handle, hinges etc complete all as specified and directed by ENgr-in-m Charge and manufactures specifications and drawings.

M/S BIJOYA LAXMI ENTERPRISE

PERFECT BUILDERS AND SUPPLIERS