REPAIR MAINTENANCE AND REPLACEMENT OF DEFECTIVE PARTS IN RENEWAL OF BOILERS LAUNDRY PLANT INSTALLED AT CH WC UNDER GE P COMMAND HOSPITAL CHANDIMANDIR

Amount

Annual maintenance of laundry plant installed in Comd Hospital (WC) Chandimandir for 11 month including the following (i) depute a Skilled technician for 2 days Once in a month on working days except Sunday/Holidays (ii) A preventive maintenance schedule would be made for the smooth working of all equipments and AMC schedule would be discussed with Engineer -in-charge & finalized once AMC is being approved. (iii) The entire equipment will be serviced irrespective of any break down. (iv) For the maintenance of the machines the shutdown time is to be given in the day time only. (v) To carry out the preventive maintenance as per the recommended guidelines of the manufacturers. (vi) To oil, grease, and carry out general cleaning of the equipment’s every month to ensure the smooth working of the same. (vii) To replace the defective or worn out parts of the Equipment’s to ensure that the breakdown is minimized.

(viii) To carry out the preventive maintenance for the hydraulic systems and other pneumatic systems of the machines. (ix) The contractor should provide necessary lubricants at the time of servicing (x) To carry out the all quarterly, half yearly and yearly checks of the Equipment’s. (xi) To give the advance intimation for the requirements of the materials or spares needed for the machines to avoid the shut down. (xii) To provide the uniforms for technicians. (xiii) To suggest the list of critical/unique spare parts/consumables required in laundry that could be stocked by and if any spare parts are used has to bereplaced to maintain the minimum stock level. (xiv) The response time to attend break down calls by our service team is 24 hours. (i) Contractor will conclude AMC with OEM (which is SUPERSHINE LAUNDRY SYSTEMS PVT. LTD or any authorised agency approved by GE) and copy of agreement will be submitted to Engr-in-Charge and GE before commencement of AMC. No payment will be made to contractor without submission of valid AMC agreement. (ii) Contractor will provide service report of each visit (per month) of the Authorized service centre.

Repair/Replacement of door lock handle for washing manchine 100 kg complete all as specified and directed . Make : Supershine Cat part No SFL100-0051-1 or equivalent compatible with existing machinary

Repair/ replacement of ruber gasket for door of washing machine 100 Kg complete all as specified and directed . Make : Supershine Cat part No SFL100-0037-1 or equivalent compatible with existing machinary.

Replacement of FRL for washing machine 100 Kg complete all as specified and directed . Make Supershine Cat part No SFL100-0037-FR001 or equivalent compatible with existing machinary.

Replacement of Tempreture controler with probe for washing machine 100 Kg complete all as specified and directed . Make Supershine Cat part No SFL100-0037-TC001 or equivalent compatible with existing machinary.

Replacement of V-Belt for washing machine 100 Kg complete all as specified and directed . Make Supershine Cat part No SFL100-0037-VB001 or equivalent compatible with existing machinary.

Replacement of Door limit switch for washing machine 100 Kg complete all as specified and directed . Make Supershine Cat part No SFL100-0037-DL0001 or equivalent compatible with existing machinary.

Replacement of Solenoid Valve for washing machine 100 Kg complete all as specified and directed . Make Supershine Cat part No SFL100-0037-SV001 or equivalent compatible with existing machinary.

Replacement of Timer for washing machine 100 Kg complete all as specified and directed . Make Supershine Cat part No SFL100-0010-1 or equivalent compatible with existing machinary.

Replacement of O/L Contactor for washing machine 100 Kg complete all as specified and directed . Make Supershine Cat part No SFL100-0010-1 or equivalent compatible with existing machinary.

Replacement of motor winding of washing machine (5 HP) complete all as specified and directed.

Replacement of PU Pipe for washing machine 100 Kg complete all as specified and directed . Make Supershine Cat part No SFL100-0037-1 or equivalent compatible with existing machinary.

Replacement of bearing for sluicing machine complete all as specified and directed. Make Supershine Cat part No SFL25-0060-1 or equivalent compatible with existing machinary.

Replacement of FRL for sluicing machine complete all as specified and directed. Make Supershine Cat part No SFL25-0037-FR001 or equivalent compatible with existing machinary.

Replacement of Tempreture controler with probe for sluicing machine complete all as specified and directed. Make Supershine Cat part No SFL25-0037-TC001 or equivalent compatible with existing machinary.

Replacement of Timer for sluicing machine complete all as specified and directed. Make Supershine Cat part No SFL25-0010-1 or equivalent compatible with existing machinary.

Replacement of sleeves for sluicing machine complete all as specified and directed. Make Supershine Cat part No SFL25-0061-1 or equivalent compatible with existing machinary.

Replacement of V Belt for sluicing machine complete all as specified and directed. Make Supershine Cat part No SFL25-0025-1 or equivalent compatible with existing machinary.

Replacement of fuse for sluicing machine complete all as specified and directed. Make Supershine Cat part No SFL25-0010-1 or equivalent compatible with existing machinary.

Replacement of motor winding of sluicing machine (5 HP) complete all as specified and directed.

Replacement of rubber buffer for hydro extractor complete all as specified and directed. Make Supershine Cat part No SH25-0030-1 or equivalent compatible with existing machinary

Replacement of balancing spring for hydro extractor complete all as specified and directed. Make Supershine Cat part No SH25-0031-1 or equivalent compatible with existing machinary.

Replacement of timer for hydro extractor complete all as specified and directed. Make Supershine Cat part No SH25-0010-1 or equivalent compatible with existing machinary.

Replacement of Contactor 440V for hydro extractor complete all as specified and directed. Make Supershine Cat part No SH25-0032-1 or equivalent compatible with existing machinary.

Replacement of TDR for hydro extractor complete all as specified and directed. Make Supershine Cat part No SH25-0033-1 or equivalent compatible with existing machinary.

Replacement of Diode for hydro extractor complete all as specified and directed. Make Supershine Cat part No SH25-0034-1 or equivalent compatible with existing machinary.

Replacement of Door limit switch for hydro extractor complete all as specified and directed. Make Supershine Cat part No SH25-0035-1 or equivalent compatible with existing machinary.

Replacement of motor winding of hydro extractor complete all as specified and directed. Make Supershine Cat part No SH25-0022-01 or equivalent compatible with existing machinary.

Replacement of FRL of flat bed press complete all as specified and directed . Make Supershine Cat part No SFB 30-0012-1 or equivalent compatible with existing machinary.

Replacement of air solenoid valve of flat bed press complete all as specified and directed . Make Supershine Cat part No SFB 30-0012-1 or equivalent compatible with existing machinary.

Replacement of PU Pipe of flat bed press complete all as specified and directed . Make Supershine Cat part No SFB 30-0012-1 or equivalent compatible with existing machinary.

Replacement of fuse of flat bed press complete all as specified and directed . Make Supershine Cat part No SFB 30-0012-1 or equivalent compatible with existing machinary.

Replacement of angle valve normally closed with solenoid valve for drying tumbler complete all as specified . Make Supershine Cat part No SDT50-0021-1 or equivalent compatible with existing machinary.

Replacement of V belt (100B) for drying tumbler complete all as specified . Make Supershine Cat part No SDT50-VB0021-1 or equivalent compatible with existing machinary.

Replacement of Main motor bearing for drying tumbler complete all as specified . Make Supershine Cat part No SDT50-VB0021-1 or equivalent compatible with existing machinary.

Replacement of Counter shaft bearing for drying tumbler complete all as specified . Make Supershine Cat part No SDT50-VB0021-1 or equivalent compatible with existing machinary.

Replacement of Air solenoid valve for drying tumbler complete all as specified . Make Supershine Cat part No SDT50-ASV0021-1 or equivalent compatible with existing machinary.

Replacement of motor winding of drying tumbler (2 HP) complete all as specified and directed.

Replacement of steel wool for flat work ironer complete all as specified . Make Supershine Cat part No SFW132-0042-1 or equivalent compatible with existing machinary.

Replacement of scrotch brite for flat work ironer complete all as specified . Make Supershine Cat part No SFW132-0043-1 or equivalent compatible with existing machinary.

Replacement of calender waxing for flat work ironer complete all as specified . Make Supershine Cat part No SFW132-0023-1 or equivalent compatible with existing machinary.

Replacement of guide tape for flat work ironer complete all as specified . Make Supershine Cat part No SFW132-0016-1 or equivalent compatible with existing machinary.

Replacement of motor winding of Flat work ironer (5 HP) complete all as specified and directed.

Replacement of Digital Hour meter withIP66 compliant for resistance againstnegative environmental influences for 200 Kg/Hrs and 600 Kg/Hrs Boilers

Comprehensive maintenance of 200 kg/hr and 600 kg/hr capacity boiler 02 Nos each including checking, testing, arresting leakage if any and making the same serviceable including checking/replacement of belts of size as per existing. Finally report will be jointly prepared, signed and submitted on monthly basis for commissioning of the boiler after complete testing. (i) Items required to pertaining to these boilers shall be deemed to be included in quoted rate except items covered in item No 2 to 6. (ii) Contractor will conclude AMC with OEM and copy of agreement will be submit to Engr-in-Charge and GE before commencement of AMC. No payment will be made to contractor without submission of valid AMC agreement.

Sensor with DOL starter for 1000 ltr DHT/Service tank at boiler plant.

Descaling of boiler tubes of 200 kg/hr with ample amount of chemical (hydrochloric acid )

Descaling of boiler tubes of 600 kg/hr with ample amount of chemical (hydrochloric acid )

Supply and fixing of following parts suitable for 200 kg/hr boiler(SM No- 276/7002-LP/SB/03) (SM No-276/7001-LP/SB/03) including testing and commissioning for smooth functioning as directed by Engr-in-Charge.

PRESSURE SWITCH PVF-16 (FOR STEAM) Cat Part No P41PS10040

PRESSURE SWTICH PM-01 (FOR WATER) Cat Part No P41PS10010

COIL Cat Part No PRXCL10004

HOSE METALLIC BRAIDED 1" x 1.2 MTR LONG Cat Part No RI09R01004

SEQUENCE CONTROLLER MA 810 Cat Part No P42BC20020

TIMER 2-60 SEC , ON DELAY

ECONOMISER Cat Part No PRXEC10016

HEAT OPTIMISER Cat Part No PRXEC10017

HOSE METALLIC BRAIDED 3/8" x 40" LG Cat Part No P260200050

DUCT ECONOMISER Cat Part No PRXSC10010

GLAND WASHER Cat Part No P01RDS0690

VALVE SEAT ASSEMBLY Cat Part No P01RDS0320

OIL SEAL BEARING Cat Part No P01RDS0110

VALVE, SAFETY 25MM, 150-250 PSI-BRZ-IBRNC- 1"BSP Cat Part No P36SS2009M

PRESSURE GAUGE, 0 TO 25 KG 63 MM,1/4"BSP,BACK CONNECTION (FOR FUEL) Cat Part No P41PG10140

PRESSURE GAUGE, 0 TO 40 KG 63 MM,1/4"NPT, BACK CONNECTION Cat Part No P41PG10270

TEMPERATURE CONTROLLER, 0-400 (DTC 304 ) Cat Part No P44TS10070

BEARING PIECE (SET OF 2) Cat Part No P01RDS0350

NOZZLE- MONARCH, - 2.5 GPH, 45D. PLP Cat Part No P22NM10650

Feed water pump triplex (without motor) Cat part No P01RM30020

VALVE, STOP BRONZE 1/2" BSPT Cat Part P33LG20030

THERMOMETER 0-120 DEG, 63 MM DIAL,1/2" BSP Cat Part No P44TI10070

THERMOMETER 0-600 DEG,100 MM DIAL Cat Part No P44TI10080

LIMIT SWITCH Cat Part No P41ZS10010

BURNER ROD ASSEMBLY 450 LG SPO W/O NOZZLE Cat Part No PBR6200005

V BELT for 200kg/hr boiler Cat Part No P05B010070

FUEL PUMP AN 67 Cat Part No P01FS10020

IMPELLER WITH HUB Cat Part No PBR8020013

PHOTOCELL ALTERNATIVE TO 8205 Cat Part No SGPOT29100

CONTACTOR FOR ELECTRICAL PANEL

DIFFUSER PLATE 132 MM DIA

Inner jacket (with duct at bottom)

ELECTRODE ASSEMBLY

Replacement of winding of 3 phase induction motor 0.5 HP

Replacement of winding of 3 phase induction motor 1 HP

Supply and fixing of following parts suitable for 600 kg/hr boiler (SM No-276/7004-LP/SB/03) (SM No-276/7003-LP/SB/03) including testing and commissioning for smooth functioning as directed by Engr-in-Charge.

PRESSURE SWITCH PVF-16 (FOR STEAM) Cat Part No P41PS10040

PRESSURE SWTICH PM-01 (FOR WATER) Cat Part No P41PS10010

ELECTRODE ASSEMBLY Cat Part No PBR6510006

HOSE METALLIC BRAIDED 1" x 1.2 MTR LONG Cat Part No RI09R01004

TIMER 2-60 SEC , ON DELAY –S Cat Part No

SEQUENCE CONTROLLER MA 810 Cat Part No P42BC20020

ECONOMISER Cat Part No PRXEC10013

HEAT OPTIMISER Cat Part No PRXEC10014

HOSE METALLIC BRAIDED 3/8" x 40" LG Cat Part No P260200050

VALVE, BALL 3/4" BSPT (FOR BLOW DOWN) Cat Part No P35BS10080

GLAND WASHER Cat Part No P01RDS0690

VALVE SEAT ASSEMBLY Cat Part No P01RDS0320

OIL SEAL BEARING Cat Part No P01RDS0110

VALVE, SAFETY 25MM, 150-250 PSI-BRZ-IBRNC- 1"BSP Cat Part No P36SS2009M

PRESSURE GAUGE, 0 TO 25 KG 63 MM,1/4"BSP,BACK CONNECTION (FOR FUEL) Cat Part No P41PG10140

PRESSURE GAUGE, 0 TO 40 KG 63 MM,1/4"NPT, BACK CONNECTION Cat Part No P41PG10270

DUCT ECONOMISER Cat Part No PRXSC10007

BEARING PIECE (SET OF 2) Cat Part No P01RDS0350

NOZZLE 6.5 GPH, 45 DEG HO, MONARCH Cat part No P22NM20070

FILTER ELEMENT

V BELT for 600kg/hr boiler

BALL BEARING Cat Part No P01RDS0090

VALVE, STOP BRONZE 3/4" BSPT Cat Part No P33LG20040

LIMIT SWITCH Cat Part No P41ZS10010

COIL FOR RXA-06 Cat Part No PRXCL10008

CONTACTOR FOR ELECTRICAL PANEL

DIFFUSER PLATE 132 MM DIA Cat Part No PBR5730009

PHOTOCELL ALTERNATIVE TO 8205 Cat Part No SGPOT29100

TEMPERATURE CONTROLLER, 0-400 (DTC 304 ) Cat Part No P44TS10070

Inner jacket (with duct at bottom) Cat part No SGP0000957

Fuel pump Cat part No P01FS10030

Burner rod assembly Cat part No PBR6200005

Replacement of winding of 3 phase induction motor 0.75 HP

Replacement of winding of 3 phase induction motor 2 HP

Feed water pump triplex (without motor) Cat part No P01RM30020

Industrial Salt with 99.9% purity,water soluble,sutable for water treatement in water softening plant in boiler

Taking out the 100mm bore existing steel tubing/ MS pipe for cleaning fixing vertically/ horizontally on wall & relaying the same in new or old position complete with all fitting like tees, nipples, unions etc accessories laid in trenches, and laid on wall/ floor jointed tested and commissioned including treading and provision of double flanges including end cap according to new places complete all as specified and directed. Note for Sl item & : Cutting, welding of existing and new MS line alongwith flanges deemed to be included in the quoted rates. However Earthwork/excavation will be paid separately under respective items)

Taking out the 80mm bore existing steel tubing/ MS pipe for cleaning fixing vertically/ horizontally on wall & relaying the same in new or old position complete with all fitting like tees, nipples, unions etc accessories laid in trenches, and laid on wall/ floor jointed tested and commissioned,including treading and provision of double flanges including end cap according to new places complete all as specified and directed. Note for Sl item & : Cutting, welding of existing and new MS line alongwith flanges deemed to be included in the quoted rates. However Earthwork/excavation will be paid separately under respective items)

Taking out the 50mm bore existing steel tubing/ MS pipe for cleaning fixing vertically/ horizontally on wall & relaying the same in new or old position complete with all fitting like tees, nipples, unions etc accessories laid in trenches, and laid on wall/ floor jointed tested and commissioned including treading and provision of double flanges including end cap according to new places complete all as specified and directed. Note for Sl item & : Cutting, welding of existing and new MS line alongwith flanges deemed to be included in the quoted rates. However Earthwork/excavation will be paid separately under respective items)

Taking out the 40mm bore existing steel tubing/ MS pipe for cleaning fixing vertically/ horizontally on wall & relaying the same in new or old position complete with all fitting like tees, nipples, unions etc accessories laid in trenches, and laid on wall/ floor jointed tested and commissioned including treading and provision of double flanges including end cap according to new places complete all as specified and directed. Note for Sl item & : Cutting, welding of existing and new MS line alongwith flanges deemed to be included in the quoted rates. However Earthwork/excavation will be paid separately under respective items)

Taking out the 25mm bore existing steel tubing/ MS pipe for cleaning fixing vertically/ horizontally on wall & relaying the same in new or old position complete with all fitting like tees, nipples, unions etc accessories laid in trenches, and laid on wall/ floor jointed tested and commissioned including treading and provision of double flanges including end cap according to new places complete all as specified and directed. Note for Sl item & : Cutting, welding of existing and new MS line alongwith flanges deemed to be included in the quoted rates. However Earthwork/excavation will be paid separately under respective items)

Supply and fixing in replacement gun metal gate valves class-II ISI marked, with iron wheel head, screwed both ends for any types of pipe and fixed all as specified of following size :- Leader/SANT/Kartar

50 mm bore

40 mm bore

25 mm bore

Replacement of Thermal insulation on 100 mm pipe which includes glass wool with fibre glass tissue of density 48 kg/m3 with Vibration and Jolting Resistance: Conforms to BS 2972, Moisture Content: Less than 2% in accordance with BS 2972, Water Absorption: Less than 2% in accordance with BS 2972, Shot Content: Nil in accordance with BS 2972, Odorless: Conforms to BS 2972, No Mould Growth: Conforms to BS 2972 wrapped with chicken mesh, Covered with Aluminium sheet with applied moisture barrier of 3 mil thick Polysurlyn coating with 0.71 mm thickness as per IS:737 code.

PARTAP ENGINEERING WORKS

M/S W R traders