Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.4 LAccepted-AOC BAIRGOCHH P O CHATHAT DIST DARJEELING W B | CHATHAT | DARJEELING | WEST BENGAL | 734434 | L1 | Accepted-AOC L1 | |
| 2 | L2₹26.2 L+₹2.2 L (9.40%)Rejected-AOC 37 222 BUNDU KATRA AGRA UP | AGRA | UP | L2 | Rejected-AOC L2 |
Tender Value
₹31.5 L
EMD Value
₹63,000
Closing Date
17 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Bharatpur
Kanjoli Line Bharatpur
Provn of certain sanction work Part- III at 39 FAD Bharatpur Mil Stn
2022_MES_546843_1
8190/E8
Open Tender
Civil Works
Item Rate
180 days
GE Bharatpur
as per tender document
6 documents required · 6 mandatory
₹500
GE Bharatpur
₹63,000
Yes
9 Nov 2022
22 Aug 2022
24 Sept 2022
22 Aug 2022
17 Sept 2022
4 Sept 2022
24 Aug 2022 - 30 Aug 2022
Amount
Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth, for foundation etc and getting out in soft/loose soil complete all as specified and as directed.
M&L PCC 1:4:8 type-D2 (40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.
M&L for broken stone or boulders in hardcore of gauge exc 63 mm but n exc 100 mm deposited spread and levelled in layers n. exc 15 cm thick watered and rolled/rammed to a true surface complete all as specified and as directed by Engineer-in-Charge
M&L Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.
M & L for cement concrete ( 1:2:4 ) type B1 using 20 mm graded stone aggregate as in surface channels and drains and benching including finishing the top of benching even and smooth using extra cement Note : Forming fair finished channel for drain using extra cement will be measured and paid for separately.
Returning Filling in,including spreading, levelling, watering and well ramming in layers, not exc 25 cm in soft/loose soil complete all as specified and as directed..
Removing excavated material n exc 50 m and depositing where directed at level n exc 1.5m above the starting point complete all as specified and as directed.
Spreading and levelling in layers n exc 25 cm thick well ramming including watering as required complete all as specified and as directed.
M&L for sand filling under floors or in foundation including watering and consolidation
M&L RCC Design Mix( M- 25 ) using 20mm graded stone aggregate for Foundations, including rafts, footings, foundation beams, plinth beams, roof beam bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed
M&L RCC Design Mix( M- 25 ) using 20mm graded stone aggregate for column/pillrs,piers,post and struts complete all as specified and as directed
M&L RCC Design Mix( M- 25 ) using 20mm graded stone aggregate as in slab supported oin walls, beams and columns in floors , roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batte
M&L Formwork to sides and soffits of floor or roof beams ,beam plinth beam haunchings, girders, bressummers, lintels, cantilevers,shelves including supports, overhangs, etc also splays between floors and beams, etc for rough finished flat surfaces of concrete.
M&L Formwork to sides of pillars, posts, struts, piers, columns and stanchions
M&L Form work to soffits of suspended slabs such as roof slabs, floor slabs,landings and similar works : not exceeding 200mm thick (horizontal or sloping) for flat rough finished surfaces of concrete.
M&L Form work to edges of concrete flats, treads,breaks in floors, window cills, concrete railing, openings in concrete walls, floors and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls,horizontal or sloping and similar work exc 10cm but n exc 20 cm wide for rough finished surfaces of concrete.
S&F MS TMT bars,10 mm dia and over, cut to length, bent to shape required, including cranking,bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed)not less than 0.9mm dia or securing with clips complete all as specified and as directed.
Ditto all as per item above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders,
M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and as directed
S&F Steel ventilator with top hung shutters including projecting hinges steel peg stay, complete all as specified and as directed
S&F 3mm Figured glass, pin head type and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.
M&L Rendering 15mm thick in cement mortar 1:4 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed
M&L rendering 15mm thick in cement mortar 1:6 on other than fair faces of brick or concrete surface of wall and surface to be finished even and smooth with out using extra cement
M&L for Rough Cast Plaster on exterior walls in two layers, under layer 10mm thick in CM 1:4 (1 cement : 4 coarse sand) on fair faces of brick work or concrete surfaces, furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1:1 (1 cement : 1 coarse sand : 1 stone chipping 6 to 12 mm nominal size) in panels including scrubbing and washing the top layer with brushes and water to expose the stone chippings complete all as specified.
M&L rendering 10mm thick in CM 1:4 on concrete surfaces/ chajja/ ceiling, etc finished even and smooth without using extra cement complete all as specified and as directed
Forming square grooves in plaster n exc 12mm deep and n exc 15mm on face
M&L 25mm thick PCC 1:2:4 type B0 (12.5mm graded stone aggregate) as in floor and finished rough to recive the floor tiles etc complete all as specified and as directed.
M&L 75 mm thick PCC 1:4:8 type D-2 using(40mm graded stone aggregate) as in sub base of floors complete all as specified and as directed.
M&L forNon - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile and laid over 15 mm CM 1:4 screed bed complete all as directed
M&L for Glazed ceramic glossy digital tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick colored as in dado/ skirting and vertical surfaces set&jointed in neat cement slurry and pointed in colored cement 0ver and incl 10 mm thick cement mortar 1:4 to match the Shade, pattern, laying etc of tiles as directed at site
S&F GI tube medium grade with all fittings and fixed to walls or laid in floors of 15mm bore complete all as specified and as directed
S&F GI tubes medium grade with all fittings and fixed to walls or laid in floors of 20mm bore complete all as specified and as directed
S&F GI tubes medium grade with all fittings and fixed to walls or laid in floors of 25mm bore complete all as specified and as directed
Cutting chases for concealed water tubing or concealed conduit & making good in CM 1.3 of girth exc 10 cm and n.exe 20 cm in brick wall complete all as specified and as directed.
Supply and fixed Vitreous China wash basin white flat back size 450x300 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia,PVC flexible wastepipe of adequate length and dia and PVC connection 15mm size 450 mm length with brass CP nuts on both sides,.
Supply and fixing 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated , screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed.
S&F 600mmx450mmx6mm bevelled edge mirror mounted in 40mm wide PVC frame of approved size and colour on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed
S&F PVC (SWR) pipes 110 mm diasingle socketed in any length with rubber ring joints using solvent adhesives fixed to walls complete all as specified and as directed
-Ditto- all as per item No 41 above but 75mm bore including Rubber ring joint with solvent adhesives complete all as specified and as directed
S&F PVC (SWR) bends 110mm dia any radius
S&F PVC (SWR) junction single,(Single T) equal or unequal 110mm dia
S&F PVC (SWR) bends any radius provided with access door of 75 mm dia
S&F PVC (SWR) vent cowl of 75mm dia
M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete.
S&F 75 mm bore PVC (SWR) floor trap,plain with grating including jointing to waste pipe, all as specified
M&L Prepration of new plastered surfaces of wall and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and as directed
M & L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper using hand roller over 3 mm thick wall care J K birla putty of approved shade/tint over a coat of alkali resistant primer complete all as specified & as directed.
M&L Prepration of new plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed
M&L for Prepration of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.
M&L for prepration of new steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed
M&L 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection/path laid in panel surface finished even and smooth using extra cement complete all as specified and as directed
S&F rotational moulded PVC water tank triple layered (cylindrical vertical with closed tap) 500 ltrs capasity hoisted and fixed in position all as specified in SSR Part-1
S&F 20mm Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed
S&F 20mm bore ball valves high pressure of brass with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed of 20 mmdia (min weight-210 gms)
M&L Vitreous china urinal half stall type, white with grating and union for discharge pipe incl providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in cement ; fixing waste pipe, grating and union for discharge pipe complete all as specified and as directed
M&L for PCC (1:3:6) type C-2 (using 40 mm Graded Aggregate)as in foundations,filling and mass concrete complete all as specified and as directed.
M&L Concrete bed in Cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate to drain pipe 150mm bore incl packing under the haunching againts the sides after they are laid and tested complete all as specified and as directed.
S&F Salt Glazed Stoneware 150mm dia drain pipe laid in trenches and jointed in cement mortar 1:1 complete all as specified and directed
Deformed or twisted TMT bars 6 to 8mm dia cut to length bent to shape required incl cranking bending and binding with mild Steel wire (annealed) not less than 0.9mm dia all as specified.
Supply and fixing Vitreous China wash down water closet pan pedestal pattern white incl fixing bolts,include S&F white coloured plastic seat cover,CP brass jet nozzle with 1200mm long PVC pipe of suitable dia complete all as specified and as directed
S&F chromium plated health faucet fixed with EWC as per sample approved by GE.
S&F toilet paper holder of brass chromium plated fixed to wall with brass screws complete all as specified and directed,
S&F PVC connection 15mm dia and 450mm long with both ends brass fly nut complete all as specified and as directed (Make Prayag/Polytuf)
S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms)
S&F in repair PVC valve less, syphonic action type flushing cistern of 10 ltr capacity, low level with inlet, ball valve, float and handle including brackets incl 15mm bore PVC connection with CP brass nuts on both sides complete all as specified and as directed .
M&L for 50 mm thick sand stone slab as mainhole cover complete all as specified and as directed by Engineer-in-Charge.
S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing
S&F Factory made soild panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and gap insert for top and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, all as per specification and drawing..
S&F aluminium anodized barrel tower bolt of extruded section of size 150 mm long
S&F Aluminium anodized handle handles 150mm long
S&F aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) & fixing clips of sheet, cast and extruded section & fixing bolt & sliding bolt of extruded section of size 300mm long
S&F 75 mm butt hinges , heavy duty weight ,cold roll mild steel all as specified
S & F of Butt hinges, 100mm size extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete all as specified and as directed by Engineer-in-Charge.
S&F angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle and , screwed both ends for iron pipe or for unions and fency type chromium plated fixed
S&F bib tap cast copper alloy CP brass 15 mm bore complete all as specified
S&F CP Brass stop cock 15 mm dia fency type chromium plated with long sank and cup concealed type complete all as specified.
S&F Gratting 125 mm dia with waste hole of PTMT (Min weight 40 gms)
S&F CP Brass shower rose 125mm of size with or without swivel joints any size,including fixing to steel pipe or union complete all as specified and as directed
Provn of 10 user Hume pipe septic tank designed to carry sewage and sullage water, excavation in any type of soil , PCC 1:4:8 below foundation, vent shaft connection etc. complete all as specified and directed
S&F 150 mm dia reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and as directed by Engineer-in-Charge.
M&L for concrete bed to 150mm dia drain pipes in cement concrete 1:3:6 type C-2 incl. packing under and haunching against the sides of pipes after laid and testing complete.
M&L 60 mm thick Machine pressed precast concrete interlocking paver block with grey cement and no pigment of shape and size as approved by GE confirming to IS 15658-2006, M-35 Grade complete all as specified and directed by Engineer In-charge
M&L for 60 mm thick Machine pressed precast concrete interlocking paver block with M-35 grade of shape and size as approved by GE conforming to IS 15658-2006 with grey cement and colour pigment complete all as specified and directed by Engineer In-charge
M&L for 150 mm thick cement concrete (1:3:6) type C-2 (using 40 mm stone aggregate) as in circular raised platform of dia 20cm more than the external dia of water tank and finishing surface even and fair (without using extra cement) complete all as specified.
Provn of Soakage wells exc, in ordinary Soil, Foundation in PCC 1:3:6, wells of Honey combed and solid in M-25 Concrete,including intercepting chamber,screen chamber Brick work in CM, RCC cover slab in M-25 / Filling with brick bats,complete of size 1.8 M dia X 3.0 M deep
M&L for preperation of concrete /brick surface clean and firm,free from dust releasing agent,grease,wax,paint and other contaminant and wet the surface before applying of plaster and 20kg of polimer powder mix with 5-7 ltr water and applying 5mm thick on brick surface properly and all as specified and as directed by Engr-in-charge.Make:Ultra tech,Birla
Cutting or uprooting grass Cutting or uprooting grass on old mud phuska, removing rubbish off the premises, cleaning surface and preparing to receive new treatment complete all as specified and as dierected by Engineer in charge
M&L for 40mm thick PCC type B-1 (1:2:4) using 20mm graded stone aggregate with integral water proofing compound as per manufacturer specification with galvanised chicken wire mesh of size 12mm & .90mm dia and ensuring a gradient min 1:80 towardes drain. After the application of screed , provide control joints along the length and breath of entire screed area . The joints can be provided by using a saw cutting machine attached with a 3mm blade, The joints will be 12mm deep . 28-30days later the joints shall be filled with elastomeric sealent as per manufacturer's instruction.
M&L for screed bed or bedding layer of cemnt mortar 1 : 4, 20mm thick finished even and smooth without using extra cement all as directed by Engineer-in- charge.
M&L for preparing surfaces for roof treatment by removing all loose gravel, dirt,oil, grease and foreign matter by jet of dry air and clean the surfaces mechanically or by grinding to make it smooth before application , rerpair all cracks by cutting V groove and fill with PMC mortar ( polymer modified cement mortar ) prepared in ratio as per manufacturers specification provide 75mm x 75mm coving made out of PMC mortar as above on all joints of vertical upstand to ensure that moisture content in the prepared surfaces does not exceed 5% immediately before application of liquid membrane. Material incorporation & PROTECTION BE PROVIDED AS TERRASHEILD FIRST APPLY WITH WATER ( RATIO TERRASHEILD: WATER will be 4 : 1) as primer with coverage area 0.1kg per sqm. After 2-3 hours later, second step apply directly first coat of terrasheild .30 to .40 mm thickness coverage area .5 to .75 kg per sqm with roller. spread non woven geo textile of 40/50gsm with overlap of 50mm in both direction when the surface is still tacky. After 4-6 hours later, apply third step apply directly second coat of terrasheild .30 to .40 mm thicknbess coverage area .5 to .75 kg per sqm with roller. Final thickness of complete treatment should be min 1.0mm. water tank and khurra location one additional coat of terasheild .30 to .40 mm thickness coverage area .5 to .75 kg per sqm be provideds. after complete application will be done authorised applicator from manufacturer and manufacturer's applicatiuon. Make IWL/STP/Piddilite.
M&L for cement plaster in ratio of 1:4,average 15mm thick on ceiling all as specified and directed by Engr in charge
M&L for GI wire netting 0.90mm dia and 12mm mesh lathing to wood or concrete or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste complete all as specified and directed
M&L for Preparation of new plastered of any description not otherwise described over 10cm girth or width and applying two coat of plastic emulsion paint on any type of surface complete all as specified and directed by the Engr-in-Charge.
M&L for Preparation of old painted surfaces of any description not otherwise described over 10cm girth or width and applying one coat of plastic emulsion on wall complete all as specified and directed by the Engr-in-Charge.
Demolition of cement concrete (un-reinforced) in ground floors and pavings n.exc 15 cm thickness (below or above GL) complete all as specified and as directed by Engineer-in-Charge
M&L for 75mm thick Cement concrete type B-1, 1 : 2 : 4 (20mm graded aggregate) as in floors, pavings etc and finishing even and smooth ( without using extra cement ) complete all as specified and as directed by Engineer-in-Charge
M&L for Preparation of old decorative concrete, plastered/ un-plastered surface of wall including cornices, pilasters etc by brooming down, steel wire brushing ,scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots removing nails and filling small holes by putty and prepare the surface and applying one coat of cement based paint of approved colour in camouflaging pattern complete all as specified and as directed by Engineer-in-Charge.
M&L for preparation and two coat of synthetic enamel paint over old steel & iron Surfaces of any description, over 10cm in width or girth,all as specified and directed by engineer in charger
Removing building materials to a distance of 1Km or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination
Taking down cement plaster on brick or stone walls or concrete wall, etc. including raking out joints, hacking for key, scrubbing down with water, etc.
Rendering 15mm thick cement plaster in 1:4 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra lime or cement as specified and directed
M&L for greasing and easing of rolling shutter of size not exc 13 Sqm alongwith the guide channel, helical spring, anchoring rod and all other as to work the shutter in easy way and all as directed
Excavation in trenches in soft/loose soil not exceeding 1.5m wide and not exceeding 1.5 metre in depth and getting out for laying of cable etc. complete all as specified and as directed.
Returning, filling in soft/loose soil including spreading, levelling, watering and well ramming, in layers not exc 25 cm complete all as specified and as directed.
Removing of surplus soil to a distance not exc. 50 metre and depositing where directed at a level not exc.1.5 metre above the starting point complete all as specified and as directed.
Taking out of old unsv earthing from existing position , dismantling the same complete.
Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by mean of GI strip 32x6mm as earthing lead by means of bolts, nuts check nuts and washers of GI or steel and connecting to earthing test point, main switch board, testing on completion including GI pipe 20 mm dia light grade for watering and bringing the same upto 30 cm above normal ground level with plug at top including pipe fittings etc complete and GI pipe 40 mm dia light grade for the protection of GI strip upto 1.5 Meter complete including necessary excavation and earth work in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance n.exc 50 m all as specified as shown in electrical plate No 3 SSR Part-I. Note: earth pit cover is to be made 10mm MS Plate with the projection to overlap the four side of the road covered up to 10 cm with collapsable MS Handle including taking out old unserviceable earthing.
Taking down old Unserviceable aluminium strip from roof and wall of ESHs any size and position including making good to disrurbed surface of wall and roof complete all as specified and as directed by Engineer-in-Charge.
Refixing of serviceable aluminum strip 25x3 mm complete as obtain from above item 7 with on new saddle / insulators, including straightning and fixing screws/accessories for roof and down conductor complete all as specified and directed by Engr-in-Charge. Note: (a).Fixing of serviceable insulators will be deemed to be included with quotade rate. (b). Rate of new insulators shall be deemed included in quated rate .
S&F aluminium strip of size 25x3 mm complete with insulator/saddle and fixing with screw/accessories for roof and down conductor complete all as specified and as directed by Engineer-in-Charge. Note: Rate of insulators shall be deemed included in quated rate .
Taking down old Unserviceable GI strip from wall or buried in ground or any other indicated situation including making good to disrurbed surface complete all as specified and as directed.
Refixing of serviceable GI Strip 32x6mm as obtain from above item 11 fixed on wall or buried in ground or any other indicated situation complete all as specified and as directed
S&F GI Strip 32x6mm fixed on wall or buried in ground or any other indicated situation complete all as specified and as directed
Taking down old Unserviceable air termination rod of any size and capacity complete all as specified and as directed by Engineer-in-Charge.
Refixing of serviceable Air termination rod as obatin from Item No 4 above including new threading and grinding of tip of air termination as per site requirnment and directed by Engr in charge complete.
S&F single pointed air termination aluminium rod 12 mm dia and 300 mm long including connection with washer and protection sackle type insulator for ASCR conductor complete all as specified and as directed by Engineer-in-Charge.
M&L for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw
Taking down old Unserviceable GI pipe of 40mm size complete all as specified and as directed.
S&F GI pipe light grade 40 mm dia for protection of GI strip complete all as specified and as directed by Engineer-in-Charge.( for strip protection)
S&F in replacement of old unserviseable DMC insulator for conductor for 25 X 3/3.15 mm strip with one meter intervel secured with suitable screw complete all as specified and as directed.
S&F DMC insulator for wall down conductor for 32 X 6 mm strip with one meter intervel secured with suitable screw complete all as specified and as directed by Engineer-in-Charge.
M & L for stay assembly to support GI pipe for Air Termination by providing 4mm dia GI wire 15 RM, 16mm MS Rod 1.35 RM and PCC block 1:3:6 size of 0.6x0.6x0.15M including dismantling old Stay assembly all as directed by Engr-in-Charge.
S&F GI pipe medium grade 40 mm dia for protection of GI strip complete all as specified and as directed by Engineer-in-Charge. ( For ACSR conductor pole)
S&F in replacement Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and as directed by Engineer-in-Charge
Supplying and stringing Aluminium conductor, steel reinforced (ACSR) any type of ACSR conductor for airtermination points supported by GI tubing on the roof of the ESHs to inner connect the all termination points including taking down of existing conductor complete all as specified and as directed by Engineer-in-Charge. (Notes : (i) The ACSR conductors shall be conforming to IS-398 and as specified in SSR Part-I.(ii) The unit rate quoted shall also be deemed to include for supply & fixing of aluminium binding wire, aluminium tapes etc which shall not be included in the weight of conductors.(iii) Weight of conductors shall be determined by measuring true horizontal distance between centers of two adjacent poles and compounding the weight of conductors of that size and length and 3% extra added for sag, jointing, jumpers etc. (iv) Weight of the conductors shall be calculated from the nominal weights given in tables in the relevant IS.)
M&L of PCC 1:2:4 type B-1, 20 mm graded aggregate filling and mass concrete, for road finishing, PCC blocks, earthing pit cover, and foundation concrete complete all as specified and directed by Engr-in-Charge.
Taking down of old unserviceable copper / aluminium flame proof point wiring (light,socket) with conduit complete including fitting & fixture such as switches, ceiling roses, light fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperately) and making good disturbed surfaces of walls, floors etc complete.
Taking down old U/S sub main wiring
M&L surface point wiring complete with two runs of 2.5 sqmm, single core multi stranded copper conductor PVC insulated and unsheathed FRLS cable, 1100volts grade IS-694 marked drawn through and including rigid steel ERW conduit min 20mm dia ( stove enameled) heavy duty as per IS 9537 Part I and including all necessary flame proof , weather proof conduit accessories and fitting fixed to concealed in wall/ceiling with teflon tape sealed in all threaded joints in conduit and fittings for light points and including 2.5 sqmm (or nearest equivalent Metric size) single core multi stranded copper conductor PVC insulated and unsheathed cable 1100 volts grade continuity wire (connecting to earth dolly) & wiring shall be suitable for flame froof area as per STEC-7 for Two light points controlled by one switch/MCB
M&L submain wiring in surface conduit complete with 2.5 Sqmm single core multi standred PVC insulated and sheathed cable FRLS copper conductor two runs and one run of 2.5 Sqmm copper cable for earth continuity conductor complete all as specified and directed. Note :- Two runs of single core of 2.5 sqmm, one run of 2.5 sqmm earth continuity conductors shall be measured as one unit run length.
Supply and fixing in replacement of factory made mild steel flame froof distribution boards, class LM-6 , protection class (IP-55) CMRI certified suitable for gas group IIA & IIB suitable for mounting MCB/RCCBs, DBs TP&N 4 way, 415 volts conforming to IS-2143 with minimum 200A rating copper bus bar comprising of following :- (i) lighting distribution panel (ii) Incoming:- MCB, 4P 63Amp -01 No (iii) Outgoing :- MCB 1P 6Amp -12 Nos (MCB-L&T/Schneider or equivalent make) with complete internal Bus bar & wiring up to terminals. Make :- Cart part no SSPL/RCP/109 of shyaam switchgear (P) Limited or equivalent model of flexpro/Bajaj/Crompton Greaves as approved by GE complete all as specified and directed.
Supply and fixing in replacement of LED flameproof tube light fitting CMRI certified 1x20W LED tube light fixture complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cbale with suitable size of Cat Part No SSPL/FF/1271 lamp of shyaam switchgear (P) Limited or equivalent model of flexpro/Bajaj/Crompton Greaves as approved by GE complete all as specified and directed.
Supply & Fix & connecting totally enclosed CMRI Certified in replacement of LED flameproof wellglass suitable for hazardous area laden with gases or vapours of Group of IIA & IIB and Zone 1&2. Die Cast Aluminum housing with heat resistant toughened glass /dome glass/ external reflector 40W including matching control gears and lamp complete of Cat Part No FWL1315-40-CDL/HB lamp of Crompton Greaves of equivalent model of Flexpro/Bajaj/shyaam switchgear (P) Limited
Supply and fixing in replacement of switch flame proof rotary type with termination box in LM6, 16 Amps single pole, 250 volts epoxy painted.
Supply & spread unwashed dry river sand for sand cushioning and covering the under ground cable in trenches. (Note :- Punning thickness shall be measured.)
M&L for brick protection with sub Class`B` bricks old size laid dry, flat over cable perpendicular across the cable in trenches complete all as directed.
Supply, laying, testing & commissioning LT XLPE insulated armoured (heavy duty) electric cable with stranded aluminium conductor 1100 volts grade (ISI marked) & laid in trenches/pipes or fixed on pole of the following sizes:- 10 Sqmm 2 core
S&L pipe galvanised light class complete including fittings 40mm dia
M&L for road cutting in 300mm width & 450 mm depth & repair to existing with bitumen premixed incl 150 mm BM complete all as specified and directed by Engg in charge
M&L point wiring complete with 1.5 Sqmm 02 x single core multistranded copper conductor of 1100 volts grade PVC pre insulated FRLS and unsheathed cable enclosed in PVC conduit pipe with all PVC accessories such as Tee, bend, collar, elbow, square junction box etc fixed on the concealed surface of wall/ceiling by means of PVCsleevel/dash fastners with cadmium plated screws including suitable size of PVC boards/ existing sunken box for mounting fittings like switches, sockets, fan regulator etc including 1.5 Sqmm insulated but unsheathed copper earth continuity conductor to common earth and connedcted to earth dolly complete all as specified and directed for the following :- One light point controlled by one way switch.
One fan point controlled by one way switch.
One 3 pin 6 Amp socket point outlet on the same board with other switches
One 3 pin 6 Amp socket point outlet on the independent board
S&F ceiling rose surface bakelite 50 x 40 mm three terminal ISI marked including suitable size of PVC board.
S&F socket outlet 2 in 1, 3 pin 5 Amps multi purpose flush type 230 volt .
S&F switch piano flush button single pole one way 6 Amps 230 volt grade.
Distribution board factory made and tested made of sheet metal enclosure powder coated suitable for mounting the MCB 415/240 volt of the following DBs :-. 4 way SPN with 200 amps rated busbar 240 volts (double door type).
8 way SPN with 200 amps rated busbar 240 volts (double door type).
S&F MCCB, MCB with GI hardware fixed in DB's of the undermentioned type and rating. MCB SP 240 volts 6-32 Amps C Curve
MCB SPN 32 Amps, 240 volt C Curve
S&F Linear LED T8 tubular lamp of 20 watt with extruded aluminium body,PC diffuser and inbuilt driver including compact batten suitable for LED T8 lamps , complete with all accessories internally pre-wired and including connecting to ceiling rose with three core flexible copper conductor cable of size 1Sqmm Make Crompton or equivalent in Bajaj/Havells/Philips/Crompton.
Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings
S&F 35 watts LED street light fitings new generation energy saving, environmental friendly, long life, versatile pressure die cast aluminium IP66 with 10KV surge protection road way, luminaire with high power LED as light source with warranty option of 5 years and suitable drivers etc and connecting with 4.0 sq mm multistranded aluminium conductor PVC insulated twin core weather proof cable from fittings to over head lines or to the jucntion box and fixing to complete all as specified and directed , Make :- Crompton / wipro / Bajaj / Philips.
S & F street light GI bracket of 1.2 mtr long made out of 40mm dia light grade GI pipe bend to shape of 120 degree end welded at required including 02 Nos MS clamp of FL 40 x 6mm including nuts bolts & washers complete necessary fixing arrangements on pole as directed.
S&F exhaust fan of 300 mm sweep 900 rpm with suitable size of MS louvers duly painted , connecting wire PVC insulated twisted flexible 0.5 sqmm copper conductor including all standard accessories complete all as specified and as directed by Engineer -in-charge . Make: Havells/bajaj/cromption/polar etc
S&F GI tubing medium grade ISI marked including all fittings laid in trenches / fixed on wall of size 40 mm bore, excavation shall be measured and paid under item No 117, complete all as specified and directed.
S&F GI tubing medium grade ISI marked including all fittings laid in trenches / fixed on wall of size 20 mm bore, excavation shall be measured and paid under item No 117 complete all as specified and directed.
M&L of gun metal gate or globe valves with iron wheel head (ISI Marked), screwed both ends for iron pipe and fixed of size 20 mm bore
M&L of MS clamp /saddle piece made out of MS flat iron suitable to make ferrule and clamping for branch connections complete with GI socket welded it on one FI strip suitably positioned at the centre of pipe including drilling as per site requirement complete with MS nuts, bolts, washers and rubber packing for complete of size 100/80 mm pipe all as specified and directed.
Earthing complete with Galvanised steel earth plate electrode 600 x 600 x 6 mm buried directly in the ground vertically to depth not less than 3 Mtr below the ground level with the top edge of earth plate, depth not less than 2.25 Mtr below the ground level connected to connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts and washers protected by GI tubing light grade 40 mm dia uptoTest point 20 mm dia watering pipe with funel & wire mesh, PCC pit in PCC 1:2:4 using 20 mm stone aggregates chamber 40 mm thick RCC cover slab (1:2:4) type B-1 using 20 mm graded stone aggregates complete all as specified and shown in electrical plate No.3 of SSR Part-I including earth work in any type of soil ,removal of surplus sil and providing charcol dust & salt layers all around the earth plate upto 15 cm all as required specified & directed by engr in charge ( Note:- Up to 7.5 Mtr length of pipe of 40 mm dia and GI strip shall be deemed to be included in unit rate quoted by tenderer GI pipe and GI strip beyond 7.5) will be measured separately under respective item.
PD GUPTA AND COMPANY
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .