Provision of drainage and strengthening work of MLTD Bund at km 16.965 Jyonar village road gap in District Balrampur

Amount

Dry Earth work in excavation for building / civil structure / apron including lead upto 30.00 m and lift upto 1.50 m and its disposal.

Laying C.C. in 1:3:6, M-10 in Foundation with 20-40 mm size Stone ballast & coarse sand including cost of all material, labour and T&P

Supply and Laying of NP.-3 (1200 MM) R.C.C. Pipe including all cost of material labour T&P etc.

Laying and fixing in position and alignment excluding excavation back filling and cost of material. Hume pipe 900 mm NP-3

Laying and fixing in position and alignment excluding excavation back filling and cost of material. Hume pipe 1000 mm NP-3

First class Brick work in 1:4 cement and fine sand of 1.25 F.M. Mortar in foundation and plinth including supply of all materials labour and t and p etc. required for proper completion of the work .

Dry earth filling including ,manual compaction dressing lead upto 30.00 m and lift upto 1.50 m in building and masonary works .

Earth work in filling by power transport for a lead of upto 1km including excavation loading unloading , stacking and manual compaction and dressing including all lift shall be applicablefor lead beyond 630 m upto 1 km excluding royalty .

Dry Brick on edge soling with first class bricks including labour preparation of sub grade & filling joints local sand and including cost of sand and T&P required for proper completion of work.

Supply & fabrication and fixing of mild steel/ iron work in grill , gates , railing , door, windows, frames, including cutting , drilling , welding , riveting , and fixing hinges where neccessary with fixing in position including cost of all material , labour , Tand P etc. required for proper completion of work with one coat of red oxide primer.

Replacing of bottom rubber seal as per is code 11855 by removing old damaged side rubber seal from gate scraping and cleaning of surface making holes fixing and clamping the ms plate by new counter sunk head high tensile bolts nuts and washers making adjustment as per requirement of site including cost of all material labour and t and p required for proper completion of work . for size 100 mm x 20 mm .As per prayagraj ID SOR Ch xxv item no 6

SHRI KANT MISHRA CONTRACTOR (BID ID -5206442)