SPL REPAIR TO REPLACEMENT OF BER ITEMS (CEILING FANS, DESERT COOLER, WALL FANS AND EXHAUST FANS) OF AGE E/M-II AND ADDN/ALTN OF BUILDING NO P-322 (FIRST FLOOR) OF SINGLE LIVING (OTM) ACCN FOR ONE PROVOST SECTION OF WOMEN MILITARY POLICE OF 22 RAPID (

Amount

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc complete all as specified & directed.

M&L brick work with fly ash bricks straight or curved on plan exc 6 m mean radis built in CM 1:6 complete all as specified & directed.

All as per iten No 2.00 here-in-before but except bricks complete all as specified & directed.

M&L Form work to sides and soffits of beams lintels etc finished fair complete all as specefied and directed.

Supply & fix mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and including binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

All as per iten No 5.00 here-in-before but TMT bars 6 mm dia and over upto and including 10mm dia as in stirrups complete all as specefied and directed.

M & L RCC 1:2:4 Type B1 using 20 mm graded stone aggregate as in beams, lintels over 1.5 m span etc complete all as specefied and directed.

Supply and fixing 06mm thick hollow insulated PVC wall lining consisting of PVC insulated panels having expended polystyrene (EPS) fitting into the wall by using nail etc complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons, wall laid and pointed in any mortar etc. Complete all as specified and directed.

M&L Non skid ceramic coloured tiles 7-8mm thick (Square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18 Sqm in floors set and jointed in neat cement slurry and pointed with white or colour cemnt to match including 15 mm thick screed bed in cm 1:6 complete all as specified & directed.

S&F vetrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement over 15mm screed bed in CM 1:6 complete all as specified and directed.

S&F vetrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm but not exceeding 0.36 sqm, as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement over 15mm screed bed in CM 1:4 complete all as specified and directed.

S&F Coloured Glazed ceramic tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM(1:4) joint free with grout of matching shade complete all as specified & directed.

M & L for Udaipur green stone not less than 16 mm thick factory made bull nosed, pre polished (table rubbed and polished) as in jambs, window cill, cooking plateform and the like etc in CM 1:4 including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of stone and making hole for gas pipei complete all as specified and directed.

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified & directed.

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqn each complete all as specified & directed.

Material and labour for anodised aluminium door shutterswith/ without sash bars, aluminium sections weighing 0.55 Kg/m(min) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading,screws suitable anodised fittings such as, hinges, handles, including anodised aluminium frame with one or more rebates including Supply and fix 5 to 6 mm thick figured glass pin headed type all fixed to frame complete all as specified and directed.

S&F 10mm Toughned glass as in fixed glass, hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes and all fittings for doors and windows and partitions complete all as specified & directed.

Material and labour for anodised aluminium partition wall sections weighing 0.55 Kg/m(min) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading,screws suitable anodised fittings, including anodised aluminium frame with one or more rebates including Supply and fix boards all fixed to frame complete all as specified & directed.

Material and labour for anodised aluminium partition well sections weighing 0.55 Kg/m(min) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading,screws suitable anodised fittings, including anodised aluminium frame with one or more rebates including 5 to 6 mm thick frosted figured glass, pin headed type all fixed to frame complete as directed by Engr-in-charge.

Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing shown in SSR Part-II (2020).

Supply and fix rolled mild steel as in Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

S&F powder coated anodised aluminium windows sliding type (3 shutter type) with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl stainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, with one or more rebates including S&F 5.50 mm thick figured glass pin headed type complete all as specified and directed.

S&F powder coated anodised aluminium Ventilators fixed type with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl stainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, with one or more rebates including S&F 5.50 mm thick figured pin headed glass complete all as specified and directed.

M&L Framed work such as grills, angle grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-290 Gde-165 complete all as specified & directed.

M&L 18/19mm thick WPC Solid board, exterior grade, prelaminated one side with decorative choice laminations and other side balanceing white lamination, fixed with SS screws to WPC frame work in cup boards, and kitchen cabinet rebated including hinges and necessary fittings complete all as specified and directed.

M&L hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified & directed.

S&F mild steel Joist, channel, angle, or tee sections, fixed independently including drilling holes, without connecting plates, etc. (cut to ordinary lenghts i.e. within 20mm of the length indicated) conforming to Fe 410-0 or 310-0 complete all as specified & directed.

M&L preparation of new steel surfaces of any description not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified & directed.

M&L PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in foundation/filling and mass concrete complete all as specified & directed.

Supplied and fixed pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions complete all as specified & directed.

S & F 25 mm stainless steel curtain rod with fancy type bracket and ring complete all as specified and directed.

Supply & fix 150mm size aluminium alloy handles cast type anodized fixed with ss screw complete complete all as specified & directed.

S&F aluminium anodised tower bolts 150mm long, of extruded section. fixed with ss screw complete all as specified & directed.

S&F heavy weight butt hinges 100mm in size complete all as specified and directed.

S&Faluminium anodised barrel tower bolt with bright bolt 200 mm long complete all as specified & directed.

S&F Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed.

Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified & directed.

M & L 15 mm thick rendering in CM 1:6 on other than fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed.

M&L Rendering 5 mm thick on fair faces of brick work or concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), complete all as specified & directed.

M & L 15 mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces finished even and smooth with out using extra cement complete all as specified & directed.

M & L Preparation of new plastered surface of wall by applying wall care putty and making the surface smooth Finishing walls and applying two coats of acrylic Smooth exterior paint of required shade over one priming coat of exterior primer using roller for painting complete all as specified & directed.

M & L Preparation of new plastered surface of wall by applying wall care putty and making the surface smooth and applying two coat of oil emulsion distemper over one coat of primer using roller for painting complete all as specified & directed.

M& L Preparation of Complete removal of existing treatment by mechanical means old/new plastered surface of wall and applying wall care putty over one coat of primer and making the surface smooth and applying two coats of oil emulsion distemper using roller for painting complete all as specified & directed.

M & L Preparation of new plastered surface of ceiling and making the surface smooth and applying two coat of oil emulsion distemper over one coat of primer using roller for painting complete all as specified & directed.

M&L for preparing new plastered surfaces and applying two coats of white wash on walls complete all as specified and directed.

Taking up or down steel tubing and connection 15 mm bore pipe and removing from site complete all as specified & directed.

Taking up or down steel tubing and connection 20 mm bore pipe and removing from site complete all as specified & directed.

Cutting chases, pinning in, making good to facings where required and pointing in CM (1:3) and cutting chases for concealed water tubing etc, and making good, cutting not exc 10cm girth in brick wall Complete all as specified & directed.

Supplying and laying of CPVC 20mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors complete all as specified & directed.

S&F tubes 20 mm bore, ‘medium grade’, galvanized with all fittings and fixed complete to walls and ceilings or laid in floors, complete all as specified & directed.

S&F in repair cromium plated 15 mm bore size Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified & directed.

S&F as in repair 15mm bore pillar tap, long shank, swan neck, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts complete all as specified & directed.

S&F in repair 15 mm dia stop cock/angle cock cast copper alloy chromium plated screwed down high pressure with fancy type screwed both ends for iron or for union complete all as specified & directed.

M&L as in repair 15 mm consealed stop valve, chromium plated, cast copper alloy, high pressure with handle, screwed end for iron pipe or for union and fixed, complete all as specified & directed.

S&F in repair of vitreous china squatting pan ‘Orrisa pattern’ size 580 x 440 mm white with integral foot rest including replacement of ‘P’ or ‘S’ trap lime concrete bedding and making good floor complete all as specified and directed.

S&F in repair Vitreous China wash basin including pedestal, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified & directed.

S&F in reipair CP towel rail brass 20mm dia 600mm long with bracket CP finish complete all as specified and directed.

Supply & fix in repair vitrous china wash down water closet pan ( padestal pattern) , white ( excluding fixing bolts, flushing cistern ). Including S & F Flush pipe of polyethylene or low or high density of PVC, 32 mm dia, for low level cistern and S & F white plastic seat cover for WC ( E.T ) white including MS CP or aluminium hinging device complete all as specified and directed.

S & F in repair for CP Health Faucet brass body with wall hook and one meter SS braided rubber hose pipe Cat Part No.CERA F8030301. Complete all as specified & directed.

S&F fancy type glass corner fancy type of size 250mm x 250mm of 6 to 7mm thick toughned glass with CP railing fixed with fancy type screws complete all as specified and directed.

S&F (in repair)chromium plated towel rail 20mm dia D type 600 mm long as a approved quality complete all as specified and directed.

Supply and fixing PVC Heavy Duty waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed.

S&F in repair 10 litre capacity PVC valveless, Syphonic action type, fluhing cistern low level,white with inlet ball valve, float and handle including brackets and PVC flush pipe etc complete all as specified and directed.

S&F in repair ,PVC(SWR) floor trap, 75mm bore, plain with grating including jointing with solvent cement complete all as specified & directed.

S&F in repair ,PVC(SWR) gully trap, 125/110mm bore, plain with grating including jointing with solvent cement complete all as specified & directed.

Supply & fix PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

S & F in repairs brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union including shower arm etc complete all as specified & directed.

S&F in repair CP brass soap dish complete all as specified & directed.

Demolition & breaking of PVC/salt glazed rain water or sewage pipe 75/100mm dia set in cement mortar & removing from site including demolition of concrete and making good the surface while reinstalling the pvc 75/110 mm pipes completed all as specified & directed.

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls/laid in floors as in rain water pipes or sewage pipe including stack clamp 30x4mm FI complete all as specified & directed

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wallslaid in floors as in rain water pipes or sewage pipe including stack clamp 30x4mm FI complete all as specified & directed

Supply and fix PVC bends 75mm bore, any radius complete all as specified & directed.

Supply and fix PVC bends 110 mm bore, any radius complete all as specified & directed.

S&F 110mm PVC (SWR) vent cowl complete all as specified & directed.

S&F 110 PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 110mm PVC (SWR) 'S' trap complete all as specified & directed.

Material & labour for sunken slab treatment comprising of the following :-(a) Taking out/ down old existing sunken slab treatment and cleaning the old RCC surfaces of sunken slab including removal of the rubbish from the site of work to a distance n.exc. 250mm compete all as specified and directed.(b) Material & labour for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) over cleaned sunken slab surfaces.(c) Material & labour for applying bituminous priming coat/tack coat over PCC surfaces @ 0.30 Kg per square metre of surfaces. (d) Material & labour for applying bitumin grade 85/25 over priming coat @ 1.20 Kg per Square metre. (e) Material & labour for 25mm thick plastering in CM 1:4 using water proofing compound (WPC) @ 3% by weight of cement (WPC shall be measured and paid for separately under respective item of schedules 'A' here-in-after). (f) Material & labour for suitable thickness of PCC 1:5:10 type E-2 (using 40mm graded broken brick aggregate) for filling in the sunken portion of slab up to its floor level.(g) Supply & fix of 32mm dia GI pipe medium grade, 450m long 9(for draining out the water) complete all as specified & directed.

Supply only water proofing compound complete all as specified & directed.

Taking down carefully any type of battens or conduit point wiring with or except conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site complete all as specified & directed.

Material & labour for point wiring with FRLS PVC insulated 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, unsheathed copper conductor cable in and including PVC concealed conduit of size 20mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes including all cutting / chases etc in walls, with 3mm thick plastic laminated sheet cover including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for One Tube light/bulb/street light point controlled by one, one way switch 05 / 06 Amps.

All as per item No 81.00 here-in-before but One ceiling fan point controlled by one, one way switch 05 / 06 Amps.

All as per item No 81.00 here-in-before but One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch.

All as per item No 81.00 here-in-before but with 2.5 Sqmm nominal cross sectional area, copper conductor cable FRLS for one 3 pin, 05/06 Amp socket outlet point on independet board controlled by one, one way 05/06 Amp switch.

Supply & fixing switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed.

Supply & fixing socket outlet 3 pin, 05 / 06 Amps flush type 240 volts complete all as specified & directed.

Supply and fixing of decorative LED Tube light fitting 1x20 Watt , environmental friendly, energy efficient MS batten with retrofit T8 polycarbonate LED tube-01 No, with batten and all accessories complete all as specified & directed.

Supply and fix lamp holder , PVC / polycarbonate type back plate suitable for batten fitting complete all as specified & directed. .

Supply & fixing of ceiling rose, 3 terminal PVC polycarbonate isolated body complete all as specified & directed .

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8way, with 200 Amps rated complete all as specified & directed.

Supply & fixing MCB SPN, AC, 240 volts of 32 Amps, C curve, 10 KA, complete all as specified & directed.

Supply and fixing MCB SP, AC, 240 volts of 06 to 40 Amps, C curve, 10 KA, complete all as specified & directed.

Material and labour for sub main wiring with 2x6 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all MS conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. Note:- One meter of conduit along with 2x6 sq mm wire and one 6.0 sq mm earth shall be measured as one unit length.

Supply, laying and commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 16 Sqmm 2.0 core armoured, PVC sheathed with aluminium conductor heavy duty complete all as specified & directed.

Supply / laying and fixing 40mm bore galvanised steel tubes with all fittings, light grade, laid in trenches for cable protection complete all as specified & directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 M depth in soft / loose soil and gating out in soft / loose soil complete all as specified and directed.

M&L for washed river dry sand cushioning in trenches 80mm thick before laying the cable and 150mm thick after laying the cable including spreading levelling and hard punning complete all as specified & directed.

Material and labour for contineous brick edging with width equal to the depth of the brick of whole sub class 'B' bricks laid on edge complete all as specified & directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc. 25cm thick in soft / loose soil complete all as specified & directed.

Removing surplus excavated materials n.exc. 50 Mtr and depositing where directed at a level n. exc. 1.5 Mtr above the starting point complete all as specified & directed.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.5 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified & directed.

Supply and fixing LED building security light fitting 1x35 Watt luminaries with die cast aluminium housing comprising epoxy poweder coated enclosed with glass cover in frame with high power LED white lamp of capacity 35 watt including making connections complete with bracket fitting made out of GI pipe medium grade including clampsand nuts and bolts complete all as specified & directed.

Supply and fix water cooler,electric driven ( single phase ) having storage capacity of 80 ltr and normal cooling capacity of 40 ltr per hour complete all as specified & directed.

Supply and fix Voltage stabilizer for automatic operation,single phase naturally air cooled indoor type & designed for input variation between 170v to 250v with out put voltage stabilized at 230v with accuracy of 2.5%, with intelligent time delay system of capacity 2KVA including 5 Amps Top plug complete all as specified & directed.

Supply and fix water heater storage type steel body with steel inner tank and heating element upto 2 KW capacity 25 liter BEE 5 star rated complete with all acceessories such as safety valve thermostate, NRV connection pipe etc complete all as specified & directed.

Supply & Fixing industrial type SPN enclosure with a two pin and earth plug and socket complete with and including 32 Amps MCB, single pole, AC, 240 volts complete all as specified & directed.

Material and labour in repair for sub main wiring with 2x4 Sqmm nominal cross sectional area (two single core cable of 4 Sqmm for Phase and neutral + 01 single core cable of 4.0 Sqmm for earth wire), 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 4.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing in existing rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories. Complete all as specified & directed.

Supply and fixing stop cock 15mm dia cast cooper alloy plated, screwed both end high pressure with handle complete all as specified and directed.

Supply and fixing 15mm dia unplasticised CPVC pipe of pressure rating 10 kgf/ Sqcm fixed complete to wall, ceilling or in floor etc. Complete all as specified & directed.

Supply and fixing bib taps cast cooper alloy with crutch handle screwed down, screwed for iron pipe and fixed. Complete all as specified & directed.

Material and labour for cutting of existing GI pine 15mm dia and fixing GI short piece, elbow, sockets complete all as specified and directed.

Supply & fix Camera CP plus 2.4 MP 8 Pcs Bullet, 2TB Hardisk, 8CH DVR, Cable Roll, Power supply, BNC & DC connecter Kit complete all as specified and directed.

Supply & fix LG 108 cm (43 inches) 4K ultra HD samrt LED TV complete all as specified and directed. Make- Sony/LG/Samsung.

Supply & fixing Timewatch Bio-31 Attendance Machine complete all as specified and directed. Make- ESSL/LEDATEC BC188i/Flexxo

Supply and fixing exhaust fan, steel body AC single phase, 230Vol, of size 450mm sweep, heavy duty with blades and frame and lauvers complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE Five star rated with brushless direct current motor ( BLDC) complete all as specified and directed.

Supply and fix wall fan 400 mm sweep copper wounded with pull cord to control speed and oscillation,three blades,230 volts,50 Hz ,speed not less than 2000 RPM, air delivery not less than 90 CUM not more than 110 watt including all accesories for fixing it on wall complete all as specified & directed.

Supply and fix desert cooler height made of GI of 22 gauge sheet with heavy duty single phase motor, copper wire wounded 400 mm sweep, tank capacity 75 Litre speed-1375 RPM or more, cooler power consumption not more than 160 watt , sheet thickness for filter panel, grill, top cooler body should not less than 0.8mm including sump tank having thickness (nominal) should not less than 1.00mm and size of tank 0.65m x 0.65m x 0.20m (high) with wood wool cooling pad including provision of brass float valve 15 mm dia and connecting with and including PTMT PVC connection complete all as specified and directed. Make:- Summer King/Khaitan/Symphony

Jain Traders

SA construction co.

Rajneesh Jain

M/S AGARWAL CONSTRUCTION CO.

ATHARV CONSTRUCTION

CHAUDHARY FURNITURE HOUSE