Construction of vertical extension of Directorate of Health Services building Phase-II at MINECO, Aizawl

Amount

2.08 : Earthwork in excavation in foundation trenches etc. not exceeding 2 meters depth including dressing of bottom and sides of trenches and subsequent filling and compaction in 15cm layers as in column foundations, fence posts, etc. and disposal of all surplus soil as directed within a lead of 30 metres. (b) Hard Soil ( pick work ).

2.17 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

4.03 : Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering - All work upto plinth level: (a) 1:3:6(1 cement :3 course sand :6 stone aggregate 20mm nominal size)

5.28 : Providing and laying in position machine batched, machine mixed and machine vibrated design mix M-20 grade reinforced cement concrete excluding cost of centering and shuttering and reinforcement in - (a) All works upto plinth level.

5.28 : (b) All work above plinth level upto V level.

19.2 : Extra for providing and mixing water proofing chemical (plastocrete or equivalent chemical) in plain and reinforced cement concrete work 1 : 1.5 : 3 , @ 2% by weight of cement.

5.18 : Steel reinforcement for RCC work including straighthening, cutting, bending, placing in position and binding all complete. (b) Thermo-Mechanically Treated bars of grade Fe-500 or more.

5.1 : Centering and shuttering including strutting, propping, etc. and removal of form works in - (c) Columns

5.1 : (d) Beams

5.1 : (e) Slab, landing, etc.

5.11 : Smooth finishing of exposed surface in R.C.C. work with cement plaster 6mm thick in cement mortar 1:3 (1cement : 3fine sand).

6.06 : Half brick masonry with first class brick in superstructure above plinth level outo floor V level. (a) in cement mortar 1:3 (1 cement : 3 fine sand)

20.07 : 12mm cement plaster 1 : 3 (1 cement : 3 fine sand).

12.19 : Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1 : 3 (1 cement : 3 coarse sand) and jointing with cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Used 200x300mm size)

12.12 : Providing & laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on bed 20mm thick cement mortar 1 : 4 (1 cement : 4 course sand), including the joints with white cement and matching pigments etc. complete as per design colours. (Used 600x600mm size) (d) Digital (Marble look)

/9.06 : Providing Ist class local wood dressed in frames of chaukat for doors, windows, clerestory windows fixed in position.

9.11 : Providing and fixing 1st class local wood panelled shutters for doors etc. including M.S. butt hinges with necessary screws, etc. complete. (b) 35 mm thick.

9.32 : Providing and fixing readymade door (Masonite or equivalent quality) including M.S. butt hinges with necessary screws complete. (b) 35mm Readymade Teak Veneer Door

11.03 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS: 733 and IS : 1285, anodised transparent or dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15), fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and paneling to be paid for separately ). For fixed portion. (c) Powder coated

11.04 : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required. (Glazing to be paid for separately) (a) Natural colour

11.05 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (c) With glass panes of 5.50 mm thickness.

9.48 : Providing and fixing wooden pelmet with 25mm dia wooden curtain rod and bracket including fixing wooden plugs etc. complete ( to be fixed on masonry or concrete work ) (B) 1st class local wood (i) 12mm thick 100 cm wide pelmet.

11.01 : Providing and fixing anodised aluminium work for doors, windows, ventilators and partitions with extruded built up standard sections/ other sections of approved make conforming to IS : 733 and IS : 1285 fixing with dash fasteners of required dia and size, including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/ neoprene gaskets etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing /panelling, CP brass /stainless steel screws all complete including fixing of glasses but excluding cost of glasses. (c) Powder coated (ii) 3 - track sliding windows/ventilators.

11.02 : Supplying of glass panes at site. (a) 4mm thick plate sheet glass.

14.26 : Providing and fixing brass parliamentary hinges bright finished with necessary screws, etc. complete. (a) 150 x 125 x 27 x 5mm

14.28 : Providing and fixing brass sliding door bolts (aldrops) bright finished with nuts and screws etc. complete. (a) 300 x 16 mm

14.29 : Providing and fixing Brass Tower Bolts (Socket Bolts) bright finished with necessary screws etc. complete. (a) 300 mm

14.32 : Providing and fixing brass handles with necessary screws, etc. complete (a) 150 mm

14.33 : Providing and fixing bright finished brass two lever mortise door lock with necessary screws, etc. complete. (b) Knob type

20.49 : Applying priming coat with ready mixed primer of approved brand and manufacture on plaster surface. (a) Ready mix white primer.

20.73 : Wall painting with interior emulsion paint of approved brand and manufacture on new work (two or more coats) to give an even shade. (a) Regular interior emulsion like Rangoli delux emulsion etc.

20.51 : Applying priming coat with ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) & Plywood.

20.72 : Painting with synthetic enamel paint of approved brand and manufacture in all shade on new work (two or more coats). (a) General quality

8.02 : Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. (d) Granite (galaxy black)

12.13 : Providing & laying vitrified tiles in different sizes (thickness to be specified by the manufacture) with water absorption less than 0.08% and conforming to IS:15622,of approved make, in all colours and shades, in skirting/dado, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water) based) conforming to IS:15477, in average 6mm thickness, including grouting of joints (Payment for grouting of joints to be made separately) (b) Nano tech (Single charge)

17.33 : Providing and fixing on wall face SWRPVC soil, waste and vent pipes including jointing with rubber lubricant/cement solvent complete. (a) 110mm dia.

17.34 : Providing and fixing SWRPVC plain bend of required degree ( 87.50 ) including jointing with rubber lubricant/cement solvent complete. (a) 110 mm dia.

17.34 : (b) 75 mm dia.

17.35 : Providing and fixing SWRPVC plain bend of required degree (45) including jointing with rubber lubricant/cement solvent complete. (a) 110 mm dia.

17.37 : Providing and fixing single equal SWRPVC plain junction of required degree ( T-junction ). (a) 110x110x110mm.

17.41 : Providing and fixing SWRPVC socket including jointing with rubber lubricant/cement solvent. (a) 110mm dia socket.

17.41 : (b) 75mm dia socket.

17.02 : Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm uPVC P or S trap, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: (Without Cistern) (a) Orissa pattern pan with integral type foot rests (i) White

17.44 : Providing and fixing 125/110 S-trap SWRPVC including jointing with rubber lubricant/ solvent cement.

17.16 : Providing and fixing White vitreous china wash basin Standard of Parryware/ Hindware/ Cera and equivalent make with R.S. or C.I. brackets, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plugs, 32mm C.P. brass waste of standard pattern, 32mm C.P. brass traps and union complete including painting of fittings and brackets, cutting and making good the walls wherever required. (c) Vitreous China corner Wash basin 450 x 390 mm with single 15 mm C.P. brass pillar taps (i) White

17.17 : Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. (i) White

18.01 : Providing and fixing on terrace (at all floor levels) Polyethylene storage tank of approved brand and manufacture with cover and mosquito proof coupling and suitable locking arrangement and making nescessary connections for inlet, outlet and overflow pipe but without the cost for base support. (i) Sintex or equivalent

18.29 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall (b) 20mm dia nominal bore.

18.36 : Making connection of Astral CPVC pipes distribution branch by providing and fixing elbow 90° with jointing, testing complete including cutting and making good etc. (b) 20mm dia

18.38 : Making connection of Astral CPVC pipes distribution branch by providing and fixing reducing 'L' elbow 90° with jointing, testing complete including cutting and making good etc. (a) 20x15mm

18.44 : Making connection of Astral CPVC pipes distribution branch by providing and fixing socket/coupling with jointing, testing complete including cutting and making good etc. (a) 15mm dia.

18.44 : (b) 20mm dia.

18.07 : Providing and fixing brass bib cock of approved quality. (b) 20mm nominal bore

18.5 : Providing and fixing CPVC ball valve/ Globe/ Stop & Waste valve/ Boiler drain etc. complete. (b) 20mm nominal bore

17.41 : Providing and fixing SWRPVC socket including jointing with rubber lubricant/cement solvent. (b) 75 mm dia socket.

17.42 : Providing and fixing ventilation cowl including jointing with rubber lubricant/cement solvent complete. (b) 75mm SWRPVC vent cowl

17.43 : Providing and fixing W.C. connection bend type (siphon) (SWRPVC) including jointing with rubber lubricant/ solvent cement.

17.29 : Providing anf fixing anodised alluminium towel rail with two anodised alluminium brackets to wooden cleats with C.P brass screws. (b) 600x20mm size.

17.04 : Providing and fixing vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : (i) White

17.30 : Providing and fixing toilet paper holder. (b) Plastic toilet paper holder of standard size.

E:01:00 - LIGHTING AND POWER WIRINGS C/03:01 - Wiring in looping system with PVC wire 1.5 sqmm standard copper wire/conductor as per IS:694(1990) , FIA&TAC approved, ISO-9002 certified company make the insulation PVC of voltage strength 650/110 volts grade stranded copper cable running inside PVC casing &capping 25mm dia (heavy duty) fixed in surface in the wall/ceiling/floor as per convenience including all necessary accessories from control switch to the point as required (with PVC box/sunmica board with cover) as shown:- 1. TO A LIGHT POINTS (B) Short Point(Modular)

(C) Medium point (Modular)

2. TO CEILING FAN POINTS (C) Medium point (Modular)

3. TO EXHAUST FAN POINTS (C) Medium point (Modular)

C:03:02 - LIGHT SOCKET/PLUG POINT 5/6 AMPS Wiring in looping system with 2.5sqmm PVC insulated standard copper conductor as per item no 1/C:02:01 to give power supply to light socket/plug point 5/6 A with required accessories in complete as follows:- (C) Medium point (Modular)

C:03:03 - POWER SOCKET/ PLUG POINT 15/16A Wiring in looping system with PVC wire sheathed standard copper conductor/wires as per IS:694 1990) and Flame retardant (FR) 1100 voltage graded copper flexible wire stranded copper running inside PVC casing & capping (Gr-II) 30x12mm fixed, surface on the wall/ceiling /floor as per convenience including junction box having required numbers of ways from DB to the power plug/socket 15/16A point etc. as required :- (C) Medium point (Modular)

4/C:01:00 : PVC INSULATED COPPER CONDUCTOR WIRING IN EXISTING CONDUIT GR-I 480 : PVC insulated Multi-core cable 1100V conforms to IS-694 for indoor application three cores 1.mm² Havells/Equivalent

481 : PVC insulated Multi-core cable 1100V conforms to IS-694 for indoor application three cores 1.5mm² Havells/Equivalent

482 : PVC insulated Multi-core cable 1100V conforms to IS-694 for indoor application three cores 2.5mm² Havells/Equivalent

483 : PVC insulated Multi-core cable 1100V conforms to IS-694 for indoor application three cores 4.0mm² Havells/Equivalent

5/C:03:07 : MAIN TO SUB-MAIN WIRING (three phase four wires) Wiring in parallel sustem with PVC wire sheathed standard copper conductor/ wires as per IS:694(1990) and life shield-Zero Halogen low smoke (ZHLS) 1100V graded copper flexible wire stranded copper running inside PVC casing & capping (Grade-I) 25/30/38mm X 15mm dia' fixed, surface on the wall/ceiling/floor as per convinience including junction box having required nunmbers of ways from Main to Sub-Main/DB/Sub-Main/DB to DB/Switchboards/SDB/to switch board as required : (A) 4X 2.5 Sqmm copper conductor/cable + 2x 2.5 Sqmm earth wire

4X 10 Sqmm copper conductor/cable + 2 X 10 Sqmm earth wire

E:02:00 - LIGHTING FIXTURES AND FANS 1838 : CFL Curvy 15W (SP) B22, Havells/Equivalent

1022 : Angle Holder ISI Anchor/Equivalent

1398 : FTL Deco 1X36W DREAMLITE ELECTRONIC/ mirolta slim compact energy efficient luminaire with coloured end caps and electronic ballast suitable Havells/Phililips/Equivalent

1845 : Ceiling fan 1200mm sweep ISI marked 3 blades(Usha/Cromton/Equivalent)

1871 : Exhaust fan 300mm sweeps ISI marked (Usha /Havells/Equivalent

SUPPLYING AND FIXING OF PVC CASING & CAPPING GR-I 303 : PVC casing & capping pipe (Heavy duty) 30mmX10mm

304 : External

305 : Internal

306 : 'Tee' joint

307 : Coupler

308 : Elbow

309 : Cross Joint

E:03:00 - MAIN DISTRIBUTION, SWITCH BOARDS ETC. O:03:00 - MCB DISTRIBUTION BOARD (DB)Supplying and fixing of different ways MCB Distribution board (DB) Consumer unit, single phase/three phase with sheet metal ,Acrylic cover Phospha-tised powder painted and detachable cover with 63A 2/4-Poles Isolator, Bus Bar, Neutral link, earth bar and din rail conforms to IS:13032,IS:8623, BS:5486 240/ 415 volts,50 Hz, AC supply on recess/ surface including inter-connection, painting etc, in completed. (01) 6-ways MCB DB SP&N SD Metallic Door

(02) 8-ways MCB DB SP&N SD Metallic Door

N:01:00 - MANIATURE CIRCUIT BREAKER Supplying and fixing of all types and rating MCBs, RCCBs, ELCBs etc, 240/415 Volts 50 Hz AC supply in the existing MCB DB complete with connections, testing & commissioning etc in completed:- (01) MCB SP B series 5-32 Amps

(04) MCB DP B series 5-32 Amps

(12) 50/63Amps FP MCB B-Series

1036 : Copper bus bar chamber 4-ways, wall mounted industrial switch gear Bus Bar chamber 100 Amps (Havells/HPL/Indo Asian)

Supplying and fixing of switch boards (MODULAR TYPE) Supplying and fixing of Modular switch board grade -I of the following sizes/modules on surface/recess including PVC/Steel boxes, modular plate and necessary switches, plug/socket,and fan regulators etc.with painting if necessary A.ONE MODULES 1) 1S

B. THREE MODULES 13) 1S + 1Soc

C. FOUR MODULES 51) 2S + 1 Soc

D. SIX MODULES 83) 3S + 1Soc + 1Bkp

Service connection for essential & non- essential load of 67.296 & 49.610 kw respectively(LS)

Zamzo Engineering Construction & Consultancy

Lalhruaitluanga