Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.1 LAccepted-AOC HAKIMPARA NEAR PAKURTALA MORE SILIGURI 734 001 | DARJEELING | WEST BENGAL | 734001 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹44.5 L+₹1.7 L (3.93%)Rejected-Finance 45 9 6 BAGHAJATIN COLONY PO PRADHAN NAGAR SILIGURI 734 403 DIST DARJEELING WB | 734403 | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹45.0 L+₹2.1 L (5.00%)Rejected-Finance C O BIKASH CHAKRABORTY OPPOSITE GITAM NURSERY SCHOOL NEAR BAGHAJATIN PARK PO SILIGURI DISTT DARJEELING WEST BENGAL 734401 | DARJEELING | WEST BENGAL | 734401 | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹45.2 L+₹2.4 L (5.56%)Rejected-Finance MAHANANDA PARA GOVT SAW MILL ROAD P O SILIGURI DIST JALPAIGURI WB | DARJEELING | WEST BENGAL | 734001 | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | L5₹45.9 L+₹3.1 L (7.14%)Rejected-Finance ATUL PRASAD SARANI DUDH MORE SILIGURI 06 DARJEELING WB | DARJEELING | WEST BENGAL | 734001 | L5 | Rejected-Finance Other than lowest bidder |
Tender Value
₹43.5 L
EMD Value
₹87,000
Closing Date
9 Oct 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Bengdubi
Headquarters Commander Works Engineer Bengdubi Post-Bengdubi Distt-Darjeeling (WB) PIN- 734424
REPAIRS TO FOOTPATH HARDSTANDING DRAIN AND CULVERT AT VARIOUS LOCATIONS OF SOMNATH ENCLAVE VIKRAM BATRA VIHAR and TARAPORE VIHAR AT SUKNA MIL STN UNDER GE SUKNA
2024_MES_670602_1
8228/S/E8
Open Tender
Civil Works
Item Rate
180 days
Sukna
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE Sukna
₹87,000
HQ CWE Bengdubi
29 Nov 2024
3 Sept 2024
14 Oct 2024
3 Sept 2024
9 Oct 2024
3 Oct 2024
9 Sept 2024
Amount
Demolition of cement concrete (un reinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level), including removal of debris ouside the premises, Complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), including disposing off the retrieved debris outside the premises, complete all as specified and as directed.
Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site outside the premises, complete all as specified and as directed.
M&L for Brickwork with Sub class 'B' old size bricks of class designation 75 (i.e average compressive strength 75 Kg / cm2), straight or curved on plan exc 6m mean radius, built in CM 1:6, including demolition of brick work or rubbled stone masonry and disposing off the retrieved debris outside the premises, complete all as specified and directed.
M&L for rendering 15 mm thick in CM (1:4) on fair faces brick work or concrete surfaces finsihed even and smooth (without using extra cement) mixed with water proofing compound in top layer of 5mm thick as per manufacturer instructions , complete all as specified and as directed. Note:- WPC shall be measured and paid seperately
M&L for preparing new plastered surfaces of walls and applying two coats cement base paint over a coat of primer, complete all as specified and as directed.
Supply only liquid water proofing compound, complete all as specified and directed..
M&L for r providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.
M&L for 75mm thick PCC(1:3:6), type C-1, (using 40mm graded crushed stone aggregate) as in hard standing etc, finished even and smooth without using extra cement, mixed with recron fibre as per manufacturer instructions complete all as specified and directed.
M&L for providing 75mm thick PCC (1:3:6), type C1 (using 20mm graded stone aggregate) as in plinth protection, surface finished even & smooth without using extra cement, mixed with recron fibre as per manufacturer instructions and including provision of 10 mm joints (at an interval of 3 metre and turnings) duly filled with fine sand and bitumen in the ratio of (3:1), complete all as specified and directed.
M&L for 75mm thick PCC (1:4:8), type D2, (using 40mm graded crushed stone aggregate) as in sub-base of of floors etc; finished fair & even/rough mixed with recron fibre as per manufacturer instructions, complete all as specified and directed.
M&L for providing and laying at or near ground level factory made kerb stone of size 450mmx300mmx100mm or 300mmx300mmx100mm and M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar (1:3) (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required and including demolition, complete all as specified and as directed.
M&L for plain cement concrete (1:2:4) type B1, (using 20 mm graded crushed stone aggregates), mixed with recron fibre as per manufacturer instructions as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses,copings, bed plates and the like including weathering,slightly rounded or chamfered angles and throating, including necessary formwork, complete all as specified and as directed.
M&L for PCC (1:4:8) type D-2, (using 40mm graded crushed stone aggregate) mixed with recron fibre as per manufacturer instructions, as in foundation, filling & mass concrete, complete all as specified and directed.
M&L for providing Plain Cement Concrete (1:3:6) type C2, (using 40mm graded crushed stone aggregate) mixed with recron fibre as per manufacturer instructions ,as in surfaces channel and drains including necessary form work, complete all as specified and as directed.
Extra for forming fair finished drain or channel 30 cm inner girth using extra cement including forms moulds mitred/stopped ends etc, complete all as specified and as directed.
M&L for factory fabricated Hydraulically machine pressed prepolished cement concrete chequered tiles of size 300x300X25mm thick (with grey cement and pigment), set in neat cement slurry including provision of 15mm thick cement screed bedding layer in cement mortar (1:4), tiles joints shall be grouted and immediately after grouting, the joints shall be pointed flush in separate process in cement mortar (1:3) mixed with pigments to match the colour of the Tiles, complete all as specified and directed.
M&L for coloured digital Ceramic heavy duty parking tiles 8 to10 mm thick (square / rectangular) of approved size, area of each tile exceeding 0.08 sqm but not exceeding 0.16 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match with the shade of tiles, over and including 15mm thick screed bed in cement mortar (1:4), complete all as specified and as directed.
M&L for precast Reinforced cement concrete (1:2:4) type B-1 (using 20 mm graded crushed stone aggrgates ) set in cement mortar (1:4) as in landing, cover slab (for manholes, chulla hoods, chajjas, water trough, mangers, shelves and similar article with plain faces including form work and demolition of existing reinforced cement concrete complete all as specified and as directed .
M&L for Reinforced cement concrete (1:2:4) type B-1 (using 20 mm graded crushed stone aggrgates ) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including demolition of existing reinforced cement concrete complete all as specified and as directed .
M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc, complete all as specified and as directed.
Use and waste of formwork to soffits of suspected slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (horizonal or slopping) for rough finished flat surfaces of concrete, complete all as specified and as directed.
M&L for forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’, thickness of concrete slab 75 mm, complete all as specified and as directed.
Supply only polyester tringular fibres as secondary reinforcement in all type of concrete and mortar, complete all as specified and directed. Make: RELIANCE or equvilant brand of other manufracturer.
Excavation in trenches in soft/ loose soil not exceeding 1.5 metre wide and not exceeding 1.5m in depth and not exceeding 10 Sqm on plan & 1.5 metre in depth for pole etc, complete all as specified and as directed by the Engineer-in-Charge.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick with soil etc complete all as specified and directed
Removing excavated material to a distance not exc 50.00 mtr and depositng where directed at a level n.exc 1.5m above the stating point, complete all as specified and as directed.
M&L in reapair 450 mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars, complete all as specified and directed.
M&L for cement concrete (1:4:8) type D-2, using 40mm graded crushed stone aggregates for 450 mm bore pipes as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested, complete all as specified and as directed
Jagatbandhu Enterprises (BID ID -3133681)
M/S B D ENTERPRISE (BID ID -3131846)
S GUHA (BID ID -3133311)
MS ESSCON (BID ID -3132352)
METTLE WORKS (BID ID -3132567)
M/S RANEN PAL (BID ID -3131887)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .