Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.2 LAccepted-Finance | ₹1.2 L | L1 | Accepted-Finance lowest |
| 2 | L2₹1.3 L+₹3,051 (2.45%)Rejected-Finance | ₹1.3 L+₹3,051 (2.45%) | L2 | Rejected-Finance not lowest |
| 3 | L3₹1.3 L+₹4,401 (3.54%)Rejected-Finance GOLE GUJRAL JAMMU JAMMU | ₹1.3 L+₹4,401 (3.54%) | L3 | Rejected-Finance not lowest |
| Sl No | Description | Qty | Unit | SMART TECH AND CO L2 | ROYAL ENGINEERING ENTERPRISES L1 | M/S GOPAL ELECTRICAL L3 |
|---|---|---|---|---|---|---|
| 1.00Annual periodical maintenance of Kapoorpur gates Tanda head gates, Rathian gates, Chakroi gates installed on various distributaries of Main Ranbir Canal in RS Pura, Suchetgarh. | ||||||
| 1.01 | 1) Rathian Head minor gate at RD 4170 of D 10 of MRC (2 ft"x2'8"):- Annual periodical maintenance of rathian head minor gate by way of dismantling of gate lifting mechanism from the supporting channel and disconnecting the stem rod from the leaf structure then extracting out the damaged gate leaf structure with the help of manual labour using tools and tackles, tripod stand after removing accumulated mud/silt around the gate leaf.
Checking for any worn out portions and welding with frame with double layered welding after properly pressing exposed portions. Cleaning of grooves for lowering of gate.
Servicing of the 2 ton capacity winch machine by removing the old grease and washing / cleaning with kerosene oil or any other solvent to make it dust free. Extracting the bearings and gear mechanism from winch machine. Greasing & oiling using ISI mark standard quality grease for smooth, easy up and down moment of gate. Replacement of nuts and bolts for connecting winch machine with channels installed over the canal.
Replacement of nut and bolt connecting stem rod to leaf of gate. Reinstallation of the gate and winch machine at site and checking the up and down moment. Removal of old paint by sand paper and painting of winch machine and gate with one coat of good quality metal primer and coat of paint ( Nerolec / Asian paint/ Berger Paint). Painting must be done on both sides of gate. The job includes cost of material, skilled manual labour, welding charges,DG set hire charges, hire charges of tools and tackles required for the job.
2) Rathian Head gatesI, II, III and IV at RD 4170 of D 10 of MRC (5'6"x2'9"):- Annual periodical maintenance of Rathian head gates by way of dismantling of gates lifting mechanism from the supporting channel and disconnecting the stem rod from the leaf structure then extracting out the damaged gate leaf structure with the help of manual labour using tools and tackles, chain pulley block /crane after removing accumulated mud/silt around the gate leaf.
Checking for any worn out portions and welding with frame with double layered welding after properly pressing exposed portions.
Servicing of the 2 ton capacity winch machine by removing the old grease and washing / cleaning with kerosene oil or any other solvent to make it dust free. Extracting the bearings and gear mechanism from winch machine in case of gear operated winch machine and extraction of stem rods and bush in case of top spindle moving winch machine. Greasing & oiling using ISI mark standard quality grease for smooth, easy up and down moment of gate.
Replacement of nuts and bolts for connecting winch machine with channels installed over the canal.
Replacement of nut and bolt connecting stem rod to leaf of gate. Reinstallation of the gates and winch machines at site and checking the up and down moment. Removal of old paint by sand paper and painting of winch machine and gate with one coat of good quality metal primer and coat of paint ( Nerolec / Asian paint/ Berger Paint). The job includes cost of material, skilled manual labour, welding charges,DG set hire charges, hire charges of tools and tackles required for the job.
3) Kapoorpur head gate on D10 canal of MRC at RD 17468 of D10 ( 12 ft x 4 ft) :- Annual periodical maintenance of kapoorpur head gate by way of dismantling gate lifting mechanism from the supporting channel and disconnecting the stem rod from the leaf structure then extracting out the damaged gate leaf structure with the help of manual labour using tools and tackles, chain pulley block /crane after removing accumulated mud/silt around the gate leaf.
Checking for any worn out portions and welding with frame with double layered welding after properly pressing exposed portions. Servicing of the 5 ton capacity winch machine by removing the old grease and washing / cleaning with kerosene oil or any other solvent to make it dust free. Extracting the bearings and gear mechanism from winch machine. Greasing & oiling the bearing mechanism using ISI mark standard quality grease for smooth, easy up and down moment of gate. Replacement of nuts and bolts for connecting winch machine with channels installed over the canal.
Replacement of nut and bolt connecting stem rod to leaf of gate. Reinstallation of the gate and winch machine at site and checking the up and down moment. Removal of old paint by sand paper and painting of winch machine and gate with one coat of good quality metal primer and coat of paint as per prescribed colour code of gates ( Nerolec / Asian paint/ Berger Paint). Painting must be done on both sides of gate. The job includes cost of material, skilled manual labour, crane, welding charges,DG set hire charges, hire charges of tools and tackles required for the job.
Fabrication and providing of spanner for moving worm gear in winch machine.
4) Kapoorpur minor gate I and II at RD 17468 of D10 canal of MRC (2.75ft x 2.25 ft):- Annual periodical maintenance of kapoorpur minor and escape gate by way of dismantling gate lifting mechanism from the supporting channel and disconnecting the stem rod from the leaf structure then extracting out the damaged gate leaf structure with the help of manual labour using tools and tackles, chain pulley block / tripod after removing accumulated mud/silt around the gate leaf.
Checking for any worn out portions and welding with frame with double layered welding after properly pressing exposed portions. Servicing of the 2 ton capacity winch machine by removing the old grease and washing / cleaning with kerosene oil or any other solvent to make it dust free. Extracting the bearings and gear mechanism from winch machine. Greasing & oiling using ISI mark standard quality grease for smooth, easy up and down moment of gate. Replacement of nuts and bolts for connecting winch machine with channels installed over the canal.
Replacement of nut and bolt connecting stem rod to leaf of gate. Reinstallation of the gate and winch machine at site and checking the up and down moment. Removal of old paint by sand paper and painting of winch machine and gate with one coat of good quality metal primer and coat of paint ( Nerolec / Asian paint/ Berger Paint). Painting must be done on both sides of gate. The job includes cost of material, skilled manual labour, welding charges,DG set hire charges, hire charges of tools and tackles required for the job. )
5.Kapoorpur Escape Gate Rd 19000 of MRC(4’x3’) :- Annual periodical maintenance of the gate by way of dismantling of gate lifting mechanism from the supporting channel and disconnecting the stem rod from the leaf structure then extracting out the damaged gate leaf structure with the help of manual labour using tools and tackles, chain pulley block /crane after removing accumulated mud/silt around the gate leaf.
Servicing of the 03 capacity winch machines by removing the old grease and washing / cleaning with kerosene oil or any other solvent to make it dust free. Extracting the bearings and gear mechanism from winch machine. Greasing & oiling using ISI mark standard quality grease for smooth, easy up and down moment of gate.
Replacement of nuts and bolts for connecting winch machine with channels installed over the canal.
Replacement of nut and bolt connecting stem rod to leaf of gate. Reinstallation of the gate and winch machine at site and checking the up and down moment. Removal of old paint by sand paper and painting of winch machine and gate with one coat of good quality metal primer and coat of paint ( Nerolec / Asian paint/ Berger Paint). The job includes cost of material, skilled manual labour, hire charges of tools and tackles required for the job.
6) Tanda head gates I and II and eat RD 6950 of D10 Canal of MRC (5’9”x2’9”):- Annual periodical maintenance of Tanda head gates by way of dismantling mechanical components of gate such as worm and worm gear, roller, rack and pinion arrangement. Extracting the gates outside channel grooves imbedded in side concrete walls using crane and manual labour.
Service to rack and pinion arrangement by properly cleaning rack from dust and grease.. Servicing of worm gear by cleaning the teeth from dust and grease.
Checking of leaf of the gate for any mechanical damage and repairs by straightening on heavy duty hydraulic press, welding at worn out portions of the skin plate with quality MS electrodes.
Greasing & oiling of all moving parts using ISI mark standard quality grease for smooth, easy up and down moment of gate. Removal of old paint by sand paper and painting of winch machine and gate with coats of metal oxide primer and enamel paint as per the colour code for gates. Reinstallation of the serviced gates and machines at site and checking the up and down moment. The job includes cost of material, skilled manual labour, crane, welding charges,DG set hire charges,hire charges of tools and tackles required for the job.
7) Chakroi gate I and II on Tanda branch of D10 Canal at RD 8460 (6.5 ft x3.25 ft) Annual periodical maintenance of Chakroi gates I and II by way of dismantling of winch machine from the supporting channel and disconnecting the stem rod from the leaf structure then extracting out the damaged gate leaf structure with the help of manual labour using tools and tackles, chain pulley block /crane after removing accumulated mud/silt around the gate leaf. Carriage of gate structure along with winch machine and stem rod to the road sidewith the help of manual labour using tools and tackles.
Checking for anyworn out/ damaged portions and welding with frame with double layered welding after properly pressing exposed portions. Servicing of the 5 ton capacity winch machines by removing the old grease and washing / cleaning with kerosene oil or any other solvent to make it dust free. Extracting the bearings and gear mechanism from winch machine. Greasing & oiling the bearing mechanism using ISI mark standard quality grease for smooth, easy up and down moment of gate. Reinstallation of the repaired gate and winch machine at site and checking the up and down moment.Removal of old paint by sand paper and painting of winch machine and gate with one coat of good quality metal primer and coat of paint ( Nerolec/ Asian paint/ Berger Paint) as per prescribed color code for gates.The job includes cost of material, skilled manual labour, crane, welding charges,DG set hire charges, hire charges of tools and tackles required for the job.
Note:- The tenderers are requested to visit the site and quote the rate including rebate on old parts as per site conditions. Any modifications/ alterations of the job, absolutely necessary if required at the time of execution may be done as per actual site conditions | 1 | Job | 1,27,350 ₹1,27,350 | 1,24,299 ₹1,24,299 Lowest | 1,28,700 ₹1,28,700 |
| 1.02 | Rebate on Old Parts | 1 | Job | -2,547 ₹-2,547 | -2,650 ₹-2,650 | -2,574 ₹-2,574 |
Tender Value
₹1.3 L
EMD Value
₹2,580
Closing Date
19 Jan 2026, 12:00 pmClosed
XEN MID JAMMU
MID JAMMU
MID/J/140
2026_IFC_300172_1
MID/J/e-NIT/2025-26/140
Open Tender
Repair and Maintenance Works
Item Wise
20 days
rs pura suchetgarh
as per tender notice
8 documents required · 8 mandatory
₹200
Executive Engineer MID JAMMU
₹2,580
27 Jan 2026
8 Jan 2026
19 Jan 2026
8 Jan 2026
19 Jan 2026
9 Jan 2026
1) Rathian Head minor gate at RD 4170 of D 10 of MRC (2 ft"x2'8"):- Annual periodical maintenance of rathian head minor gate by way of dismantling of gate lifting mechanism from the supporting channel and disconnecting the stem rod from the leaf structure then extracting out the damaged gate leaf structure with the help of manual labour using tools and tackles, tripod stand after removing accumulated mud/silt around the gate leaf. Checking for any worn out portions and welding with frame with double layered welding after properly pressing exposed portions. Cleaning of grooves for lowering of gate. Servicing of the 2 ton capacity winch machine by removing the old grease and washing / cleaning with kerosene oil or any other solvent to make it dust free. Extracting the bearings and gear mechanism from winch machine. Greasing & oiling using ISI mark standard quality grease for smooth, easy up and down moment of gate. Replacement of nuts and bolts for connecting winch machine with channels installed over the canal. Replacement of nut and bolt connecting stem rod to leaf of gate. Reinstallation of the gate and winch machine at site and checking the up and down moment. Removal of old paint by sand paper and painting of winch machine and gate with one coat of good quality metal primer and coat of paint ( Nerolec / Asian paint/ Berger Paint). Painting must be done on both sides of gate. The job includes cost of material, skilled manual labour, welding charges,DG set hire charges, hire charges of tools and tackles required for the job. 2) Rathian Head gatesI, II, III and IV at RD 4170 of D 10 of MRC (5'6"x2'9"):- Annual periodical maintenance of Rathian head gates by way of dismantling of gates lifting mechanism from the supporting channel and disconnecting the stem rod from the leaf structure then extracting out the damaged gate leaf structure with the help of manual labour using tools and tackles, chain pulley block /crane after removing accumulated mud/silt around the gate leaf. Checking for any worn out portions and welding with frame with double layered welding after properly pressing exposed portions. Servicing of the 2 ton capacity winch machine by removing the old grease and washing / cleaning with kerosene oil or any other solvent to make it dust free. Extracting the bearings and gear mechanism from winch machine in case of gear operated winch machine and extraction of stem rods and bush in case of top spindle moving winch machine. Greasing & oiling using ISI mark standard quality grease for smooth, easy up and down moment of gate. Replacement of nuts and bolts for connecting winch machine with channels installed over the canal. Replacement of nut and bolt connecting stem rod to leaf of gate. Reinstallation of the gates and winch machines at site and checking the up and down moment. Removal of old paint by sand paper and painting of winch machine and gate with one coat of good quality metal primer and coat of paint ( Nerolec / Asian paint/ Berger Paint). The job includes cost of material, skilled manual labour, welding charges,DG set hire charges, hire charges of tools and tackles required for the job. 3) Kapoorpur head gate on D10 canal of MRC at RD 17468 of D10 ( 12 ft x 4 ft) :- Annual periodical maintenance of kapoorpur head gate by way of dismantling gate lifting mechanism from the supporting channel and disconnecting the stem rod from the leaf structure then extracting out the damaged gate leaf structure with the help of manual labour using tools and tackles, chain pulley block /crane after removing accumulated mud/silt around the gate leaf. Checking for any worn out portions and welding with frame with double layered welding after properly pressing exposed portions. Servicing of the 5 ton capacity winch machine by removing the old grease and washing / cleaning with kerosene oil or any other solvent to make it dust free. Extracting the bearings and gear mechanism from winch machine. Greasing & oiling the bearing mechanism using ISI mark standard quality grease for smooth, easy up and down moment of gate. Replacement of nuts and bolts for connecting winch machine with channels installed over the canal. Replacement of nut and bolt connecting stem rod to leaf of gate. Reinstallation of the gate and winch machine at site and checking the up and down moment. Removal of old paint by sand paper and painting of winch machine and gate with one coat of good quality metal primer and coat of paint as per prescribed colour code of gates ( Nerolec / Asian paint/ Berger Paint). Painting must be done on both sides of gate. The job includes cost of material, skilled manual labour, crane, welding charges,DG set hire charges, hire charges of tools and tackles required for the job. Fabrication and providing of spanner for moving worm gear in winch machine. 4) Kapoorpur minor gate I and II at RD 17468 of D10 canal of MRC (2.75ft x 2.25 ft):- Annual periodical maintenance of kapoorpur minor and escape gate by way of dismantling gate lifting mechanism from the supporting channel and disconnecting the stem rod from the leaf structure then extracting out the damaged gate leaf structure with the help of manual labour using tools and tackles, chain pulley block / tripod after removing accumulated mud/silt around the gate leaf. Checking for any worn out portions and welding with frame with double layered welding after properly pressing exposed portions. Servicing of the 2 ton capacity winch machine by removing the old grease and washing / cleaning with kerosene oil or any other solvent to make it dust free. Extracting the bearings and gear mechanism from winch machine. Greasing & oiling using ISI mark standard quality grease for smooth, easy up and down moment of gate. Replacement of nuts and bolts for connecting winch machine with channels installed over the canal. Replacement of nut and bolt connecting stem rod to leaf of gate. Reinstallation of the gate and winch machine at site and checking the up and down moment. Removal of old paint by sand paper and painting of winch machine and gate with one coat of good quality metal primer and coat of paint ( Nerolec / Asian paint/ Berger Paint). Painting must be done on both sides of gate. The job includes cost of material, skilled manual labour, welding charges,DG set hire charges, hire charges of tools and tackles required for the job. ) 5.Kapoorpur Escape Gate Rd 19000 of MRC(4’x3’) :- Annual periodical maintenance of the gate by way of dismantling of gate lifting mechanism from the supporting channel and disconnecting the stem rod from the leaf structure then extracting out the damaged gate leaf structure with the help of manual labour using tools and tackles, chain pulley block /crane after removing accumulated mud/silt around the gate leaf. Servicing of the 03 capacity winch machines by removing the old grease and washing / cleaning with kerosene oil or any other solvent to make it dust free. Extracting the bearings and gear mechanism from winch machine. Greasing & oiling using ISI mark standard quality grease for smooth, easy up and down moment of gate. Replacement of nuts and bolts for connecting winch machine with channels installed over the canal. Replacement of nut and bolt connecting stem rod to leaf of gate. Reinstallation of the gate and winch machine at site and checking the up and down moment. Removal of old paint by sand paper and painting of winch machine and gate with one coat of good quality metal primer and coat of paint ( Nerolec / Asian paint/ Berger Paint). The job includes cost of material, skilled manual labour, hire charges of tools and tackles required for the job. 6) Tanda head gates I and II and eat RD 6950 of D10 Canal of MRC (5’9”x2’9”):- Annual periodical maintenance of Tanda head gates by way of dismantling mechanical components of gate such as worm and worm gear, roller, rack and pinion arrangement. Extracting the gates outside channel grooves imbedded in side concrete walls using crane and manual labour. Service to rack and pinion arrangement by properly cleaning rack from dust and grease.. Servicing of worm gear by cleaning the teeth from dust and grease. Checking of leaf of the gate for any mechanical damage and repairs by straightening on heavy duty hydraulic press, welding at worn out portions of the skin plate with quality MS electrodes. Greasing & oiling of all moving parts using ISI mark standard quality grease for smooth, easy up and down moment of gate. Removal of old paint by sand paper and painting of winch machine and gate with coats of metal oxide primer and enamel paint as per the colour code for gates. Reinstallation of the serviced gates and machines at site and checking the up and down moment. The job includes cost of material, skilled manual labour, crane, welding charges,DG set hire charges,hire charges of tools and tackles required for the job. 7) Chakroi gate I and II on Tanda branch of D10 Canal at RD 8460 (6.5 ft x3.25 ft) Annual periodical maintenance of Chakroi gates I and II by way of dismantling of winch machine from the supporting channel and disconnecting the stem rod from the leaf structure then extracting out the damaged gate leaf structure with the help of manual labour using tools and tackles, chain pulley block /crane after removing accumulated mud/silt around the gate leaf. Carriage of gate structure along with winch machine and stem rod to the road sidewith the help of manual labour using tools and tackles. Checking for anyworn out/ damaged portions and welding with frame with double layered welding after properly pressing exposed portions. Servicing of the 5 ton capacity winch machines by removing the old grease and washing / cleaning with kerosene oil or any other solvent to make it dust free. Extracting the bearings and gear mechanism from winch machine. Greasing & oiling the bearing mechanism using ISI mark standard quality grease for smooth, easy up and down moment of gate. Reinstallation of the repaired gate and winch machine at site and checking the up and down moment.Removal of old paint by sand paper and painting of winch machine and gate with one coat of good quality metal primer and coat of paint ( Nerolec/ Asian paint/ Berger Paint) as per prescribed color code for gates.The job includes cost of material, skilled manual labour, crane, welding charges,DG set hire charges, hire charges of tools and tackles required for the job. Note:- The tenderers are requested to visit the site and quote the rate including rebate on old parts as per site conditions. Any modifications/ alterations of the job, absolutely necessary if required at the time of execution may be done as per actual site conditions
Rebate on Old Parts
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.41 MB
SBD140.pdf
Additional Documents • 0.42 MB
BOQ_973819.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .