A. Erection of 3.3 kV OH Electric Line from KSML camp to dept. sump of Konar Exp. OCP, BnK Area, (BOQ 1-15) B. Establishing Complete Earth continuity of Mines and installing Switchgears along With AB switch for operation of 3 nos of 3.3 KV 2000GPM Mo

Amount

Erection of metallic pole (above 10 m and upto 12 m) in cement concrete 1:3:6 1(1 cement: 3 coarse sand 6 graded stone aggregate 40 mm nominal size) Foundation incluiting excavation and refilling etc, as required

Erection of ACSR conductor of 7/3 35 mm to 7/4.00 diameter and above 2ncluding hinding etc., as required (50 m x 3 phase x6 span x 0.394 kg-354.6 Ag) (for DOG Conductor)

Supply of & SWG GL wire (for Earthing & Cradling): 400 m x 0.116 kg-46.4 A

Erection of & SWG GL. wire (for Earthing & Cradling): 464 kg

Supplying and erection of galvanised stay set for 11 KV over head lines complete with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stay clamps, turn buckle (20 mm X 600 mm 1, 7/4.00 mm dia G.I stay wire and II KV strain insulator etc in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required

Supplying and erection of 11 KV disc insulator for II KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required.

Supplying and erection of 11 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc, as required

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) pole top bracket/ cross arm for single 11 KV over head line conductor complete with 9 50 mm X 6mm flat iron clamp, bolts, nuts and washers including drilling holes for insulator pins, bolts and nuts etc and painting with primer and finish paint as required

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for two II KV over head line conductors complete with 50 mm x 50 mm x 6 mm angle iron bracket welded to the channel iron and complete with 50 mm X 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required.

Erection of pole top/ straight two wire/ V shape two wire, angle iron/ channel 11 iron, cross arm on steel tubular/ rail/ PCC pole for 11/22/33 KV as required (1 no, pole top & 1 no. straight two wire)

Supplying of two lengths of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) double pole cross arm for three wire IIKV over head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm 12 M.S. flats welded on one side to the channel iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for insulator pins/fittings, bolts, nuts and washers ete (as per drawing) and painting with primer and finish paint as required.

Erection of double pole 3 wire cross arm for IIKV/22KV/33 KV over head lines as required.

Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc as required

Dismantling of over head lines comprising of copper/ aluminium over head 15 conductor, G.I. wire, cross arms, insulators etc, as required. ((50 m x 3 phase x 5 span x 0.394 kg-295.5 kg)

Transporting of Poles from stock to work site

Supply of 8 SWG G.I. wire (for Earthing & Cradling): (50 m +5 m )x 107 span) X 0.116 KG/Meter

Erection of 8 SWG G.I. wire (for Earthing & Cradling)

Erection of metallic pole (above 10 m and upto 12 m) in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. 7 nos for EKG and 4 nos Main Sump

Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter and above including binding etc. as required (50 m x 3 phase x 5 span x 0.214 kg (for Rabbit Conductorr)

Supply of 8 SWG G.I. wire (for Earthing & Cradling): (50 m x 2 nos)+ (1 m x 50 nos) = 150 m x 0.116 kg = 17.4

Erection of 8 SWG G.I. wire (for Earthing & Cradling): 300 m x 0.116 kg = 34.8 kg

Supplying and erection of galvanised stay set for 11 KV over head lines complete with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stay clamps, turn buckle ( 20 mm X 600 mm ), 7/ 4.00 mm dia G.I. stay wire and 11 KV strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required - 2 nos for Main Sump and 2 nos for EKG

Supplying of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required.

Supplying of 11 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required

Erection of disc/ pin insulator for 11 KV over head lines as required. (27 no. Disc Insulator & 9 no. Pin Insulator)

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) pole top bracket/ cross arm for single 11 KV over head line conductor complete with 50 mm X 6mm flat iron clamp, bolts, nuts and washers including drilling holes for insulator pins, bolts and nuts etc and painting with primer and finish paint as required.

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for two 11 KV over head line conductors complete with 50 mm x 50 mm x 6 mm angle iron bracket welded to the channel iron and complete with 50 mm X 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required.

Supplying of two lengths of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) double pole cross arm for three wire 11KV over head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm M.S. flats welded on one side to the channel iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for insulator pins/ fittings, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required.

Erection of double pole 3 wire cross arm for 11KV/ 22KV/ 33 KV over head lines as required.

Supplying and making outdoor cable end jointing with cast resin compound, including lugs and other jointing materials, for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required for 120 sq. mm

Transporting of Poles from stock to work site

Supply of 11 kV, 400 A, 3 Insulators A.B. Switch

Erection cost of 11 kV, 400 A, 3 Insulators A.B. Switch

Erection of metallic pole (above 10 m and upto 12 m) in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter and above including binding etc. as required (50 m x 3 phase x 0.214 kg x nos of span) DP-DP-DP-TP-DP-DP

Supply of 6 SWG G.I. wire ((55X 2 +50)X 0.131 KG/M* span

Erection of 6/ 8 SWG G.I. wire (55 m x 8) + (55 m x 3) = 605 m x 0.131 kg = 79.255 kg

Supplying and erection of galvanised stay set for 11 KV over head lines complete with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stay clamps, turn buckle ( 20 mm X 600 mm ), 7/ 4.00 mm dia G.I. stay wire and 11 KV strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required

Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required

Supplying and erection of 11 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required.

Erection of disc/ pin insulator for 11 KV over head lines as required

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) pole top bracket/ cross arm for single 11 KV over head line conductor complete with 50 mm X 6mm flat iron clamp, bolts, nuts and washers including drilling holes for insulator pins, bolts and nuts etc and painting with primer and finish paint as required.

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for two 11 KV over head line conductors complete with 50 mm x 50 mm x 6 mm angle iron bracket welded to the channel iron and complete with 50 mm X 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required.

Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required

Dismantling of over head lines comprising of copper/ aluminium over head conductor, G.I. wire, cross arms, insulators etc. as required. ((50 m x 3 phase x span x 0.214 kg = 295.5 kg)

Transporting of Poles from stock to work site

Total impact of GST for the purpose of CTC

M/S JAI MAA ENTERPRISES

CITY ELECTRICALS