Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.5 LAccepted-AOC BIVER ROAD SHILLONG 793001 | SHILLONG | EAST KHASI HILLS | MEGHALAYA | 793001 | L1 | Accepted-AOC BID OF M/S ZOYA CONSTRUCTION CONSTRUCTION IS HEREBY ACCEPTED BEING L1 BIDDER | |
| 2 | L2₹40.5 L+₹95,449.40 (2.42%)Rejected-Finance | L2 | Rejected-Finance REJECTED BEING L2 BIDDER | |
| 3 | L3₹42.9 L+₹3.4 L (8.67%)Rejected-Finance DEEDAR MARKET ROOM NO UB 12 POLICE BAZAR SHILLONG 793001 | EAST KHASI HILLS | MEGHALAYA | 793001 | L3 | Rejected-Finance REJECTED BEING L2 BIDDER |
Tender Value
₹38 L
EMD Value
₹76,000
Closing Date
20 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SHILLONG
GE SHILLONG SHILLONG DIVISIN PIN 793002
SPL REPAIR TO STORAGE AND AREA SURROUNDING BLDG NO T 67 AND PROVN OF MISC SERVICES IN BLDG NO T 67 AT SHILLONG CANTT UNDER GE SHILLONG
2024_MES_642899_1
GE/SHL/TOKEN-70 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE SHILLONG
ALL AS PER TENDER DOCUMENT
7 documents required · 7 mandatory
₹500
Yes
GE SHILLONG
₹76,000
Yes
29 Apr 2024
17 Feb 2024
21 Mar 2024
17 Feb 2024
20 Mar 2024
1 Mar 2024
Amount
B/R SCHEDULE Taking down chowkat or frame exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutter from the frame) complete all as specified and as directed.
Taking down chowkats or frames n. exc 1.50 Sqm each with shutters (without taking off shutter from the frames) complete all as specified and as directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
Dismantling Wall and Ceiling Boards (Fibre, Pulp, insulation ,etc) or insulation boards /slabs/blankets ,any thickness,including cover fillets complete all as specified and as directed.
Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid in any mortar complete all as specified and as directed.
Dismantling floor hearth or wall tiling including cement mortat bedding but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M&L for 40mm thick PCC 1: 2:4type B2 (using 40mm graded crushed stone aggregate) as in floor, finishing cement concrete surfaces making even and smooth without using extra cement complete all as specified and as directed.
M & L for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.18sqm but not exceeding 0.36 sqm over & including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
M & L for vitrified ceramic tiles light shade 10mm thick (square/rectangular) polished area of each tiles exceeding 0.36 but not exceeding 0.42 sqm including over 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
M & L Glazed ceramic tiles in vertical surfaces of size 450x350x7mm thick including over 10mm thick rendering in CM 1:4 for laying tile finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
Demolition of brick work/stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and pre-cast concrete articles complete all as specified and as directed.
M&L for Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in in cement mortar ( 1:4) complete all as specified and as directed.
M&L for RCC M20 (nominal mixed) using 20mm graded crushed stone aggregates as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
M&L for mild steel TMT bars 6 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally in stirrups with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
M&L for formwork to sides of concrete foundations, plinth beams, lintel beam and other similar works, flat, rough finished of complete all as specified and as directed.
M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick or concrete surface, finished even and smooth without using extra cement complete all as specified and as directed.
M&L for preparation of new plastered ceiling surfaces of any height and applying two coats of oil bound distemper over a coat of alkaline resistent primer including necessary scaffolding complete all as specified and as directed.
M&L for preparation of old plastered or unplastered ceiling surfaces & applying two coats of oil bound distemper over a coat of primer and 1mm thick wall care putty complete all as specified and directed.
S&F 12mm thick toughened glass door fixed with double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other party made of mild steel heavy duty and stainless steel handle purpose made on both side with locking mechanism and necessary stopper etc. complete all as specified and as directed.
S & F Vitreous China bowl urinal flat back of size of 355x 340 x 535 mm with all fixing accessories complete all as specified and as directed. (Model No. Jaguar Cat Part No- URS-WHT-13261 or equivalent in Cera, Parryware or Hindware)
S&F in repairs vitreous china single piece EWC including seat cover, closed pattern of size 360x655x765mm complete all as specified and directed. ( Model No. Jaquar Cat Part No :- LYS-WHT-38851P180UFSM or equivalent in Cera, Parryware or Hindware)
S&F vitreous China counter top WHB ofof size 635x415x190 mm including 32mm CP waste coupling complete or equivalent in Hindware/Cera/Parryware complete all as specified and as directed. ( Model No. Jaquar Cat Part No :- ARS-WHT-39601 & Jaquar Cat Part No:-ALD-727 or equivalent in Cera, Parryware or Hindware)
S&F towel rack 600mm long with lower hangers , stainless steel complete all as specified and directed. (Model No. Jaguar Cat Part No:-AKP-35781PS or equivalent in Cera, Parryware or Hindware)
S&F single lever basin mixer fancy type tall body with 155 mm extension body fixed spout without popup waste system with 600 mm long braided hoses complete all as specified and directed. ( Model No. Jaquar Cat Part No:- KUP-35005BPM or equivalent in Cera, Parryware or Hindware)
S&F 15 mm bore CP Hand Shower (Health Faucet) with 1m long easy flex tube in chrome finish & wall hook complete all as specified and directed. ( Model No. Jaquar Cat Part No:ALD-565 or equivalent in Cera, Parryware or Hindware)
S&F soap dish holder complete all as specified and directed. ( Model No. Jaquar Cat Part No:- AKP-35731P or equivalent in Cera, Parryware or Hindware)
S&F toilet roll holder with stainless steel flap complete all as specified and directed. (Model No. Jaquar Cat Part No:- AKP-35753PS or equivalent in Cera, Parryware or Hindware)
S&F towel ring square shape stainless steel complete all as specified and directed. (Model No. Jaquar Cat Part No:- AKP-35721P or equivalent in Cera, Parryware or Hindware)
S&F corner glass shelf with bracket complete all as specified and directed. (Model No. Jaquar Cat Part No:- ACN-1173 or equivalent in Cera, Parryware or Hindware)
S&F 125mm size chromium plated shower roses with or without swivel joints including fixing to steel pipe or union complete all as specified and directed.
S&F CP single Lever Wall Mixer 3-in-1 System with provision for both hand shower & overhead shower complete with 115mm long bend pipe, connecting legs & wall flange (Without hand & overhead shower )complete all as specified and as directed. (Model No. Jaquar Cat Part No:- OPP-15125PM or equivalent in Cera, Parryware or Hindware)
S&F CP hand shower 27x27 mm square shape single flow with air effect (ABS body & face plate chrome plated) with rubit cleaning system with flexible tube in chrome finish 1.5 m long with nuts complete all as specified and as directed. (Model No. Jaquar cat part No:HSH-35537 & Jaquar cat part No:SHA-571 or equivalent in Cera, Parryware or Hindware)
S&F for Venetian blinds of width 50 mm and 5mm thick, wooden finished material as approved by GE complete all as specified and as directed.
Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
S&F 20mm bore GI tubing, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S&F 15mm bore GI tubing, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
Cutting chases for concealed water tubing and making good in cement mortar 1:3 girth of cutting n.exc 10cm in brick walls complete all as specified and directed.
S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
S&F 15mm dia angular stop valves, fancy type, chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F 15mm dia Bib taps, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F s 32mm dia brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed.
S&F 75mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and as directed.
S&F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and as directed.
S&F 110mm dia PVC (SWR) bends complete all as specified and as directed
S&F 75mm dia PVC (SWR) bends complete all as specified and as directed
S&F Stack clamps out of 75mm by 5mm flat iron and 16mm dia round iron stays ,incl bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.
M&L for rolled MS framed work as in doors or gates of angle or other section for fixing of sheets and similar works conforming to Gde Fe-290(Gde E-165) complete all as specified and as directed
S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F 18/19mm thick block board, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame work complete all as specified and directed.
S&F 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.
S&F150 mm long brass barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed.
S&F 100 mm long brass barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed.
S&F 150 mm extruded Brass handles, fabricated type polished complete all as specified and as directed.
S&F 100 mm extruded Brass handles, fabricated type polished complete all as specified and as directed.
S&F 100 mm butt hinges extruded brass with mild steel hinge pin bright polished and fixed type B-11 complete all as specified and as directed.
S&F for 30mm wide Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and as directed.
S&F for Locks, cupboard, brass, grade I, size 50 mm, 2 levers complete all as specified and as directed.
S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, side hung/sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.
M&L for 4.80 mm thick sheet glass quality and glazing/ fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed.
M&L for 4.80 mm thick frosted sheet glass quality and glazing/fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed.
M&L for seamless calcium silicate ceiling made of 1800x1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, incl finishing the joint of face board with specially formalated jointing compound and 48 mm wide fibre tabe to provide seamless finish fixed with screws to GI frame work incl two coat of putty and two coat of OBD design including GI frame for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.90 mm thick having two equal flanges 15 mm each and web of 45 mm suspended from soffit at approx 900 mm c/c with GI cleat and steel expansion fasternerswith and incl ceiling section (nexc 1.20 m lenght) 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.50 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm c/c and GI wire of 4mm suspender complete all as specified and as directed.
S&F Sauna bath of size 1500x1100x2100 mm with lamber support backrest and laded bucket wood finish hemlock stove heater 4.5kw tempered glass 8mm on heater control panel, white light with cover chromo therapy light, radio, USB connector, MP-3 player connector, lumber support backrest, thermometer and hygrometer etc. complete all as specified and directed. (Make : Jaquar JSA-NAW-MD 3150IH Sauna KAYA-IR or equivalent in kohler / Grohe).
S&F steam bath of size 1000x1000x2100mm (Square) with 3 adjustable vertical jets, steam bath (2.7 kw) and aroma dispenser with extractable drawer, essential oils, chromo light, stainless steel head shower 380x380 centered of shower area, Encloser- 6mm tempered clear glass, profiles and column finish - brilliant including steam Generator 9W, 475x185x450mm and control plate 103x103mm complete all as specified and directed (Make: Steam Bath - Jaquar Cat No. GSB-WHT-TU000B1H5TX Archimede, Steam Generator- Jaquar Cat No.JSG-WHT-NMID90 & Control Plate-Jaquar Cat No. JSW-WHT-CPSQUARE or equivalent in kohler/Grohe ).
Dismantling plain or corrugated steel sheeting, any guage, thickness incl nainital or similar pattern as in roof coverings complete all as specified and as directed.
S&F 0.50mm thick prepainted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F 0.50mm thick prepainted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and directed.
Dismantling structural steel work including doors, gates but excluding framed truss complete all as specified and as directed.
M&L for MS as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. quality conforming to Fe-410-W (Gde-E-250), quality-A complete all as specified and directed.
Dismantling of timber scantling 40 sqcm over in section in any position (unframed work) complete all as specified and as directed
M&L 2nd class hard wood in scantling clean sawn timber fixed complete all as specified and directed.
M&L for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coats of creosote oil complete all as specified and directed.
Dismantling boarding any description fixed in any position with nails complete all as specified and as directed
S&F 20 mm thick 2nd class hard wood boarding as in eaves board/fascia, planed one side with butt joints and fixed with nails complete all as specified and directed.
M&L for preparation of new or previously untreated surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer all as specified and as directed.
M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of newly steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.
Surface excavation in soft/loose soil, not exceeding 30cm deep and averaging 15cm deep and getting out complete all as specified and as directed
M & L for hardcore of broken brick/stone or boulders gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and remmed to a true surface, complete all as specified and as directed
M & L for 100mm thick PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base to floor finished rough to receive finishes complete all as specified and as directed.
M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade with grey cement and pigment complete as specified and directed.
M&L for sand filling for interlocking paver blocks complete all as specified and as directed.
M&L for providing and fixing stainless steel (Grade 304 ) railing/gate made of hollow tubes, channels,plates etc, incl welding , grinding , buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete , including fixing the railing with necessary accessories & stainless steel dash fasteners, steel bolts etc of required size on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as diretcted
M&L for complete removal of existing treatment on wall and applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistant as per IS 15489:2004, alkali & fungal resistant, dirt resistant exterior paint of any shade as ordered (Company depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed .
M&L for complete removal of existing treatment on wall surface and applying two finishing coat of oil bound distemper over a coat of primer and 1mm thick wall care putty complete all as specified and directed.
Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed etc.
Supply only Integral waterproofing compound complete all as specified and as directed
M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed
M&L for preparation of new wall surfaces and applying two finishing coat of oil bound distempering over 1mm of wall care putty complete all as specified and as directed
M&L for preparation of new plastered surface or previously untreated surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistant as per IS 15489:2004, alkali & fungal resistant, dirt resistant exterior paint of any shade as ordered (Company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed .
M & L for PCC 1:3:6 C2 (40 mm graded aggregate) as in surface channels and drains all as specified & directed.
M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.
M&L for RCC 1:2:4 (nominal mix) type B1 using 20 mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like cover slab complete all as specified and as directed
S&F for 5 mm thick 3D designer type PVC insulation panels with EPS stuck to 1mm with printed PVC sheet as per specifiecations and drawing complete all as specified and as directed
S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.
S&F for 5mm thick PVC insulation panels for false ceiling with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing complete all as specified and as directed
E/M SCHEDULE M&L for point wiring for one light/fan/exhaust fan point controlled by one, one way switch using PVC insulated unsheathed FRLSH multistranded copper conductor cable of size 1.5 sqmm nominal cross sectional area, 1100V grade, drawn in and including suitable size non metallic PVC casing caping with all necessary accessories, PVC modular board of suitable size for housing/mounting switches/sockets etc. and including PVC insulated unsheathed FRLSH multistranded copper conductor cable of size 1.5 sqmm nominal cross sectional area as earth wire and connecting to common earth dolly complete all as specified and directed.
All as per Item No. 102 above but for one 2/3 pin socket outlet, 5 Amps on same board, complete all as specified and directed.
All as per Item No. 102 above but with 2.5 Sqmm cable for socket outlet point 5 Amp on Independent board complete all as specified and as directed
M&L for point wiring for one power point socket outlet, 15A on independent board using PVC insulated unsheathed FRLSH multistranded copper conductor cable of size 4sqmm nominal cross sectional area, 1100V grade, drawn in and including suitable size non metallic PVC casing caping with all necessary accessories, PVC modular board of suitable size for housing/mounting switches/sockets etc. and including PVC insulated unsheathed FRLSH multistranded copper conductor cable of size 4sqmm nominal cross sectional area as earth wire and connecting to common earth dolly complete all as specified and directed.
S&F modular switch 1 way, 1 module, 6A, 230~250 volt , AC supply, ISI Marked complete all as specified and directed.
S&F modular switch 1 way, 1 module, 16A, 230~250 volt , AC supply, ISI Marked complete all as specified and directed.
S&F modular socket, 6A, 2/3 pin combined, 2 module, 230~250 Volts, 50 Hz , AC supply, ISI Marked complete all as specified and directed.
S&F modular socket, 6A/16A, 2/3 pin combined, 2 module, 230~250 Volts, 50 Hz , AC supply, ISI Marked complete all as specified and directed.
S&F LED light fitting round shape 15watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
S&F LED light fitting round shape 12watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
S&F LED light batten fitting 1x 20W, 220V, AC with driver, holder including LED tube light fixed to wall/ceiling with 02 Nos PVC block of suitable size and connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete including taking doown old unserviceable light fitting all as pecified and directed..
S&F ceiling rose surface bakelite 65 mm x 50 mm, three terminals suitable for 230 Volts AC, 6 Amps complete all as specified and directed.
S&F Exhaust fan, 300mm, 230 volts, plastic body including making all necessary electric connection including cutting hole of required size on wall, fixing on & including wooden frame and making good disturbed surface of wall complete all as specified and as directed.
S&F in repairs MCB Distribution Board, TPN, 4 way, 415 volts, 50 Hz, vertical, sheet metal enclosure, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified and directed.
S&F MCB TPN, 100 Amps, 10 kA rupturing capacity, 415 Volts complete all as specified and directed.
S&F MCB SP, 6 to 32 Amps, 'C' series, 10KA, 240V and to be housed in DBs including necessary connection complete all as specified and directed.
M&L for sub main wiring with two single core 4.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH , ISI marked, PVC insulated multistranded copper conductor cable of size 4.0 sqmm green colour as earth lead including suitable size non metallic PVC casing capping including taking down unserviceable wiring complete all as specified and directed. (Note: two run of 4.0 sqmm cable , one run of earth wire of 4.0 sqmm and one run of PVC casing capping shall be measured as one length).
M&L for sub main wiring with two single core 6.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH , ISI marked, PVC insulated multistranded copper conductor cable of size 6.0 sqmm green colour as earth lead including suitable size non metallic PVC casing capping including taking down unserviceable wiring complete all as specified and directed. (Note: two run of 6.0 sqmm cable , one run of earth wire of 6.0 sqmm and one run of PVC casing capping shall be measured as one length).
M&L for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I.complete all as specified and as directed.
Excavation in trenches not exceeding 1.5m wide and not exc. 1.5m depth and getting out in soft/loose soil complete all as specified and as directed.
Excavation in trenches not exceeding 1.5m wide and exc. 1.5m depth not exc 3.0m depth and getting out in soft/loose soil complete all as specified and as directed.
Returning, filling, including spreading, leveling, watering and well ramming in layers not exc. 25cmin soft/loose soil complete all as specified and as directed.
Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed
Supply and laying dry river sand filling for cable protection with a layer of 8cm deep before laying cable and 15cm covering above the top edge of cable after laying complete all as specified and as directed. (Note: Punned thickness shall be measured).
M&L for Fly Ash compact modular bricks locally available of size laid dry width wise across the line of cable in trenches for protection of UG cable complete all as specified and as directed.
M&L for 40 mm bore galvanised iron tubing, light grade, ISI marked fas in protection of cable including necessary fittings complete all as specified and as directed.
Supply, laying & testing of LT XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts grade and cross-sectional area 50 Sqmm 3.5 Core complete all as specified and as directed.
M/S T N CONSTRUCTION
H K Enterprise
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .