Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹14.8 LAccepted-AOC | 1 | Accepted-AOC OK | |
| 2 | 2₹16.9 L+₹29,900 (1.80%)Rejected-AOC | 2 | Rejected-AOC OK |
Tender Value
₹15 L
EMD Value
₹15,000
Closing Date
21 Jun 2023, 3:00 pmClosed
THE COMMISSIONER TIRUCHENGODE
TIRUCHENGODE MUNICIPALITY
Revenue Fund - Providing Alround of Chain link fencing with entrance roof sheet erection at Seetharampalayam Mariyamman Kovil Front Open Well Ward No.1 and Erection of Grill door with MS Weld mesh at ward no.19,15,16 Open Well in Tiruchengode Mun
2023_MAWS_326253_1
7835
Open Tender
Civil Works - Others
Works
180 days
TIRUCHENGODE MUNICIPALITY
Please refer Tender documents.
1 document required · 1 mandatory
₹0
₹15,000
1 Aug 2023
12 Jun 2023
21 Jun 2023
12 Jun 2023
21 Jun 2023
12 Jun 2023
Amount
Earth work excavation for foundation in all kinds of soils and subsoils to full depth as may be directed except hard rock requiring blastering inclusive of shoring strutting and bailing out water wherever necessary and refilling the sides of foundation which excavated earth in layer of 15cm thick well rammed and consolidated and depositing the surplus earth within the compound in places shown by the departmental officers with intial lead of 10 metres and initial lift of 2 metres etc., complete.
Cement concrete 1:4:8 mix ( One cement four sand and eight aggregate) using 40mm ISSmetal including mixing, laying, consolidating curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification.
Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38
Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification
Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification
Providing chain link fencing using 10mm gauge at 2" x 2" size including tying with binding wire including cost, conveyance of all materials at site and all labour charges etc., complete as per standard specification
Fabricating supplying and fixing of pre painted galvanized iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.
Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.
Towards the charges for providing Well Name Board upto 4 m length x 0.30m width arch or rectangle type With MS Plate welding , lettering charges including all labour charges etc complete.,( LMR)
Supply and fixing in position of weld mesh door made with 7.50cm x 2.50cm 10 Gauge weld mesh and supported with 25 x 5mm M.S.Patta and framed with 35 x 35 x 5mm M.S. L angle including cost and conveyance of materials and all labour charges for welding, jointing and fixing in position etc., complete complying with SS.
M/S JAYAM MAARUTHI ELECTRICALS
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .