SPECIAL REPAIR TO BLDG NO CW-58, VET - 3, VET- 52 AND VET- 8 AT ARMY PUBLIC SCHOOL, ASC CENTRE AND COLLEGE UNDER GE (CENTRAL) BANGALORE

Amount

Dismantling of plain,corrugated,semicorrugated stel sheets of any type in roof coverings complete all as specified and as directed.

Demolition of brick work,precast concrete block walling or stone boulder masonry, built in cement mortar including all quoins,arches, pillars etc, complete all as specified and directed.

Dismanling of timber scantligs 40 Sqcm and over in section, in un-framed work & in any position complete all as specified and directed.

Demolition of unreinforced cement concrete in floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

M&L for Plain cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate in roof kerbs or mud stops,rounded or chamfered on edges complete all as specified and directed.

S & F Aluminium anodised snap grid frame for false ceiling of grid size 605X605 mm including hangers and cleats including non asbestos fibre cement building board 4mm thick of size 60X60 cm fixed with nails to frame work or with staples on snap grid including dismantling boarding of any description, fixed in any position complete all as specified and directed.

Taking down chowkhats or frames area not exc 1.5 Sqm (with out taking off shutters from the frame) including making good the disturbed surfaces to match with the adjoining surfaces complete all as specified and directed.

Taking down chowkhats or frames area exc 1.5 Sqm but not exc 4 sqm (with out taking off shutters from the frame) including making good the disturbed surfaces to match with the adjoining surfaces complete all as specified and directed.

Taking down shutters of any description exc 1 sq. m and not exc 2 sqm each including making good the disturbed surfaces to match with the adjoining surfacescomplete all as specified and directed.

Taking down cement plaster on Brick / Concrete surfaces incl raking out joints, hacking for key scrubbing down with water and Removing Rubbish all as directed.

S&F Second class hard wood for Plain, solid, straight frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

M & L for Plates (plain or chequered) channels,square cut or notched (ordinary and counter sunk forming holes without any attachment Fe - 290 (Gde E-165) complete all as specified and as directed.

S &F Mild steel screw bolt 5 to 10mm dia machine made with hexagonal head at one and screwed the other or screwed bolts each screwed and to be filled with washer and one hexagonal or square nut not exceeding 5cm long complete all as specified and as directed.

Demolition of unreinforced cement concrete in roof including removing of existing APP membrane, plastering/rendering etc., complete all as specified and directed.

M & L for Cleaning the roof surface by roughening, sweeping clean and washing down and applying cement slurry @ 3kgs/sqm complete all as specified and directed.

M&L for rendering 10mm thick cement mortar (1:3) on fair faces of Concrete Surfaces of roof finished even & smooth without using extra cement mixed with integral water proofing compound complete all as specified and directed. (Note : water proofing compound will be measured separately)

M & L for Plain Cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate in roof padding, coving in chajjas, roof kerbs or Mud Stops, rounded or chamfered on edges complete all as specified and directed.

M &L for water proofing treatment over RCC roof surfaces complete complete all as per manufacturer instructions, all as specified & directed :- (i) Preparation of roof surfaces & Applying oil bound bitumen primer @ 0.20 kg/sqm (ii) Providing 3mm thick APP modified water proofing membrane weighting not less than 3.6 kg/sqm reinforced with non woven polyester matt weighing not less than 160 gm/sqm having softening point not less than 150mm centigrade, having tensile strength of 650 N/sqcm and 350 N/sqcm in longitudinal and transverse directions respectively of the reinforced tearing strength of 180N by torch application with minimum 10cm side overlapping and 15cm end lap (iii) Applying a coat of blown grade hot bitumen 90/15 over the membrane @ 1.2 kg/sqm top of membrane surface (iv) Applying solar reflective bituminous aluminium paint @ 0.10 kg/sqm.

M&L for Sadarhali stone slab18-20mm thick as in flooring, steps, jambs, pillars, window- cills, steps/stairs, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over & including screed bed 15mm thick cement mortar (1:4) and Rounding to edges, polishing etc complete all as specified and directed.

M&L for Sadarhali stone slab18-20mm thick stone slab for skirting, riser, dado and like jointing in cm (1:3) cluding pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over & including backing coat 10 mm thick rendering in cement mortar (1:3) complete all as specified and directed.

M & L for rendering 10mm thick cement mortar (1:3) over concrete ceiling surfaces finishing even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 15mm thick cement mortar (1:6) over brick or concrete wall surfaces finished even & smooth without using extra cement all as specified and directed.

M&L for Rendering 15mm thick cement mortar (1:4) over brick or concrete wall surfaces finished even & smooth without using extra cement all as specified and directed.

M&L Rendering 10mm thick CM (1:4) over brick or concrete wall surfaces finished even & smooth without using extra cement all as specified and directed.

M& L for rendering 20 mm thick in two layer i.e., first layer is 10mm thick CM (1:6) and second Layer is 10mm thick CM (1:4) mixed with waterproofing compound on stone Masonry surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note : WPC will be measured & paid seperately)

M&L for preparation of newly plastered wall surfaces and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, alkali & fungal reisistance, dirt resistance exterior emulsion paint of required shade (Company Depot Tinted ) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.9 litre/ 10 Sqm complete all as specified and directed.

M&L for complete rermoval of existing treated wall surfaces and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, alkali & fungal reisistance, dirt resistance exterior emulsion paint of required shade (Company Depot Tinted ) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.9 litre/ 10 Sqm complete all as specified and directed.

Supply only water proofing compound, liquid ISI marked complete all as specified and as directed.

M&L for preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed

M&L for preparation of newly plastered wall surfaces and applying two coats of Acrylic emulsion distember over a coat of self primer on 1mm thick wall care putty finished to smooth surfaces complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint all as specified and as directed.

S&F Mild steel rolled sections as in main and cross beams, hip and jack rafters; pulins where connected to common rafters and running rails ; fixed with angle cleats or other connecting plates, conforming to Fe-410-W(Gde-E-250) quality-B complete all as specified and directed.

S&F Mild steel framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S &F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as inroof covering/cladding towall,fixed with self tapping screws complete all as specified and as directed.

S &F for Pre- painted galvalume aluminum zinc coating, 150 AZ, GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as inroof covering / cladding / ridges towall,fixed with self tapping screws complete all as specified and as directed.

S &F for Fibre glass reinforced translucent corrugated sheeting 2mm thick with two corrugations side lap fixed with coach screw and washer in roof, wall etc.complete all as specified and as directed.

M&L for Precast cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregate as in solid block masonary exc 10 cm in width and setting in cement mortar (1:6) complete all as specified and directed.

M & L for cutting holes in brick walls exc one brick but not exc two bricks, built in cement mortar for inserting hold fasts and making good dismantled portion in cement concrete (1:2:4) type B-1 and finish the surface to match with adjoining surfaces complete all as specified and directed.

M & L for Pressed steel door frames of section 125mm x 60mm, made with 1.25mm thick M S sheet, with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

M & L for Pressed steel door frames of section 105mm x 60mm, made with 1.25mm thick M S sheet, with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S & F Mild steel bands, straps, support clamps, hold fasts etc and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M&L for PCC 1:2:4 type C1 using 20mm graded stone aggregate as in coping, block for hold fast block, filling in frame/chowkat or similar work including necessary formwork and finished the surface to match with existing all as specified and directed.

M & L for repairs / rehabilitation of existing ceiling of RCC slab with the following mentioned treatment complete all as specified & directed :- (a) Preparation of surface : Removing all loose and spalling concrete from ceiling of RCC slab by chiselling / picking upto depth of 50 mm with chisel hammer without impact on concrete and cleaning the exposed reinforcement with wire brush and sand plasting the surface using river sand with minimum of 6kg pressure at the nozzle end by mechanical compressor including all scaffolding, machinery, tools, takles and men material including removing the debris upto a distance of 15 mtr (b) Grouting : Drilling of 12mm dia holes and fixing of 8mm PVC nozzle. Grouting the nozzle with cement mixed with Fosroc CEBEX 100 expanding grout mix until rejection with 4kg pressure pump.

(c) Treatment to existing reinforcement : Cleaning the reinforcement with fosroc Rebakleens RR rust remover and applying fosroc nitopotime zinc rich primer to the existing reinforcement . (d) Fixing of reinforcement : Drilling of 8mm dia and fixing of 8mm dia with fosroc lokfix epoxy resin @ 150 mm c/c both ways (e) Fxing of WELD mesh: Mild steel weld mesh of size 10mm x 100 mm, 3mm dia wire shall be fixed with shear connectors of depth 75mm. (f) Shotcreting: (i) Before carrying out shotcreting, the preapred concrete surface shall be suitablly wetted with fosroc nitobond SBR latex mixed with cement as a bond coat. (ii) Carrying out shotcreting with mixed proportion of cement 01 part sand 03 part aggregate 01part and reliance recron poly propylene fibers 125 grms per bag of cement to from a thickness on an average 50 mm (iii) Curing the shotcreted area for at least 7 days.

S&F Powder coated aluminium sliding window, three track, frame, two glazed shutter & one wiremesh shutter with the following specification all as specified & directed :- (i) Aluminium frame section 116x36.50mm, 1.80mm thick (ii) Aluminium shutter glazed/skeleton section 50x20mm 1.50mm thick. (iii) Aluminium grill size 50mmx50mm and 5mm dia bars (iv) Fixing arrangements : lugs / hold fast in walls embedded in PCC (1:3:6) type C-1 including making good the distributed surfaces to match with adjoining surfaces (v) Glass 4mm thick orinary quality and fixed with rubber gasket for glazed shutter etc. (vi) Stainless steel wire mesh 0.36mm nominal dia avg width of aperature 1.14mm and fixed with rubber gasket for glazed shutter etc. (vii) Aluminium disc /bow hanle and locking system complete.

S&F Powder coated (not less than 50 micron) aluminium Ventilator (partially fixed glazing and Partially louvered glazing) with the following specifications all as specified & directed :- (i) Aluminium frame section 45x25mm, 1.80mm thick. (ii) Fixing arrangements : lugs / holdfast in walls embedded in PCC (1:3:6) type C-1 including making good the distributed surfaces to match with adjoining surfaces. (v) Frosted glass 4mm thick (partially fixed glazing and Partially louvered glazing) and fixed with rubber gasket.

S & F powder coated (not less than 50 micron) alluminium frame for doors and windows,ventilators with one or more rebates including jointing cleats for fixing etc. complete all as specified.

M&L for Particle board 18/19 mm thick, medium density, flat pressed,single layer type or three layer type with BWR type adhesive,fixed with screws to timber frame work complete all as specified and as directed.

S & F Sheet glass 4mm thick, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and as directed.

S&F Second class hardwood glazed and skeleton shutters 30 mm thick, open rebated and prepared to receive glass, gauze etc.edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a) complete all as specified and as directed.

S &F Flush shutters 30 mm thick solid core construction, with block board core and plywood face panels commercial type on both sides complete all as specified and directed.

Supply and fixing Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F Butt hinges 100 mm size, medium weight, cold rolled, mild steel complete all as specified and directed.

S&F Butt hinges 125 mm size , medium weight, cold rolled mild steel complete all as specified and directed.

S&F Extruded aluminium alloy handles 150 mm size fabricated type complete all as specified and directed.

S&F aluminium anodised barrel towerbolts 150 mm long of extruded section and fixed complete all as specified and directed.

S&F aluminium anodised barrel towerbolts 200 mm long of extruded section and fixed complete all as specified and directed.

S&F aluminium alloy,anodised,sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue,anodised,with hard drawn steel spring, overall length of cover plate 140mm fixed in floor complete all as specified and directed.

S & F Mild steel ordinary rat tail rod pattern springs 300mm long, including roller and roller plate complete complete all as specified and directed.

M&L for TMT bars 6 to 8 mm cut to length bent to shape required including cranking hooping ends binding in & wine annealed not less than 0.9 mm dia or securing with clips all as specified and as directed.

M&L for Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in 100 mm thick sub base of flooring complete all as specified and directed.

M&L for rounding to edges of stone slabs one edge, such as in steps,cooking platform,and other similar situations including mirror polishing complete all as specified and as directed.

M&L for Granite stone slab 18-20mm thick work in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite lncluding rounding of edges including mirror polishing complete all as specified and directed.

M&L for Plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in 25 mm thick levelling course complete all as specified and directed.

M & L for Dark Shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including screed bed 15mm thick cement mortar (1:4) complete all as specified and directed.

M & L for coloured Glazed ceramic tiles of size 450 x 350x 7mm thick in vertical surface such as skirting/ dado etc set and jointed in neat cement slurry and pointed in white or colour cement to match over & including backing coat 10 mm thick cement mortar (1:4) all as specified and directed.

M & L for complete removal of existing treatment from wall surfaces and applying two coats of Acrylic emulsion distemper over a coat of self primer on 1mm thick wall care putty finished to smooth surfaces all as specified and directed.

M&L for Preperation of new steel surfaces of any description exc 10cm width or girth and applaying two coats of synthetic enamel paint over a coat of red oxide primer all as specified & directed.

M&L for Preperation of old treated steel surfaces exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L Preparing new wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L Preparing surface of wood and wood based materials new or old of any desciption and girth, not otherwise described, and treated with creosote oil complete all as specified and directed.

M&L for PCC (1:3:6) type C1 using 40mm graded stone aggregate of as in 75mm thick Plinth Protection finishing even and smooth without using extra cement including joints sealed with sealing compound Grade ‘A’ complete all as specified and directed.

S & F in repairs Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F PVC solid door frame of size 50mm x 47 mm, made out of 5mm plain Colour PVC sheet reinforced with MS square tube , supplying and fixing in opening as per specification and drawing shown in SSR 2004 Part II. complete all as specified and as directed.

S & F Factory made solid panel PVC door shutter 30mm thick (with fittings) (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain Colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain Colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain Colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site as per specification and drawing shown in SSR 2004 Part II. complete all as specified and as directed

Taking up or down steel water tubing galvanised along with fittings and connections 25 mm bore or any other type of pipe complete all as specified and as directed.

Taking up or down steel water tubing galvanised along with fittings and connections 20 mm bore or any other type of pipe complete all as specified and as directed.

Supplying and laying CPVC pipes 40 mm outer dia, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

Supplying and laying CPVC pipes 25 mm outer dia, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

Supplying and laying CPVC pipes 20 mm outer dia, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

S & F in repairs stop valves / Angle cock fancy type, concealed type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe 15 mm dia bore or for unions and fixed complete all as specified and as directed.

S & F in repairs Bip taps cast copper alloy Chromium plated, fancy type, with crutch of butterfly handles screwed down screwed for iron pipes 15 mm dia bore complete all as specified and as directed.

S & F square grating PTMT of size 150mm with or without waste hole ( Minimum wt 100gms) fixed complete all as specified and as directed.

S & F in repairs PVC Waste pipe 32/40mm dia for WHB/Sink complete all as specified and as directed.

S & F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/ plastic cleats (Minimum weight 300gms) all as specified and as directed.

S&F Vitreous china water closet pedestal pattern (EWC) wash down with P or S trap including connection to flush and water pipe etc complete all as specified and as directed.

S&F Plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device for EWC complete all as specified and as directed.

S & F in repairs Viterous China hand wash basin, white flat back of size 550x400mm including brackets, with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed with the following accessories complete all as specified and as directed :- (i) Pillar taps, Fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe15mm dia bore (ii) Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc.

S & F in repairs Vitreous China urinals of size 430X370X340 mm bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe and union discharge pipe and 32 mm dia PVC waste pipe all as specified and directed.

S & F PVC (SWR) floor trap 75 mm dia outlet, plain with grating including jointing with solvent cement all as specified and directed.

S & F in repairs Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats all as specified and directed. (Minimum weight 190gms)

Demolition of drain or PVC pipes 100mm diameter including fittings of any description complete all as specified and directed.

S & F in repairs PVC (SWR) pipes 110 mm single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed

S & F in repairs PVC (SWR) pipes 110 mm single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

S & F in repairs PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints,laid in trenches or in floors complete all as specified and directed

S&F PVC (SWR) vent cowl 110 mm complete all as specified and directed

S & F PVC (SWR) bends 110 mm dia provided with oval access door complete all as specified and directed

S&F PVC Connections 15 mm dia length 450 mm with PTMT nuts of complete all as specified and directed.

Demolition of reinforced Concrete of any description and in any position not otherwise specifically provided for all as spcified and directed

M & L for Reinforced cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate (nominal mix) in chajjas including necessary formwork all as specified and diected.

S & F Rotational moulded polye?thylene water storage tank of capacity 1000 litres (cylindrical vertical with closed top) triple layered, hoisted and fixed in position all as specified in SSR Part I with following accessories all as spcified and directed :- (i) Tank adaptor 25mm (ii) Gun-metal globe or gate valves of 25mm dia with iron wheel head, screwed both ends for iron pipe and fixed (iii) Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe 25mm dia and fixed

M&L for excavation in trenches not exc 1.50 m wide and not exc 1.5 m deep and taking out in soft/ loose soil all as spcified and directed

M&L for Plain Cement Concrete (1:4:8) type D-2 using 40mm graded stone aggregate in foundation filling and mass concrete all as spcified and directed

M&L for cement concrete (1:2:4) type B-2 using 40mm graded stone aggregate as in surface channels and drains complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc all as specified and as directed.

Returning filling soil in including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick layers complete all as specified and directed.

Removing excavated soil to a distance exc 250 m and but n.exc 500 m and depositing where directed complete all as specified and directed.

Surface excavation not exc 30cm and avg depth not exc 15cm in soft loose soil complete all as specified and directed.

M & L for Hardcore fo gauge not exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface all as specified and directed.

M&L for PCC (1:3:6) type C1 using 40mm graded stone aggregate as in 75mm thick sub base to flooring complete all as specified and directed.

M&L for Plain Cement Concrete (1:3:6) type C-1 using 20 mm graded stone aggregate cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates, back filling of pressed steel door frames, troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed.

M&L for Chequered cement concrete tiles of size 30x 30x 25 mm thick, with grey cement and pigments set, jointed and pointed in neat cement slurry in floors including screed bed 20 mm thick cement mortar (1:6) complete all as specified and directed.

M & L for Sand Cushioning under floor including watering and consolidated complete all as specified and directed.

M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment complete all as specified and directed.

Dismanling timber scantligs 40 Sqcm and over in section, in any position in un-framed work.

S&F IInd class hardwood in scantlings ,rectangular or triangular in section,clean sawn,framed and fixed complete all as specified and directed.

S &F mild steel screw bolt,5 to 10mm dia machine made with hexagonal head at one and screwed the other or screwed bolts each screwed and to be filled with washer and one hexagonal or square nut not exceeding 5cm long complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, bell, light fittings etc removing materials for taking credit (credit for above items should be made as per conditions seperately) and making good distrubed surfaces of wall, floors, etc complete all as specified and directed.

M&L for Concealed Point wiring with 1.5 sqmm single core PVC insulated FRLS unsheathed cable 1100 volts grade with multistranded copper conductor conforming to IS-694 1990 with ISI marked (for phase, neutral and earth) drawn in and including non metalic rigid PVC conduit medium grade not less than 20mm dia with ISI mark and all conduit accessories concealed including cutting / chases in wall /ceiling /fixed to roof / truss/ columns etc and including factory made branded make embossed galavanised steel pressed terminal boxes alongwith size modular cover plates with frames fixing modular switches, sockets, regulators etc.of suitable size modules and 1.5sqmm earth wire cable to be connected to common earth dolly complete all as specified and directed for the following :-

One light /Fan / Bell point controlled by one modular switch 6 Amps one way

One 3 pin Point 6 Amps switch socket outlet point controlled by one switch on the independent board

One 3 pin Point 6 Amps switch socket outlet point controlled by one switch on the same board with other switches

All as per item No.121 here-in-before but with 2.5 sqmm size single core multistranded copper conductor cable for 3 pin 16 Amps Modular switch socket combination outlet on independent board with 2.5 sqmm FRLS insulated and unsheathed copper conductor as earth and connected to earth dolly -ditto-

S&F Modular switch 1 way 6 Amps,1 module 240 Volts AC complete all as specified & directed.

Supply and fix socket, 6Amps - 2/3 pin combined 2 modules complete all as specified & directed.

Supply and fix modular switch 1 way 16Amps,1 module complete all as specified & directed.

Supply and fix socket, 6 / 16Amps - 2/3 pin combined 2 modules complete all as specified & directed.

S & F Ceiling rose, 3 phase / PVC/ polycarbonate, isolated body including PVC square blocks complete all as specified & directed.

S&F Stepped type electronic modular fan regulator 2-module, modular type 120Watts , 2 Module 230 Volts AC complete all as specified & directed.

S&F in replacement LED tube light fitting 10 watts 6000K, 2' long 230 volt, with aluminium extruded channel powder coated with diffuser for glare free light complete with all fixing accessories such as 2 nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed.

S&F in replacement LED tube light fitting 20 watts 6000K, 4' long 230 volt, with aluminium extruded channel powder coated with diffuser for glare free light complete with all fixing accessories such as 2 nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed.

Supply and fix recessed type LED Light 2' x 2' LED luminare 35/36 watt, 220 V AC with polymer diffuser with accessories suitable for armstrong / Grid ceiling with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

S&F bldg street light fitting LED 35 Watt, 230 Volts AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection and including connection up with twine core twisted flexible copper conductor cable with 1.5 M long suitable size all as specified and directed.

S&F Steet light bracket made out of 25 mm bore GI Light grade 1.00 M long to required shape as in bracket for steet light fittings fixed with two pair of MS flate iron clamp of size 50mm X 6 mm thickness of required shape with nuts, bolts and washers suitable for steel tubular pole including painting of mild steel flate iron surface with two coates of synthetic enamel paint over a coat of red oxide primer complete including taking down unserviceable one all as specified and directed.

Supply and fix Sheet metal enclosure (ISI marked) VTPN Distribution Board, 4 way double door type 415 volts, complete all as specified & directed.

Supply and fix Sheet metal enclosure (ISI marked) distribution board for 240 volts, SPN 8 way horizontal type, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete all as directed.

S & F MCB single pole 6 to 32 Amps 240 volts, 10 kA rupturing, C curves capacity providing in DB complete all as specified

Supply and fix MCB single pole & neutral 32 Amps 240 volts, C series,10 kA rupturing capacity

Supply and fix MCCB Tripple pole & neutral 100 Amps 415 volts, 16 kA rupturing capacity providing in DB complete all as specified.

M & L for Taking down ceiling fan 1200mm / 1400mm, dismantling, preparation of entire surface and spray painting one coat complete with synthetic enamel paint by using spray gun including fittings etc and re-assembling, refixing back with connecting up with new twin core cable of suitable size from ceiling rose to connector connecting of earth wire, with & including replacement of fan capacitor 2.5/3.15 MFD, canopy, bearing/bush, rubber bushes minor nuts bolts screws washers greasing in fan bearing complete all as directed

M & L for Taking down Exhaust fan of any size, dismantling, preparation of entire surface and spray painting one coat complete with synthetic enamel paint by using spray gun including fittings etc and re-assembling, refixing back with connecting up with new twin core cable of suitable size from ceiling rose to connector connecting of earth wire, with & including replacement of fan capacitor 2.5/3.15 MFD, canopy, bearing/bush, rubber bushes minor nuts bolts screws washers greasing in fan bearing complete all as directed

M & L for Rewinding of ceiling fan motor using appropriate size of copper enamelled winding wire including varnishing ,heating with proper insulation complete and testing for smooth functioning complete all as specified and directed .

Taking down and Refixed any type and size of wall mounted fan, any description after making necessary connections & testing on completion and making good distrubed surfaces of wall, floors, etc complete all as directed.

Supply and fixing ceiling fan 1200mm sweep with blades, down rods, electronic regulator and accessories,230 Volts, Min air delivery 210 CFM with service value 6 BEE,Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and fixing wall mounted fan with accessories, 230 Volts, 400 mm sweep, 3 blade wall fan, Min air delivery 105 CFM with service value Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply, laying,testing and commissioning XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables ( heavy duty) with stranded aluminum conductor, 1100 Volt grade on walls with fixing accessories of size 50 Sqmm 3.5 Core all as specified and directed.

Supply, fixing ,testing and commissioning XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables ( heavy duty) with stranded aluminum conductor, 1100 Volt grade on walls with fixing acessories of size 16 Sqmm 4 Core all as specified and directed.

Supply and lay common burnt bricks size 230 x 115 x 75 mm, bricks of sub class B,laid at right angle on the cable complete in trenches for cable protection complete all as specified and directed.

Supply and spreading sand in trenches for cushioning of UG cables complete all as specified and directed.

M & L for Earthing with galvanized steel earth plate electrode 600x600x6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to Galvanised earth lead wire 4.0mm dia by means of bolts,nuts,check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 connected to earth test point, with and including 15mm bore light grade GI protection pipe 7.5 metre long for earth, PCC (1:2:4) pit with RCC (1:2:4) type B-1 cover, 40mm thick reinforced with 8mm dia TMT bars @ 100mm both ways with lifting hooks made out of 6mm dia MS bars, watering arrangement with 20mm dia medium grade pipe, funnel, wire mesh, common salt chorcoal, necessary excavation and earth work in any type of soil, testing on completion including dismantling of old earthing pit etc complete all as specified and directed

M & L for Earthing complete with galvanized steel earth plate electrode 600x600x6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to Galavnised iron strip 25x4 mm as earthing lead by means of bolts,nuts,check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 connected to earth test point, with and including 15mm bore light grade GI protection pipe 7.5 metre long for earth, PCC (1:2:4) pit with RCC (1:2:4) type B-1 cover, 40mm thick reinforced with 8mm dia TMT bars @ 100mm both ways with lifting hooks made out of 6mm dia MS bars, watering arrangement with 20mm dia medium grade pipe, funnel, wire mesh, common salt chorcoal, necessary excavation and earth work in any type of soil, testing on completion including dismantling of old earthing pit etc complete all as specified and directed

Design, Fabrication, supply, installation, commissioning and testing Double Door Panel board manufactured from CPRI approved firm with canopy head, out door, cubical type panel board of over all min dimension 1.2 m (L) X 1.00m (H) X 0.50m (W) fabricated with 3mm thick CRCA sheet fixed on mild steel angle iron 50X50X6 mm thick frame, totally enclosed type dust & vermin proof back side open-able fixed with hinged shutter and front side open-able with hinged shutter and locking arrangement for individual MCCBs/MCBs , powder coated finished both internally and externally suitable for 415Volt AC 50 Hz 3 Phase 4 wire system by means of Alluminium bus bar of 300 Amps Capacity (Main bus bar ) and 600 Amps Loop Bus bar with coloured insulating tape/sleeves mounted on porcelain or synthetic insulators with provision for fixing MCCBs/MCBs necessary inter connections with Aluminium bar/strip duly coloured code insulation and providing under mentioned equipments & accessories including connections of all out going/in coming existing/New cables of required size Contd/-

and including PCC foundation in (1:3:6) type C1 of 0.5 mtrs height above GL and 0.30mtrs below GL including necessary earth work complete all as specified and as directed:- (a) INCOMING: MCCB 4 pole 160Amp, Icu=Ics=25KA, Adjustable thermal and adjustable Magnetic setting with extended terminals - 01No (b) OUTGOING: (i) MCCB 4 pole 100Amp, Icu=Ics=16KA, Adjustable thermal and adjustable Magnetic setting with extended terminals -02 Nos ii) MCCB TPN 100-63Amp, 16KA, - 02 Nos . iii) Indicating lamp LED type 240Volts 50 Hz AC -one set of 3

Supply and fix Sub main wiring with 2 runs of 4sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn & including non metallic PVC grey conduit with all accessories alongwith one run of 4 sqmm single core PVC insulated & unsheathed copper conductor as continuous earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring complete all as specified and directed. (Note : Three run of 4sqmm & one run of conduit altogether measured as one unit )

Supply and fix Sub main wiring with 2 runs of 6sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn & including non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6 sqmm single core PVC insulated & unsheathed copper conductor as contineous earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring complete all as specified and directed. (Note : Three run of 4sqmm & one run of conduit altogether measured as one unit )

S&F sheet metal enslosure single pole and neutral with a two pin & earth plug and socket complete with 1 single pole MCB 20 Amps 'C' series 10 KA breaking complete all as specified and directed.

S&F Flood Light fitting with Halogen 60 Watts capacity, warm white suitable for indoor Auditorium 230 Volts AC with high pressure die cast aluminum housing and heat resistant with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including connecting up with twine core twisted flexible copper conductor cable with 1.5m long suitable size all as specified and directed.

S&F Bell push button single pole 5 Amps 230 volt one way complete all as specified and directed.

Supply and fix Auditorium bell electronic, music type, 230 volt ACall as specified and directed.

S & F Exhaust fan 200 mm sweep made of sturdy engineering plastic with louvers shutter 230 Volts, 50 Hz, 1200 RPM noiseless, copper winding with self closing louvers and blades fixed in position after necessary core cutting wall to required size, making good of the distured surface of wall as per its original specifications , making necessary electrical connection & testing on completion all as specified & directed . (Note : The quoted is inclusive for any addtional cutting of wall & making good of disturbed surface of wall to its original specifications).

S & F Modular White cover plate with frame, 2 module all as specified & directed .

S & F Modular White cover plate with frame, 3 module all as specified & directed .

S & F Modular White cover plate with frame, 6 module all as specified & directed .

S & F Modular White cover plate with frame, 8 module all as specified & directed .

S & F Modular White cover plate with frame, 12 module all as specified & directed .

S & F Modular Metal flush box 2 module all as specified & directed .

S & F Modular Metal flush box 3 module all as specified & directed .

S & F Modular Metal flush box 6 module all as specified & directed .

S & F Modular Metal flush box 8 module all as specified & directed .

S & F Modular Metal flush box 12 module all as specified & directed .

GKR and CO (BID ID -3483230)

KDR CONSTRUCTION (BID ID -3470792)

B AND H CONSTRUCTIONS (BID ID -3482401)