SPECIAL REPAIR TO TECH FLT HANGAR AT AF STATION SONEGAON

Amount

Demolition of cement concrete unreinforced in ground floor and paving not exceeding 15 cm thick (below or above G.L) complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Nanital or similar pattern fixed on roof/ wall clading coverings complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed .

M&L for PCC (1:2:4) type B-1, using 20mm graded stone aggregates, as in kerb or side of path and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6, type C-2 using 40 mm graded stone aggregate as in plinth protection complete all as specified and directed.

M & L for precast cement concrete with type B-1 1:2:4 (20 mm graded stone aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks, string courses, copings etc. with plain fair faces, including chamfers, weatherings, throating etc. and setting in Cement Mortor 1:6 complete all as specified and directed.

Demolition of cement concrete unreinforced in ground floor and paving exceeding 15 cm thick (below or above G.L) complete all as specified and directed.

Removal of demolished Concrete of any description and in any position not otherwise specifically provided for incld disposal of rubbish above 1.5 Km and not exceeding 5 KM complete all as specified and directed.

M & L for Flexural Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre exceeding 25cm thick complete all as specified and directed.

M&L for forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30 mm primed and sealed with sealing compound, Grade 'A' for 150 mm thick concrete slab complete all as specified and directed.

M & L for preparation of existing joints by manually/mechanically raking out of depth of 20 to 25mm and width of joints 10mm to 15mm, clearing the joints with coir brushes and removing all the fine particles, clearing to concerete surfaces and joints with the help nof air compressor and removing away the existing sealing compound and all other loose materials to a distance exceeding 100M but not exceeding 250 M as directed and including providing a back rod/de-bonding strip (thickness 10 to 12mm) applying primer to joint with light pressure and filling the joints with polyurathane base sealing compound (pitch free) ISI marked including fixing masking taped to prevent edges of joints becoming dirty due to spillage of sealant complete all as specified and directed.

M & L for rolled mild steel roof trusses (framed), trussed purlins, rails and fastenings and heavy bracket framing, confirming to Fe 410 - W including distance pieces, cleats, etc. complete all as specified and directed.

M & L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to FE 410-W ( Gde-E-250) complete all as specified and directed.

S & F MS screw bolts of dia 11-15 mm ( machine made ) with hexagonal or square at one end and screwed with other end or screwed both ends length of bolt n exceeding 5cm long complete all as specified and directed.

S & F 2 mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L -type or J-type cranked hook bolt and washer in roof, wall etc complete all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.60 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. Note : Earthing strip removed for repair of roof sheet will be fixed after repair of roof. The rate of this is deemed to included in quoted rate.

Fixing only old sheets (including repairing the old one) Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet any thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

S & F 0.80 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, with grade of zinc coating 275 fixed with L- type or J- type cranked hook bolts and washers, in roofs, walls etc. complete all as specified and directed.

Fixing only 0.80 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, with grade of zinc coating 275 fixed with L- type or J- type cranked hook bolts and washers, in roofs, walls etc complete all as specified and directed.

S & F 0.80 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

M & L for preparation of new steel surface of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for preparation of new steel surface of any description over 10cm in width or girth and applying two coats of aluminium paint over a coat red oxide primer complete all as specified and directed.

M & L for preparation of old steel surface of any description over 10cm in width or girth and applying two coats of aluminium paint including complete removal of existing paint complete all as specified and directed

M & L for preparation of old steel surface of any description over 10cm in width or girth and applying one coat of aluminium paint complete all as specified and directed.

M & L for preparation by complete removal of existing paint of old steel surface of any description over 10cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M & L for preparation of old steel surface of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation of old wooden surface of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking down cement plaster of any description, including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on fair face of brick work or concrete surfaces of wall to receive tiles complete all as specified and directed

M&L for two coats oil bound distemper over one coat on primer on new plastered surfaces of wall including preparation etc complete all as specified and directed.

M&L for one coat oil bound distemper on old plastered surfaces of wall including preparation of surface etc complete all as specified and directed.

Demolition of brick work built in Cement Mortar of any description complete all as specified and directed.

M & L for brick work with fly ash bricks of old size straight or curved on plan exceeding 6 m mean radius built in CM (1:6) complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) of any thickness, including cover fillets complete all as specified and directed.

M&L for Gypsum ceiling board for false ceiling prepainted , perforated finish of size 600x600x9 mm thick of approved brand/make , laid over and including grid work of size 605x605 mm , made out of 0.50 mm thick GI tee of size 32x24 mm for main, 25x24 mm size for cross tee and 24x24 mm angle fixed on wall , powder coated finish on exposed faces of tee and angle, hung from ceiling by using 2 mm dia GI suspension wires fixed with adjustable clip spaced at 1200mm on main runners including making niches for fans/light complete all as specified and directed

M&L for writing letters or figures (Block. Roman, Italic or Indian) not exceeding 30 cm high by using synthetic enamel paint of desired coat complete all as specified and directed.

M&L for writing letters or figures (Block. Roman, Italic or Indian) exceeding 30 cm high by using weather coat paint of desired coat complete all as specified and directed.

M&L for painting existing logos and signs by using synthetic enamel paint of two coats complete all as specified and directed.

M&L for making arrangement in Aluminium section for opening in partition not exceeding 0.5 Sqm with and including providing frame for glass and fixing hinges complete all as specified and directed.

M&L for oiling Greasing of hanger sliding doors complete at bottom and top making serviceable complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement motor bedding (But not backing), removing serviceable tiles to stone and rubbish off the premises complete all as specified and directed.

M&L for glazed colored ceramic tiles on vertical surface 350 X 450 X 6-7 mm thick,over 10mm thick rendering in cement mortar 1:3. Set and jointed in neat cement slurry and pointed in whire or coloured cement to match, complete all as specified and directed

M & L for coloured non skid ceramic tiles 6-7 mm thick (square/rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc. set and and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer of cement mortar (1:6) finished even and rough to receive the top layer complete all as specified and directed.

M & L for coloured non skid ceramic tiles 7-8 mm thick (square/rectangular), area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc. set and and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer of cement mortar (1:6) finished even and rough to receive the top layer complete all as specified and directed.

M&L for light shade Vitrified ceramic tiles 9-10 mm thick (Sqr/ rectangular) Polished, area of each tiles not exceeding 0.36sqm, in floors etc. set and jointed in neat cement slurry over a bedding layer of screed bed 15 mm thick iln CM 1:6 in floor and skirting and pointed in white/colour cement to match complete all as specified and directed.

Taking up or down 15 mm bore GI tubing pipe and connections, including removal to store, complete all as specified and directed.

Taking up or down 20 mm bore GI tubing pipe and connections, including removal to store, complete all as specified and directed.

S&F 15 mm dia bore galvanized steel tubing medium grade with all fittings and fixed to walls, ceiling, floors etc complete all as specified and directed.

S&F 20 mm dia bore galvanized steel tubing medium grade with all fittings and fixed to walls, ceiling, floors etc complete all as specified and directed.

S&F in repair 15 mm stop valve with fancy type chromium plated with long shank and cup (concealed), high pressure, with crutch butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair 15 mm Pillar taps, fancy type with capstan heads, chromium plated, screwed down high pressure, with or without letterer 'Hot' or 'Cold' with long screwed shank and flynuts, screwed for iron pipe and fixed complete all as specified and directed.

S& F in repair vitreous china white wash hand basin flat back size of 550x400mm including brackets including cutting, pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S & F in repair waste coupling of PTMT 32-40mm dia (half or full threaded) (minimum weight -45 gms) complete all as specified and directed.

S & F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 No.) (Thickness or powder coating not less than 50 micron) complete all as specified and directed.

S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket complete all as specified and directed.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required including craking, bending spirally for bed for in Item 04028, waterplates, kerbs not provided copings, kneelers, apex stonesrailings upto 60 cm in height hooping for columns,hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips quality conforming to IS complete all as specified and directed.

M & L for precast cement concrete 1:2:4, type B1 (Using 20 mm graded graded stone aggregate) in cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

M & L for glossy Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments over Screed bed or bedding layer of mortar 15 mm thick in CM 1: 4 for laying floor finishesall complete all as specified and directed.

M&L 75mm thick cement concrete type D-2, 1:4:8 (40mm graded stone aggregate) as in sub base of floors complete all as specified and directed.

S & F Steel rolling shutters with thickness of laths 1.00 mm , with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated,but gear operated type with chain wheel and hand chain complete all as specified and directed.

S & F in repair Ball bearing for rolling shutters complete all as specified and directed.

S & F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

M&L for repair to Aluminium door/window upto 2.00 Sqm size, resecuring/refixing adjusting by fixing flat Aluminium pieces to hold in position if required any small parts required to be fixed in position deemed to be included in the rate complete all as specified and directed.

Taking down chowkhat with shutter( without taking down shutters from the frame) not exceeding 1.5 sqm complete all as specified and directed.

Taking down chowkhat with shutter( without taking down shutters from the frame) exceeding 1.5 sqm but not exceeding 4 Sqm complete all as specified and directed.

S & F in repairs Aluminium extruded section body door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851-1000 mm in width & weight between 61 to 80 Kg complete all as specified and directed.

M & L in replacement of double action door spring hydraulically regulated made up of 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

Taking down carefully copper/aluminium point wiring any type ,surface/concealed/ PVC capping or tubing ( including light,fan,s/socket, or power)complete including fixtures and fittings such as switches,ceiling rose,pendents,regulators,sockets etc complete all as specified and directed.

Taking down old unserviceable main switch board, DB of any type and capacity from its location with accessories MCCB's/MCB SP/SPN/TPN complete all as specified and directed.

Taking down old unserviceable tube light/CFL light/recessed mounted light or any type of light fittings complete all as specified and directed.

Taking down old unserviceable exhaust fan//wall mounted fan of any capacity and size complete all as specified and directed.

Taking down old unserviceable Sub Main wiring of any type any capacity including conduits from its location & making good of distrube surface complete all as specified and directed.

Taking down old unserviceable surface mounting fixed cable of size 3.5 core16/35/50/70 sqmm or any capacity complete all as specified and directed

M &L for PVC concealed conduit point wiring with 1.5 square mm nominal area stranded copper conductor PVC insulated single core cable1100 Volts grade conforming to IS694 Part-I draw in 20 mm dia PVC conduit in concealed including 1100 volts grade 1.5square mm copper stranded single core cable green color PVC insulated for continuous earthing wire with complete chess cutting ,S/F of 20 mm dia PVC conduit with fitting such as elbow,bends,couplers,tee, sucken boxes pressed steel box mounting fitting/junction boxes etc covered the conduit with cement mortor after drawing of electric cables and making good of distrubed surfaces and match with existing shade of wall/roof all complete all as specified and directed for the following:-

(a) One light point controlled by one switch

(b) One Ceiling Fan/Exhaust Fan/Wall mounted fan controlled by one switch

(c) One three pin 5 Amps switch socket outlet on independent board

(d) One three pin 5 Amps switch socket outlet on same board

M &L for PVC casing capping surface point wiring with 1.5 square mm nominal area stranded copper conductor PVC insulated single core cable1100 Volts grade conforming to IS694 Part-I including 1100 volts grade 1.5 square mm copper stranded single core cable green color PVC insulated for continuous earthing wire with fitting such as elbow,bends,couplers,tee, sucken boxes pressed steel box mounting fitting/junction boxes etc and making good of distrubed surfaces and match with existing shade of wall/roof complete all as specified and directed for the following:-

(a) One light point controlled by one switch

(b) One Ceiling Fan/Exhaust Fan/Wall mounted fan controlled by one switch

(b) One three pin 5 Amps switch socket outlet on independent board

(d) One three pin 5 Amps switch socket outlet on same board

All as per item No 77 Above but point wiring with 2.5 sqmm multistrandard copper cable for 5 Pin 15 Amp switch socket combination on Independent board with one run of 2.5 sq mm multistranded copper cable green colour for earth continuity conductor complete all as specified and directed.

All as per item No 77 Above but point wiring with 2.5 sqmm multistrandard copper cable for 5 Pin 15 Amp switch socket combination on Independent board with one run of 2.5 sq mm multistranded copper cable green colour for earth continuity conductor complete all as specified and directed.

All as per item No 78 Above but point wiring with 4 sqmm multistrandard copper cable for 5 Pin 15 Amp switch socket combination on Independent board with one run of 4 sq mm multistranded copper cable green colour for earth continuity conductor complete all as specified and directed.

S&F semi grouting industrial socket & plug powder coated made of CRCA sheet complete box comprised with MCB, SP 32 AMP 12 KAMP reputuring cap complete all as specified and directed.

S&F switch piano, flush type single pole,5 Amps, 240 Volts AC complete all as specified and directed.

S&F ceiling rose surface backlite, 65x50mm, three terminals, 5 Amps,240 Volts AC complete all as specified and directed.

S&F switch socket combination 5 Pin,5 Amps,240 Volts, flush type complete all as specified and directed.

S&F switch socket combination 2 IN 1, 3 PIN, 5 Amps and 15 Amps flush type universal ,240 Volts, complete all as specified and directed.

S & F 36 Watt Recessed LED perforated Single Window modern Designed enabled by advanced LFD light.it blandes into celing plane & maintain Uniform luminance across aperature to enhance visual comfort ceiling tile provided with a drop down acrylic diffser suitable for 600X600 MM ceiling incluiding extra frame for fixing at POP/ Gysum Ceiling mounted version including LED light complete. The 36W system shall be operating at 220-240v AC supply having internal driver. Individual LED's should not be visible for glare free output, and connection up to tube light fitting with connecting up with copper 3 core flexible cord of minimum 1.5 Sqmm size and testing complete, including taking down old unserviceable fitting all as specified and as directed. Make : CG LCTLRP-36-FO-CDL equivalent in Havells , Wipro.

Supply and fix LED tube light fitting capacity 20 watt fixed on wall/surface / ceiling with all accessories tube,driver,with surge protector complete rewired with multistranded copper cable & connecting to ceiling rose with 3 core ,multistranded flexible copper cable complete all as specified and directed Make CG Cat No-CCS-100-20-65-HL2-DP-NWH/Havells/philips/Bajaj.

Refixing of cable any size any capacity upto 70sqmm fixed on wall/trench with clamps & saddle properly retrieved from item no 76 complete all as specified and directed.

S & F , laying concealed sub main wiring with two single core cable of 6 sqmm PVC insulated , 1100 volt grade as per IS 694, with multistranded copper conductor in and including rigid PVC conduit (ISI Marked) including earthing wire of pvc insulated stranded 6 sq mm cable ,chess cutting including provision of 20 mm dia PVC conduit with fittings such as elbow,bends,couplers,tee, sucken boxes pressed steel box mounting fitting /junction boxes etc covered the conduit with cement mortor after drawing of electric cables and making good of distrubed surfaces and match with existing shade of wall/roof complete all as specified and directed.

S & F , laying concealed sub main wiring with two single core cable of 10 sqmm PVC insulated , 1100 volt grade as per IS 694, with multistranded copper conductor in and including rigid PVC conduit of 20 mm dia (ISI Marked) including earthing wire of pvc insulated stranded 10 sq mm cable ,chess cutting including fittings such as elbow,bends, couplers,tee, sucken boxes pressed steel box mounting fitting/junction boxes etc covered the conduit with cement mortor after drawing of electric cables and making good of distrubed surfaces and match with existing shade of wall/roof complete all as specified and directed.

Supply and fix, connecting and testing factory made, MCB distribution board (MCB DB), IP 38, TPN, 8 way, 415 Volts, double door, flush type made out of 1.2mm thick CRCA sheet metal, Phosphatised, duly powder coated and conforming to IS 13032 with 200 Amps rated bus bar, neutral link, earth bar and din rail etc. complete fixed in switch board/ wall complete all as specified and directed. Note: MCBs shall be measured and paid separately.

S&F sheet metal enclosure SPN DB 8 way 240 Volt with Bus bar semi conceled type with necessary connection complete all as specified and directed. Make and model no. L&T, legrand,Havells,Indoasian.

Supply and fix, connecting and testing factory made, MCB distribution board (MCB DB), IP 38, SPN, 4 way, 415 Volts, double door, flush type made out of 1.2mm thick CRCA sheet metal, Phosphatised, duly powder coated and conforming to IS 13032 with 200 Amps rated bus bar, neutral link, earth bar and din rail etc. complete fixed in switch board/ wall complete all as specified and directed. Note: MCBs shall be measured and paid separately.

S&F MCBs SP 6 to 32 Amp 240 Volts 10KA B curve with necessary connection in DB box complete all as specified and directed

S&F MCBs SPN 32 Amp 240 Volts 10KA C curve with necessary connection in DB box complete all as specified and directed

S&F MCBs SPN 40 Amp 240 Volts 10KA C curve with necessary connection in DB box complete all as specified and directed

S&F MCBs TPN 63 Amp 240 Volts 10KA C curve with necessary connection in DB box complete all as specified and directed

Refixing of Exhaust fan/wall mounted fan any type any make any capacity at new location retrieved from item no 33 complete all as specified and directed .

M and L for disconnecting outer & inner unit of Air-conditioning icluding Voltage stablizer unit of any capacity including cutting of copper tubes including shifting of outer unit from roof of the building with provision of angle iron anchor pickets made out of 25mmX25mmX5mm angle iron with suitable size of MS plate with installation of outer & inner unit of AC with the suitable space for further maintenance including necessary gas charging / topping up R-22 /R32/410C with soldering of copper tubes all as specified and directed.

Supply and laying & testing and commisioning LT underground cable 35 Sqmm x 3.5 core 1100 volts grade, XLPE insulated and PVC sheathed heavy duty armoured with multi staranded aluminium conductor laid in pipes, trenches/ducts, on poles etc of the under mentioned type and sizes complete all as specified and directed

Supply and laying & testing and commisioning LT underground cable 16 Sqmm x 4 core 1100 volts grade, XLPE insulated and PVC sheathed heavy duty armoured with multi staranded aluminium conductor laid in pipes, trenches/ducts, on poles etc of the under mentioned type and sizes complete all as specified and directed

Rehal Construction (BID ID -3136138)

S R BUILDERS (BID ID -3128168)