Improvement works in SEs Office building by providing Ventilator and Administrative section record room cupboard works at SE PEDC Perambalurs Office building at Perambalur

Amount

Dismantling the existing Brick masonry, and disposing the debries 1 Km away from the site including cost of all labour charges , lead, lift, T&Ps etc., complete and as directed by the Engineer inchatge of the work .

Plastering with C.M 1:5 12mm thick including cost of cement all materials labour, lead, lift, curing, T&Ps etc., complete and as directed by the Engineer incharge of the work.

White washing Two coats with white cement including cost of all materials, labour, lead, lift etc complete and as directed by the Engineer incharge of the work.

Colour washing the exterior wall two coats of exterior emulsion having quality over a coat of matching wall primer after thorough scrapping and cleaning the surface including the cost of all materials,stainer labour, lead, lift, T&P etc., complete and as directed by the Engineer incharge.

Supplying and fixing of 450mm (18") sweep heavy duty AC Exhaust fan with MS/Fibre louvers shutters arrangements of approved ISI quality complete with necessary wall opening and making good of the wall including cost of all materials, lead,lift, T&Ps, etc complete and as directed by the Engineer incharge of the work.

Providing Cup-board Shutteropen type or sliding with frame using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers and 5mm thick transferant acrylic sheet fixing work. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on work.

Providing two legged scaffolding for chipping and plastering, painting of pipe using 13 cm dia casuarina props, distance between two rows being 1.25m and spacing of posts being 2m in both rows, with two horizontal posts with 0.50m overlap on either side and braces at 2m c/c including longitudinal and transverse middle braces to step up and providing a platform with C.W.Planks of 40mm thick and 1m width etc., including cost of all materials, labour charges, lead, lift, T&Ps, etc., complete using coir and nails and as directed by the Engineer incharge of the work.

YAMINEE ELECTRICAL PROJECTS PRIVATE LIMITED (BID ID -1223781)