Repair/Replacement to roof sheeting, trusses, false ceiling, wooden/steel, aluminium and PVC joinery and certain B/R works in domestic area at AFS Amla

Amount

Dismantling of Asbestos cement (corrugated or semi corrugated) sheets as in roof covering complete

Fixing only 6mm thick asbestos cement corrugated or semi corrugated sheets in roofs, walls etc fixed with `L' type or `J' type or cranked hook bolts complete all as specified and as directed.

M&L 6mm thick asbestos cement,corrugated or semi-corrugated sheet in roof,walls etc fixed with `L' type or `J' type or cranked hook bolts complete all as specified and as directed Make: Charminar / Everest

M&L for 6mm thick asbestos cement two piece, adjustable serrated ridge for corrugated sheets in roofs, walls etc fixed with `L' type or `J' type or cranked hook bolts complete all as specified and as directed Make: Charminar / Everest

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

S/F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of an colour having tensile strength 550 Mpa as in roof covering /cladding to wall /roof covering fixed with self tapping screw as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Dismantling of wall,display board /ceiling board fibre ,pulp,insulation etc or insulation board /slab/wool of any thickness including cover fillets

Providing & fixing false ceiling of module size of 595 x 595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections consisting of main "T" runner with suitably spaced joints to get required length and of size 24 x 38 mm made from 0.27mm thick GI sheet, spaced at 1200 mm center to center and cross "T" of size 24 x 32 mm made of 0.27 mm thick sheet, 1200 mm long spaced between main "T" at 600 mm and center to center form a grid of 1200 x 600 mm and secondry cross "T" of length 60 mm and size 24 x 26 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200 x 600 mm panel to form grid of 600 x 600 mm and wall angle of size 19 x 19 x 0.35 mm and laying false ceiling tiles of approved texture in the grid .Main "T" runners to be suspended from ceiling using 2mm dia GI hanger including 4mm thick non asbestos fibre cement building boards fixed in ceiling flat or sloping to Aluminum frame work with screws complete all as specified and directed.

M&L for 18/19mm thick prelaminated particle board exterior grade, prelaminated one side with decorative choice lamination & other side balancing with lamination fixed with screws to timber frame work in kitchen cabinet, wall hung type complete all as specified and directed.

M&L for 12mm thick prelaminated particle board exterior grade, prelaminated one side with decorative choice lamination & other side balancing with lamination fixed with screws to timber frame work in kitchen cabinet, wall hung type complete all as specified and directed.

Taking down PVC chowkats or frames with shutters not exceeding 1.5 Sqm each (without taking off shutter from the frame) complete all as directed.

Taking down wooden chowkats or frames with shutters not exceeding 1.5 Sqm each (without taking off shutter from the frame) complete all as directed.

Taking down Steel chowkats or frames with shutters not exceeding 1.5 Sqm each (without taking off shutter from the frame) complete all as directed.

Taking down wooden chowkats or frames with shutters exceeding 1.5 Sqm and not exceeding 4.0 Sqm each (without taking off shutter from the frame) complete all as directed.

Taking down steel chowkats or frames with shutters exceeding 1.5 Sqm and not exceeding 4.0 Sqm each (without taking off shutter from the frame) complete all as directed.

Taking down shutters of any description not exceeding 1 Sqm each complete all as directed.

Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 sqm each complete all as directed.

S&F Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified,

S&F Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified,

S & F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side all as specified and directed

S & F 35mm thick 2nd class hardwood glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc, but divided in to square with plain, chamfered or rounded, mitred and rebated sash bar, any number fitted with cut and mitred beads for securing glass etc, size of member of shutter as specified in SSR Part-I section 8 cluase 8.20 (a) supplied and fitted to chowkats complete.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F steel window with side hung shutters incl box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded

All as per item no 11 above but without glazing bars.

S & F steel ventilator with top hung shutters incl hinges with steel peg stay, complete

S&F Second class hard wood, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed

S&F 30mm thick second class hardwood, Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats

S&F 25mm thick second class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc.but divided into squares, with plain, chamfered or roun?ded, mitred and rebated sash bars, any numbers edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

S&F 100mm Butt hinges, heavy weight, cold rolled mild steel, and fixed

Ditto all as per item No. 31 but 75mm long

S& F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21

S& F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified (SI marked)

Ditto all as per item No. 34 but 100mm long

S&F 150mm long size extruded aluminium alloy handles, cast type anodised complete as specified (ISI Marked).

Ditto all as per item No. 36 but 100mm long

S&F 300mm long aluminum alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fix complete all as specified and directed.

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane including hacking out broken glass pane complete all as specified

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all as specified.

S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F second class hard wood small fittings such as shaped door and window stops, brackets of any type, latches, hings blocks and the lile, articles not exceeding 200 cucm complete all as directed.

S&F 3mm thick figured glass, pin headed type and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as specified

Taken down and refixing in same opening ,shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each complte all as directed.

Taken down and refixing in same opening ,shutters of any description not exceeding 1 Sqm each complte all as directed.

S & F 25mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side all as specified and directed

S&F 125mm size hasp and staple, safety type of aluminium anodised with mild steel hinge pin including bolt hinge plate fixed with screws all as specified.

M&L preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specifed and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

M & L for rolled mild steel angles conforming to Fe 410-w (Gde-E-250) quality A, of size 40x40x6mm as in frame work for door frame including flat iron hold fasts, all cutting, welding, finishing, etc., complete all as specified and directed.

S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

Preparation new painted steel surfaces of any description over 10cm width or grith not otherwise described and applying two coat of synthetic enamel paint over one coat of red oxide and zinc chrome complete all as specified and as directed

Cutting holes in brick walls built in cement mortar for inserting hold fast and making good dismantled portion in cement concrete 1:2:4 type B-1, depth exceeding half brick but n. exc one brick complete all as specified

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and as directed.

M&L for brickwork with fly ash ,subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 all as specified and as directed.

Taking down, cement plaster of any description from brick or stone walls etc, including raking out joints, hacking for key scrubbing down with water etc and disposing of the rubbish materials in low lying areas of defence land all as specified and as directed.

M&L 15mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:6 finished fair and even without using extra cement complete all as specified and as directed.

M&L two coats of oil emulsion distemper on wall newly plasterd surfaces over a coat of chalk white primer complete including prepatation of new surfaces complete all as specified and directed.

S&F door closer hydraulically regulated designation No.2 universal type,suitable for door shutters of 701 to 850 mm width and of wt 36 to 60 kg. Aluminium(Die cast)

S&F 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete.

S&F in Repair Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge etc., complete all as specified.

S &F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor,Overall length of cover plate 150mm

S&F 4 lever aluminium mortice lock ,vertical type size 100

S&F in repairs Aluminium Fanlight pivot with plate size 25mmx 65 mm and suitable for shutter of 30mm thickness and fixed

M&L for welding in repair exc 2.5cm but n exc 5cm in length, thickness of metal n. exc 6 mm

S&F mild sdteel Casement stays, size 300mm, with hinged joint and two plates with studs complete fixed to steel sashes, including drilling necessary holes or welding

S&F mild steel handles 150mm long suitable for steel windows

Note:- The amount against the Schedule of Credit mentioned in the tender document shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance.

Raj Construction

chronicle enterprises

M/s Vinod Yadav

Vee kay construction