GE/863/EWS-T-31 OF 2024-25

Amount

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil, complete all as specified and directed.

M & L for Cement concrete type D2 1:4:8 using 40mm graded stone aggregate as in foundations, filling and mass concrete, complete all as specified and directed by Engr-in-charge.

M & L for Pre-cast cement concrete type C1 (using 20 mm well graded aggregates) 1:3:6 block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.

M & L for 40 mm thick plain cement concrete 1:2:4 B-0 Nominal Mix (using 12.5 mm graded stone aggregate) as in damp proof course (DPC) to horizontal or vertical surfaces including necessary form work and mixing of water proofing compound as per manufacturer’s instructions complete all as specified and directed. NOTE: - Water proofing compound will be measured and paid separately as supply only.

M&L for Hard core of gauge n exc 63mm thick of broken boulder, spreading, leveling, watering & ramming to true surface complete all as specified and directed by Engr-in-Charge.

M&L for 75mm thick P.C.C 1:4:8 type D-2 (using 40 mm well graded aggregates) as in sub base of floor complete all as specified and directed by Engr-in-Charge.

M & L for 25 mm thick PCC 1:2:4 type B1, 20 mm graded stone aggregates as in flooring including finishing cement concrete rough surface with out using extra cement complete all as specified and directed by Engr-in-Charge.

M & L for non skid coloured ceramic tiles 7 to 8mm thick square / rectangular area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floor laid over and including 15 mm thick screed bed in CM 1:6 as in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surface of tiles complete all as specified and directed by Engr-in-charge.

M & L for Glazed ceramic coloured tiles of size 300 mm X 200 mm X 7 mm thick as on vertical surfaces such as skirting, dados and rises to steps etc. over and including 10mm thick rendering as a backing coat in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles complete all as specified and directed by Engr-in-charge.

M & L for 10 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finishing the surface even and smoth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces and finishing the surface even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

Supply only Integral water proofing compound (WPC) of approved make complete all as specified and directed.

M & L for preparation of newly plastered or un-plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M & L for preparing newly plastered or previously untreated walls surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each excavated soft/loose soil in trenches after the pipes have been laid and tested competed all as specified and directed.

Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed by Engr-in-Charge

M&L 75mm thick PCC 1:3:6 Type C-1 using 20mm crushed stone aggregate as in plinth protection, laid to a slope of 1 in 12 in a manner that top face shall conform to the finished level of PCC adjacent to the edging. PCC shall be laid in alternate bays (not exc. 2.5 meters length) and finished even and smooth without using extra cement. 6 mm wide joints shall be provided throughout the thickness of plinth protection in concrete bays at corners and turning points and also in between walling and plinth protection. All joints in bays, as well as between walling and the concrete in plinth protection shall be filled in with mastic filling comprising 1 part of heated bitumen 85/25 grade and 3 parts of sand (all by weight) complete all as specified and directed.

M & L for precast reinforced cement concrete type B-1 Nominal Mix (1:2:4) (using 20 mm graded stone aggregate), as in lintels upto 1.5 m clear span, cills, steps,seismic and other similar bands, plinth course, string courses, lacinng courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

M & L for providing pre-cast reinforced cement concrete as in landing, cover slabs (for man holes etc), chullah hoods, chajjas, water troughs, mangers, shelves and similar items with plain faces in cement concrete 1:2:4 type B-1, using 20 mm graded stone aggregate and setting in cement mortar 1:6 complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, bands, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed.

S & F II class hard wood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamferred, put together with glue pinned at joints. complete all as specified and directed by Engr In Charge.

S & F II class hard wood Plain, framed, pannelled shutters 35 mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers etc complete as specified and directed by Engr-in-charge.

S&F butt hinges, medium weight, cold rolled mild steel, size 100mm, complete all as specified and directed.

S&F MS sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, 250mm length complete all as specified and directed by Engr In Charge.

S&F 150mm barrel tower bolts, stove enamelled black, with bright bolt complete all as specified and directed by Engr In Charge.

S&F MS pressed handles, oval type, stove enamelled black size of 125mm, complete all as specified and directed.

Material & labour for two coats of synthetic enamelled paint over a coat of pink primer on new wooden surfaces exc 10cm width or girth including preparation of new or untreated surfaces complete all as specified and directed by Engr In Charge.

S & F 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 120 gm/sqm, fixed with L-type or J-type or cranked hook bolts in lieu of screws complete all as specified and directed by Engr In Charge.

Material & labour for two coats of synthetic enamelled paint over a coat of red oxide on new steel surfaces exc 10cm width or girth including preparation of new or untreated surfaces complete all as specified and directed by Engr In Charge.

M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing of Fe 410W (Gde-E-250) etc (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed.

S&F for Rotational moulded polythylene water storage tanks of capacity 500ltr tripple layered (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, complete all as specified and directed.

S&F 20mm bore float ball valve high pressure of PTMT with epoxy coated alluminum rod and high density plastic ball screwed for iron pipe and fixed ( Minimum wt 15 mm - 142 gms/20 mm - 210 gms), complete all as specified and directed.

S&F for 15 mm bore pipe, Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr In Charge.

S&F for 20 mm bore pipe, Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr In Charge.

S&F 15mm bore Galvanised steel tubes, 'medium grade' with all fittings and fixed complete to walls / ceilings or laid in floors complete all as specified and directed by Engr In Charge.

S&F 20mm bore Galvanised steel tubes, 'medium grade' with all fittings and fixed complete to walls / ceilings or laid in floors complete all as specified and directed by Engr In Charge.

S & F Vitreous China , Semi pedestal pattern (Anglo Indian-type), white and fixed with fixing bolts (including fixing of seat cover, flushing cistern and flushing pipe), complete all as specified and directed by Engr-in-charge.

Supply only plastic water closet seat cover, white, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device complete all as specified and directed .

S&F for Wash Hand basins, Vitreous China, white, flat back, size 550x440mm, including cutting for and pinning in ends of brackets or erecting stand, angle bracket (but exclusive of fixing of supply, waste pipe, taps) complete all as specified and directed.

Supply only PVC valveless, syphonic action type, 10 ltr flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, including flush pipe of CP brass tube, 32 mm dia, for low level cistern and connecting to the WC and making good to the floor with PCC all as specified and directed.

S&F bib taps, cast copper alloy with crutch or butterfly handle, fancy type chromium plated, screwed down, screwed for 15 mm bore dia of iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr In Charge.

S&F Angle stop valve of PTMT any colour high pressure screwed for 15 mm bore dia of iron pipe and fixed (15mm minimum weight 90 Gms), complete all as specified and directed.

Supply & fixing of pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed for bore dia of pipe 15mm complete all as specified and directed by Engr In Charge..

S&F Waste coupling of PTMT for 32 mm bore dia of discharge pipe (half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms) including low density polyethylene (LDPE) discharge pipe of 32mm bore of pressure rating 6 kgf/sq.cm, complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and directed.

M&L Cast iron floor trap for 75mm diameter of outlet with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as specified and directed.

M&L Salt-glazed stoneware (SGSW) gully traps, square or round mouthed, type 'P' of size 180x100mm, including setting and jointing to drain pipes with cement mortar 1:1, complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in tenches or in floors, complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in tenches or in floors, complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends any radius, complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends any radius, complete all as specified and directed.

S&F 110 mm bore PVC (SWR) junction single (Single 'T') equal or unequal, complete all as specified and directed.

S&F PVC (SWR) 110 mm bore vent cowl, complete all as specified and directed.

S&F soap dish vitreous china white, approximate size 160x160x90mm embedded in the wall, complete all as specified and directed.

S&F of 20 mm dia Aluminum anodised tubular towel rail including one pair of fixing brackets complete all as specified and directed.

S&F toilet paper holder, vitreous china box type, fixed to wall with chromium plated brass screws complete all as specified and directed.

S & F for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm bore dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed.

M&L for 150mm internal diameter of SGSW drain pipe and including cement concrete 1:4:8 type D-2, (using 40mm graded stone aggregate) bed to drain pipes incl packing under, and haunching against the sides of the pipes after they are laid in trenches, jointed and tested complete all as specified and directed by Engr-in-charge. Note:- Excavation and earthwork shall be measured and paid separately.

M&L for point wiring using approved colour coding as per IS 1.5 Sqmm multistranded, 1100 volt grade copper conductor cable of PVC insulated and unsheathed type alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continuous earthing in & incl PVC Casing and caping with accessories having ISI mark fixed on wall surfaces / ceiling including provision PVC Box on top for fixing switches, sockets etc. all as specified for one light point/ fan /Bell point controlled by one switch complete all as specified and directed by Engineer-in-Charge.

All as per Sri item No 63 here-in-before but for one 3 pin socket outlet 15 Amp, independent board with cable 2.5 sqmm including provision of 1.5 sqmm single core multistanded PVC insulated copper conductor as earth conducting conductor complete all as per specified and directed by Engineer-in-Charge.

Supply and fixing of switch piano type 15 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of socket outlet 3 pin 15 Amp 2-in-one 230 Volt flush type complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of switch piano type 5 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer-in-Charge.

M&L Ceiling rose, 3 terminal with ISI mark complete all as specified and directed by Engr-In-Charge.

Supply and fixing surface & wall mounted LED 20W tube light fitting 4 feet, mirror light slim type with extruded aluminum housing alongwith 20W LED lamp PC body with all acessories complete all as specified and directed by Engg-in-Charge.

Supply and fixing surface & wall mounted LED 5W tube light fitting batten, mirrorlite slim type with extruded aluminum housing alongwith 5W LED lamp PC body with all acessories complete all as specified and directed by Engg-in-Charge.

Material and labour for lamp holder, PVC/ Polycarbonate type with back plate complete all as specified and directed.

Supply and fixing of 9 watts LED backup lamp of 4 hours backup, with auto switch on mechanism in case of power failure, works as regular 9w lamp in normal mode and a 4w lamp in backup mode complete all as specified and directed by Engg-in-Charge.

S & F LED light fitting 1X10W bulkhead fitting luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers, complete all as specified and directed.

Supply and fixing of sheet metal enclosure double door for DBs single pole and neutral for 4 way 240 volt complete all as specified and directed by Engineer-in-Charge.

S&F MCB SPN 40 Amp, 10 KA complete all as specified and directed by Engineer-in-Charge.

S&F MCB SP 6 Amp to 32 Amp, 10 KA complete all as specified and directed by Engineer-in-Charge.

Supply, Fixing, and Testing Electric water heater 230 V, single phase, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 star rated complete with all accessories such as multifunctional safety valve, thermostat, NRV, automatic thermal cutout, fusible plug, anti-vacuum system, built-in pressure release valve, rust proof powder coated body, indicator lamps, connection piece etc including provision of grouting bolts in walls, stop cock, pvc connection etc. and all safety advices as per E-in-C's branch technical instructions and making good disturbed surfaces complete all as specified and directed by Engineer-in-charge.

Supply and fixing 1100 Volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire one twin core cable flat or circular of size 16 Sqmm complete all as per specified and directed by Engineer-in-Charge.

M&L for Earthing complete with GI steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to GI earth wire of 4 mm dia protected by GI protection pipe light grade of 40mm bore dia from mechanical injury, 20 mm medium grade for watering with funnel, including test point up to 7.5 meter from earth pit, adequate quantity of common salt, charcoal dust, chemical and connected to test point by means of bolts and nuts washers made out of GI all as shown in Electrical plate No 3 of SSR part I including necessary earthwork and excavation in any type of soil, PCC 1:2:4 type B1 chamber with 40mm thick RCC 1:2:4 type mix cover slab with 6mm dia MS bars at 100mm dia both ways with MS hook 6mm dia MS bars etc. complete all as specified and directed by Engr-in-charge. Note: 1. Suitable quantity of charcoal, common salt, funnel, GI pipe required for watering, pit & CI pit cover etc is deemed to be included in quoted rate and lead wire used beyond 7.5m from pit cover will be measured separately. 2. On testing after completion if the desired resistance is not obtained the earthing shall be re-done at no extra cost.

Taking out/taking down old unserviceable damaged GI/HDPE/PP-R pipe of 25/32/40 mm size from excavated trenches or from wall/floor including removing of fittings complete all as specified and directed by Engr-in-Charge.

Supply, laying and testing 3 layer PP-R polypropylene random copolymer concealed pipes SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water, including all PP-R Plain & brass threaded polypropylene random fitting of size 40mm (outer dia) complete all as specified and directed. Note Excavation and earth work shall be measured and paid separately.

All as per ser item No 82 here in before but of size 32 mm (outer diameter of pipe) complete all as specified and directed.

All as per ser item No 82 here in before but of size 25 mm (outer diameter of pipe) complete all as specified and directed.

Supply and fixing of HDPE Pipes PN 10, Bore size is 63mm for mechanical protection of PPR Pipe line complete all as specified and directed.

Supply & fixing PP-R Ball Valves (brass inserted) suitable for PPR pipe line of size 40mm, complete all as specified and directed.

Supply & fixing PP-R Ball Valves (brass inserted) suitable for PPR pipe line of size 32mm, complete all as specified and directed.

Supply & fixing PP-R Ball Valves (brass inserted) suitable for PPR pipe line of size 25mm, complete all as specified and directed.

Supply and fixing ball brass float valve,high pressure, with polythene float and flynut for 40mm PPR Pipe complete all as specified and directed.

Supply and fixing ball brass float valve,high pressure, with polythene float and flynut for 25mm PPR Pipe complete all as specified and directed.

S&F in replacement PUF insulated cylndrical tank of capacity 1000 Ltr Vertical type double layer duly filled with puf insulation superior quality to resist in temp -30 to +35 degree centigrade alongwith hiknged top lid of same material with locking arrangement and hoisted on platform complete with making pipeline connection with the following specification :- (a) Inner tank will be double layered HDPE food grade material. (b) Outer 4mm thick FRP jointless casing of tank. (c) Thickness of PUF insulation shall be 75mm. (d) Minimum density of PUF insulationshall be 44 kg per/cum+ 10%. complete all as specified and directed by Engr-in-Charge. Note:- Dismantling of old PVC water storage tank along with old ball brass float valve deemed to be included in the rates quoted for this item.

S&F in replacement PUF insulated cylndrical tank of capacity 500 Ltr Vertical type double layer duly filled with puf insulation superior quality to resist in temp -30 to +35 degree centigrade alongwith hiknged top lid of same material with locking arrangement and hoisted on platform complete with making pipeline connection with the following specifications:- (a) Inner tank will be double layered HDPE food grade material. (b) Outer 4mm thick FRP jointless casing of tank. (c) Thickness of PUF insulation shall be 75mm. (d) Minimum density of PUF insulationshall be 44 kg per/cum+ 10%. complete all as specified and directed by Engr-in-Charge. Note:- Dismantling of old PVC water storage tank along with old ball brass float valve deemed to be included in the rates quoted for this item.

Excavation in trenches in soft / loose soil not exceeding 1.5mtr wide and not exceeding 1.5 mtr in depth for laying of pipes in trenches and getting out including levelling of bottom surface and trimming of sides after removal of existing GI/HDPE pipes and fittings complete all as specified and directed. Note:- Rate of removal of existing GI/HDPE/PP-R pipes with fittings is not included in this item.

M&L for Pre-cast cement concrete hollow block masonry type C1 (using 20 mm aggregate) 1:3;6, exc. 10 cm in width and setting in cement mortar 1:6, and including demolition of damaged block masonry complete all as specified and directed by Engr-in-Charge.

M&L for cutting of existing steel tubing of size 40 mm dia for alterations or additions, done in position without taking down, complete, all as specified and directed. Note: Each cut shall be measured.

Schedule of Credit

R B TRADERS (BID ID -3097116)

M/S PYARE LAL (BID ID -3116957)

A P ENTERPRISES (BID ID -3100521)

M/S PAWAN KUMAR NEGI GOVT. CONTRACTOR (BID ID -3102579)