02/BSNL/CD/PY/2022-23(Recall)

Amount

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

In cement mortar

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 50 in foundation and plinth in:

Cement mortar 1:6 (1 cement : 6 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 50 in superstructure above plinth level up to floor V level.

a) Cement mortar 1:4 (1 cement :4 coarse sand)

12 mm cement plaster of mix :

a) Cement mortar 1:4 (1 cement :4 coarse sand)

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead :

a) Cement mortar 1:4 (1 cement :4 coarse sand)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, helves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in small lintels not exceeding 1.5m clear span up to floor five level, including the cost of required centering, shuttering but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone- III) : 3 graded stone aggregate 20 mm nominal size).

Providing and fixing commercial quality ceramic glazed wall tiles (thickness to be specified by the manufacturer), of approved make, in all colours, shades of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying commercial quality Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc.,complete.

Providing and fixing factory made panel PVC door shutter with frames including cutting ,jointing and fixing in position with necessary hinges screws handles sliding door bolt tower bolt etc all complete as per the direction of E-I-C

a)30mm thick plain PVC door shutters

Providing precast cement concrete Jali brought from local manufacturer suitably reinforced with mild steel wire including transportation fixing and finishing in cement mortar etc. complete as per the direction of E-I-C

a) 600mmx450mm size 40 mm thick

White washing with lime to give an even shade :

a) New work (three or more coats)

Providing and laying Vitrified Nano tiles in floor with different sizes (thickness to be specified by the manufacturer), of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) in average 6 mm thickness, including grouting of joints

a) Size of Tile 600x600 mm

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.

a) Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :

a) W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

a)White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :

a) Rectangular shape 453x357 mm

Providing and fixing PTMT stop cock of approved quality and colour.

a)15 mm nominal bore, 86 mm long, weighing not less than 88 gms

Providing and fixing PTMT bib cock of approved quality and colour.

a) 15mm nominal bore, 86 mm long, weighing not less than 88 gms

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall

a) 15 mm nominal outer dia. Pipes.

a) 20 mm nominal outer dia. Pipes.

a) 25 mm nominal outer dia. Pipes.

Dismantling aluminium partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus materials and stacking of serviceable material within 50 meters lead as directed by Engineer-in-charge.

Refixing the ANG partition including alterations in sections, fixing with required rawl plugs and screws or with the fixing clips, expansion hold fasteners including filling up at junctions, all sides, etc as directed by the Engineer-in-charge.(The materials like aluminium sections, glass, particle board and rubber gasket will be supplied departmentally)

Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :

For pipes 100 to 250 mm diameter

Providing and fixing unplasticised Rigid PVC waste water pipes for drainage works including cutting jointing with adhesives etc all complete as per the direction of E-I-C (i)Single socketed pipes.

75 mm diameter

110 mm diameter

Providing and fixing unplasticised Rigid PVC waste water pipes moulded fittings for drainage pipe works including cutting jointing with adhesives etc all complete as per the direction of E-I-C

75 mm diameter

110 mm diameter

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hardwood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.