Janpad Unnao me Rawatpur sthit nirikshan bhawan avam aawasiya colony ke maramat ka karya

Dismantling reinforced cement concrete or reinforced brick work, including stacking of dismentaled materials as directed by the Engineer-in-chargewith in a distance of 50 meters.

Dismantling b/w or stone work in lime or cement mortar and including stacking of dismentaled materials as directed by the Engineer-in-chargewith in a distance of 50 meters.

Dismantling door and windows.chowkhats with hold fast and including stacking of dismentaled materials as directed by the Engineer-in-chargewith in a distance of 50 meters.

Dismantling existing plaster and including stacking of dismentaled materials as directed by the Engineer-in-chargewith in a distance of 50 meters.

E/w in cutting in foundation of masonary Work including lead upto 30 M. And lift upto 1.5 M and disposal and back filling as per direction of engineer-in-charge.

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size, As per DSR2023 ITEM NO-10.11.1

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge. Fixing with adjustable lugs with split end tail to each jamb, As per DSR2023 ITEM NO-10.14.1.1

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with: 4.0 mm thick glass panes, As per DSR2023 ITM NO. 10.30.1

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: Butt hinges and necessary screws shall be paid separately) 9.5.1Second class teak wood , 35 mm thick shutters, As per DSR23 ITEM NO. 9.5.1.1

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete. size 300x16mm, As per DSR23 ITEM NO. 9.96.1