SPL REPAIRS TO GAS SHED AND TRAINING SHED IN TECH AREA AT 1 (I) RO FLT UNDER GE RANCHI

Amount

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for

M&L PCC type D-2 1:4:8 (using 40mm graded stone agg) as in foundation, filling and mass concrete, Complete all as specified and as directed.

M&L 150mm thick PCC type D2, 1:4:8 (using 40mm graded stone agg) as in sub-floor surface complete all as specified and directed

M&L 75mm thick PCC type C-2 1:3:6 (using 40mm graded stone agg) as in plinth protection/Path/floor finishing surface of concrete topping even and fair without using extra cement complete all as specified and directed

M&L PCC type C-2 1:3:6 (using 40mm graded stone agg) as in surface channels and drains.

M&L extra forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra, including forms, moulds, mitred/ stopped end etc.

Demolition of brick wk masonry built in cement mortar incldg all quoins arches pillars etc

M & L Brick wk with sub class ‘B’ bricks straight or curved on plan exc. 6m means radius in CM 1:6, Complete all as specified and as directed.

M & L Mild steel bars 10mm dia TMT Bars and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to

All as item No 9 above but, 6mm to 8mm dia.

M&L 40mm thick cement concrete type B0 1:2:4 (20 mm graded aggreate) as in damp proof course etc similar work complete all as specified and directed

Applying evenly a coat of blown type bitumen at the rate of 1.50 kg per squarw meter and blinding with clean dry sand @ 0.05 cum per sq. m

M & L, 15mm thick rendering on fair faces of brick work/concrete surface in CM (1:4) with applying water proofing compound (As per manufrature instruction) surface finished fair & even complete.(WPC will be paid saperatelly)

Supply only liquid water proofing compound.

M&L applying Two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 ltr/10sqm over and including priming coat of exterior primer applied @ 0.90 ltr/10sqm over a coat of plaster of paris putty of 1mm thickness on new plastered wall surfaces.

M&L PCC 1:3:6 type D-2 using 40 mm graded stone aggregate as in foundation , filling and mass concrete, Complete all as specified and as directed..

M&L broken stone hardcore of gauge n exc. 63mm, deposited, spread and levelled in layer n exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed

Dismantling timber scantling 40 sqcm and over in section in any position in framed work complete all as specified and directed

S&F Steel work in tubular trusses including embeded in concrete with special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete Fe 410-W(Gde E-250) quality-A.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment complete Fe 410-W(Gde E-250) quality-A.

S&F for Roof trusses (framed), trusses, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) incl distance pieces, cleats etc complete Fe 410-W(Gde E-250) quality-A.

S&F Mild steel Flat iron as fillet complete all as specified and directed

M&L, applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of newly steel surfaces of any description over 10cm width or girth not otherwise described.

Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges as in roof covering.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated/ semi - corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering fixed with coach screw as per manufacturers instrution complete all as specified and directed

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering as ridge/cladding to wall, fixed with self tapping screws as specified

M & L PCC 1:2:4 type B-1 using 20 mm graded store aggregate as in coping and channel including use and waste of form work where necessary.

M&L Sand filling under floors or in foundation including watering and consolidation for laying interlocking tiles complete all as specified and directed.

M& L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment in paths and hardstanding laid tightly and joint filled with dry sand(colour and pattern as approved by GE) complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for

M & L RCC (1:2:4) type B-1using 20 mm graded stone aggregate as in beam, cantilevers,bressummers,lintle over 1.5m span etc.

Forming embankments as in under the floor and above to ground level with Moorum/ Red bajri, laid in layer n exc. 15 cm thick spreading in layer, rolled and consolidated as required

M&L 75 mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in flooring and finised the concrete surfaces even and smooth without using extra cement

S&F Mild steel framed work as in posts and struts in fencing including cutting tops to shape as directed, drilled holes,notching for wire etc flats iron fillets (for securing wire mesh etc ) including all necessary drilling, bolting or rivetiing etc, and similar work confirming to Fe-290 GdeE -165.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410-W(Gde E-250) quality-A

M & L for RCC (1:2:4) type B-1using 20 mm graded stone aggregate as in slab supported on wall ,Chajjas,deck slab Shelves/tank staging etc.

Dismantling fencing wire mesh any type

Supply only galvanised iron chain link fencing of size and dia as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire.

S&F mild steel screw bolts (machine made ) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagoanl or sqare nut, n.exc 5cm long of diameter of shanks 11 to 15 mm

M&L, 20mm thick screed bed or bedding layer of mortar in CM (1:6) for lying floor finishes and surface fair and even.

M&L Chequered cement concrete tiles (300x300x25)mm thick, set, jointed and pointed in neat grey cement slurry with grey pigment cement and pigment in floors

jai maavindwashni sales & supply

M/S DILIP KUMAR

M/S ABDHESH CONSTRUCTION

M/S JAI MATA DEE CONTRUCTION CO.

M/S Manoj Kumar Sinha