Repairs to Grain Godown at Pimpalner Tal.Sakri Dist.Dhule

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 metre beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting Etcetera complete. (Lift upto 1.5 metre) By Mechanical Means

Providing soling using 80 milimetre size trap metal in 15 centimetre layer including filling voids with Crushed sand/grit, ramming, watering Etcetera complete.

Providing and laying Cast in situ/Ready Mix cement concrete in Mix-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish Indian Standards to be provided, finishing if required and curing complete, with fully automatic micro processor based Programmable logic controller without Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) Etcetera complete. With fine aggregate (Crushed sand Verticle Shaft Impactor Grade)

Providing and laying Cast in situ/Ready Mix cement concrete in Mix-15 of trap/ granite/quartzite/gneiss metal for steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish Indian Standards to be provided, finishing uneven and honeycombed surface and curing Etcetera complete. The Cement Mortar 1:3 plaster Indian Standards considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin Etcetera (Wooden centering will not be allowed.), with fully automatic micro processor based Programmable logic controller without Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) Etcetera complete. With fine aggregate (Crushed sand Verticle Shaft Impactor Grade)

Providing and fixing in position Thermo Mechanical Treated - FE - 500 bar reinforcement of various diameters for Reinforced Cement Concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches Etcetera as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing second class Burnt Brick masonry with conventional/ Indian Standards type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering Etcetera Complete.

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 milimetre thick in cement mortar 1:4 using waterproofing compound at 1 Kilogram per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 milimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days Etcetera complete.

Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etcetra.

Removing Galvanised Iron or Asbestos cement sheet roofing including purlins, principal rafters Etcetera including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding Etcetera complete.