PROVN OF CERTAIN SPECIAL REPAIR, LBW AND MINOR WORKS UNDER AGE B/R-II AT BB CANTT SRINAGAR

Amount

Taking down cement plaster of any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Taking down shutters of any description n.exc 1 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but n exc 2 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) not exc 1.5 square metre each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 square metre but n.exc 4 square metre each,complete all as specified and directed.

Taking up or down steel tubing and connection, including cleaning for re-fixing or removal to store of size of pipe 15 mm bore laid on floor or wall complete all as specified and directed.

Taking up or down steel tubing and connection, including cleaning for refixing or removal to store of size of pipe 20 mm bore laid on floor or wall complete all as specified and directed.

Dismantling of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles but built in cement mortar complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting ,any gauge, thickness including roof covering etc complete all as specified and directed.

Dismantling of boarding, Ply any description fixed in any position with nails complete all as specified and directed.

Dismantling timber scantlings 40 Sqcm and over in section, in unframed work in any position complete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floor and paving n.exc 15 cm thickness below or above GL complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling of structural steel work in any description complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads, complete all as specified and as directed.

M&L Rendering 15mm thick in cement mortar 1:4 on stone masonary or fair face of brick work, finished even and smooth w/o using extra cement, complete all as specified and as directed.

M&L Rendering 10mm thick on stone masonary or other than fair faces of brick work in CM 1:6 surface finished even and smooth without using extra cement complete all as specified and directed.

M&L Rendering 5mm thick in cement mortar 1:3 on stone masonary or other than fair face of brick work, finished even and smooth w/o using extra cement, complete all as specified and as directed.

M&L Non skid ceramic coloured tiles 7 to 8 mm thick, area of each tile exc 0.06sqm but n exc 0.11 sqm (min. size 300mm x 300mm), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L Non skid ceramic coloured tiles 7 to 8 mm thick, area of each tile exc 0.18sqm but n exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L Glazed ceramic coloured tiles in vertical surfaces 450mm x 300mm x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in Cement mortar 1:4 complete all as specified and directed.

M&L Granite work with 20mm thick slab, table rubbed and polished, in steps, window cills, cooking platforms and like in single piece set in neat cement slurry and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15mm thick screed bed or bedding layer in cement mortor (1:4) complete all as specified and directed.

Moulding on sides of granite slabs 16-18mm thick complete, all as specified and as directed.

Form work to edges of concrete flats, treads, breaks in floors, window cills, floor and roof slabs and shelves, horizontal or sloping and similar work exc 5cm but not exc. 10cm wide complete all as specified and directed.

Form work to soffits of suspended slabs such as floor slab,landings and similar work not exc 200mm thick in rough finish surfaces of concrete complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

All as per Ser item No.27 here in before but 5 to 10mm bars as in stirups spacers and binders complete all as specified and directed.

M&L Reinforced cement concrete, 1:11/2:3, type A-1 (using 20 mm graded stone aggregate) as in slab supported on walls, beams and columns in floor, roofs, landings, balconies, canopies, shelves and like complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in ridges, hip, valley gutter, drip and straight flasing fixed in repair complete all as specified and directed.

M&L 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in sub floor finished rough to receive top layer complete all as specified and directed.

M&L Brick work with sub class B old size bricks straight or curved on plan exc 6 m mean radius built in cm (1:6) complete all as specified and directed.

M&L Brick work with sub class B old size bricks straight or curved on plan any radius in half bricks thick wall built in cement mortar 1:4 complete all as specified and directed.

Racking out joints/pointings to random rubble or polygonal rubble uncoarsed or brought up to courses and Raised pointing to random rubble or polygonal rubble, uncoursed or brought upto course in cement mortar 1:4 complete all as specified and directed.

M&L Second class soft wood 20mm thick wrought surface as in eaves board, ceiling, soffits and weather boarding etc with 30mm butt/lap joints, complete all as specified and as directed.

All as per item ser No 36 above but except boarding

M&L Plywood 6 mm thick, 5 Nos of ply grade BWR, type BB fixed with nails to timber frame-work complete all as specified and directed.

M&L 2nd class soft wood clean sawn timber fixed in scantling complete all as specified and directed.

S&F 2nd class hard wood (Hollock) plain solid straight chowkhats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F 30mm thick 1st class soft wood (Deodar) glazed and skelton shutter open rebated and prepare to receive glass, gauge etc for window/ventilator edges of framing plain, chamfered rounded fitted with cut and mitred beads for securing glass etc, with member size as specified in SSR Part-I clause 8.24(b),complete all as specified and as directed.

S&F 35mm thick factory made plain,framed,panelled shutter of second class hardwood (hollock) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm thick veneered particle board with commercial veneering on both faces, kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tubes for top & bottom rails. M S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joining together with solvent cement, supplying & fixing in the frame at site as per Sketch of SSR Part-II & specification. Make: Rajshree Doors or equivalent as approved by GE

S&F Factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and directed. Make-Rajshree Doors or equivalent as approved by GE

S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm, complete all as specified and as directed.

S&F 4mm thick sheet glass ordinary quality and glazing with beading in square n/exc 0.5 Sqm each pane, complete all as specified and as directed.

S&F 4mm thick figured glass, pin head type and glazing with oil putty or wooden beads in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts of extruded section of size 200mm, and fixed complete all as specified and as directed.

S&F Aluminium, anodised, barrel tower bolts of extruded section of size 100mm, and fixed complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) of size 300mm, and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F 100mm size butt hinges, medium weight cold rolled mild steel complete all as specified and as directed.

S&F 75mm size butt hinges, medium weight cold rolled mild steel complete all as specified and as directed.

S&F Extruded aluminium alloy handles, 150mm in size, fabricated type, anodised complete all as specified and as directed.

S&F Extruded aluminium alloy handles, 100mm in size, fabricated type, anodised complete all as specified and as directed.

M&L Steel water tubing, medium grade, 15mm bore galvanised with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.

All as per Serial Item 55 above but except tubing.

M&L Steel water tubing, medium grade, 20mm bore galvanised with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.

All as per Serial Item 57 above but except tubing.

Preparation of new plastered surfaces by using necessary filling compound of Altek/Birla white putty to obtain smooth/even finish using sand paper and applying two coats of distemper oil emulsion over a coat of alkali resistant cement based priming paint complete all as specified and directed.

Preparation of old plastered or un-plastered surface by brooming down or steel wire brushing,scraping down smoke soot, moulds moss and efflorences salts and trading oil and greasy spots and filling nails marks with compound of wall putty and sand papering and applying two coat of distemper oil emulsion white or tinted, over a coat of alkali resistant priming paint, complete all as specified and directed.

Complete removal of existing treatment and applying two coats of cement based paint on old decorated or undecorated wall surface, complete all as specified and directed.

Prepration of new plaster surfaces of wall and applying two coats of cement based paint over a coat of alkali resistant cement base primer on wall surfaces complete all as specified and directed.

Preparation of old wooden painted surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Preparation of new wood and wood based surfaces of any description exc 10cm with or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

Preparation of newly or previously untreated steel surface exc 10 cm width or girth and applying two coats of synethic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S&F Vitreous china wash down water closet (pedestal pattern) white complete, including connection to drain pipe and to flushing pipe antisyphonage pipe etc, fixed in repair, complete all as specified and as directed.

S&F Vitreous China squatting pan, Orissa pattern size 580mm x440mm white with incl foot rests incl CI 'P' trap (excl flushing cistern and flush pipe) including provision of PCC 1:5:10 type E2 bedding fixed in repair complete all as specified and directed

S&F PVC valveless, syphonic action type, flushing cistern, 10ltr capacity, low level, white, with inlet ball valve, float and handle including 32mm bore PVC flushing pipe, brackets fixed as in repairs including taking down existing flushing cistern of any description complete all as specified and directed

S&F Vitreous china wash hand basin, fixed in repair white, oval shape, of size 550 x 400mm including 32mm dia CP brass waste coupling, 32mm dia PVC waste pipe, cast iron brackets and making good disturbed surfaces in cement mortar 1:3 or PCC 1:2:4 complete all as specied and directed.

S&F Toilet paper holder, brass, chromium plated, heavy duty, fixed in repair with brass screw complete all as specified and as directed.

S&F Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets, guard and railing 60cm long fixed in repair complete all as specified and as directed.

S&F Shower rose, brass, chromium plated, 125mm dia with or without swivel joint, with & including CP brass arm and wall flange, fixing to steel pipe or union as in repair complete all as specified and directed. Make : Jaquar, Cera or equivalent as approved by GE

S&F Bib taps, brass, chromium plated, fancy type, long nose, with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection fixed in repairs complete all as specified and directed. Make : Jaquar, Cera or equivalent as approved by GE

S&F Angle valve, brass, chromium plated, fancy type, with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection fixed in repairs complete all as specified and directed.

S&F Stop valves, brass, fancy type, chromium plated with long shank and cup (concealed type), screwed down high pressure, with capstan head handle, screwed both ends for iron pipe or for unions and fixed.

S&F PVC flexible connections 450mm long 15mm dia with brass flange nuts & washers complete all as specified & directed.

S&F PVC flexible connections 600mm long 15mm dia with brass flange nuts & washers complete all as specified & directed.

S&F Single lever wall mixture, 3 in 1 type, brass, chromium plated, fancy type, with capstan head handles with lettered 'hot' and 'cold', screwed down high pressure, including CP brass wall flanges and necessary extension nipples screwed for 15mm bore pipe connection, fixed in repair, complete all as specified and directed.

S&F Centre hole mixer for mixing hot & cold water for wash hand basin, cast copper alloy, with dual capstan heads, chromium plated, screwed down high pressure, with lettered 'Hot' & 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe suitable for 15mm bore, fixed in repair complete all as specified and directed.

S&F CP brass grating 100mm dia, centre hole, fixed in repair complete all as specified and as directed.

S&F CP brass grating 100mm dia, fixed in repair complete all as specified and as directed.

S&F Plastic water closet seat, white, closed pattern with flat bottom, cover and mild steel chromium plated or aluminised hinging device fixed in repairs complete all as specified and directed.

S&F Jet spray, brass, chromium plated, heavy duty, including flexible pipe suitable for 15mm bore water connection; for EWC fixed in repair complete all as specified and as directed.

S&F Tumbler holder, brass, chromium plated, heavy duty, having suitable recesses made for hanging necessary bath items complete fixed in repair with brass screws as per manufacturer's instructions. Make: CERA cat part No. CA104 or equivalent as approved by GE.

S&F Soap dish, brass, chromium plated, heavy duty, fixed to wall with plugs with brass cadmium plated screws, fixed in repair complete all as specified and directed.

S&F Tubular towel rails, brass, chromium plated, heavy duty, D-type, 20mm dia & 60cm long between flanges fixed in repair complete all as specified and as directed. Make : Jaquar, Cera or equivalent as approved by GE

S&F rolled mild steel section of angle, tee, flats,and plates as in roof trusses, purlines, rails, etc and the like fixed with angle cleats and connecting plates Gde FE-410-0 or FE-310-0 all as specified and directed .

Dismantling water storage tanks or any description and in any position, capacity not exc 500 Ltr and fixing rotational moulded polythene water storage tank cylindrical vertical with closed top 500ltr capacity hoisted and fixed in position, connecting to inlet and outlet pipe connections, with and including ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule of 20mm bore and 32mm dia GI wash out with plug complete all as specified and directed.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth in any type of soil; for foundation, etc and getting out complete all as specified and directed.

M&L PCC 1:4:8 type D-2 as in foundation and mass concrete complete all as specified and directed.

M&L Broken stone hard core of gauge n exc 63mm deposited spread and levelled in layers n exc 15 cm watered and rammed to a true surfaces complete all as specified and directed

Returning filling in including spreading levelling watering and well ramming in layers n exc 25 cm thick complete all as specified and directed

Filling under floor including spreading levelling watering and well ramming in layers n exc 25 cm thick complete all as specified and directed

Removel of surplus soil to a distance n exc 50m and depositing where directed at a level n exc 1.5m above from the starting point complete all as specified and directed.

Damp proof course 40mm thick in cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate mixed with integral water proofing compound, to horizontal or vertical surfaces including necessary form work complete (integral water proofing compound to be measured separately as supply only).

Supply only Integral waterproofing compound

M&L RCC(Nominal Mix) type B-1, 1:2:4 using 20mm graded crucshed stone aggregate as in lintel , beams and similar items of work over 1.5 m span etc complete all as specifie and directed.

M&L RCC (Nominal Mix) type B-1 1:2:4 using 20mm graded crucshed stone aggregate as in foundations,including rafts, footings, foundation beams,plith beams,bases for coloumns etc etc complete all as specified and directed.

M&L RCC ( nominal Mix ) type B-1 1:2:4 using 20mm graded crucshed stone aggregate as in coloumns,pillars,piers,posts,and struts etc complete all as specified and directed.

M&L RCC (Nominal Mix) type B-1 1:2:4 using 20mm graded crucshed stone aggregate as in chajja and similar work of flat surface etc complete all as specified and directed.

M&L 50mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection finished even & smooth with out using extra cement incl making joints 10mm wide and 30mm deep at spacing n more than 2.5m and at corners at mandatory and filled with sealing compound grade A complete all as specified and directed.

M&L 100mm thick PCC 1:4:8 type D-2 as in sub base of floor using 40mm graded crushed stone aggregate complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, complete all as specified and as directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions, complete all as specified and as directed.

Form work fair finished to chullah hoods,chajjas and similar works complete all as specified and directed.

Form work, fair finished to sides and soffits of floor or roof beams, beam haunchings girders, bressummers, lintels, cantilevers, shelves including supports, overhanges etc also splays between floors and beams etc complete all as specified and directed.

M&L 15mm thick rendering on brick work surfaces in CM 1:6 finished fair and even without using extra cement complete all as specified and directed

M&L 15mm thick rendering on brick work surfaces in CM 1:4 finished fair and even without using extra cement complete all as specified and directed.

M&LVitrified ceramic tiles 10mm thick (square) polished , coloured, light shade, area of each tiles exc 0.18 sqm but n.exc 0.38Sqm (min. size 600mm x 600mm) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement incl 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&LVitrified ceramic tiles 10mm thick (square) polished, coloured, dark shade, area of each tiles exc 0.18 sqm but n.exc 0.38Sqm (min. size 600mm x 600mm) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement incl 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&LVitrified ceramic tiles10mm thick, polished, coloured, light shade in pieces of required width cut out of 600mm x 600mm size, in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including10 mm thick rendering in cement mortar 1:3 complete all as specified and directed.

M&L Wall cladding tiles in vertical surfaces 200 to 250mm x 50mm x 7 to 8mm thick, set and jointed in neat cement slurry on external surfaces of wall and colour match with existing tiles, complete all as specified and directed by Engr-in-charge.

S&F Cast iron body door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters upto 1.0 mtr in width complete all as specified and directed

S&F Aluminium frame for doors/partitions powder coated of any colour (thickness or powder coating not less than 50 micron), windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified

S&F Aluminium sliding door shutters/partitions of powder coated, with aluminium section weighing 0.55 kg/m, powder coated of any colour (thickness or powder coating not less than 50 micron), including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, mortice locking arrangement, hinges, anodised aluminum snap beading screws, door stopper etc.; panelled (two panels), filled with 5mm thick PVC sheet manufactured by Rajshree Indore or equivalent or 5.5mm thick frosted glass; fitted with rollers, bottom and upper guide channels, complete all as specified complete all as spd and as directed.

S&F Aluminium sliding window, ventilator shutter of powder coated, side hung type, without sash bars, aluminium sections weighing 0.55 kg/m (thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

S&F Stainless steel drapery rod 25mm dia with fancy type stainless steel end knobs and fixing brackets complete all as specified and as directed. Fixed in repair

S&F Anodised aluminium powder coated snap grid frame work for flase ceiling fixed to surrounding wall and hangers 6 mm dia GI (Upto 1200 mm length) adjusting level fixed to roof with GI flat 40 x 3mm size 60mm long and expansion hold fasteners all as specified and directed by Engr in Charge.

S&F Aluminium anodised powder coated 0.6 to 0.7mm thick ceiling board of size 585mm x 585mm in size (thickness or powder coating not less than 50 micron) including necessary dotted portion of size 545mm x 545mm along wih insulation sheet and matching to existing ceiling, complete all as specified and directed as per Engr-in-charge.

S&F Galvanized corrugated0.63mm thick mild steel sheeting with two corrugation side lap, fixed with L-type or J-type or cranked hook bolts in roofs walls etc of class 8, complete all as specified and directed.

S&F Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip & straight flashings (length & girth as fixed) with grade of zinc coating 275 of 0.63mm thick complete all as specified and directed.

S&F Roof trusses (framed) trussed purlins,crane gantries, rails and fastnings and heavy brackets framing (eam,tee,angle,channel or flat sections) with Fe-410 W ( Gde-E 250 quality B) including distance pieces , cleats etccomplete all as specified and directed.

S&F Mild steel bolt n. exc 12mm dia; hexagonal or square head one end and screwed other end to be fitted with washers and nut is 30mm to 40mm long, complete all as specified and directed.

S&F 40 mm thick Flush shutters, solid core construction, with particle board core & plywood face panels, commercial type on both sides complete all as specified and directed

S&F Brass 4 levers Mortice lock, vertical type, size 100mm complete all as specified.

S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified.

S&F 140mm long Floor door stopper of aluminium alloy body & tongue, anodised, with hard drawn steel spring complete all as specified and directed.

M & L 0.9 mm thick Decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per maker’s instructions all as specified and directed .

Decorative type powder coated one side steel sheet eaves boarding 0.23 wide complete all as specified and directed.

Complete removing existing treatment including scraping,removing all mud,cake with wire brush and gunny bags from old plastered surfaces and preparation of surfaces by using of Altek/Birla white putty in two layers 2mm thick to obtain smooth/even finish using sand paper and applying two coats of distemper oil emulsion over a coat of alkali resistant cement based priming paint complete all as specified and directed.

Preparation of old steel surfaces exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as spd and directed.

Rifixing door/window wooden shutter of any description exc 1.00 Sqm and not exc 2.00 Sqm each in same opening after taking down,easing and adjusting and also refixing builders hardware as required; complete all as specified and directed.

Taking down carefully existing aluminium/copper point wiring on batten or in PVC conduit or in MS conduit with GI wire etc (for light, fan, socket or power) complete and making good the disturbed surfaces of walls, floors, ceilings etc to match with existing all as specified and directed.

M & L for point wiring complete with PVC insulated and unsheathed, Flame retardant low smoke ( FRLS ) 1100 volt grade electric cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core in and including rigid PVC concealed conduit not less than 19 mm dia, clip, with suitable MS terminal boxes ( not less than 1.0 mm thick )and painted with one coat of red oxide primer all around and two coats of black bituminous paint including earth dolly with 3 mm thick plastic laminated sheet top cover of approved colours including 1.50 sqmm green solid copper conductor as continuous earth wire with all accessories including lugs required, complete all as specified and directed for the following :-(a) One light/fan point controlled by one switch SP-230 Volts Make of wire : Havells/KEI/HPL. Note :- Modular white cover plate with frame and metal flush box will be measured and paid under respective items.

(b) One 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.

(c) One 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.

All as per item No 136 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, flame retardant Low Smoke ( FRLS ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 1.5 sqmm green solid copper conductor as continuous earth wire with lugs complete all as specified and directed.

S & F switch piano flush button type 5 Amp single pole one way complete all as specified and directed.

S & F switch piano flush button type 15 Amp single pole one way complete all as specified and directed.

S & F Switch and socket outlet 3 pin 5 Amp AC 230 Volts piano flush type , complete all as specified and directed.

S & F Switch and socket outlet 6 pin 15 Amp AC 230 Volts piano flush button type (multipurpose) complete all as specified and directed

S 7 F fan regulator electronic rotary 0-4 steps step type 100 watt, 240 Volt 50 Hz complete all as specified and diredted.

S & F Ceiling rose three terminals polycarbonate , isolated body complete all as specified and directed.

S & F lmp holder insulted body PVC/polycarbonate with back plate suitable for batten fitting complete all as specified and directed.

S & F LED 7 W ( candle/ball type) with B-22 base, complete all as specified. Make :- Havells/surya

S & F Energy Efficient LED tube light fitting of 18 Watt capacity with aluminium extructed body and diffuser for control. Make : Surya/Havells/Philips

S & F sheet metal enclosure double door for mounting MCBs with 200A rated bus bar 4 way AC 230 Volt with IP-43 protection complete all as specified and directed.

S&F MCB SPN 40 amps, 240 V, 50 Hz made from moulded self-extinguishing thermostat plastic and suitable for 'C' curve, 10 KA breaking capacity.

S&F MCB SP 6-32 amps, 240 V, 50 Hz made from moulded self-extinguishing thermostat plastic and suitable for 'C' curve, 10 KA breaking capacity.

S&F submain wiring with 2x6 sqmm FR PVC insulated copper conductor along with 1 x 4 Sqmm PVC insulated copper conctor as earth continuity conductor including suitable size of PVC conduit complete all as specfied and as directed.

S&F exhaust fan light duty AC single phase 230 volt 50 Hz of size 300 mm sweep, complete with louvers, shutters and connecting up ceilling rose to connector block of fan including making of holes and grouting of nuts and bolts PCC (1:2;4) B-1 block complete all as specifed and directed. Make ; Havells/Usha/Crompton

S&F MCB SPN 32 amps, 240 V, 50 Hz made from moulded self-extinguishing thermostat plastic and suitable for 'C' curve, 10 KA breaking capacity. Make : Legrand/Havells/Indo Asian

S & F stepped type electronic fan regulator flush type on laminated sheet complete all as specified and directed.

S&F aesthetically designed 2x2 LED flat panel for surface ounting which provide soft light and glare free symmetrically illumination Cat Pt No-PLUTOSURFACE2X2PLS34WLED840S Make : Havells or equivalent Bajaj/wipro

S & F ceiling fan 5 star complete single phase 230V, 50 Hz, 1200 mm sweep complete with twine core flexible copper conductor. Make : Havells/Bajaj/Usha

S & F exhaust fan (heavy duty) AC single phase 230/240 V of size 450 mm sweep with luber Make : Havells/Bajaj or in equivalent.

S & F sheet metal enclosure double oor for monting MCBs with 400 A rated bus bar 4 way VTPN DB with IP-43 protection complete all as specified and directed. Make : Indo Asian Cat No 811888 or equivalent in Hager/Havells

Supply, laying and testing cable XLPE insulted, screened, PVC bedded, galvanized steep strip or wire armoured electric cable (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 4 core.

M&L for sand cushion to under ground electric cable all as per claused 19.75 MES schedule Part-I complete all as specified and directed.

M&L for old size bricks well burnt as covering to under ground cables class 'B' for protection of cable complete all as specified and directed.

S & F optium 1.0 (fixed TM range) suitable for isolation, fixed overload and fixed short circuit setting four pole 125 amps, 415 volt, 50 Hz 36kA complete all as specified and directed. Make : Indo Asian Cat No 830083 or in equivalent in Havells/Legrand.

Earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore ( light grade) and watering pipe 20 mm bore GI pipe (light grade ) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20 mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. complete all as specified.

M&L wooden laminated flooring in strips 120cm longx20cm wide and 6 to 8mm thick fixed over existing surface with PVC sheet as cushion as per manufacturer instructions and direction complete all as specified and directed by Engr-in-charge.(Make-Pergo,Vista,green ply or equivalent)

M&L 15mm thick 1st class soft wood austrelian wood paneling fixed with tounged and grooved joint as in wall including preparation of surface and applying two coat of varnishing over a coat of primer complete all as specified and directed.

S&F switch modular 6 Amps 230 Volts one way switch . Make : Anchor,Roma/Legard,Aretor/Crabtree

S&F Modular white cover plate with frame 6 module and metal flush box 6 module complete all as specified and directed. Make : Anchor,Roma/Legard,Aretor/Crabtree

S & F LED light fitting fixture 20W, decorative ultra slim with co extruded channel in thermally conductive material with plastic housing, heat sink, environmental friendly energy efficient ready to use complete all as specified. Make-Havells(LHEXBXPNIN1WO20)/Wipro(LL20-221-XXX-65-NE)/HPL (HLPT51820PCGCW)/Philips (BN021CLED20SPSUCDLGR)

S&F 10 Watt 6000K LED Bulk head luminaries with opal diffuser, etc complete with accessories all as specified and directed. Make - HPL (HLPLEDBH10W(CW))/ Havells/HPL/CG)

All as per Ser item No 136 above but using 2.5 sqmm copper conductor cable (multistrand) PVC insulated FRLS (unsheathed) for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 1.5 sqmm green solid copper conductor cable as continuous earth wire with lugs complete all as specified and directed. Note : -Modular white cover plate with frame and metal flush box will be measured and paid under respective item :- Make of Wire : Havells/KEI /HPL

S&F Switch modular type AC 230 volts 16/20 Amps one way complete all as specified and as directed . Make : Anchor/Roma/Legard Aertor/Crabtree.

S&F modular 6 Amps AC 230 Volts 2/3 pin combined 2 module complete all as specified and directed. Make :Anchor/Roma/Legard Aretor/Crabtree.

S&F Socket modular 6A/16 Amps-2/3 pin combined AC 230 Volts 2 module complete all as specified and ds directed. Make : Anchor/Roma/Legard Aretor/Crabtree.

S&F switch modular 6 Amps230 volts one way switch. Make: Anchor/Roma/Legard Aretor/Crabtree.

M/S MIRCO CONSTRUCTION CO

M/S NORTHERN ELECTRICAL WORKS

M/S DFA Enterprises

M/S Taj Enterprises

M/S Ghulam Mohammad Shalla

M/S Gh Qadir

M/S TAJ DIN KHARI

M/S SUHEEL CONSTRUCTIONS