ADD ALTN AND SPECIAL REPAIRS TO NAVAL OFFICERS INSTITUTE (P 63) AT UNDER GE (NW) NOFRA COLABA MUMBAI

Amount

Demolition of cement concrete (unreinforced) of any description and in any position thickness not exc 15cm and removal of debris outside MD land complete all as directed by Engr-in-Charge.

Roughening/cleaning surfaces of roof/ top surface with wire brushing, sweeping clean and washing down with water to remove dust etc including removing of old treatment complete all as specified and as directed.

Material and labour for cement concrete 1:2:4 type B- 0 (12.5 mm graded agg) in roof padding concrete, kerbs or mud stops, rounded or chamfered on edges all around at the junction of parapet and the roof slab all as directed by Engr-in-Charge

Material and labour 10mm thick rendering in cement and sand mortar 1:4 on roof padding concrete surface for levelling course rounded or chamfered on edges, slopping mixed with water WPC @ 2% by weight of cement, finished even & smooth surface without using extra cement complete all as specified & directed. NOTE : (WPC shall be measured and paid seperately)

Material and labour protecting the roof with water proofing coating(Dr. Fixit) complete as specified below: (a) Wire brush the surface to remove loose particles & laitance wash with clean water. (b) Complete crack filling & reinstate damaged portion shall be filled with polymer modified mortar as recommended. (c) Allow the repair surface to cure for 24 hours afterwards wet the surface to a SSD condition (d) Apply one coat of primer by brush and allow to dry for 4 hours (e) Apply one coat of water proofing coating over the primed surface by brush (f) on the wet primed surface overlay a open- woven fiber glass mesh min 40 GSM of size 2mm x 2mm and allow it to soak completely (g) Immediately there after apply the second coat with a roller to ensure complete coverage of the fibre mesh (h) Apply the 3rd coat after 6 to 8 hours, once the 2nd coat is dry Make : Crack filler : Dr. Fixit crack-X Paste, Dr. Fixit crack -X shrinkfree, Shaliseal CPM of M/S STP Ltd Prime Coating : Dr. Fixit Primeseal Water Proofing Coating : Dr. Fixit Newcoat, Waterseal concentrate of M/s Krishna Conchem Products, Shalicry 215 of M/s STP Ltd.

Preparing of new/old surfaces of walls/ceiling washing the surface thoroughly, filling the cracks, creaves with crack filling compound as suggested by the manufacturers and applying two coats of Rain coat manufactured by Dr Fixit of Piddilte Industries Ltd. (shade to match the existing paint) all as specified and as directed by Engineer in Charge.

Taking down CI/rain water pipes/PVC pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks, etc., including cleaning etc and fixing at any position /height complete all as specified and directed.

Supply and fixing 110mm dia PVC (SWR) pipes single socketed,in any length with rubber ring joints, fixed in wall including GI clamps of approved shape and size approved by GE at any height, any location, any floor including necessary scaffolding complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing 110mm dia PVC (SWR) bends/shoes any radius fixed to pipe at any location/height including necessary scaffolding etc complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing 75mm dia PVC (SWR) pipes single socketed,in any length with rubber ring joints, fixed in wall including GI clamps of approved shape and size approved by GE at any height including necessary scaffolding complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing 75mm dia PVC (SWR) bends/shoes any radius fixed to pipe at any location/height including necessary scaffolding etc complete all as specified and as directed by Engineer-in-Charge.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed by Engineer-in-Charge.

Material and labour Mild steel Framed work (Fe 410 or Fe 310) such as purlins frame work, gratings, sheet including welding to purpose made hinges etc with the end of bars shoulders or riveted or forged into spikes framed guard bars railing and similar works fixing with bolt etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specifie complete all as specified and as directed by Engineer-in-Charge.

Material and labour .80mm plain galvanised mild steel sheeting as in ridges hip valley gutters drip and straight flashing with grade of zinc coating 275 gm/sqm complete all as specified and as directed by Engineer-in-Charge.

Material and labour preparation of new Steel surface with synthetic enamel paint of two coats in any description over 10cm in width or grith, not otherwise described, over a coat of Red oxide, zinc chrome, complete all as specified and as directed by Engineer-in-Charge.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 18 to 20 mm thick granite work as in steps, jambs, pillars, window- cills, cooking platforms platformwork/ counter to fix wash basin in cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with the shade of granite complete all as specified and as directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling (fixed at any portion but not backing) including cement mortar bedding and removing rubbish outside off the premises (outside MoD land) complete all as specified and as directed by Engineer-in-Charge.

Material and labour coloured Virified tiles of Dark Shade/Double charged/ ultracharged tiles of 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, laid in floors including cement mortar screed bed of 20mm thick in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-Charge. (Note - Pattern, Finishing, Shade, Colour as approved by GE)

Material and labour coloured Virified tiles of Dark Shade/Double charged/ ultracharged tiles of 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, laid on vertical surfaces such as Dado/Skirting including cement mortar screed bed of 20mm thick in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-Charge. (Note - Pattern, Finishing, Shade, Colour as approved by GE)

Material and labour for Non Skid rectified ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc.set laid in flooring with 15mm screed bed in cm 1:4 including levelling the floor etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directedthe following situations.

Material and labour coloured glazed rectified ceramic tiles 300 X 450 X 7mm thick as on vertical surfaces such as in dado/ skirting over & incl 15mm thick backing coat in cement mortar 1:3 set jointed in neat cement slurry and pointed in white cement mixed with pigment to match the coloure of tiles complete all as specified and as directed.

Demolition of reinforcement cement concrete as in roofs, floor (other than ground floor), beams, stair case, landing, chajja and other similar suspended work etc including removing of debris complete all as specified and as directed by Engr-in-Charge. Note: - (i) Contractor should take all safety precaution and ensure no damage to inside building structure with using required scaffolding.

Material and labour for Mild steel TMT bars 10mm dia & over, cut to length ,bent to shape required including cranking, bending , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia.including necessary scaffolding etc complete all as specified and directed.

Material and labour for Mild steel TMT bars 6-8 mm dia & over, cut to length ,bent to shape required including cranking, bending , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia. including necessary scaffolding etc complete all as specified and directed.

Material and labour for Building up the profile of structural members by using latex additives(MONOBOND) modified air cured mortar system (Polymer modified mortar) (1:5:15 = 1 monobond-5Cement-15 sand) -in damaged areas in 30mm thickness including leveling profiling etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Clean existing reinforcement with wire/rotary wire brush, making the surfaces free from loose material dirt etc, complete, applying two coats of alkaline rust converting primer FEOVERT confirming to ASTM-B-117, on the rebars, including cleaning the reinforcement, wire brushing to remove loose rust spalls, with time interval of 6 hour between the coats and applying protective coating IPNET-RB complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Providing and applying structural grade EPIBOND-21-LP prior to application of any type of mortar plaster confirming to ASTM-C-882-91 (Arizona Slant Shear Test) to ensure bond between old concrete and new concrete complete all as specified and as directed by Engineer-in-Charge.

Material and labour reinforced cement conrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in beams, cantilevers, lintels over 1.5 m span complete all as specified and as directed by Engineer-in-Charge.

Material and labour Use of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

Material & labour for repair to damaged surface of RCC elements like beams, columns, wall by removing all loose cement plaster/concrete, providing and laying of microconcrete at least upto 20mm thickness (average) by using the recommended water powder ratio (mix the microconcrete with pan mixer as per manufacturer's instruction) including watertight shuttering & necessary curing for 7 days complete all as specified and directed by Engineer-in-Charge. Note : (i) Rate of Micro concrete is included in this item (ii) The work shall be carried out through authorised applicator of Dr Fixit/Build Ultratech/ACC/Pidilite as approved by GE

Material and labour for preparation of old steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge. complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 100 mm dia Cast iron Nahni trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) & making good all as specified & directed by Engineer In Charge

Supply and fixing in repairs stainless steel grating cover 100mm dia fixed in repairs complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing 4mm thick glass sheet ordinary quality frosted on one side, n exc 0.5Sqm in each pane,fixed to Aluminium windows complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing 3mm thick glass sheet ordinary quality and glazing with oil putty fixed with beads n.exc 0.5SQM in each pane complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repair aluminum anodised GRILL (Deco grill DG 103 of 7.5 mm thick of M/s ELESAR FOCCHI Ltd.) fixed with suifable 'F' section No. 8584 15.30 x 23.40 x 1.40mm fabricated and rivetted to aluminum windows, complete all as specified and directed by Engr-in-charge.

Supply and fixing powder coated (50Micron minimum thickness) aluminum frame & shutter for door ,windows,ventilators etc.with one or more rebates including jointing cleat for fixing etc.fixed type/louvered window or ventilator without sash bar,aluminum including necessary joining cleats,glazing clips,rubber packing,anodised aluminum snap beading,screws, sliding rollers, Rubber gasket etc.complete all as specified and as directed by Engineer-in-Charge. Note:a)Glazing shall be measured seperately. b)Item shall be paid as per weight of alluminium section.c)the rate quoted shall be inclusive of neoprene beading,glazing clips,screws, etc., as required which shall not be measured for arriving the weight.d)the rate shall be inclusive of the locking arrengement including complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing surface area.

Supply and fix 5.50 mm thick plain glass exc 0.5 SQM in EACH pane fixed to aluminium windows and iron frame complete all as specified and as directed by Engineer-in-Charge.

Demolition of brick work/stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and pre-cast concrete articles all as specified.

Material and labour for brick work with sub class ‘B’, old size, best quality bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) all as specified and directed.

Taking down cement plaster on brick wall including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed by Engineer-in-Charge.

Rendering 20mm thick on other then fair face of brick work or concrete in two coats 15mm thick cement mortar 1:4 and 5mm thick each coat mixed with water proofing powder at rate of 3% of cement or as per manufacturers instructions and at any height including necessary scaffolding complete all as specified and as directed by Engineer-in-Charge. Note:-(i)Water proofing compound shall be measure sepratly under respective item. (ii) Rate included for Necessary Scaffolding.

Material and labour preparation surfaces of new plastered surfaces wall/chajja and applying one coat of acrylic exterior primer and apply two coats acrylic emulsion exterior grade (100%) etc all as spacified & as suggested by the manufacturers at any height including necessary scaffolding complete all as specified and as directed by Engineer-in-Charge.

Supply only Integral water proofing compound

Material and labour preparation surfaces of old plastered surfaces washing the surface thoroughly, filling the cracks, creaves with crack filling compound wall/chajja and applying one coat of acrylic exterior primer and apply two coats acrylic emulsion exterior grade (100%) etc all as spacified & as suggested by the manufacturers at any height including necessary scaffolding complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Plastering 15mm thick on brick ,concrete or dubbed wall surfaces in cement mortar 1:4 finishing even and smooth without using extra cement to fascia,fins,parapet, soffits of chhajjas etc and similar likes at any height including necessary scaffolding, ladder, formork ; including taking down cement / lime plaster of any description on brick or stone walls etc, raking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for Plastering 10mm thick on ceiling concrete surfaces in cement mortar 1:3 finishing even and smooth without using extra cement etc and similar likes at any height including necessary scaffolding, ladder, formork ; including taking down cement / lime plaster of any description on brick or stone walls etc, raking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge.

Material and labour preparation of old plastered surfaces by complete removal of existing treatmentand applying two coat oil bound distemper on ceiling over a coat of alkaline resistent primer over and including a coat of putty to plumb the existing surface,any height including necessary scaffolding complete all as specified and as directed by Engineer-in-Charge.

Preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper etc complete at any height including necessary scaffolding all as specified and as directed.

Material and labour preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of alkaline resistent primer on ceiling any height including necessary scaffolding complete all as specified and as directed by Engineer-in-Charge.

Preparation of old plastered or unplastered surfaces & apply two coat of oil bound distemper on ceiling over a coat of primer and wall putty all as specified and directed.

Supply and fixing Aluminium wire mesh 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with wooden beads complete as specified and directed by EIC.

Supply and fixing Aluminium wire cloth 0.45mm nominal dia of wire and average width of operature 1.40mm and fixed to aluminium Vent/window all as specified and directed Engr-in-charge cost of aluminium beads and neoprene included in relevant item of aluminium window) in repairs.

Taking down chowkhat or frame n exc 1.5 Sqm each without taking off shutter of any discription complete all as specified and as directed.

Supply and fixing PVC door frame of size 50mm X 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tubecomplete all as per specification and all as per drawing. complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing factroy made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with neat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuct inside the solvent cement for styleand plain coloured PVC sheet for top rails, lock rails and bottom rails on either side and as gap insert for top rails and bottom rail panelling of plaincolour PVC sheet to be fitted in the MS frame welded to the style and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at sitecomplete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Aluminium alloy anodised barrel tower bolt 150mm long complete all as specified and as directed

Supply and fixing extruded aluminium alloy handle fabricated type anodized 150mm long complete all as specified and as directed

Supply and fixing stainless steel butt hinges of size 100mm complete all as specified and as directed by Engineer-in-Charge.

Material and labour for PVC shed canopy fixed complete with MS iron hollow square section and one side fixed with wall like chajjas etc including necessary screw and bolts, welding and including necessay scafolding complete all as specified and directed by Engr-in-Charge.

Material and labour for stainless steel (grade 304) sections for staircase railing work including grouting in steps, etc, design pattern shall be approved by GE, complete all as specified and directed by Engr in Charge.

Supply and fixing PVC low level flushing cistern with dual flushing system including brackets 5/10 litre capacity, with inlet ball valve float, handle,flush pipe etc. complete fixed as in repairs.

Supply and fixing in repaires 15mm pillar taps, cast copper alloy with captain heads chromium plated screw down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed

Supply and fixing stainless steel toilet paper holder fixed to walls in repairs with chromium plated brass screws complete.

Supply and fixing Table Top ceramic wash hand basin vitreous china oval shape It has a smooth finish and (Colour approved by GE) of size 630x425x160mm, make is Jauqar fonte with including brass chromium plated waste coupling 32mm with long screwed and fly nuts ,incl 60 cm long,32mm dia PVC(flaxible) type waste pipe fixed as in repairs ( cat part No JDS-WHT-25901) Make:- Grohe, Kohler.

Supply and fixing in repairs white vitreous china wash down water closet pan (pedestal pattern) with PVC seat cover including connection to drowm pipe and flushing pipe complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repairs, Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of old wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel tubing and connections and removing from store of following sizes, complete all as specified and as directed by Engineer-in-Charge.

(a) 20 mm bore

(b) 15 mm bore

Supply and fix steel water tubing galvanised medium grade of following size, with all fitting fixed complete to walls,duct and ceilings or laid in floor/wall/ceiling (in high rise building including scafolding) complete all as specified and directed. Make : Jindal

(a) 20 mm bore

(b) 15 mm bore

Cutting chases for concealed water tubing and making good in cement mortar 1:3 girth of cutting n.exc 10cm in brick walls complete all as specified and directed.

Supply and fix in repair hot water extention pipe made out of copper chromium plated 450mm long with brass adaptor and fixing in position complete all as directed.

Supply and fix in repair 450 mm long PVC connectors with brass adapters, washers etc complete all as directed.

Supply and fix fancy type chromium plated brass mixer unit 3 in 1 with wall flange suitable for 15mm bore GI tubing with necessary fittings complete all as specified. Make: Jaquar Cat Part No : FUS-29273UPR

Supply and fixing over head shower rose with Rubit cleaning system with shower arm and flange suitable for 15mm bore GI tubing complete all as specified. Make: Jaquar Cat Part No : OHS-1709

Supply and fix in fancy concealed type stop valve with long shark and adjustable wall flange including union suitable for 15mm bore GI pipe complete all as specified and directed. Make: Jaquar Cat Part No : CON-083KN

Supply and fix fancy type chromium plated brass angular stop cock suitable for 15mm bore GI tubing, with necessary fittings complete all as specified and directed. Make: Jaquar Cat Part No : CON-059KN

Supply and fix fancy type chromium plated brass Bib tap with wall flange suitable for 15mm bore GI tubing with necessary fittings complete all as specified. Make: Jaquar Cat Part No : CON-047KN

Supply and fix in repair chromium plated brass health faucit (hand shower) with 8 mm dia with 1 mtr long flexibale tube wall mounted / hooked all as per Cat Part No 573 of Jaquar or equvalent in Make MARC,Plumber.

Supply and fixing in repaires 15mm pillar taps, cast copper alloy with captain heads chromium plated screw down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge.

Supply and fix chromium plated brass Bib cock two way suitable for 15mm bore GI tubing and jet spray ccomplete all as specified and as directed by Engineer-in-Charge. Make: Jaquar Cat Part No : FLR-5041N

Material and labour for Makarana White/colour Marble work 18 to 20mm thick (table rubbed and polished) for floor and wall lining (veneering to wall) in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade etc complete all as specified and directed. (Note - Shade and Texture as approved by EIC & GE.)

Taking down carefully aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc. to be measured separately), removing materials for taking credit (credit of items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified.

Material and labour for point wiring complete with 1.5 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through & including PVC conduits, ISI marked with accessories concealed in wall/ceiling/truss etc with metallic ISI marked terminal boxes concealed in wall including one FRLS PVC insulated & sheathed multistranded green colour copper conductor 1.5 sqmm as earth continuity conductor connected to common earth as earth dolly for :-

(a) One light point controlled by one switch SP one way.

(b) One ceiling fan point controlled with one 5A switch

(c) One exhaust fan point controlled with one 5A switch

(d) One 3 pin socket outlet 5Amps on independant board.

(e) One 3 pin socket outlet 5Amps on same board with other switches.

(f) One bell point controlled by one bell push 5 Amps.

(g) one light point controlled by two 2- way switches

Material and labour for point wiring complete with 4 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through & including PVC non-metallic casing and caping of size not less than 25mm width, ISI marked with accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes concealed in wall including one FRLS PVC insulated & unsheathed multistranded green colour copper conductor 4 sqmm as earth continuity conductor connected to common earth as earth dolly complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Modular Switch , 6Amp, One way, 1 module.complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Modular Switch , 16Amp, One way, 1 module. complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Modular Switch , 6Amp, 2 way, 1 module.complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Modular type bell push , 6Amp, 1 module. complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Bell electric AC 230Volt single pole musical type with ISI mark complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Modular type, electronic fan regulator ( 5 step ), 100-80 Watts, 230 volts, 2 module complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing ceiling rose surface bakelite with ISI mark, flush type with ISI mark three terminals complete all as specified.

Supply and fixing Modular Socket oulet, 6 Amps, 2/3 pin combined 2 module. complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Modular Socket oulet, 6/ 16 Amps, 2/3 pin combined 2 module. complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Modular blank plate. complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Modular white cover plate with Frame 1 Module. complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Modular white cover plate with Frame 2 Module.complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Modular white cover plate with Frame 3 Module. complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Modular white cover plate with Frame 4 Module. complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Modular white cover plate with Frame 6 Module. complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Modular white cover plate with Frame 8 Module. complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Modular white cover plate with Frame 12 Module. complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Modular metal flush box 1 module. complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Modular metal flush box 2 module. complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Modular metal flush box 3 module. complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Modular metal flush box 4 module. complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Modular metal flush box 6 module. complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Modular metal flush box 8 module . complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Modular metal flush box 12 module.complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repair baton integral sleek extruded polycarbonate LED channel with white acrylic cover of 1x20 WH with accessories internally prewired and incl connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-Charge.

Supply and fix LED 25 watt recess-mounted round downlight with aluminium die cast housing having cut out dia 157mm & height 87mm, CCT-4000 K complete all as specified.

Supply and fix LED 06 watt recess-mounted round downlight with aluminium die cast housing having cut out dia 107mm & height 20mm, CCT-3000 K complete all as specified.

Supply & fix Sauver Reccess mounted LED Panel made from extruded aluminium housing surface 2 ft x 2 ft of 36 capacity, 4000K complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing baton intergrated LED channel 1x10 WH accessories internall prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed by Engineer-in-Charge.

Taking down MCB DB of any type, single phase including disconnection of all circuits complete with MCBs etc complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing 12 way Double door type having protrection IP-42, with 200 Amps rated bus bar connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing MCB SPN 63 Amps, 240 Volts, C Series . Make Legrand Model No 408620 complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing MCB SP 6-32 Amps, 240 Volts, C Series . Make Legrand Model No 408595 complete all as specified and as directed by Engineer-in-Charge.

Supply & fix in repair MCB DB, TPN 8 way vertical type, 415 V with 200 Amps rated bus bar and double door connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as directed, comprising of the following : - (a) MCCB 3 Pole, 415 V fixed type, 160 Amps with breaking capacity 25 KA-01 Nos (incoming) (b) MCB TP 63 Amps, 10KA - 06 Nos (B Series) (Outgoing) (c) MCB SP 40 Amps, 10KA - 06 Nos (B Series) (Outgoing)

Taking down old unserviceable submain cable of any size and capacity and finishing wall surfaces complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing 2 single core FRLS 1100 volts grade cable with stranded copper conductor of size 4 Sqmm in and including including PVC conduits of suitable size not less than 25mm width, ISI marked including 1 single core cable with stranded copper conductor of size 4.0 sqmm (green colour) for earthing. Note : 2 runs of 4Sqmm cable, 1 run of PVC conduits and 1 run of 4.0 Sqmm cable shall be measured as 1 Run.

Supply and fixing four single core 6 Sqmm for sub main wiring with copper conductor multistranded PVC insulated and unsheathed 1100Volts grade in & including PVC conduits of width 25mm including two runs of 6.0 Sqmm copper conductor including cutting chases on wall for fixing of terminal box and making good surfaces complete all as directed. (Note - Four runs of 06 Sqmm cable & two runs of 6.0 Sqmm earth cable shall be measured as one running meter.)

Supply and fix 2 single core FRLS 1100 volts grade cable with stranded copper conductor of size 10 Sqmm in and including PVC conduits of suitable size not less than 25mm dia including 1 single core cable with stranded copper conductor of size 10 sqmm (green colour) for earthing. Note : 2 runs of 10 Sqmm cable, 1 run of PVC casing caping and 1 run of 10 Sqmm cable shall be measured as 1 Run.

Taking down old UNSV water heater of any type / capacity from site.

Supply and fix in repair & painting of storage type water heater (geyser) vertical type of 25 Ltrs capacity , & replace the thermostat & element of suitable size, including fixing on wall with chroumium plated screws & nut bolts connected to existing water and electric connection complete all as specifed and directed by Engr-in-Charge.

Supply and fix RCCB with MCB of 2 Pole, 10 Amps rating with sensitivity of 30 mA suitable for 240 Volts complete all as specified and directed. complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 15 Amps plug top, AC 230 volts, ISI marked.

Taking down ceiling/exhaust fan, sealing cable end, dismantling blades and removing fan and blades to MES E/M Store ,all as directed by Engr-in- charge.

Rewinding of Ceiling Fan of size 1200mm /1400 mm Sweep with approved copper enamelled wire of suitable gauge varnishing replacement of capacitor rubber packing including provision of flexible 2 core copper cable etc and testing and painting the same after filling cavitiy complete all as specified and directed.

Rewinding & Painting of Exhust Fan 230 mm sweep with approved copper enamelled wire of suitable gauge varnishing, replacement of suitble size louvers including provision of flexible 2 core copper cable etc and testing and painting the same after filling cavitiy complete all as specified and directed.

Rewinding & Painting of Exhust Fan 450 mm / 600 mm sweep with approved copper enamelled wire of suitable gauge varnishing, replacement of suitble size louvers including provision of flexible 2 core copper cable etc and testing and painting the same after filling cavitiy complete all as specified and directed.

Supply & Fix wall fan of size 400mm Sweep (16"), ISI marked, BEE 5 Star rating and connecting up to ceiling rose, testing, smooth functioning at site complete all as specified and directed by the Engineer-in-Charge. Note:- (a) Taking down U/S W/Fan of any capacity will be deposited in MES store yard

Supply and fixing Rigid non-metallic PVC casing caping/conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc of medium grade, ISI mark, 25mm width double lock, for cable TV, internet, telephone cable complete all as directed.

Supply and fix modular single pole & neutral enclosure with a two pin earth plug and socket complete with one single pole MCB 20 Amps complete with modular box & modular plate complete all as specified.

Supply and fix Modular Triple pole and earth enclosure with a three pin and earth plug and socket complete with one triple pole MCB 32 Amps complete with modular box & modular plate including cutting chases on wall complete all as specified and as directed by Engineer-in-Charge.

ASHOK CONSTRUCTION

S S ENTERPRISES

SHREE JAGDISH FURNITURE CO.

DHARICHHAN ENTERPRISE