Providing earthings and wiring at new site H-14 Site-IV ,Greater Noida.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. (a) Group A

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. (a) 5/6 amps switch

3 pin 5/6 A socket outlet

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 x 4 Sq.mm + 1 x 4 Sq.mm earth wire.

4 x 4 Sq.mm + 2 x 4 Sq.mm earth wire.

Supply & Fixing metal box of 180 mm x 100 mm x 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front i/c providing and fixing 6 pin 5/6 & 15/16 Amps socket outlet and 15/16 Amps piano type switch connection, painting etc. as required.

S/Fixing 20 watt LED 4 feet tube fitting suitable for single phase, 230 volts AC supply system connection etc complete as required.(M/s Cromption/ Philips or S.S make)

Supply and fixing of 1400 mm sweep resistance type ceiling fan, suitable for operation on 230 volts 50 Hz. A.C. Supply including wring with 1.5 Sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (M/s Havells / Crompton make)

Supplying and fixing stepped type electronic fan regulator on the existing switch box including connections etc. as required.

Supplying and fixing following way prewired TP&N MCB DB of steel sheet for 415 volts on surface/ recess complete with loose wire box, terminal connectors for all incoming and outgoing circuits, duly prewired with suitable size FR PVC insulated copper conductor up to terminal blocks, tinned copper bus bar, neutral link, earth bar, din bar, detachable gland plate, interconnections, powder painted i/c earthing etc. as required. (But without MCB/ RCCB/ Isolator) [M/s Legrand Cat No. 507725 or SS Make] (a) 4 way (8 + 12), Double door VTPN DB

S/Fixing of following rating MCBs in the existing MCB DB complete with connection, testing & commissioning etc. as required. [M/s Legrand make] (a) 5-32 Amp SP MCB –‘C’ Series

5-32 Amp Triple Pole MCB –‘C’ Series

63 Amp Four pole Isolator

Blanking plate

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Supplying & Fixing 4 sqmm FRLS PVC insulated Cu conductor single core cable on surface/recess/ exsiting cable treys as reqd. (for neutral earthing )

Pdg.& fixing 6 SWG GI wire on surface or in recess for loop earthing alongwith the existing surface/recessed conduit / submain wiring / cable etc.as required.

Supplying and Laying of 4 x 16 Sq.mm LT armoured cable of multicore aluminium conductor, PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade on wall surface as required.

Supplying and Laying of 4 x 16 Sq.mm LT armoured cable of multicore aluminium conductor, PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade in the existing masonry open duct as required.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. (a) 4 x 16 Sq.mm

Supplying and fixing following accessories, connection etc. (a) Porcelene KIT KAT 63 Ampr 415 Volt Make (Havells or similar superior make)

Neutral Link and insulators

Lugs bottle type /10 sqmm/16 sqmm/25 sqmm

Bakelite sheet 6mm for Kit Kat Board

Angle Iron 35 mm x 5mm for Kit Kat Board

Free cooling units in BTSs Supplying & fixing 300 mm sweep Heavy Duty Exhaust Fan suitable for 230 V 50 HZ AC Supply i/c making opening in brick wall / window/ Shelter for fixing of unit, connection with 3x1.5 sqmm PVC insulated and FR PVC round Sheathed Cu conductor flexible cable on surface/recess/ exsiting cable treys , testing etc (Exhaust Fan Make-- Crompton / Havells/ Bajaj or similar superior make ) (b) S/F of M.S. jali with frame & rain protection cover in outer side of Exhaust Fan , painting etc. c) S/F of 200 mm x 300 mm M.S Jali & Wire cage with frame as inlet of Air, Painting etc. - 02 Nos.

M/s Mohit Engineers